From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- include/sound/seq_device.h | 86 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 include/sound/seq_device.h (limited to 'include/sound/seq_device.h') diff --git a/include/sound/seq_device.h b/include/sound/seq_device.h new file mode 100644 index 000000000..3137d4c5f --- /dev/null +++ b/include/sound/seq_device.h @@ -0,0 +1,86 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __SOUND_SEQ_DEVICE_H +#define __SOUND_SEQ_DEVICE_H + +/* + * ALSA sequencer device management + * Copyright (c) 1999 by Takashi Iwai + */ + +/* + * registered device information + */ + +struct snd_seq_device { + /* device info */ + struct snd_card *card; /* sound card */ + int device; /* device number */ + const char *id; /* driver id */ + char name[80]; /* device name */ + int argsize; /* size of the argument */ + void *driver_data; /* private data for driver */ + void *private_data; /* private data for the caller */ + void (*private_free)(struct snd_seq_device *device); + struct device dev; + unsigned char args[]; /* driver-specific argument */ +}; + +#define to_seq_dev(_dev) \ + container_of(_dev, struct snd_seq_device, dev) + +/* sequencer driver */ + +/* driver operators + * probe: + * Initialize the device with given parameters. + * Typically, + * 1. call snd_hwdep_new + * 2. allocate private data and initialize it + * 3. call snd_hwdep_register + * 4. store the instance to dev->driver_data pointer. + * + * remove: + * Release the private data. + * Typically, call snd_device_free(dev->card, dev->driver_data) + */ +struct snd_seq_driver { + int (*probe)(struct snd_seq_device *dev); + void (*remove)(struct snd_seq_device *dev); + struct device_driver driver; + char *id; + int argsize; +}; + +#define to_seq_drv(_drv) \ + container_of(_drv, struct snd_seq_driver, driver) + +/* + * prototypes + */ +#ifdef CONFIG_MODULES +void snd_seq_device_load_drivers(void); +#else +#define snd_seq_device_load_drivers() +#endif +int snd_seq_device_new(struct snd_card *card, int device, const char *id, + int argsize, struct snd_seq_device **result); + +#define SNDRV_SEQ_DEVICE_ARGPTR(dev) ((void *)(dev)->args) + +int __must_check __snd_seq_driver_register(struct snd_seq_driver *drv, + struct module *mod); +#define snd_seq_driver_register(drv) \ + __snd_seq_driver_register(drv, THIS_MODULE) +void snd_seq_driver_unregister(struct snd_seq_driver *drv); + +#define module_snd_seq_driver(drv) \ + module_driver(drv, snd_seq_driver_register, snd_seq_driver_unregister) + +/* + * id strings for generic devices + */ +#define SNDRV_SEQ_DEV_ID_MIDISYNTH "seq-midi" +#define SNDRV_SEQ_DEV_ID_OPL3 "opl3-synth" +#define SNDRV_SEQ_DEV_ID_UMP "seq-ump-client" + +#endif /* __SOUND_SEQ_DEVICE_H */ -- cgit v1.3.1