From 22098763a10d9c1340827fcf6edab66f153b27f0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Sep 2026 12:27:00 -0700 Subject: Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Don't destroy user event fields when removal fails User event fields are destroyed before the event is removed from visibility. But that can fail leaving the still visible event with no fields. Move the destroying of the fields to after the event is successfully removed from visibility. - Initialize function graph state is fork before calling copy_exec_state() For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state. If that allocation fails, ftrace_graph_exit_task() will free the tasks ret_stack pointer. Since that pointer is still using the parent's ret_stack, it mistakenly frees the parent's pointer too. Call ftrace_graph_init() on the task first which will NULL out the new tasks's ret_stack and if the copy fails, it will not free anything. - Remove FGRAPH_MAX_INDEX The macro FGRAPH_MAX_INDEX was added but never used. Remove it. - Save ent_size in function graph printing of nested functions The function graph tracer needs to look at the next event to see if the next event is the return of the current function entry. If it is, it prints a single line: ktime_get(); Otherwise it prints it like a nested function: tick_nohz_irq_exit() { ktime_get(); kcpustat_irq_exit(); } In order to look at the next event, it must save the current event so that it has the information to print from it. It saves the event in the iterator descriptor called "ent". What it doesn't save is the ent_size of the event which is now used to know if the function graph arguments are to be printed. The peek doesn't save the size so the size used happens to be that of the size of the last event that was seen. Save the entry event size in the iterator descriptor so that the correct size is used. - Fix several errors with freeing data in the histogram code The histogram code had a lot of leaked or or incorrect accounting when failures happen. Correct them. - Fix histogram regression of .percent and .graph modifiers Up until 6.3 histogram values could have "percent" or "graph" modifiers that changed how they were printed. But a change that added restricting histograms values from being strings, stack traces and other modifiers inadvertently prevented them from using the percent and graph modifiers, which were legal use cases for values. Put back the percent and graph modifiers. - Fix various typos in the comments - Set the trace_clock before initializing a histogram with clock argument The histogram API allows the user to specific which trace clock to use via a "clock=" string. The histogram is set up first before the clock is checked. If the passed in clock is not valid, it exits without fully fixing up the histogram leaving it on the list and a use-after-free can trigger. Update the clock argument first and if it fails then exit gracefully before the histogram trigger is placed on any lists. - Restore :mod: trailer after parsing in ftrace_set_clr_event The function ftrace_set_clr_event() modifies the parse string and needs to put it back to what was passed in. It searches for ":mod:" via a strsep() but fails to put back the first ':' in the string. Add back the ':' in the passed in string. - Take trace_array reference when opening a tracer options file The options files are dynamically created and some tracers add their own options. When a tracer adds their own list of options, the trace_array holding them has an array to hold the list of options for each tracer. This array increases in size via a krealloc(), and the new entry gets a newly allocated array to hold the options of the new tracer being added. The element in each entry of the tracer's option array holds a pointer back to the trace_array, a pointer to the tracer it is associated to, a pointer to the flags of the option. The issue is that these arrays are freed when the trace_array is freed when its instance it represents is removed from the instances directory. There's a race that an open of one of these options files can happen when the instance is being removed. Add a new helper function to be called by the open function of the options file to iterate all existing trace_arrays under a lock and find the one that has the given option element in one of it's tracer arrays. If found, then update the associated trace_array's reference counter to keep it from being freed. If not found, have the open call return -ENODEV. - Disable interrupts when acquiring the lock in rb_wake_up_waiters() The function rb_wake_up_waiters() assumes it will be called in interrupt context and does not disable irqs when taking cpu_buffer->reader_lock, which can be called in hard interrupt context. The issue is in PREEMPT_RT, this function is called in thread context leaving this lock open to a deadlock. Take the lock with interrupts disabled. - Use rcu_assign_pointer() for tmp_ops filter hash The tmp_ops used in update_ftrace_direct_mod() assigns its filter_hash field directly, but that field is annotated as __rcu and sparse complains. Assign it with rcu_assign_pointer() - Fix use-after-free in enable_trigger_private_data_free() The trace_event_call is accessed through the event_trigger_data's trace_event_file pointer to put the trace_event_call on freeing. The issue is that the trace_event_file data may have been freed already causing a use-after-free. Add a field to the event_trigger_data that points directly to the trace_event_call so that it can decrement its reference directly without needing to go through the trace_event_file. - Fix accounting of buffer data remote headers trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount the number of pages is needed for the asked for size as it doesn't take into account the meta data on each page. Add a helper function to do the calculation properly and use that in these functions. - Catch nr_page_va overflow in ring_buffer_desc sizing The number of pages per remote ring buffer is capped by ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to overflow that field would silently allocate a descriptor smaller than what was asked for. - Do not resize the subbuf order if any per_cpu buffer is disabled The mmapping of ring buffers disables resizing the subbuffers, but it is done per-cpu whereas the subbuf size change is done for all the per_cpu buffers under the buffer->mutex. It could change the size of some while the mapping is happening on others. Have the resize of the subbuf order check all the per_cpu buffers under the lock to see if any of them is disabled before starting and causing an inconsistency between buffers that are being mapped. * tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits) ring-buffer: Check resize_disabled before publishing the new subbuf order tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing tracing/remotes: Account for ring buffer page header in size calculation tracing: Don't dereference trace_event_file in deferred trigger free ftrace: Use rcu_assign_pointer() for tmp_ops filter hash ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters() tracing: Take trace_array reference when opening a tracer options file tracing: Fix ring_buffer_read_page_size() kernel-doc tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event() tracing: Fix memory corruption from a "STACKTRACE" histogram key tracing: Fix memory corruption from the histogram stacktrace modifier tracing: Undo the registration when enabling the histogram trigger fails tracing: Take the reference before publishing the named histogram trigger tracing: Set the trace clock before registering the histogram trigger tracing: Fix typo "preceeded" in comment tracing: Fix typo "availabe" in comment tracing: Let histogram values keep the percent and graph modifiers tracing: Keep the entry count when the histogram stats allocation fails tracing: Free histogram the field rejected for a bad modifier tracing: Free histogram the var ref when its initialization fails ... --- include/net/mac802154.h | 489 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 489 insertions(+) create mode 100644 include/net/mac802154.h (limited to 'include/net/mac802154.h') diff --git a/include/net/mac802154.h b/include/net/mac802154.h new file mode 100644 index 000000000..d72006a85 --- /dev/null +++ b/include/net/mac802154.h @@ -0,0 +1,489 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * IEEE802.15.4-2003 specification + * + * Copyright (C) 2007-2012 Siemens AG + */ +#ifndef NET_MAC802154_H +#define NET_MAC802154_H + +#include +#include +#include +#include + +#include + +/** + * enum ieee802154_hw_addr_filt_flags - hardware address filtering flags + * + * The following flags are used to indicate changed address settings from + * the stack to the hardware. + * + * @IEEE802154_AFILT_SADDR_CHANGED: Indicates that the short address will be + * change. + * + * @IEEE802154_AFILT_IEEEADDR_CHANGED: Indicates that the extended address + * will be change. + * + * @IEEE802154_AFILT_PANID_CHANGED: Indicates that the pan id will be change. + * + * @IEEE802154_AFILT_PANC_CHANGED: Indicates that the address filter will + * do frame address filtering as a pan coordinator. + */ +enum ieee802154_hw_addr_filt_flags { + IEEE802154_AFILT_SADDR_CHANGED = BIT(0), + IEEE802154_AFILT_IEEEADDR_CHANGED = BIT(1), + IEEE802154_AFILT_PANID_CHANGED = BIT(2), + IEEE802154_AFILT_PANC_CHANGED = BIT(3), +}; + +/** + * struct ieee802154_hw_addr_filt - hardware address filtering settings + * + * @pan_id: pan_id which should be set to the hardware address filter. + * + * @short_addr: short_addr which should be set to the hardware address filter. + * + * @ieee_addr: extended address which should be set to the hardware address + * filter. + * + * @pan_coord: boolean if hardware filtering should be operate as coordinator. + */ +struct ieee802154_hw_addr_filt { + __le16 pan_id; + __le16 short_addr; + __le64 ieee_addr; + bool pan_coord; +}; + +/** + * struct ieee802154_hw - ieee802154 hardware + * + * @extra_tx_headroom: headroom to reserve in each transmit skb for use by the + * driver (e.g. for transmit headers.) + * + * @flags: hardware flags, see &enum ieee802154_hw_flags + * + * @parent: parent device of the hardware. + * + * @priv: pointer to private area that was allocated for driver use along with + * this structure. + * + * @phy: This points to the &struct wpan_phy allocated for this 802.15.4 PHY. + */ +struct ieee802154_hw { + /* filled by the driver */ + int extra_tx_headroom; + u32 flags; + struct device *parent; + void *priv; + + /* filled by mac802154 core */ + struct wpan_phy *phy; +}; + +/** + * enum ieee802154_hw_flags - hardware flags + * + * These flags are used to indicate hardware capabilities to + * the stack. Generally, flags here should have their meaning + * done in a way that the simplest hardware doesn't need setting + * any particular flags. There are some exceptions to this rule, + * however, so you are advised to review these flags carefully. + * + * @IEEE802154_HW_TX_OMIT_CKSUM: Indicates that xmitter will add FCS on it's + * own. + * + * @IEEE802154_HW_LBT: Indicates that transceiver will support listen before + * transmit. + * + * @IEEE802154_HW_CSMA_PARAMS: Indicates that transceiver will support csma + * parameters (max_be, min_be, backoff exponents). + * + * @IEEE802154_HW_FRAME_RETRIES: Indicates that transceiver will support ARET + * frame retries setting. + * + * @IEEE802154_HW_AFILT: Indicates that transceiver will support hardware + * address filter setting. + * + * @IEEE802154_HW_PROMISCUOUS: Indicates that transceiver will support + * promiscuous mode setting. + * + * @IEEE802154_HW_RX_OMIT_CKSUM: Indicates that receiver omits FCS. + */ +enum ieee802154_hw_flags { + IEEE802154_HW_TX_OMIT_CKSUM = BIT(0), + IEEE802154_HW_LBT = BIT(1), + IEEE802154_HW_CSMA_PARAMS = BIT(2), + IEEE802154_HW_FRAME_RETRIES = BIT(3), + IEEE802154_HW_AFILT = BIT(4), + IEEE802154_HW_PROMISCUOUS = BIT(5), + IEEE802154_HW_RX_OMIT_CKSUM = BIT(6), +}; + +/* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */ +#define IEEE802154_HW_OMIT_CKSUM (IEEE802154_HW_TX_OMIT_CKSUM | \ + IEEE802154_HW_RX_OMIT_CKSUM) + +/* struct ieee802154_ops - callbacks from mac802154 to the driver + * + * This structure contains various callbacks that the driver may + * handle or, in some cases, must handle, for example to transmit + * a frame. + * + * start: Handler that 802.15.4 module calls for device initialization. + * This function is called before the first interface is attached. + * + * stop: Handler that 802.15.4 module calls for device cleanup. + * This function is called after the last interface is removed. + * + * xmit_sync: + * Handler that 802.15.4 module calls for each transmitted frame. + * skb contains the buffer starting from the IEEE 802.15.4 header. + * The low-level driver should send the frame based on available + * configuration. This is called by a workqueue and useful for + * synchronous 802.15.4 drivers. + * This function should return zero or negative errno. + * + * WARNING: + * This will be deprecated soon. We don't accept synced xmit callbacks + * drivers anymore. + * + * xmit_async: + * Handler that 802.15.4 module calls for each transmitted frame. + * skb contains the buffer starting from the IEEE 802.15.4 header. + * The low-level driver should send the frame based on available + * configuration. + * This function should return zero or negative errno. + * + * ed: Handler that 802.15.4 module calls for Energy Detection. + * This function should place the value for detected energy + * (usually device-dependant) in the level pointer and return + * either zero or negative errno. Called with pib_lock held. + * + * set_channel: + * Set radio for listening on specific channel. + * Set the device for listening on specified channel. + * Returns either zero, or negative errno. Called with pib_lock held. + * + * set_hw_addr_filt: + * Set radio for listening on specific address. + * Set the device for listening on specified address. + * Returns either zero, or negative errno. + * + * set_txpower: + * Set radio transmit power in mBm. Called with pib_lock held. + * Returns either zero, or negative errno. + * + * set_lbt + * Enables or disables listen before talk on the device. Called with + * pib_lock held. + * Returns either zero, or negative errno. + * + * set_cca_mode + * Sets the CCA mode used by the device. Called with pib_lock held. + * Returns either zero, or negative errno. + * + * set_cca_ed_level + * Sets the CCA energy detection threshold in mBm. Called with pib_lock + * held. + * Returns either zero, or negative errno. + * + * set_csma_params + * Sets the CSMA parameter set for the PHY. Called with pib_lock held. + * Returns either zero, or negative errno. + * + * set_frame_retries + * Sets the retransmission attempt limit. Called with pib_lock held. + * Returns either zero, or negative errno. + * + * set_promiscuous_mode + * Enables or disable promiscuous mode. + */ +struct ieee802154_ops { + struct module *owner; + int (*start)(struct ieee802154_hw *hw); + void (*stop)(struct ieee802154_hw *hw); + int (*xmit_sync)(struct ieee802154_hw *hw, + struct sk_buff *skb); + int (*xmit_async)(struct ieee802154_hw *hw, + struct sk_buff *skb); + int (*ed)(struct ieee802154_hw *hw, u8 *level); + int (*set_channel)(struct ieee802154_hw *hw, u8 page, + u8 channel); + int (*set_hw_addr_filt)(struct ieee802154_hw *hw, + struct ieee802154_hw_addr_filt *filt, + unsigned long changed); + int (*set_txpower)(struct ieee802154_hw *hw, s32 mbm); + int (*set_lbt)(struct ieee802154_hw *hw, bool on); + int (*set_cca_mode)(struct ieee802154_hw *hw, + const struct wpan_phy_cca *cca); + int (*set_cca_ed_level)(struct ieee802154_hw *hw, s32 mbm); + int (*set_csma_params)(struct ieee802154_hw *hw, + u8 min_be, u8 max_be, u8 retries); + int (*set_frame_retries)(struct ieee802154_hw *hw, + s8 retries); + int (*set_promiscuous_mode)(struct ieee802154_hw *hw, + const bool on); +}; + +/** + * ieee802154_get_fc_from_skb - get the frame control field from an skb + * @skb: skb where the frame control field will be get from + */ +static inline __le16 ieee802154_get_fc_from_skb(const struct sk_buff *skb) +{ + __le16 fc; + + /* check if we can fc at skb_mac_header of sk buffer */ + if (WARN_ON(!skb_mac_header_was_set(skb) || + (skb_tail_pointer(skb) - + skb_mac_header(skb)) < IEEE802154_FC_LEN)) + return cpu_to_le16(0); + + memcpy(&fc, skb_mac_header(skb), IEEE802154_FC_LEN); + return fc; +} + +/** + * ieee802154_skb_dst_pan - get the pointer to destination pan field + * @fc: mac header frame control field + * @skb: skb where the destination pan pointer will be get from + */ +static inline unsigned char *ieee802154_skb_dst_pan(__le16 fc, + const struct sk_buff *skb) +{ + unsigned char *dst_pan; + + switch (ieee802154_daddr_mode(fc)) { + case cpu_to_le16(IEEE802154_FCTL_ADDR_NONE): + dst_pan = NULL; + break; + case cpu_to_le16(IEEE802154_FCTL_DADDR_SHORT): + case cpu_to_le16(IEEE802154_FCTL_DADDR_EXTENDED): + dst_pan = skb_mac_header(skb) + + IEEE802154_FC_LEN + + IEEE802154_SEQ_LEN; + break; + default: + WARN_ONCE(1, "invalid addr mode detected"); + dst_pan = NULL; + break; + } + + return dst_pan; +} + +/** + * ieee802154_skb_src_pan - get the pointer to source pan field + * @fc: mac header frame control field + * @skb: skb where the source pan pointer will be get from + */ +static inline unsigned char *ieee802154_skb_src_pan(__le16 fc, + const struct sk_buff *skb) +{ + unsigned char *src_pan; + + switch (ieee802154_saddr_mode(fc)) { + case cpu_to_le16(IEEE802154_FCTL_ADDR_NONE): + src_pan = NULL; + break; + case cpu_to_le16(IEEE802154_FCTL_SADDR_SHORT): + case cpu_to_le16(IEEE802154_FCTL_SADDR_EXTENDED): + /* if intra-pan and source addr mode is non none, + * then source pan id is equal destination pan id. + */ + if (ieee802154_is_intra_pan(fc)) { + src_pan = ieee802154_skb_dst_pan(fc, skb); + break; + } + + switch (ieee802154_daddr_mode(fc)) { + case cpu_to_le16(IEEE802154_FCTL_ADDR_NONE): + src_pan = skb_mac_header(skb) + + IEEE802154_FC_LEN + + IEEE802154_SEQ_LEN; + break; + case cpu_to_le16(IEEE802154_FCTL_DADDR_SHORT): + src_pan = skb_mac_header(skb) + + IEEE802154_FC_LEN + + IEEE802154_SEQ_LEN + + IEEE802154_PAN_ID_LEN + + IEEE802154_SHORT_ADDR_LEN; + break; + case cpu_to_le16(IEEE802154_FCTL_DADDR_EXTENDED): + src_pan = skb_mac_header(skb) + + IEEE802154_FC_LEN + + IEEE802154_SEQ_LEN + + IEEE802154_PAN_ID_LEN + + IEEE802154_EXTENDED_ADDR_LEN; + break; + default: + WARN_ONCE(1, "invalid addr mode detected"); + src_pan = NULL; + break; + } + break; + default: + WARN_ONCE(1, "invalid addr mode detected"); + src_pan = NULL; + break; + } + + return src_pan; +} + +/** + * ieee802154_skb_is_intra_pan_addressing - checks whenever the mac addressing + * is an intra pan communication + * @fc: mac header frame control field + * @skb: skb where the source and destination pan should be get from + */ +static inline bool ieee802154_skb_is_intra_pan_addressing(__le16 fc, + const struct sk_buff *skb) +{ + unsigned char *dst_pan = ieee802154_skb_dst_pan(fc, skb), + *src_pan = ieee802154_skb_src_pan(fc, skb); + + /* if one is NULL is no intra pan addressing */ + if (!dst_pan || !src_pan) + return false; + + return !memcmp(dst_pan, src_pan, IEEE802154_PAN_ID_LEN); +} + +/** + * ieee802154_be64_to_le64 - copies and convert be64 to le64 + * @le64_dst: le64 destination pointer + * @be64_src: be64 source pointer + */ +static inline void ieee802154_be64_to_le64(void *le64_dst, const void *be64_src) +{ + put_unaligned_le64(get_unaligned_be64(be64_src), le64_dst); +} + +/** + * ieee802154_le64_to_be64 - copies and convert le64 to be64 + * @be64_dst: be64 destination pointer + * @le64_src: le64 source pointer + */ +static inline void ieee802154_le64_to_be64(void *be64_dst, const void *le64_src) +{ + put_unaligned_be64(get_unaligned_le64(le64_src), be64_dst); +} + +/** + * ieee802154_le16_to_be16 - copies and convert le16 to be16 + * @be16_dst: be16 destination pointer + * @le16_src: le16 source pointer + */ +static inline void ieee802154_le16_to_be16(void *be16_dst, const void *le16_src) +{ + put_unaligned_be16(get_unaligned_le16(le16_src), be16_dst); +} + +/** + * ieee802154_be16_to_le16 - copies and convert be16 to le16 + * @le16_dst: le16 destination pointer + * @be16_src: be16 source pointer + */ +static inline void ieee802154_be16_to_le16(void *le16_dst, const void *be16_src) +{ + put_unaligned_le16(get_unaligned_be16(be16_src), le16_dst); +} + +/** + * ieee802154_alloc_hw - Allocate a new hardware device + * + * This must be called once for each hardware device. The returned pointer + * must be used to refer to this device when calling other functions. + * mac802154 allocates a private data area for the driver pointed to by + * @priv in &struct ieee802154_hw, the size of this area is given as + * @priv_data_len. + * + * @priv_data_len: length of private data + * @ops: callbacks for this device + * + * Return: A pointer to the new hardware device, or %NULL on error. + */ +struct ieee802154_hw * +ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops); + +/** + * ieee802154_free_hw - free hardware descriptor + * + * This function frees everything that was allocated, including the + * private data for the driver. You must call ieee802154_unregister_hw() + * before calling this function. + * + * @hw: the hardware to free + */ +void ieee802154_free_hw(struct ieee802154_hw *hw); + +/** + * ieee802154_register_hw - Register hardware device + * + * You must call this function before any other functions in + * mac802154. Note that before a hardware can be registered, you + * need to fill the contained wpan_phy's information. + * + * @hw: the device to register as returned by ieee802154_alloc_hw() + * + * Return: 0 on success. An error code otherwise. + */ +int ieee802154_register_hw(struct ieee802154_hw *hw); + +/** + * ieee802154_unregister_hw - Unregister a hardware device + * + * This function instructs mac802154 to free allocated resources + * and unregister netdevices from the networking subsystem. + * + * @hw: the hardware to unregister + */ +void ieee802154_unregister_hw(struct ieee802154_hw *hw); + +/** + * ieee802154_rx_irqsafe - receive frame + * + * Like ieee802154_rx() but can be called in IRQ context + * (internally defers to a tasklet.) + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac802154 after this call + * @lqi: link quality indicator + */ +void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, + u8 lqi); + +/** + * ieee802154_xmit_complete - frame transmission complete + * + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * @skb: buffer for transmission + * @ifs_handling: indicate interframe space handling + */ +void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb, + bool ifs_handling); + +/** + * ieee802154_xmit_error - offloaded frame transmission failed + * + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * @skb: buffer for transmission + * @reason: error code + */ +void ieee802154_xmit_error(struct ieee802154_hw *hw, struct sk_buff *skb, + int reason); + +/** + * ieee802154_xmit_hw_error - frame could not be offloaded to the transmitter + * because of a hardware error (bus error, timeout, etc) + * + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * @skb: buffer for transmission + */ +void ieee802154_xmit_hw_error(struct ieee802154_hw *hw, struct sk_buff *skb); + +#endif /* NET_MAC802154_H */ -- cgit v1.3.1