From 2bc6b218717b9d08f466f88209251d54bc09b207 Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Tue, 22 Sep 2026 19:14:30 +0100 Subject: arm64/boot: Disable trapping of PMZR_EL0 writes to EL2 __init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2. PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a write from EL0 reaches the trap and takes the host down without a panic message. Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9 bits. Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9") Cc: stable@vger.kernel.org Signed-off-by: Fuad Tabba Reviewed-by: Anshuman Khandual Reviewed-by: Oliver Upton Signed-off-by: Will Deacon --- include/clocksource/timer-davinci.h | 44 +++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 include/clocksource/timer-davinci.h (limited to 'include/clocksource/timer-davinci.h') diff --git a/include/clocksource/timer-davinci.h b/include/clocksource/timer-davinci.h new file mode 100644 index 000000000..1dcc1333f --- /dev/null +++ b/include/clocksource/timer-davinci.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * TI DaVinci clocksource driver + * + * Copyright (C) 2019 Texas Instruments + * Author: Bartosz Golaszewski + */ + +#ifndef __TIMER_DAVINCI_H__ +#define __TIMER_DAVINCI_H__ + +#include +#include + +enum { + DAVINCI_TIMER_CLOCKEVENT_IRQ, + DAVINCI_TIMER_CLOCKSOURCE_IRQ, + DAVINCI_TIMER_NUM_IRQS, +}; + +/** + * struct davinci_timer_cfg - davinci clocksource driver configuration struct + * @reg: register range resource + * @irq: clockevent and clocksource interrupt resources + * @cmp_off: if set - it specifies the compare register used for clockevent + * + * Note: if the compare register is specified, the driver will use the bottom + * clock half for both clocksource and clockevent and the compare register + * to generate event irqs. The user must supply the correct compare register + * interrupt number. + * + * This is only used by da830 the DSP of which uses the top half. The timer + * driver still configures the top half to run in free-run mode. + */ +struct davinci_timer_cfg { + struct resource reg; + struct resource irq[DAVINCI_TIMER_NUM_IRQS]; + unsigned int cmp_off; +}; + +int __init davinci_timer_register(struct clk *clk, + const struct davinci_timer_cfg *data); + +#endif /* __TIMER_DAVINCI_H__ */ -- cgit v1.3.1