From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- fs/ocfs2/suballoc.h | 226 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 226 insertions(+) create mode 100644 fs/ocfs2/suballoc.h (limited to 'fs/ocfs2/suballoc.h') diff --git a/fs/ocfs2/suballoc.h b/fs/ocfs2/suballoc.h new file mode 100644 index 000000000..bcf2ed4a8 --- /dev/null +++ b/fs/ocfs2/suballoc.h @@ -0,0 +1,226 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * suballoc.h + * + * Defines sub allocator api + * + * Copyright (C) 2003, 2004 Oracle. All rights reserved. + */ + +#ifndef _CHAINALLOC_H_ +#define _CHAINALLOC_H_ + +struct ocfs2_suballoc_result; +typedef int (group_search_t)(struct inode *, + struct buffer_head *, + u32, /* bits_wanted */ + u32, /* min_bits */ + u64, /* max_block */ + struct ocfs2_suballoc_result *); + /* found bits */ + +struct ocfs2_alloc_context { + struct inode *ac_inode; /* which bitmap are we allocating from? */ + struct buffer_head *ac_bh; /* file entry bh */ + u32 ac_alloc_slot; /* which slot are we allocating from? */ + u32 ac_bits_wanted; + u32 ac_bits_given; +#define OCFS2_AC_USE_LOCAL 1 +#define OCFS2_AC_USE_MAIN 2 +#define OCFS2_AC_USE_INODE 3 +#define OCFS2_AC_USE_META 4 +#define OCFS2_AC_USE_MAIN_DISCONTIG 5 + u32 ac_which; + + /* these are used by the chain search */ + u16 ac_chain; + int ac_disable_chain_relink; + group_search_t *ac_group_search; + + u64 ac_last_group; + u64 ac_max_block; /* Highest block number to allocate. 0 is + the same as ~0 - unlimited */ + + int ac_find_loc_only; /* hack for reflink operation ordering */ + struct ocfs2_suballoc_result *ac_find_loc_priv; /* */ + + struct ocfs2_alloc_reservation *ac_resv; +}; + +void ocfs2_init_steal_slots(struct ocfs2_super *osb); +void ocfs2_free_alloc_context(struct ocfs2_alloc_context *ac); +static inline int ocfs2_alloc_context_bits_left(struct ocfs2_alloc_context *ac) +{ + return ac->ac_bits_wanted - ac->ac_bits_given; +} + +/* + * Please note that the caller must make sure that root_el is the root + * of extent tree. So for an inode, it should be &fe->id2.i_list. Otherwise + * the result may be wrong. + */ +int ocfs2_reserve_new_metadata(struct ocfs2_super *osb, + struct ocfs2_extent_list *root_el, + struct ocfs2_alloc_context **ac); +int ocfs2_reserve_new_metadata_blocks(struct ocfs2_super *osb, + int blocks, + struct ocfs2_alloc_context **ac); +int ocfs2_reserve_new_inode(struct ocfs2_super *osb, + struct ocfs2_alloc_context **ac); +int ocfs2_reserve_clusters(struct ocfs2_super *osb, + u32 bits_wanted, + struct ocfs2_alloc_context **ac); + +int ocfs2_alloc_dinode_update_counts(struct inode *inode, + handle_t *handle, + struct buffer_head *di_bh, + u32 num_bits, + u16 chain); +void ocfs2_rollback_alloc_dinode_counts(struct inode *inode, + struct buffer_head *di_bh, + u32 num_bits, + u16 chain); +u16 ocfs2_find_max_contig_free_bits(void *bitmap, + u16 total_bits, u16 start); +int ocfs2_block_group_set_bits(handle_t *handle, + struct inode *alloc_inode, + struct ocfs2_group_desc *bg, + struct buffer_head *group_bh, + unsigned int bit_off, + unsigned int num_bits, + unsigned int max_contig_bits, + int fastpath); + +int ocfs2_claim_metadata(handle_t *handle, + struct ocfs2_alloc_context *ac, + u32 bits_wanted, + u64 *suballoc_loc, + u16 *suballoc_bit_start, + u32 *num_bits, + u64 *blkno_start); +int ocfs2_claim_new_inode(handle_t *handle, + struct inode *dir, + struct buffer_head *parent_fe_bh, + struct ocfs2_alloc_context *ac, + u64 *suballoc_loc, + u16 *suballoc_bit, + u64 *fe_blkno); +int ocfs2_claim_clusters(handle_t *handle, + struct ocfs2_alloc_context *ac, + u32 min_clusters, + u32 *cluster_start, + u32 *num_clusters); +/* + * Use this variant of ocfs2_claim_clusters to specify a maximum + * number of clusters smaller than the allocation reserved. + */ +int __ocfs2_claim_clusters(handle_t *handle, + struct ocfs2_alloc_context *ac, + u32 min_clusters, + u32 max_clusters, + u32 *cluster_start, + u32 *num_clusters); + +int ocfs2_free_suballoc_bits(handle_t *handle, + struct inode *alloc_inode, + struct buffer_head *alloc_bh, + unsigned int start_bit, + u64 bg_blkno, + unsigned int count); +int ocfs2_free_dinode(handle_t *handle, + struct inode *inode_alloc_inode, + struct buffer_head *inode_alloc_bh, + struct ocfs2_dinode *di); +int ocfs2_free_clusters(handle_t *handle, + struct inode *bitmap_inode, + struct buffer_head *bitmap_bh, + u64 start_blk, + unsigned int num_clusters); +int ocfs2_release_clusters(handle_t *handle, + struct inode *bitmap_inode, + struct buffer_head *bitmap_bh, + u64 start_blk, + unsigned int num_clusters); + +static inline u64 ocfs2_which_suballoc_group(u64 block, unsigned int bit) +{ + u64 group = block - (u64) bit; + + return group; +} + +static inline u32 ocfs2_cluster_from_desc(struct ocfs2_super *osb, + u64 bg_blkno) +{ + /* This should work for all block group descriptors as only + * the 1st group descriptor of the cluster bitmap is + * different. */ + + if (bg_blkno == osb->first_cluster_group_blkno) + return 0; + + /* the rest of the block groups are located at the beginning + * of their 1st cluster, so a direct translation just + * works. */ + return ocfs2_blocks_to_clusters(osb->sb, bg_blkno); +} + +static inline int ocfs2_is_cluster_bitmap(struct inode *inode) +{ + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + return osb->bitmap_blkno == OCFS2_I(inode)->ip_blkno; +} + +/* This is for local alloc ONLY. Others should use the task-specific + * apis above. */ +int ocfs2_reserve_cluster_bitmap_bits(struct ocfs2_super *osb, + struct ocfs2_alloc_context *ac); +void ocfs2_free_ac_resource(struct ocfs2_alloc_context *ac); + +/* given a cluster offset, calculate which block group it belongs to + * and return that block offset. */ +u64 ocfs2_which_cluster_group(struct inode *inode, u32 cluster); + +/* + * By default, ocfs2_read_group_descriptor() calls ocfs2_error() when it + * finds a problem. A caller that wants to check a group descriptor + * without going readonly should read the block with ocfs2_read_block[s]() + * and then checking it with this function. This is only resize, really. + * Everyone else should be using ocfs2_read_group_descriptor(). + */ +int ocfs2_check_group_descriptor(struct super_block *sb, + struct ocfs2_dinode *di, + struct buffer_head *bh); +/* + * Read a group descriptor block into *bh. If *bh is NULL, a bh will be + * allocated. This is a cached read. The descriptor will be validated with + * ocfs2_validate_group_descriptor(). + */ +int ocfs2_read_group_descriptor(struct inode *inode, struct ocfs2_dinode *di, + u64 gd_blkno, struct buffer_head **bh); + +int ocfs2_lock_allocators(struct inode *inode, struct ocfs2_extent_tree *et, + u32 clusters_to_add, u32 extents_to_split, + struct ocfs2_alloc_context **data_ac, + struct ocfs2_alloc_context **meta_ac); + +int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res); + + + +/* + * The following two interfaces are for ocfs2_create_inode_in_orphan(). + */ +int ocfs2_find_new_inode_loc(struct inode *dir, + struct buffer_head *parent_fe_bh, + struct ocfs2_alloc_context *ac, + u64 *fe_blkno); + +int ocfs2_claim_new_inode_at_loc(handle_t *handle, + struct inode *dir, + struct ocfs2_alloc_context *ac, + u64 *suballoc_loc, + u16 *suballoc_bit, + u64 di_blkno); + +#endif /* _CHAINALLOC_H_ */ -- cgit v1.3.1