From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 24 Aug 2026 08:46:03 -0700
Subject: Merge tag 'pinctrl-v7.3-1' of
 git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...
---
 drivers/video/fbdev/tdfxfb.c | 1827 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 1827 insertions(+)
 create mode 100644 drivers/video/fbdev/tdfxfb.c

(limited to 'drivers/video/fbdev/tdfxfb.c')

diff --git a/drivers/video/fbdev/tdfxfb.c b/drivers/video/fbdev/tdfxfb.c
new file mode 100644
index 000000000..281987502
--- /dev/null
+++ b/drivers/video/fbdev/tdfxfb.c
@@ -0,0 +1,1827 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * tdfxfb.c
+ *
+ * Author: Hannu Mallat <hmallat@cc.hut.fi>
+ *
+ * Copyright © 1999 Hannu Mallat
+ * All rights reserved
+ *
+ * Created      : Thu Sep 23 18:17:43 1999, hmallat
+ * Last modified: Tue Nov  2 21:19:47 1999, hmallat
+ *
+ * I2C part copied from the i2c-voodoo3.c driver by:
+ * Frodo Looijaard <frodol@dds.nl>,
+ * Philip Edelbrock <phil@netroedge.com>,
+ * Ralph Metzler <rjkm@thp.uni-koeln.de>, and
+ * Mark D. Studebaker <mdsxyz123@yahoo.com>
+ *
+ * Lots of the information here comes from the Daryll Strauss' Banshee
+ * patches to the XF86 server, and the rest comes from the 3dfx
+ * Banshee specification. I'm very much indebted to Daryll for his
+ * work on the X server.
+ *
+ * Voodoo3 support was contributed Harold Oga. Lots of additions
+ * (proper acceleration, 24 bpp, hardware cursor) and bug fixes by Attila
+ * Kesmarki. Thanks guys!
+ *
+ * Voodoo1 and Voodoo2 support aren't relevant to this driver as they
+ * behave very differently from the Voodoo3/4/5. For anyone wanting to
+ * use frame buffer on the Voodoo1/2, see the sstfb driver (which is
+ * located at http://www.sourceforge.net/projects/sstfb).
+ *
+ * While I _am_ grateful to 3Dfx for releasing the specs for Banshee,
+ * I do wish the next version is a bit more complete. Without the XF86
+ * patches I couldn't have gotten even this far... for instance, the
+ * extensions to the VGA register set go completely unmentioned in the
+ * spec! Also, lots of references are made to the 'SST core', but no
+ * spec is publicly available, AFAIK.
+ *
+ * The structure of this driver comes pretty much from the Permedia
+ * driver by Ilario Nardinocchi, which in turn is based on skeletonfb.
+ *
+ * TODO:
+ * - multihead support (basically need to support an array of fb_infos)
+ * - support other architectures (PPC, Alpha); does the fact that the VGA
+ *   core can be accessed only thru I/O (not memory mapped) complicate
+ *   things?
+ *
+ * Version history:
+ *
+ * 0.1.4 (released 2002-05-28)	ported over to new fbdev api by James Simmons
+ *
+ * 0.1.3 (released 1999-11-02)	added Attila's panning support, code
+ *				reorg, hwcursor address page size alignment
+ *				(for mmapping both frame buffer and regs),
+ *				and my changes to get rid of hardcoded
+ *				VGA i/o register locations (uses PCI
+ *				configuration info now)
+ * 0.1.2 (released 1999-10-19)	added Attila Kesmarki's bug fixes and
+ *				improvements
+ * 0.1.1 (released 1999-10-07)	added Voodoo3 support by Harold Oga.
+ * 0.1.0 (released 1999-10-06)	initial version
+ *
+ */
+
+#include <linux/aperture.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#include <video/tdfx.h>
+#include <video/vga.h>
+
+#define DPRINTK(a, b...) pr_debug("fb: %s: " a, __func__ , ## b)
+
+#define BANSHEE_MAX_PIXCLOCK 270000
+#define VOODOO3_MAX_PIXCLOCK 300000
+#define VOODOO5_MAX_PIXCLOCK 350000
+
+static const struct fb_fix_screeninfo tdfx_fix = {
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_PSEUDOCOLOR,
+	.ypanstep =	1,
+	.ywrapstep =	1,
+	.accel =	FB_ACCEL_3DFX_BANSHEE
+};
+
+static const struct fb_var_screeninfo tdfx_var = {
+	/* "640x480, 8 bpp @ 60 Hz */
+	.xres =		640,
+	.yres =		480,
+	.xres_virtual =	640,
+	.yres_virtual =	1024,
+	.bits_per_pixel = 8,
+	.red =		{0, 8, 0},
+	.blue =		{0, 8, 0},
+	.green =	{0, 8, 0},
+	.activate =	FB_ACTIVATE_NOW,
+	.height =	-1,
+	.width =	-1,
+	.accel_flags =	FB_ACCELF_TEXT,
+	.pixclock =	39722,
+	.left_margin =	40,
+	.right_margin =	24,
+	.upper_margin =	32,
+	.lower_margin =	11,
+	.hsync_len =	96,
+	.vsync_len =	2,
+	.vmode =	FB_VMODE_NONINTERLACED
+};
+
+/*
+ * PCI driver prototypes
+ */
+static int tdfxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id);
+static void tdfxfb_remove(struct pci_dev *pdev);
+
+static const struct pci_device_id tdfxfb_id_table[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE),
+		.class = PCI_BASE_CLASS_DISPLAY << 16, .class_mask = 0xff0000,
+	}, {
+		PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3),
+		.class = PCI_BASE_CLASS_DISPLAY << 16, .class_mask = 0xff0000,
+	}, {
+		PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO5),
+		.class = PCI_BASE_CLASS_DISPLAY << 16, .class_mask = 0xff0000,
+	},
+	{ }
+};
+
+static struct pci_driver tdfxfb_driver = {
+	.name		= "tdfxfb",
+	.id_table	= tdfxfb_id_table,
+	.probe		= tdfxfb_probe,
+	.remove		= tdfxfb_remove,
+};
+
+MODULE_DEVICE_TABLE(pci, tdfxfb_id_table);
+
+/*
+ * Driver data
+ */
+static int nopan;
+static int nowrap = 1;      /* not implemented (yet) */
+static int hwcursor = 1;
+static char *mode_option;
+static bool nomtrr;
+
+/* -------------------------------------------------------------------------
+ *			Hardware-specific funcions
+ * ------------------------------------------------------------------------- */
+
+static inline u8 vga_inb(struct tdfx_par *par, u32 reg)
+{
+	return inb(par->iobase + reg - 0x300);
+}
+
+static inline void vga_outb(struct tdfx_par *par, u32 reg, u8 val)
+{
+	outb(val, par->iobase + reg - 0x300);
+}
+
+static inline void gra_outb(struct tdfx_par *par, u32 idx, u8 val)
+{
+	vga_outb(par, GRA_I, idx);
+	wmb();
+	vga_outb(par, GRA_D, val);
+	wmb();
+}
+
+static inline void seq_outb(struct tdfx_par *par, u32 idx, u8 val)
+{
+	vga_outb(par, SEQ_I, idx);
+	wmb();
+	vga_outb(par, SEQ_D, val);
+	wmb();
+}
+
+static inline u8 seq_inb(struct tdfx_par *par, u32 idx)
+{
+	vga_outb(par, SEQ_I, idx);
+	mb();
+	return vga_inb(par, SEQ_D);
+}
+
+static inline void crt_outb(struct tdfx_par *par, u32 idx, u8 val)
+{
+	vga_outb(par, CRT_I, idx);
+	wmb();
+	vga_outb(par, CRT_D, val);
+	wmb();
+}
+
+static inline u8 crt_inb(struct tdfx_par *par, u32 idx)
+{
+	vga_outb(par, CRT_I, idx);
+	mb();
+	return vga_inb(par, CRT_D);
+}
+
+static inline void att_outb(struct tdfx_par *par, u32 idx, u8 val)
+{
+	vga_inb(par, IS1_R);
+	vga_outb(par, ATT_IW, idx);
+	vga_outb(par, ATT_IW, val);
+}
+
+static inline void vga_disable_video(struct tdfx_par *par)
+{
+	unsigned char s;
+
+	s = seq_inb(par, 0x01) | 0x20;
+	seq_outb(par, 0x00, 0x01);
+	seq_outb(par, 0x01, s);
+	seq_outb(par, 0x00, 0x03);
+}
+
+static inline void vga_enable_video(struct tdfx_par *par)
+{
+	unsigned char s;
+
+	s = seq_inb(par, 0x01) & 0xdf;
+	seq_outb(par, 0x00, 0x01);
+	seq_outb(par, 0x01, s);
+	seq_outb(par, 0x00, 0x03);
+}
+
+static inline void vga_enable_palette(struct tdfx_par *par)
+{
+	vga_inb(par, IS1_R);
+	mb();
+	vga_outb(par, ATT_IW, 0x20);
+}
+
+static inline u32 tdfx_inl(struct tdfx_par *par, unsigned int reg)
+{
+	return readl(par->regbase_virt + reg);
+}
+
+static inline void tdfx_outl(struct tdfx_par *par, unsigned int reg, u32 val)
+{
+	writel(val, par->regbase_virt + reg);
+}
+
+static inline void banshee_make_room(struct tdfx_par *par, int size)
+{
+	/* Note: The Voodoo3's onboard FIFO has 32 slots. This loop
+	 * won't quit if you ask for more. */
+	while ((tdfx_inl(par, STATUS) & 0x1f) < size - 1)
+		cpu_relax();
+}
+
+static int banshee_wait_idle(struct fb_info *info)
+{
+	struct tdfx_par *par = info->par;
+	int i = 0;
+
+	banshee_make_room(par, 1);
+	tdfx_outl(par, COMMAND_3D, COMMAND_3D_NOP);
+
+	do {
+		if ((tdfx_inl(par, STATUS) & STATUS_BUSY) == 0)
+			i++;
+	} while (i < 3);
+
+	return 0;
+}
+
+/*
+ * Set the color of a palette entry in 8bpp mode
+ */
+static inline void do_setpalentry(struct tdfx_par *par, unsigned regno, u32 c)
+{
+	banshee_make_room(par, 2);
+	tdfx_outl(par, DACADDR, regno);
+	/* read after write makes it working */
+	tdfx_inl(par, DACADDR);
+	tdfx_outl(par, DACDATA, c);
+}
+
+static u32 do_calc_pll(int freq, int *freq_out)
+{
+	int m, n, k, best_m, best_n, best_k, best_error;
+	int fref = 14318;
+
+	best_error = freq;
+	best_n = best_m = best_k = 0;
+
+	for (k = 3; k >= 0; k--) {
+		for (m = 63; m >= 0; m--) {
+			/*
+			 * Estimate value of n that produces target frequency
+			 * with current m and k
+			 */
+			int n_estimated = ((freq * (m + 2) << k) / fref) - 2;
+
+			/* Search neighborhood of estimated n */
+			for (n = max(0, n_estimated);
+				n <= min(255, n_estimated + 1);
+				n++) {
+				/*
+				 * Calculate PLL freqency with current m, k and
+				 * estimated n
+				 */
+				int f = (fref * (n + 2) / (m + 2)) >> k;
+				int error = abs(f - freq);
+
+				/*
+				 * If this is the closest we've come to the
+				 * target frequency then remember n, m and k
+				 */
+				if (error < best_error) {
+					best_error = error;
+					best_n = n;
+					best_m = m;
+					best_k = k;
+				}
+			}
+		}
+	}
+
+	n = best_n;
+	m = best_m;
+	k = best_k;
+	*freq_out = (fref * (n + 2) / (m + 2)) >> k;
+
+	return (n << 8) | (m << 2) | k;
+}
+
+/*
+ * Convert a pllctrl register value back to a frequency in kHz.
+ * Formula from 3dfx documentation.
+ */
+static u32 tdfx_pll_to_khz(u32 pll)
+{
+	return (14318 * (((pll >> 8) & 0xff) + 2) /
+		(((pll >> 2) & 0x3f) + 2)) >> (pll & 3);
+}
+
+/* Layout of the "OEM config" table in voodoo 3 BIOS */
+struct tdfx_bios_cfg {
+	__le32 pciinit0;	/* 0x00 */
+	__le32 miscinit0;	/* 0x04 */
+	__le32 miscinit1;	/* 0x08 */
+	__le32 draminit0;	/* 0x0c */
+	__le32 draminit1;	/* 0x10 */
+	__le32 agpinit0;	/* 0x14 */
+	__le32 pllctrl1;	/* 0x18 - memory PLL */
+	__le32 pllctrl2;	/* 0x1c - graphics PLL */
+	__le32 sgrammode;	/* 0x20 - SGRAM/SDRAM mode register data */
+} __packed;
+
+#define TDFX_ROM_CFG_PTR	0x50
+
+static bool tdfxfb_get_bios_cfg(struct pci_dev *pdev,
+				struct tdfx_bios_cfg *cfg)
+{
+	u16 romcfg, oemcfg;
+	void __iomem *rom;
+	size_t romsize;
+	u8 *image;
+	u32 khz;
+
+	/* This only works for the Voodoo 3 for now */
+	if (pdev->device != PCI_DEVICE_ID_3DFX_VOODOO3)
+		return false;
+
+	rom = pci_map_rom(pdev, &romsize);
+	if (!rom || !romsize)
+		return false;
+
+	image = vmalloc(romsize);
+	if (!image) {
+		pci_unmap_rom(pdev, rom);
+		return false;
+	}
+	memcpy_fromio(image, rom, romsize);
+	pci_unmap_rom(pdev, rom);
+
+	/* ROM[0x50] -> ROM config table -> OEM config table */
+	if (TDFX_ROM_CFG_PTR + 2 > romsize)
+		goto out;
+	romcfg = image[TDFX_ROM_CFG_PTR] | image[TDFX_ROM_CFG_PTR + 1] << 8;
+	if (romcfg == 0xffff || romcfg + 2 > romsize)
+		goto out;
+	oemcfg = image[romcfg] | image[romcfg + 1] << 8;
+	if (oemcfg == 0xffff || oemcfg + sizeof(*cfg) > romsize)
+		goto out;
+	memcpy(cfg, image + oemcfg, sizeof(*cfg));
+	vfree(image);
+
+	/*
+	 * Make sure we didn't read garbage from the BIOS and will
+	 * end up setting a frequency that explodes someone's expensive
+	 * card.
+	 */
+	khz = tdfx_pll_to_khz(le32_to_cpu(cfg->pllctrl1));
+	if (khz < 40000 || khz > 250000 || !le32_to_cpu(cfg->draminit0))
+		return false;
+	return true;
+
+out:
+	vfree(image);
+	return false;
+}
+
+/*
+ * Try to work out if the card was booted or not, just checks if
+ * one of the dram config registers matches what is in the config
+ * table if there is one.
+ *
+ * If we have a BIOS config table attempt to manually boot the
+ * card if needed.
+ */
+static int tdfxfb_hw_init(struct fb_info *info, struct pci_dev *pdev)
+{
+	u32 mempll, gfxpll, draminit0, draminit1, miscinit1, dram_mode;
+	struct tdfx_par *par = info->par;
+	struct tdfx_bios_cfg cfg;
+	bool have_cfg = tdfxfb_get_bios_cfg(pdev, &cfg);
+
+	/*
+	 * Can't tell if the card is booted or not,
+	 * also cannot boot it. Card might not function.
+	 */
+	if (!have_cfg)
+		return 0;
+
+	/* Card is, probably, already configured. */
+	if (tdfx_inl(par, DRAMINIT0) == le32_to_cpu(cfg.draminit0))
+		return 0;
+
+	dev_info(&pdev->dev,
+		 "Manually booting card using config table\n");
+
+	mempll = le32_to_cpu(cfg.pllctrl1);
+	gfxpll = le32_to_cpu(cfg.pllctrl2);
+	draminit0 = le32_to_cpu(cfg.draminit0);
+	draminit1 = le32_to_cpu(cfg.draminit1);
+	miscinit1 = le32_to_cpu(cfg.miscinit1);
+	dram_mode = le32_to_cpu(cfg.sgrammode);
+	tdfx_outl(par, PCIINIT0, le32_to_cpu(cfg.pciinit0));
+	tdfx_outl(par, AGPINIT, le32_to_cpu(cfg.agpinit0));
+
+	/* memory clock, and the graphics clock if the card wants one */
+	tdfx_outl(par, PLLCTRL1, mempll);
+	if (gfxpll)
+		tdfx_outl(par, PLLCTRL2, gfxpll);
+	/* flush posted writes */
+	tdfx_inl(par, PLLCTRL1);
+	/* PLL lock */
+	udelay(100);
+
+	tdfx_outl(par, MISCINIT1, miscinit1);
+	tdfx_outl(par, DRAMINIT0, draminit0);
+	tdfx_outl(par, DRAMINIT1, draminit1);
+
+	/* SDRAM/SGRAM wake up: load the mode register */
+	tdfx_outl(par, DRAMDATA, dram_mode);
+	tdfx_outl(par, DRAMCOMMAND, 0x10d);
+
+	tdfx_outl(par, LFBMEMORYCONFIG, 0x00001fff);
+	tdfx_outl(par, MISCINIT0, le32_to_cpu(cfg.miscinit0));
+
+	return 0;
+}
+
+static void do_write_regs(struct fb_info *info, struct banshee_reg *reg)
+{
+	struct tdfx_par *par = info->par;
+	int i;
+
+	banshee_wait_idle(info);
+
+	tdfx_outl(par, MISCINIT1, tdfx_inl(par, MISCINIT1) | 0x01);
+
+	/* Wake the VGA core if it hasn't already been woken up */
+	tdfx_outl(par, VGAINIT0, reg->vgainit0);
+	vga_outb(par, 0x3c3, 0x01);
+
+	crt_outb(par, 0x11, crt_inb(par, 0x11) & 0x7f); /* CRT unprotect */
+
+	banshee_make_room(par, 3);
+	tdfx_outl(par, VGAINIT1, reg->vgainit1 & 0x001FFFFF);
+	tdfx_outl(par, VIDPROCCFG, reg->vidcfg & ~0x00000001);
+#if 0
+	tdfx_outl(par, PLLCTRL1, reg->mempll);
+	tdfx_outl(par, PLLCTRL2, reg->gfxpll);
+#endif
+	tdfx_outl(par, PLLCTRL0, reg->vidpll);
+
+	vga_outb(par, MISC_W, reg->misc[0x00] | 0x01);
+
+	for (i = 0; i < 5; i++)
+		seq_outb(par, i, reg->seq[i]);
+
+	for (i = 0; i < 25; i++)
+		crt_outb(par, i, reg->crt[i]);
+
+	for (i = 0; i < 9; i++)
+		gra_outb(par, i, reg->gra[i]);
+
+	for (i = 0; i < 21; i++)
+		att_outb(par, i, reg->att[i]);
+
+	crt_outb(par, 0x1a, reg->ext[0]);
+	crt_outb(par, 0x1b, reg->ext[1]);
+
+	vga_enable_palette(par);
+	vga_enable_video(par);
+
+	banshee_make_room(par, 9);
+	tdfx_outl(par, VGAINIT0, reg->vgainit0);
+	tdfx_outl(par, DACMODE, reg->dacmode);
+	tdfx_outl(par, VIDDESKSTRIDE, reg->stride);
+	tdfx_outl(par, HWCURPATADDR, reg->curspataddr);
+
+	tdfx_outl(par, VIDSCREENSIZE, reg->screensize);
+	tdfx_outl(par, VIDDESKSTART, reg->startaddr);
+	tdfx_outl(par, VIDPROCCFG, reg->vidcfg);
+	tdfx_outl(par, VGAINIT1, reg->vgainit1);
+	tdfx_outl(par, MISCINIT0, reg->miscinit0);
+
+	banshee_make_room(par, 8);
+	tdfx_outl(par, SRCBASE, reg->startaddr);
+	tdfx_outl(par, DSTBASE, reg->startaddr);
+	tdfx_outl(par, COMMANDEXTRA_2D, 0);
+	tdfx_outl(par, CLIP0MIN, 0);
+	tdfx_outl(par, CLIP0MAX, 0x0fff0fff);
+	tdfx_outl(par, CLIP1MIN, 0);
+	tdfx_outl(par, CLIP1MAX, 0x0fff0fff);
+	tdfx_outl(par, SRCXY, 0);
+
+	banshee_wait_idle(info);
+}
+
+static unsigned long do_lfb_size(struct tdfx_par *par, unsigned short dev_id)
+{
+	u32 draminit0 = tdfx_inl(par, DRAMINIT0);
+	u32 draminit1 = tdfx_inl(par, DRAMINIT1);
+	u32 miscinit1;
+	int num_chips = (draminit0 & DRAMINIT0_SGRAM_NUM) ? 8 : 4;
+	int chip_size; /* in MB */
+	int has_sgram = draminit1 & DRAMINIT1_MEM_SDRAM;
+
+	if (dev_id < PCI_DEVICE_ID_3DFX_VOODOO5) {
+		/* Banshee/Voodoo3 */
+		chip_size = 2;
+		if (has_sgram && !(draminit0 & DRAMINIT0_SGRAM_TYPE))
+			chip_size = 1;
+	} else {
+		/* Voodoo4/5 */
+		has_sgram = 0;
+		chip_size = draminit0 & DRAMINIT0_SGRAM_TYPE_MASK;
+		chip_size = 1 << (chip_size >> DRAMINIT0_SGRAM_TYPE_SHIFT);
+	}
+
+	/* disable block writes for SDRAM */
+	miscinit1 = tdfx_inl(par, MISCINIT1);
+	miscinit1 |= has_sgram ? 0 : MISCINIT1_2DBLOCK_DIS;
+	miscinit1 |= MISCINIT1_CLUT_INV;
+
+	banshee_make_room(par, 1);
+	tdfx_outl(par, MISCINIT1, miscinit1);
+	return num_chips * chip_size * 1024l * 1024;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int tdfxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct tdfx_par *par = info->par;
+	u32 lpitch;
+
+	if (var->bits_per_pixel != 8  && var->bits_per_pixel != 16 &&
+	    var->bits_per_pixel != 24 && var->bits_per_pixel != 32) {
+		DPRINTK("depth not supported: %u\n", var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	if (var->xres != var->xres_virtual)
+		var->xres_virtual = var->xres;
+
+	if (var->yres > var->yres_virtual)
+		var->yres_virtual = var->yres;
+
+	if (var->xoffset) {
+		DPRINTK("xoffset not supported\n");
+		return -EINVAL;
+	}
+	var->yoffset = 0;
+
+	/*
+	 * Banshee doesn't support interlace, but Voodoo4/5 and probably
+	 * Voodoo3 do.
+	 * no direct information about device id now?
+	 *  use max_pixclock for this...
+	 */
+	if (((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) &&
+	    (par->max_pixclock < VOODOO3_MAX_PIXCLOCK)) {
+		DPRINTK("interlace not supported\n");
+		return -EINVAL;
+	}
+
+	if (info->monspecs.hfmax && info->monspecs.vfmax &&
+	    info->monspecs.dclkmax && fb_validate_mode(var, info) < 0) {
+		DPRINTK("mode outside monitor's specs\n");
+		return -EINVAL;
+	}
+
+	var->xres = (var->xres + 15) & ~15; /* could sometimes be 8 */
+	lpitch = var->xres * ((var->bits_per_pixel + 7) >> 3);
+
+	if (var->xres < 320 || var->xres > 2048) {
+		DPRINTK("width not supported: %u\n", var->xres);
+		return -EINVAL;
+	}
+
+	if (var->yres < 200 || var->yres > 2048) {
+		DPRINTK("height not supported: %u\n", var->yres);
+		return -EINVAL;
+	}
+
+	if (lpitch * var->yres_virtual > info->fix.smem_len) {
+		var->yres_virtual = info->fix.smem_len / lpitch;
+		if (var->yres_virtual < var->yres) {
+			DPRINTK("no memory for screen (%ux%ux%u)\n",
+				var->xres, var->yres_virtual,
+				var->bits_per_pixel);
+			return -EINVAL;
+		}
+	}
+
+	if (!var->pixclock)
+		return -EINVAL;
+
+	if (PICOS2KHZ(var->pixclock) > par->max_pixclock) {
+		DPRINTK("pixclock too high (%ldKHz)\n",
+			PICOS2KHZ(var->pixclock));
+		return -EINVAL;
+	}
+
+	var->transp.offset = 0;
+	var->transp.length = 0;
+	switch (var->bits_per_pixel) {
+	case 8:
+		var->red.length = 8;
+		var->red.offset = 0;
+		var->green = var->red;
+		var->blue = var->red;
+		break;
+	case 16:
+		var->red.offset   = 11;
+		var->red.length   = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset  = 0;
+		var->blue.length  = 5;
+		break;
+	case 32:
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		fallthrough;
+	case 24:
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	}
+	var->width = -1;
+	var->height = -1;
+
+	var->accel_flags = FB_ACCELF_TEXT;
+
+	DPRINTK("Checking graphics mode at %dx%d depth %d\n",
+		var->xres, var->yres, var->bits_per_pixel);
+	return 0;
+}
+
+static int tdfxfb_set_par(struct fb_info *info)
+{
+	struct tdfx_par *par = info->par;
+	u32 hdispend = info->var.xres;
+	u32 hsyncsta = hdispend + info->var.right_margin;
+	u32 hsyncend = hsyncsta + info->var.hsync_len;
+	u32 htotal   = hsyncend + info->var.left_margin;
+	u32 hd, hs, he, ht, hbs, hbe;
+	u32 vd, vs, ve, vt, vbs, vbe;
+	struct banshee_reg reg;
+	int fout, freq;
+	u32 wd;
+	u32 cpp = (info->var.bits_per_pixel + 7) >> 3;
+
+	memset(&reg, 0, sizeof(reg));
+
+	reg.vidcfg = VIDCFG_VIDPROC_ENABLE | VIDCFG_DESK_ENABLE |
+		     VIDCFG_CURS_X11 |
+		     ((cpp - 1) << VIDCFG_PIXFMT_SHIFT) |
+		     (cpp != 1 ? VIDCFG_CLUT_BYPASS : 0);
+
+	/* PLL settings */
+	freq = PICOS2KHZ(info->var.pixclock);
+
+	reg.vidcfg &= ~VIDCFG_2X;
+
+	if (freq > par->max_pixclock / 2) {
+		freq = freq > par->max_pixclock ? par->max_pixclock : freq;
+		reg.dacmode |= DACMODE_2X;
+		reg.vidcfg  |= VIDCFG_2X;
+		hdispend >>= 1;
+		hsyncsta >>= 1;
+		hsyncend >>= 1;
+		htotal   >>= 1;
+	}
+
+	wd = (hdispend >> 3) - 1;
+	hd  = wd;
+	hs  = (hsyncsta >> 3) - 1;
+	he  = (hsyncend >> 3) - 1;
+	ht  = (htotal >> 3) - 1;
+	hbs = hd;
+	hbe = ht;
+
+	if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
+		vd = (info->var.yres << 1) - 1;
+		vs  = vd + (info->var.lower_margin << 1);
+		ve  = vs + (info->var.vsync_len << 1);
+		vt = ve + (info->var.upper_margin << 1) - 1;
+		reg.screensize = info->var.xres | (info->var.yres << 13);
+		reg.vidcfg |= VIDCFG_HALF_MODE;
+		reg.crt[VGA_CRTC_MAX_SCAN] = 0x80;
+	} else {
+		vd = info->var.yres - 1;
+		vs  = vd + info->var.lower_margin;
+		ve  = vs + info->var.vsync_len;
+		vt = ve + info->var.upper_margin - 1;
+		reg.screensize = info->var.xres | (info->var.yres << 12);
+		reg.vidcfg &= ~VIDCFG_HALF_MODE;
+	}
+	vbs = vd;
+	vbe = vt;
+
+	/* this is all pretty standard VGA register stuffing */
+	reg.misc[0x00] = 0x0f |
+			(info->var.xres < 400 ? 0xa0 :
+			 info->var.xres < 480 ? 0x60 :
+			 info->var.xres < 768 ? 0xe0 : 0x20);
+
+	reg.gra[VGA_GFX_MODE]         = 0x40;
+	reg.gra[VGA_GFX_MISC]         = 0x05;
+	reg.gra[VGA_GFX_COMPARE_MASK] = 0x0f;
+	reg.gra[VGA_GFX_BIT_MASK]     = 0xff;
+
+	reg.att[VGA_ATC_PALETTE0]     = 0x00;
+	reg.att[VGA_ATC_PALETTE1]     = 0x01;
+	reg.att[VGA_ATC_PALETTE2]     = 0x02;
+	reg.att[VGA_ATC_PALETTE3]     = 0x03;
+	reg.att[VGA_ATC_PALETTE4]     = 0x04;
+	reg.att[VGA_ATC_PALETTE5]     = 0x05;
+	reg.att[VGA_ATC_PALETTE6]     = 0x06;
+	reg.att[VGA_ATC_PALETTE7]     = 0x07;
+	reg.att[VGA_ATC_PALETTE8]     = 0x08;
+	reg.att[VGA_ATC_PALETTE9]     = 0x09;
+	reg.att[VGA_ATC_PALETTEA]     = 0x0a;
+	reg.att[VGA_ATC_PALETTEB]     = 0x0b;
+	reg.att[VGA_ATC_PALETTEC]     = 0x0c;
+	reg.att[VGA_ATC_PALETTED]     = 0x0d;
+	reg.att[VGA_ATC_PALETTEE]     = 0x0e;
+	reg.att[VGA_ATC_PALETTEF]     = 0x0f;
+	reg.att[VGA_ATC_MODE]         = 0x41;
+	reg.att[VGA_ATC_PLANE_ENABLE] = 0x0f;
+
+	reg.seq[VGA_SEQ_RESET]         = 0x03;
+	reg.seq[VGA_SEQ_CLOCK_MODE]    = 0x01; /* fixme: clkdiv2? */
+	reg.seq[VGA_SEQ_PLANE_WRITE]   = 0x0f;
+	reg.seq[VGA_SEQ_CHARACTER_MAP] = 0x00;
+	reg.seq[VGA_SEQ_MEMORY_MODE]   = 0x0e;
+
+	reg.crt[VGA_CRTC_H_TOTAL]       = ht - 4;
+	reg.crt[VGA_CRTC_H_DISP]        = hd;
+	reg.crt[VGA_CRTC_H_BLANK_START] = hbs;
+	reg.crt[VGA_CRTC_H_BLANK_END]   = 0x80 | (hbe & 0x1f);
+	reg.crt[VGA_CRTC_H_SYNC_START]  = hs;
+	reg.crt[VGA_CRTC_H_SYNC_END]    = ((hbe & 0x20) << 2) | (he & 0x1f);
+	reg.crt[VGA_CRTC_V_TOTAL]       = vt;
+	reg.crt[VGA_CRTC_OVERFLOW]      = ((vs & 0x200) >> 2) |
+					  ((vd & 0x200) >> 3) |
+					  ((vt & 0x200) >> 4) | 0x10 |
+					  ((vbs & 0x100) >> 5) |
+					  ((vs & 0x100) >> 6) |
+					  ((vd & 0x100) >> 7) |
+					  ((vt & 0x100) >> 8);
+	reg.crt[VGA_CRTC_MAX_SCAN]     |= 0x40 | ((vbs & 0x200) >> 4);
+	reg.crt[VGA_CRTC_V_SYNC_START]  = vs;
+	reg.crt[VGA_CRTC_V_SYNC_END]    = (ve & 0x0f) | 0x20;
+	reg.crt[VGA_CRTC_V_DISP_END]    = vd;
+	reg.crt[VGA_CRTC_OFFSET]        = wd;
+	reg.crt[VGA_CRTC_V_BLANK_START] = vbs;
+	reg.crt[VGA_CRTC_V_BLANK_END]   = vbe + 1;
+	reg.crt[VGA_CRTC_MODE]          = 0xc3;
+	reg.crt[VGA_CRTC_LINE_COMPARE]  = 0xff;
+
+	/* Banshee's nonvga stuff */
+	reg.ext[0x00] = (((ht & 0x100) >> 8) |
+			((hd & 0x100) >> 6) |
+			((hbs & 0x100) >> 4) |
+			((hbe & 0x40) >> 1) |
+			((hs & 0x100) >> 2) |
+			((he & 0x20) << 2));
+	reg.ext[0x01] = (((vt & 0x400) >> 10) |
+			((vd & 0x400) >> 8) |
+			((vbs & 0x400) >> 6) |
+			((vbe & 0x400) >> 4));
+
+	reg.vgainit0 =	VGAINIT0_8BIT_DAC     |
+			VGAINIT0_EXT_ENABLE   |
+			VGAINIT0_WAKEUP_3C3   |
+			VGAINIT0_ALT_READBACK |
+			VGAINIT0_EXTSHIFTOUT;
+	reg.vgainit1 = tdfx_inl(par, VGAINIT1) & 0x1fffff;
+
+	if (hwcursor)
+		reg.curspataddr = info->fix.smem_len;
+
+	reg.cursloc   = 0;
+
+	reg.cursc0    = 0;
+	reg.cursc1    = 0xffffff;
+
+	reg.stride    = info->var.xres * cpp;
+	reg.startaddr = info->var.yoffset * reg.stride
+			+ info->var.xoffset * cpp;
+
+	reg.vidpll = do_calc_pll(freq, &fout);
+#if 0
+	reg.mempll = do_calc_pll(..., &fout);
+	reg.gfxpll = do_calc_pll(..., &fout);
+#endif
+
+	if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
+		reg.vidcfg |= VIDCFG_INTERLACE;
+	reg.miscinit0 = tdfx_inl(par, MISCINIT0);
+
+#if defined(__BIG_ENDIAN)
+	switch (info->var.bits_per_pixel) {
+	case 8:
+	case 24:
+		reg.miscinit0 &= ~(1 << 30);
+		reg.miscinit0 &= ~(1 << 31);
+		break;
+	case 16:
+		reg.miscinit0 |= (1 << 30);
+		reg.miscinit0 |= (1 << 31);
+		break;
+	case 32:
+		reg.miscinit0 |= (1 << 30);
+		reg.miscinit0 &= ~(1 << 31);
+		break;
+	}
+#endif
+	do_write_regs(info, &reg);
+
+	/* Now change fb_fix_screeninfo according to changes in par */
+	info->fix.line_length = reg.stride;
+	info->fix.visual = (info->var.bits_per_pixel == 8)
+				? FB_VISUAL_PSEUDOCOLOR
+				: FB_VISUAL_TRUECOLOR;
+	DPRINTK("Graphics mode is now set at %dx%d depth %d\n",
+		info->var.xres, info->var.yres, info->var.bits_per_pixel);
+	return 0;
+}
+
+/* A handy macro shamelessly pinched from matroxfb */
+#define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16)
+
+static int tdfxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			    unsigned blue, unsigned transp,
+			    struct fb_info *info)
+{
+	struct tdfx_par *par = info->par;
+	u32 rgbcol;
+
+	if (regno >= info->cmap.len || regno > 255)
+		return 1;
+
+	/* grayscale works only partially under directcolor */
+	if (info->var.grayscale) {
+		/* grayscale = 0.30*R + 0.59*G + 0.11*B */
+		blue = (red * 77 + green * 151 + blue * 28) >> 8;
+		green = blue;
+		red = blue;
+	}
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_PSEUDOCOLOR:
+		rgbcol = (((u32)red   & 0xff00) << 8) |
+			 (((u32)green & 0xff00) << 0) |
+			 (((u32)blue  & 0xff00) >> 8);
+		do_setpalentry(par, regno, rgbcol);
+		break;
+	/* Truecolor has no hardware color palettes. */
+	case FB_VISUAL_TRUECOLOR:
+		if (regno < 16) {
+			rgbcol = (CNVT_TOHW(red, info->var.red.length) <<
+				  info->var.red.offset) |
+				(CNVT_TOHW(green, info->var.green.length) <<
+				 info->var.green.offset) |
+				(CNVT_TOHW(blue, info->var.blue.length) <<
+				 info->var.blue.offset) |
+				(CNVT_TOHW(transp, info->var.transp.length) <<
+				 info->var.transp.offset);
+			par->palette[regno] = rgbcol;
+		}
+
+		break;
+	default:
+		DPRINTK("bad depth %u\n", info->var.bits_per_pixel);
+		break;
+	}
+
+	return 0;
+}
+
+/* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */
+static int tdfxfb_blank(int blank, struct fb_info *info)
+{
+	struct tdfx_par *par = info->par;
+	int vgablank = 1;
+	u32 dacmode = tdfx_inl(par, DACMODE);
+
+	dacmode &= ~(BIT(1) | BIT(3));
+
+	switch (blank) {
+	case FB_BLANK_UNBLANK: /* Screen: On; HSync: On, VSync: On */
+		vgablank = 0;
+		break;
+	case FB_BLANK_NORMAL: /* Screen: Off; HSync: On, VSync: On */
+		break;
+	case FB_BLANK_VSYNC_SUSPEND: /* Screen: Off; HSync: On, VSync: Off */
+		dacmode |= BIT(3);
+		break;
+	case FB_BLANK_HSYNC_SUSPEND: /* Screen: Off; HSync: Off, VSync: On */
+		dacmode |= BIT(1);
+		break;
+	case FB_BLANK_POWERDOWN: /* Screen: Off; HSync: Off, VSync: Off */
+		dacmode |= BIT(1) | BIT(3);
+		break;
+	}
+
+	banshee_make_room(par, 1);
+	tdfx_outl(par, DACMODE, dacmode);
+	if (vgablank)
+		vga_disable_video(par);
+	else
+		vga_enable_video(par);
+	return 0;
+}
+
+/*
+ * Set the starting position of the visible screen to var->yoffset
+ */
+static int tdfxfb_pan_display(struct fb_var_screeninfo *var,
+			      struct fb_info *info)
+{
+	struct tdfx_par *par = info->par;
+	u32 addr = var->yoffset * info->fix.line_length;
+
+	if (nopan || var->xoffset)
+		return -EINVAL;
+
+	banshee_make_room(par, 1);
+	tdfx_outl(par, VIDDESKSTART, addr);
+
+	return 0;
+}
+
+#ifdef CONFIG_FB_3DFX_ACCEL
+/*
+ * FillRect 2D command (solidfill or invert (via ROP_XOR))
+ */
+static void tdfxfb_fillrect(struct fb_info *info,
+			    const struct fb_fillrect *rect)
+{
+	struct tdfx_par *par = info->par;
+	u32 bpp = info->var.bits_per_pixel;
+	u32 stride = info->fix.line_length;
+	u32 fmt = stride | ((bpp + ((bpp == 8) ? 0 : 8)) << 13);
+	int tdfx_rop;
+	u32 dx = rect->dx;
+	u32 dy = rect->dy;
+	u32 dstbase = 0;
+
+	if (rect->rop == ROP_COPY)
+		tdfx_rop = TDFX_ROP_COPY;
+	else
+		tdfx_rop = TDFX_ROP_XOR;
+
+	/* assume always rect->height < 4096 */
+	if (dy + rect->height > 4095) {
+		dstbase = stride * dy;
+		dy = 0;
+	}
+	/* assume always rect->width < 4096 */
+	if (dx + rect->width > 4095) {
+		dstbase += dx * bpp >> 3;
+		dx = 0;
+	}
+	banshee_make_room(par, 6);
+	tdfx_outl(par, DSTFORMAT, fmt);
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
+		tdfx_outl(par, COLORFORE, rect->color);
+	} else { /* FB_VISUAL_TRUECOLOR */
+		tdfx_outl(par, COLORFORE, par->palette[rect->color]);
+	}
+	tdfx_outl(par, COMMAND_2D, COMMAND_2D_FILLRECT | (tdfx_rop << 24));
+	tdfx_outl(par, DSTBASE, dstbase);
+	tdfx_outl(par, DSTSIZE, rect->width | (rect->height << 16));
+	tdfx_outl(par, LAUNCH_2D, dx | (dy << 16));
+}
+
+/*
+ * Screen-to-Screen BitBlt 2D command (for the bmove fb op.)
+ */
+static void tdfxfb_copyarea(struct fb_info *info,
+			    const struct fb_copyarea *area)
+{
+	struct tdfx_par *par = info->par;
+	u32 sx = area->sx, sy = area->sy, dx = area->dx, dy = area->dy;
+	u32 bpp = info->var.bits_per_pixel;
+	u32 stride = info->fix.line_length;
+	u32 blitcmd = COMMAND_2D_S2S_BITBLT | (TDFX_ROP_COPY << 24);
+	u32 fmt = stride | ((bpp + ((bpp == 8) ? 0 : 8)) << 13);
+	u32 dstbase = 0;
+	u32 srcbase = 0;
+
+	/* assume always area->height < 4096 */
+	if (sy + area->height > 4095) {
+		srcbase = stride * sy;
+		sy = 0;
+	}
+	/* assume always area->width < 4096 */
+	if (sx + area->width > 4095) {
+		srcbase += sx * bpp >> 3;
+		sx = 0;
+	}
+	/* assume always area->height < 4096 */
+	if (dy + area->height > 4095) {
+		dstbase = stride * dy;
+		dy = 0;
+	}
+	/* assume always area->width < 4096 */
+	if (dx + area->width > 4095) {
+		dstbase += dx * bpp >> 3;
+		dx = 0;
+	}
+
+	if (area->sx <= area->dx) {
+		/* -X */
+		blitcmd |= BIT(14);
+		sx += area->width - 1;
+		dx += area->width - 1;
+	}
+	if (area->sy <= area->dy) {
+		/* -Y */
+		blitcmd |= BIT(15);
+		sy += area->height - 1;
+		dy += area->height - 1;
+	}
+
+	banshee_make_room(par, 8);
+
+	tdfx_outl(par, SRCFORMAT, fmt);
+	tdfx_outl(par, DSTFORMAT, fmt);
+	tdfx_outl(par, COMMAND_2D, blitcmd);
+	tdfx_outl(par, DSTSIZE, area->width | (area->height << 16));
+	tdfx_outl(par, DSTXY, dx | (dy << 16));
+	tdfx_outl(par, SRCBASE, srcbase);
+	tdfx_outl(par, DSTBASE, dstbase);
+	tdfx_outl(par, LAUNCH_2D, sx | (sy << 16));
+}
+
+static void tdfxfb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct tdfx_par *par = info->par;
+	int size = image->height * ((image->width * image->depth + 7) >> 3);
+	int fifo_free;
+	int i, stride = info->fix.line_length;
+	u32 bpp = info->var.bits_per_pixel;
+	u32 dstfmt = stride | ((bpp + ((bpp == 8) ? 0 : 8)) << 13);
+	u8 *chardata = (u8 *) image->data;
+	u32 srcfmt;
+	u32 dx = image->dx;
+	u32 dy = image->dy;
+	u32 dstbase = 0;
+
+	if (image->depth != 1) {
+#ifdef BROKEN_CODE
+		banshee_make_room(par, 6 + ((size + 3) >> 2));
+		srcfmt = stride | ((bpp + ((bpp == 8) ? 0 : 8)) << 13) |
+			0x400000;
+#else
+		cfb_imageblit(info, image);
+#endif
+		return;
+	}
+	banshee_make_room(par, 9);
+	switch (info->fix.visual) {
+	case FB_VISUAL_PSEUDOCOLOR:
+		tdfx_outl(par, COLORFORE, image->fg_color);
+		tdfx_outl(par, COLORBACK, image->bg_color);
+		break;
+	case FB_VISUAL_TRUECOLOR:
+	default:
+		tdfx_outl(par, COLORFORE,
+			  par->palette[image->fg_color]);
+		tdfx_outl(par, COLORBACK,
+			  par->palette[image->bg_color]);
+	}
+#ifdef __BIG_ENDIAN
+	srcfmt = 0x400000 | BIT(20);
+#else
+	srcfmt = 0x400000;
+#endif
+	/* assume always image->height < 4096 */
+	if (dy + image->height > 4095) {
+		dstbase = stride * dy;
+		dy = 0;
+	}
+	/* assume always image->width < 4096 */
+	if (dx + image->width > 4095) {
+		dstbase += dx * bpp >> 3;
+		dx = 0;
+	}
+
+	tdfx_outl(par, DSTBASE, dstbase);
+	tdfx_outl(par, SRCXY, 0);
+	tdfx_outl(par, DSTXY, dx | (dy << 16));
+	tdfx_outl(par, COMMAND_2D,
+		  COMMAND_2D_H2S_BITBLT | (TDFX_ROP_COPY << 24));
+	tdfx_outl(par, SRCFORMAT, srcfmt);
+	tdfx_outl(par, DSTFORMAT, dstfmt);
+	tdfx_outl(par, DSTSIZE, image->width | (image->height << 16));
+
+	/* A count of how many free FIFO entries we've requested.
+	 * When this goes negative, we need to request more. */
+	fifo_free = 0;
+
+	/* Send four bytes at a time of data */
+	for (i = (size >> 2); i > 0; i--) {
+		if (--fifo_free < 0) {
+			fifo_free = 31;
+			banshee_make_room(par, fifo_free);
+		}
+		tdfx_outl(par, LAUNCH_2D, *(u32 *)chardata);
+		chardata += 4;
+	}
+
+	/* Send the leftovers now */
+	banshee_make_room(par, 3);
+	switch (size % 4) {
+	case 0:
+		break;
+	case 1:
+		tdfx_outl(par, LAUNCH_2D, *chardata);
+		break;
+	case 2:
+		tdfx_outl(par, LAUNCH_2D, *(u16 *)chardata);
+		break;
+	case 3:
+		tdfx_outl(par, LAUNCH_2D,
+			*(u16 *)chardata | (chardata[3] << 24));
+		break;
+	}
+}
+#endif /* CONFIG_FB_3DFX_ACCEL */
+
+static int tdfxfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct tdfx_par *par = info->par;
+	u32 vidcfg;
+
+	if (!hwcursor)
+		return -EINVAL;	/* just to force soft_cursor() call */
+
+	/* Too large of a cursor or wrong bpp :-( */
+	if (cursor->image.width > 64 ||
+	    cursor->image.height > 64 ||
+	    cursor->image.depth > 1)
+		return -EINVAL;
+
+	vidcfg = tdfx_inl(par, VIDPROCCFG);
+	if (cursor->enable)
+		tdfx_outl(par, VIDPROCCFG, vidcfg | VIDCFG_HWCURSOR_ENABLE);
+	else
+		tdfx_outl(par, VIDPROCCFG, vidcfg & ~VIDCFG_HWCURSOR_ENABLE);
+
+	/*
+	 * If the cursor is not be changed this means either we want the
+	 * current cursor state (if enable is set) or we want to query what
+	 * we can do with the cursor (if enable is not set)
+	 */
+	if (!cursor->set)
+		return 0;
+
+	/* fix cursor color - XFree86 forgets to restore it properly */
+	if (cursor->set & FB_CUR_SETCMAP) {
+		struct fb_cmap cmap = info->cmap;
+		u32 bg_idx = cursor->image.bg_color;
+		u32 fg_idx = cursor->image.fg_color;
+		unsigned long bg_color, fg_color;
+
+		fg_color = (((u32)cmap.red[fg_idx]   & 0xff00) << 8) |
+			   (((u32)cmap.green[fg_idx] & 0xff00) << 0) |
+			   (((u32)cmap.blue[fg_idx]  & 0xff00) >> 8);
+		bg_color = (((u32)cmap.red[bg_idx]   & 0xff00) << 8) |
+			   (((u32)cmap.green[bg_idx] & 0xff00) << 0) |
+			   (((u32)cmap.blue[bg_idx]  & 0xff00) >> 8);
+		banshee_make_room(par, 2);
+		tdfx_outl(par, HWCURC0, bg_color);
+		tdfx_outl(par, HWCURC1, fg_color);
+	}
+
+	if (cursor->set & FB_CUR_SETPOS) {
+		int x = cursor->image.dx;
+		int y = cursor->image.dy - info->var.yoffset;
+
+		x += 63;
+		y += 63;
+		banshee_make_room(par, 1);
+		tdfx_outl(par, HWCURLOC, (y << 16) + x);
+	}
+	if (cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE)) {
+		/*
+		 * Voodoo 3 and above cards use 2 monochrome cursor patterns.
+		 *    The reason is so the card can fetch 8 words at a time
+		 * and are stored on chip for use for the next 8 scanlines.
+		 * This reduces the number of times for access to draw the
+		 * cursor for each screen refresh.
+		 *    Each pattern is a bitmap of 64 bit wide and 64 bit high
+		 * (total of 8192 bits or 1024 bytes). The two patterns are
+		 * stored in such a way that pattern 0 always resides in the
+		 * lower half (least significant 64 bits) of a 128 bit word
+		 * and pattern 1 the upper half. If you examine the data of
+		 * the cursor image the graphics card uses then from the
+		 * beginning you see line one of pattern 0, line one of
+		 * pattern 1, line two of pattern 0, line two of pattern 1,
+		 * etc etc. The linear stride for the cursor is always 16 bytes
+		 * (128 bits) which is the maximum cursor width times two for
+		 * the two monochrome patterns.
+		 */
+		u8 __iomem *cursorbase = info->screen_base + info->fix.smem_len;
+		u8 *bitmap = (u8 *)cursor->image.data;
+		u8 *mask = (u8 *)cursor->mask;
+		int i;
+
+		fb_memset_io(cursorbase, 0, 1024);
+
+		for (i = 0; i < cursor->image.height; i++) {
+			int h = 0;
+			int j = (cursor->image.width + 7) >> 3;
+
+			for (; j > 0; j--) {
+				u8 data = *mask ^ *bitmap;
+				if (cursor->rop == ROP_COPY)
+					data = *mask & *bitmap;
+				/* Pattern 0. Copy the cursor mask to it */
+				fb_writeb(*mask, cursorbase + h);
+				mask++;
+				/* Pattern 1. Copy the cursor bitmap to it */
+				fb_writeb(data, cursorbase + h + 8);
+				bitmap++;
+				h++;
+			}
+			cursorbase += 16;
+		}
+	}
+	return 0;
+}
+
+static const struct fb_ops tdfxfb_ops = {
+	.owner		= THIS_MODULE,
+	__FB_DEFAULT_IOMEM_OPS_RDWR,
+	.fb_check_var	= tdfxfb_check_var,
+	.fb_set_par	= tdfxfb_set_par,
+	.fb_setcolreg	= tdfxfb_setcolreg,
+	.fb_blank	= tdfxfb_blank,
+	.fb_pan_display	= tdfxfb_pan_display,
+	.fb_sync	= banshee_wait_idle,
+	.fb_cursor	= tdfxfb_cursor,
+#ifdef CONFIG_FB_3DFX_ACCEL
+	.fb_fillrect	= tdfxfb_fillrect,
+	.fb_copyarea	= tdfxfb_copyarea,
+	.fb_imageblit	= tdfxfb_imageblit,
+#else
+	__FB_DEFAULT_IOMEM_OPS_DRAW,
+#endif
+	__FB_DEFAULT_IOMEM_OPS_MMAP,
+};
+
+#ifdef CONFIG_FB_3DFX_I2C
+/* The voo GPIO registers don't have individual masks for each bit
+   so we always have to read before writing. */
+
+static void tdfxfb_i2c_setscl(void *data, int val)
+{
+	struct tdfxfb_i2c_chan 	*chan = data;
+	struct tdfx_par 	*par = chan->par;
+	unsigned int r;
+
+	r = tdfx_inl(par, VIDSERPARPORT);
+	if (val)
+		r |= I2C_SCL_OUT;
+	else
+		r &= ~I2C_SCL_OUT;
+	tdfx_outl(par, VIDSERPARPORT, r);
+	tdfx_inl(par, VIDSERPARPORT);	/* flush posted write */
+}
+
+static void tdfxfb_i2c_setsda(void *data, int val)
+{
+	struct tdfxfb_i2c_chan 	*chan = data;
+	struct tdfx_par 	*par = chan->par;
+	unsigned int r;
+
+	r = tdfx_inl(par, VIDSERPARPORT);
+	if (val)
+		r |= I2C_SDA_OUT;
+	else
+		r &= ~I2C_SDA_OUT;
+	tdfx_outl(par, VIDSERPARPORT, r);
+	tdfx_inl(par, VIDSERPARPORT);	/* flush posted write */
+}
+
+/* The GPIO pins are open drain, so the pins always remain outputs.
+   We rely on the i2c-algo-bit routines to set the pins high before
+   reading the input from other chips. */
+
+static int tdfxfb_i2c_getscl(void *data)
+{
+	struct tdfxfb_i2c_chan 	*chan = data;
+	struct tdfx_par 	*par = chan->par;
+
+	return (0 != (tdfx_inl(par, VIDSERPARPORT) & I2C_SCL_IN));
+}
+
+static int tdfxfb_i2c_getsda(void *data)
+{
+	struct tdfxfb_i2c_chan 	*chan = data;
+	struct tdfx_par 	*par = chan->par;
+
+	return (0 != (tdfx_inl(par, VIDSERPARPORT) & I2C_SDA_IN));
+}
+
+static void tdfxfb_ddc_setscl(void *data, int val)
+{
+	struct tdfxfb_i2c_chan 	*chan = data;
+	struct tdfx_par 	*par = chan->par;
+	unsigned int r;
+
+	r = tdfx_inl(par, VIDSERPARPORT);
+	if (val)
+		r |= DDC_SCL_OUT;
+	else
+		r &= ~DDC_SCL_OUT;
+	tdfx_outl(par, VIDSERPARPORT, r);
+	tdfx_inl(par, VIDSERPARPORT);	/* flush posted write */
+}
+
+static void tdfxfb_ddc_setsda(void *data, int val)
+{
+	struct tdfxfb_i2c_chan 	*chan = data;
+	struct tdfx_par 	*par = chan->par;
+	unsigned int r;
+
+	r = tdfx_inl(par, VIDSERPARPORT);
+	if (val)
+		r |= DDC_SDA_OUT;
+	else
+		r &= ~DDC_SDA_OUT;
+	tdfx_outl(par, VIDSERPARPORT, r);
+	tdfx_inl(par, VIDSERPARPORT);	/* flush posted write */
+}
+
+static int tdfxfb_ddc_getscl(void *data)
+{
+	struct tdfxfb_i2c_chan 	*chan = data;
+	struct tdfx_par 	*par = chan->par;
+
+	return (0 != (tdfx_inl(par, VIDSERPARPORT) & DDC_SCL_IN));
+}
+
+static int tdfxfb_ddc_getsda(void *data)
+{
+	struct tdfxfb_i2c_chan 	*chan = data;
+	struct tdfx_par 	*par = chan->par;
+
+	return (0 != (tdfx_inl(par, VIDSERPARPORT) & DDC_SDA_IN));
+}
+
+static int tdfxfb_setup_ddc_bus(struct tdfxfb_i2c_chan *chan, const char *name,
+				struct device *dev)
+{
+	int rc;
+
+	strscpy(chan->adapter.name, name, sizeof(chan->adapter.name));
+	chan->adapter.owner		= THIS_MODULE;
+	chan->adapter.algo_data		= &chan->algo;
+	chan->adapter.dev.parent	= dev;
+	chan->algo.setsda		= tdfxfb_ddc_setsda;
+	chan->algo.setscl		= tdfxfb_ddc_setscl;
+	chan->algo.getsda		= tdfxfb_ddc_getsda;
+	chan->algo.getscl		= tdfxfb_ddc_getscl;
+	chan->algo.udelay		= 10;
+	chan->algo.timeout		= msecs_to_jiffies(500);
+	chan->algo.data 		= chan;
+
+	i2c_set_adapdata(&chan->adapter, chan);
+
+	rc = i2c_bit_add_bus(&chan->adapter);
+	if (rc == 0)
+		DPRINTK("I2C bus %s registered.\n", name);
+	else
+		chan->par = NULL;
+
+	return rc;
+}
+
+static int tdfxfb_setup_i2c_bus(struct tdfxfb_i2c_chan *chan, const char *name,
+				struct device *dev)
+{
+	int rc;
+
+	strscpy(chan->adapter.name, name, sizeof(chan->adapter.name));
+	chan->adapter.owner		= THIS_MODULE;
+	chan->adapter.algo_data		= &chan->algo;
+	chan->adapter.dev.parent	= dev;
+	chan->algo.setsda		= tdfxfb_i2c_setsda;
+	chan->algo.setscl		= tdfxfb_i2c_setscl;
+	chan->algo.getsda		= tdfxfb_i2c_getsda;
+	chan->algo.getscl		= tdfxfb_i2c_getscl;
+	chan->algo.udelay		= 10;
+	chan->algo.timeout		= msecs_to_jiffies(500);
+	chan->algo.data 		= chan;
+
+	i2c_set_adapdata(&chan->adapter, chan);
+
+	rc = i2c_bit_add_bus(&chan->adapter);
+	if (rc == 0)
+		DPRINTK("I2C bus %s registered.\n", name);
+	else
+		chan->par = NULL;
+
+	return rc;
+}
+
+static void tdfxfb_create_i2c_busses(struct fb_info *info)
+{
+	struct tdfx_par *par = info->par;
+
+	tdfx_outl(par, VIDINFORMAT, 0x8160);
+	tdfx_outl(par, VIDSERPARPORT, 0xcffc0020);
+
+	par->chan[0].par = par;
+	par->chan[1].par = par;
+
+	tdfxfb_setup_ddc_bus(&par->chan[0], "Voodoo3-DDC", info->device);
+	tdfxfb_setup_i2c_bus(&par->chan[1], "Voodoo3-I2C", info->device);
+}
+
+static void tdfxfb_delete_i2c_busses(struct tdfx_par *par)
+{
+	if (par->chan[0].par)
+		i2c_del_adapter(&par->chan[0].adapter);
+	par->chan[0].par = NULL;
+
+	if (par->chan[1].par)
+		i2c_del_adapter(&par->chan[1].adapter);
+	par->chan[1].par = NULL;
+}
+
+static int tdfxfb_probe_i2c_connector(struct tdfx_par *par,
+				      struct fb_monspecs *specs)
+{
+	u8 *edid = NULL;
+
+	DPRINTK("Probe DDC Bus\n");
+	if (par->chan[0].par)
+		edid = fb_ddc_read(&par->chan[0].adapter);
+
+	if (edid) {
+		fb_edid_to_monspecs(edid, specs);
+		kfree(edid);
+		return 0;
+	}
+	return 1;
+}
+#endif /* CONFIG_FB_3DFX_I2C */
+
+/**
+ *      tdfxfb_probe - Device Initializiation
+ *
+ *      @pdev:  PCI Device to initialize
+ *      @id:    PCI Device ID
+ *
+ *      Initializes and allocates resources for PCI device @pdev.
+ *
+ */
+static int tdfxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct tdfx_par *default_par;
+	struct fb_info *info;
+	int err, lpitch;
+	struct fb_monspecs *specs;
+	bool found;
+
+	err = aperture_remove_conflicting_pci_devices(pdev, "tdfxfb");
+	if (err)
+		return err;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR "tdfxfb: Can't enable pdev: %d\n", err);
+		return err;
+	}
+
+	info = framebuffer_alloc(sizeof(struct tdfx_par), &pdev->dev);
+
+	if (!info)
+		return -ENOMEM;
+
+	default_par = info->par;
+	info->fix = tdfx_fix;
+
+	/* Configure the default fb_fix_screeninfo first */
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_3DFX_BANSHEE:
+		strcpy(info->fix.id, "3Dfx Banshee");
+		default_par->max_pixclock = BANSHEE_MAX_PIXCLOCK;
+		break;
+	case PCI_DEVICE_ID_3DFX_VOODOO3:
+		strcpy(info->fix.id, "3Dfx Voodoo3");
+		default_par->max_pixclock = VOODOO3_MAX_PIXCLOCK;
+		break;
+	case PCI_DEVICE_ID_3DFX_VOODOO5:
+		strcpy(info->fix.id, "3Dfx Voodoo5");
+		default_par->max_pixclock = VOODOO5_MAX_PIXCLOCK;
+		break;
+	}
+
+	info->fix.mmio_start = pci_resource_start(pdev, 0);
+	info->fix.mmio_len = pci_resource_len(pdev, 0);
+	if (!request_mem_region(info->fix.mmio_start, info->fix.mmio_len,
+				"tdfx regbase")) {
+		printk(KERN_ERR "tdfxfb: Can't reserve regbase\n");
+		goto out_err;
+	}
+
+	default_par->regbase_virt =
+		ioremap(info->fix.mmio_start, info->fix.mmio_len);
+	if (!default_par->regbase_virt) {
+		printk(KERN_ERR "fb: Can't remap %s register area.\n",
+				info->fix.id);
+		goto out_err_regbase;
+	}
+
+	if (tdfxfb_hw_init(info, pdev))
+		goto out_err_regbase;
+
+	info->fix.smem_start = pci_resource_start(pdev, 1);
+	info->fix.smem_len = do_lfb_size(default_par, pdev->device);
+	if (!info->fix.smem_len) {
+		printk(KERN_ERR "fb: Can't count %s memory.\n", info->fix.id);
+		goto out_err_regbase;
+	}
+
+	if (!request_mem_region(info->fix.smem_start,
+				pci_resource_len(pdev, 1), "tdfx smem")) {
+		printk(KERN_ERR "tdfxfb: Can't reserve smem\n");
+		goto out_err_regbase;
+	}
+
+	info->screen_base = ioremap_wc(info->fix.smem_start,
+				       info->fix.smem_len);
+	if (!info->screen_base) {
+		printk(KERN_ERR "fb: Can't remap %s framebuffer.\n",
+				info->fix.id);
+		goto out_err_screenbase;
+	}
+
+	default_par->iobase = pci_resource_start(pdev, 2);
+
+	if (!request_region(pci_resource_start(pdev, 2),
+			    pci_resource_len(pdev, 2), "tdfx iobase")) {
+		printk(KERN_ERR "tdfxfb: Can't reserve iobase\n");
+		goto out_err_screenbase;
+	}
+
+	printk(KERN_INFO "fb: %s memory = %dK\n", info->fix.id,
+			info->fix.smem_len >> 10);
+
+	if (!nomtrr)
+		default_par->wc_cookie= arch_phys_wc_add(info->fix.smem_start,
+							 info->fix.smem_len);
+
+	info->fix.ypanstep	= nopan ? 0 : 1;
+	info->fix.ywrapstep	= nowrap ? 0 : 1;
+
+	info->fbops		= &tdfxfb_ops;
+	info->pseudo_palette	= default_par->palette;
+	info->flags		= FBINFO_HWACCEL_YPAN;
+#ifdef CONFIG_FB_3DFX_ACCEL
+	info->flags		|= FBINFO_HWACCEL_FILLRECT |
+				   FBINFO_HWACCEL_COPYAREA |
+				   FBINFO_HWACCEL_IMAGEBLIT |
+				   FBINFO_READS_FAST;
+#endif
+	/* reserve 8192 bits for cursor */
+	/* the 2.4 driver says PAGE_MASK boundary is not enough for Voodoo4 */
+	if (hwcursor)
+		info->fix.smem_len = (info->fix.smem_len - 1024) &
+					(PAGE_MASK << 1);
+	specs = &info->monspecs;
+	found = false;
+	info->var.bits_per_pixel = 8;
+#ifdef CONFIG_FB_3DFX_I2C
+	tdfxfb_create_i2c_busses(info);
+	err = tdfxfb_probe_i2c_connector(default_par, specs);
+
+	if (!err) {
+		if (specs->modedb == NULL)
+			DPRINTK("Unable to get Mode Database\n");
+		else {
+			const struct fb_videomode *m;
+
+			fb_videomode_to_modelist(specs->modedb,
+						 specs->modedb_len,
+						 &info->modelist);
+			m = fb_find_best_display(specs, &info->modelist);
+			if (m) {
+				fb_videomode_to_var(&info->var, m);
+				/* fill all other info->var's fields */
+				if (tdfxfb_check_var(&info->var, info) < 0)
+					info->var = tdfx_var;
+				else
+					found = true;
+			}
+		}
+	}
+#endif
+	if (!mode_option && !found)
+		mode_option = "640x480@60";
+
+	if (mode_option) {
+		err = fb_find_mode(&info->var, info, mode_option,
+				   specs->modedb, specs->modedb_len,
+				   NULL, info->var.bits_per_pixel);
+		if (!err || err == 4)
+			info->var = tdfx_var;
+	}
+
+	if (found) {
+		fb_destroy_modedb(specs->modedb);
+		specs->modedb = NULL;
+	}
+
+	/* maximize virtual vertical length */
+	lpitch = info->var.xres_virtual * ((info->var.bits_per_pixel + 7) >> 3);
+	info->var.yres_virtual = info->fix.smem_len / lpitch;
+	if (info->var.yres_virtual < info->var.yres)
+		goto out_err_iobase;
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+		printk(KERN_ERR "tdfxfb: Can't allocate color map\n");
+		goto out_err_iobase;
+	}
+
+	/*
+	 * Program a video mode and clear the framebuffer now, this
+	 * ensures the display comes up even if fbcon doesn't bind
+	 * when the framebuffer is registered.
+	 */
+	tdfxfb_set_par(info);
+	memset_io(info->screen_base, 0, info->fix.smem_len);
+
+	if (register_framebuffer(info) < 0) {
+		printk(KERN_ERR "tdfxfb: can't register framebuffer\n");
+		fb_dealloc_cmap(&info->cmap);
+		goto out_err_iobase;
+	}
+	/*
+	 * Our driver data
+	 */
+	pci_set_drvdata(pdev, info);
+	return 0;
+
+out_err_iobase:
+#ifdef CONFIG_FB_3DFX_I2C
+	fb_destroy_modelist(&info->modelist);
+	tdfxfb_delete_i2c_busses(default_par);
+#endif
+	arch_phys_wc_del(default_par->wc_cookie);
+	release_region(pci_resource_start(pdev, 2),
+		       pci_resource_len(pdev, 2));
+out_err_screenbase:
+	if (info->screen_base)
+		iounmap(info->screen_base);
+	release_mem_region(info->fix.smem_start, pci_resource_len(pdev, 1));
+out_err_regbase:
+	/*
+	 * Cleanup after anything that was remapped/allocated.
+	 */
+	if (default_par->regbase_virt)
+		iounmap(default_par->regbase_virt);
+	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+out_err:
+	framebuffer_release(info);
+	return -ENXIO;
+}
+
+#ifndef MODULE
+static void __init tdfxfb_setup(char *options)
+{
+	char *this_opt;
+
+	if (!options || !*options)
+		return;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		if (!*this_opt)
+			continue;
+		if (!strcmp(this_opt, "nopan")) {
+			nopan = 1;
+		} else if (!strcmp(this_opt, "nowrap")) {
+			nowrap = 1;
+		} else if (!strncmp(this_opt, "hwcursor=", 9)) {
+			hwcursor = simple_strtoul(this_opt + 9, NULL, 0);
+		} else if (!strncmp(this_opt, "nomtrr", 6)) {
+			nomtrr = 1;
+		} else {
+			mode_option = this_opt;
+		}
+	}
+}
+#endif
+
+/**
+ *      tdfxfb_remove - Device removal
+ *
+ *      @pdev:  PCI Device to cleanup
+ *
+ *      Releases all resources allocated during the course of the driver's
+ *      lifetime for the PCI device @pdev.
+ *
+ */
+static void tdfxfb_remove(struct pci_dev *pdev)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+	struct tdfx_par *par = info->par;
+
+	unregister_framebuffer(info);
+#ifdef CONFIG_FB_3DFX_I2C
+	tdfxfb_delete_i2c_busses(par);
+#endif
+	arch_phys_wc_del(par->wc_cookie);
+	iounmap(par->regbase_virt);
+	iounmap(info->screen_base);
+
+	/* Clean up after reserved regions */
+	release_region(pci_resource_start(pdev, 2),
+		       pci_resource_len(pdev, 2));
+	release_mem_region(pci_resource_start(pdev, 1),
+			   pci_resource_len(pdev, 1));
+	release_mem_region(pci_resource_start(pdev, 0),
+			   pci_resource_len(pdev, 0));
+	fb_dealloc_cmap(&info->cmap);
+	framebuffer_release(info);
+}
+
+static int __init tdfxfb_init(void)
+{
+#ifndef MODULE
+	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("tdfxfb"))
+		return -ENODEV;
+
+#ifndef MODULE
+	if (fb_get_options("tdfxfb", &option))
+		return -ENODEV;
+
+	tdfxfb_setup(option);
+#endif
+	return pci_register_driver(&tdfxfb_driver);
+}
+
+static void __exit tdfxfb_exit(void)
+{
+	pci_unregister_driver(&tdfxfb_driver);
+}
+
+MODULE_AUTHOR("Hannu Mallat <hmallat@cc.hut.fi>");
+MODULE_DESCRIPTION("3Dfx framebuffer device driver");
+MODULE_LICENSE("GPL");
+
+module_param(hwcursor, int, 0644);
+MODULE_PARM_DESC(hwcursor, "Enable hardware cursor "
+			"(1=enable, 0=disable, default=1)");
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'");
+module_param(nomtrr, bool, 0);
+MODULE_PARM_DESC(nomtrr, "Disable MTRR support (default: enabled)");
+
+module_init(tdfxfb_init);
+module_exit(tdfxfb_exit);
-- 
cgit v1.3.1