From e1c13aed4a1641550e8c9518c96f016e1d52d09b Mon Sep 17 00:00:00 2001
From: Yijie Yang <yijie.yang@oss.qualcomm.com>
Date: Tue, 11 Aug 2026 16:46:47 +0800
Subject: dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible

Add the Qualcomm Maili SoC compatible string for the CPU bandwidth
monitor (BWMONv4). This falls back to the sdm845-bwmon compatible,
consistent with the existing pattern used by other recent SoCs such as
sm8750 and kaanapali.

Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260811-bwmon-v2-1-80f7f150ab9e@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 drivers/video/fbdev/stifb.c | 1531 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 1531 insertions(+)
 create mode 100644 drivers/video/fbdev/stifb.c

(limited to 'drivers/video/fbdev/stifb.c')

diff --git a/drivers/video/fbdev/stifb.c b/drivers/video/fbdev/stifb.c
new file mode 100644
index 000000000..8e5bac275
--- /dev/null
+++ b/drivers/video/fbdev/stifb.c
@@ -0,0 +1,1531 @@
+/*
+ * linux/drivers/video/stifb.c -
+ * Low level Frame buffer driver for HP workstations with
+ * STI (standard text interface) video firmware.
+ *
+ * Copyright (C) 2001-2006 Helge Deller <deller@gmx.de>
+ * Portions Copyright (C) 2001 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ *
+ * Based on:
+ * - linux/drivers/video/artistfb.c -- Artist frame buffer driver
+ *	Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ *   - based on skeletonfb, which was
+ *	Created 28 Dec 1997 by Geert Uytterhoeven
+ * - HP Xhp cfb-based X11 window driver for XFree86
+ *	(c)Copyright 1992 Hewlett-Packard Co.
+ *
+ *
+ *  The following graphics display devices (NGLE family) are supported by this driver:
+ *
+ *  HPA4070A	known as "HCRX", a 1280x1024 color device with 8 planes
+ *  HPA4071A	known as "HCRX24", a 1280x1024 color device with 24 planes,
+ *		optionally available with a hardware accelerator as HPA4071A_Z
+ *  HPA1659A	known as "CRX", a 1280x1024 color device with 8 planes
+ *  HPA1439A	known as "CRX24", a 1280x1024 color device with 24 planes,
+ *		optionally available with a hardware accelerator.
+ *  HPA1924A	known as "GRX", a 1280x1024 grayscale device with 8 planes
+ *  HPA2269A	known as "Dual CRX", a 1280x1024 color device with 8 planes,
+ *		implements support for two displays on a single graphics card.
+ *  HP710C	internal graphics support optionally available on the HP9000s710 SPU,
+ *		supports 1280x1024 color displays with 8 planes.
+ *  HP710G	same as HP710C, 1280x1024 grayscale only
+ *  HP710L	same as HP710C, 1024x768 color only
+ *  HP712	internal graphics support on HP9000s712 SPU, supports 640x480,
+ *		1024x768 or 1280x1024 color displays on 8 planes (Artist)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/* TODO:
+ *	- 1bpp mode is completely untested
+ *	- add support for h/w acceleration
+ *	- add hardware cursor
+ *	- automatically disable double buffering (e.g. on RDI precisionbook laptop)
+ */
+
+
+/* on supported graphic devices you may:
+ * #define FALLBACK_TO_1BPP to fall back to 1 bpp, or
+ * #undef  FALLBACK_TO_1BPP to reject support for unsupported cards */
+#undef FALLBACK_TO_1BPP
+
+#undef DEBUG_STIFB_REGS		/* debug sti register accesses */
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include <asm/grfioctl.h>	/* for HP-UX compatibility */
+#include <linux/uaccess.h>
+
+#include <video/sticore.h>
+
+/* REGION_BASE(fb_info, index) returns the physical address for region <index> */
+#define REGION_BASE(fb_info, index) \
+	F_EXTEND(fb_info->sti->regions_phys[index])
+
+#define NGLEDEVDEPROM_CRT_REGION 1
+
+#define NR_PALETTE 256
+
+typedef struct {
+	__s32	video_config_reg;
+	__s32	misc_video_start;
+	__s32	horiz_timing_fmt;
+	__s32	serr_timing_fmt;
+	__s32	vert_timing_fmt;
+	__s32	horiz_state;
+	__s32	vert_state;
+	__s32	vtg_state_elements;
+	__s32	pipeline_delay;
+	__s32	misc_video_end;
+} video_setup_t;
+
+typedef struct {
+	__s16	sizeof_ngle_data;
+	__s16	x_size_visible;	    /* visible screen dim in pixels  */
+	__s16	y_size_visible;
+	__s16	pad2[15];
+	__s16	cursor_pipeline_delay;
+	__s16	video_interleaves;
+	__s32	pad3[11];
+} ngle_rom_t;
+
+struct stifb_info {
+	struct fb_info *info;
+	unsigned int id;
+	ngle_rom_t ngle_rom;
+	struct sti_struct *sti;
+	int deviceSpecificConfig;
+	u32 pseudo_palette[16];
+};
+
+static int __initdata stifb_bpp_pref[MAX_STI_ROMS];
+
+/* ------------------- chipset specific functions -------------------------- */
+
+/* offsets to graphic-chip internal registers */
+
+#define REG_1		0x000118
+#define REG_2		0x000480
+#define REG_3		0x0004a0
+#define REG_4		0x000600
+#define REG_6		0x000800
+#define REG_7		0x000804
+#define REG_8		0x000820
+#define REG_9		0x000a04
+#define REG_10		0x018000
+#define REG_11		0x018004
+#define REG_12		0x01800c
+#define REG_13		0x018018
+#define REG_14  	0x01801c
+#define REG_15		0x200000
+#define REG_15b0	0x200000
+#define REG_16b1	0x200005
+#define REG_16b3	0x200007
+#define REG_21		0x200218
+#define REG_22		0x0005a0
+#define REG_23		0x0005c0
+#define REG_24		0x000808
+#define REG_25		0x000b00
+#define REG_26		0x200118
+#define REG_27		0x200308
+#define REG_32		0x21003c
+#define REG_33		0x210040
+#define REG_34		0x200008
+#define REG_35		0x018010
+#define REG_38		0x210020
+#define REG_39		0x210120
+#define REG_40		0x210130
+#define REG_42		0x210028
+#define REG_43		0x21002c
+#define REG_44		0x210030
+#define REG_45		0x210034
+
+#define READ_BYTE(fb, reg)		gsc_readb((fb)->info->fix.mmio_start + (reg))
+#define READ_WORD(fb, reg)		gsc_readl((fb)->info->fix.mmio_start + (reg))
+
+
+#ifndef DEBUG_STIFB_REGS
+# define  DEBUG_OFF()
+# define  DEBUG_ON()
+# define WRITE_BYTE(value, fb, reg)	gsc_writeb((value), (fb)->info->fix.mmio_start + (reg))
+# define WRITE_WORD(value, fb, reg)	gsc_writel((value), (fb)->info->fix.mmio_start + (reg))
+#else
+  static int debug_on = 1;
+# define  DEBUG_OFF() debug_on=0
+# define  DEBUG_ON()  debug_on=1
+# define WRITE_BYTE(value,fb,reg)	do { if (debug_on) \
+						printk(KERN_DEBUG "%30s: WRITE_BYTE(0x%06x) = 0x%02x (old=0x%02x)\n", \
+							__func__, reg, value, READ_BYTE(fb,reg)); 		  \
+					gsc_writeb((value), (fb)->info->fix.mmio_start + (reg)); } while (0)
+# define WRITE_WORD(value,fb,reg)	do { if (debug_on) \
+						printk(KERN_DEBUG "%30s: WRITE_WORD(0x%06x) = 0x%08x (old=0x%08x)\n", \
+							__func__, reg, value, READ_WORD(fb,reg)); 		  \
+					gsc_writel((value), (fb)->info->fix.mmio_start + (reg)); } while (0)
+#endif /* DEBUG_STIFB_REGS */
+
+
+#define ENABLE	1	/* for enabling/disabling screen */
+#define DISABLE 0
+
+#define NGLE_LOCK(fb_info)	do { } while (0)
+#define NGLE_UNLOCK(fb_info)	do { } while (0)
+
+static void
+SETUP_HW(struct stifb_info *fb)
+{
+	char stat;
+
+	do {
+		stat = READ_BYTE(fb, REG_15b0);
+		if (!stat)
+	    		stat = READ_BYTE(fb, REG_15b0);
+	} while (stat);
+}
+
+
+static void
+SETUP_FB(struct stifb_info *fb)
+{
+	unsigned int reg10_value = 0;
+
+	SETUP_HW(fb);
+	switch (fb->id)
+	{
+		case CRT_ID_VISUALIZE_EG:
+		case S9000_ID_ARTIST:
+		case S9000_ID_A1659A:
+			reg10_value = 0x13601000;
+			break;
+		case S9000_ID_A1439A:
+			if (fb->info->var.bits_per_pixel == 32)
+				reg10_value = 0xBBA0A000;
+			else
+				reg10_value = 0x13601000;
+			break;
+		case S9000_ID_HCRX:
+			if (fb->info->var.bits_per_pixel == 32)
+				reg10_value = 0xBBA0A000;
+			else
+				reg10_value = 0x13602000;
+			break;
+		case S9000_ID_TIMBER:
+		case CRX24_OVERLAY_PLANES:
+			reg10_value = 0x13602000;
+			break;
+	}
+	if (reg10_value)
+		WRITE_WORD(reg10_value, fb, REG_10);
+	WRITE_WORD(0x83000300, fb, REG_14);
+	SETUP_HW(fb);
+	WRITE_BYTE(1, fb, REG_16b1);
+}
+
+static void
+START_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb)
+{
+	SETUP_HW(fb);
+	WRITE_WORD(0xBBE0F000, fb, REG_10);
+	WRITE_WORD(0x03000300, fb, REG_14);
+	WRITE_WORD(~0, fb, REG_13);
+}
+
+static void
+WRITE_IMAGE_COLOR(struct stifb_info *fb, int index, int color)
+{
+	SETUP_HW(fb);
+	WRITE_WORD(((0x100+index)<<2), fb, REG_3);
+	WRITE_WORD(color, fb, REG_4);
+}
+
+static void
+FINISH_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb)
+{
+	WRITE_WORD(0x400, fb, REG_2);
+	if (fb->info->var.bits_per_pixel == 32) {
+		WRITE_WORD(0x83000100, fb, REG_1);
+	} else {
+		if (fb->id == S9000_ID_ARTIST || fb->id == CRT_ID_VISUALIZE_EG)
+			WRITE_WORD(0x80000100, fb, REG_26);
+		else
+			WRITE_WORD(0x80000100, fb, REG_1);
+	}
+	SETUP_FB(fb);
+}
+
+static void
+SETUP_RAMDAC(struct stifb_info *fb)
+{
+	SETUP_HW(fb);
+	WRITE_WORD(0x04000000, fb, 0x1020);
+	WRITE_WORD(0xff000000, fb, 0x1028);
+}
+
+static void
+CRX24_SETUP_RAMDAC(struct stifb_info *fb)
+{
+	SETUP_HW(fb);
+	WRITE_WORD(0x04000000, fb, 0x1000);
+	WRITE_WORD(0x02000000, fb, 0x1004);
+	WRITE_WORD(0xff000000, fb, 0x1008);
+	WRITE_WORD(0x05000000, fb, 0x1000);
+	WRITE_WORD(0x02000000, fb, 0x1004);
+	WRITE_WORD(0x03000000, fb, 0x1008);
+}
+
+#if 0
+static void
+HCRX_SETUP_RAMDAC(struct stifb_info *fb)
+{
+	WRITE_WORD(0xffffffff, fb, REG_32);
+}
+#endif
+
+static void
+CRX24_SET_OVLY_MASK(struct stifb_info *fb)
+{
+	SETUP_HW(fb);
+	WRITE_WORD(0x13a02000, fb, REG_11);
+	WRITE_WORD(0x03000300, fb, REG_14);
+	WRITE_WORD(0x000017f0, fb, REG_3);
+	WRITE_WORD(0xffffffff, fb, REG_13);
+	WRITE_WORD(0xffffffff, fb, REG_22);
+	WRITE_WORD(0x00000000, fb, REG_23);
+}
+
+static void
+ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
+{
+	unsigned int value = enable ? 0x43000000 : 0x03000000;
+        SETUP_HW(fb);
+        WRITE_WORD(0x06000000,	fb, 0x1030);
+        WRITE_WORD(value, 	fb, 0x1038);
+}
+
+static void
+CRX24_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
+{
+	unsigned int value = enable ? 0x10000000 : 0x30000000;
+	SETUP_HW(fb);
+	WRITE_WORD(0x01000000,	fb, 0x1000);
+	WRITE_WORD(0x02000000,	fb, 0x1004);
+	WRITE_WORD(value,	fb, 0x1008);
+}
+
+static void
+ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
+{
+	u32 DregsMiscVideo = REG_21;
+	u32 DregsMiscCtl = REG_27;
+
+	SETUP_HW(fb);
+	if (enable) {
+	  WRITE_WORD(READ_WORD(fb, DregsMiscVideo) | 0x0A000000, fb, DregsMiscVideo);
+	  WRITE_WORD(READ_WORD(fb, DregsMiscCtl)   | 0x00800000, fb, DregsMiscCtl);
+	} else {
+	  WRITE_WORD(READ_WORD(fb, DregsMiscVideo) & ~0x0A000000, fb, DregsMiscVideo);
+	  WRITE_WORD(READ_WORD(fb, DregsMiscCtl)   & ~0x00800000, fb, DregsMiscCtl);
+	}
+}
+
+#define GET_ROMTABLE_INDEX(fb) \
+	(READ_BYTE(fb, REG_16b3) - 1)
+
+#define HYPER_CONFIG_PLANES_24 0x00000100
+
+#define IS_24_DEVICE(fb) \
+	(fb->deviceSpecificConfig & HYPER_CONFIG_PLANES_24)
+
+#define IS_888_DEVICE(fb) \
+	(!(IS_24_DEVICE(fb)))
+
+#define GET_FIFO_SLOTS(fb, cnt, numslots)	\
+{	while (cnt < numslots) 			\
+		cnt = READ_WORD(fb, REG_34);	\
+	cnt -= numslots;			\
+}
+
+#define	    IndexedDcd	0	/* Pixel data is indexed (pseudo) color */
+#define	    Otc04	2	/* Pixels in each longword transfer (4) */
+#define	    Otc32	5	/* Pixels in each longword transfer (32) */
+#define	    Ots08	3	/* Each pixel is size (8)d transfer (1) */
+#define	    OtsIndirect	6	/* Each bit goes through FG/BG color(8) */
+#define	    AddrLong	5	/* FB address is Long aligned (pixel) */
+#define	    BINovly	0x2	/* 8 bit overlay */
+#define	    BINapp0I	0x0	/* Application Buffer 0, Indexed */
+#define	    BINapp1I	0x1	/* Application Buffer 1, Indexed */
+#define	    BINapp0F8	0xa	/* Application Buffer 0, Fractional 8-8-8 */
+#define	    BINattr	0xd	/* Attribute Bitmap */
+#define	    RopSrc 	0x3
+#define	    BitmapExtent08  3	/* Each write hits ( 8) bits in depth */
+#define	    BitmapExtent32  5	/* Each write hits (32) bits in depth */
+#define	    DataDynamic	    0	/* Data register reloaded by direct access */
+#define	    MaskDynamic	    1	/* Mask register reloaded by direct access */
+#define	    MaskOtc	    0	/* Mask contains Object Count valid bits */
+
+#define MaskAddrOffset(offset) (offset)
+#define StaticReg(en) (en)
+#define BGx(en) (en)
+#define FGx(en) (en)
+
+#define BAJustPoint(offset) (offset)
+#define BAIndexBase(base) (base)
+#define BA(F,C,S,A,J,B,I) \
+	(((F)<<31)|((C)<<27)|((S)<<24)|((A)<<21)|((J)<<16)|((B)<<12)|(I))
+
+#define IBOvals(R,M,X,S,D,L,B,F) \
+	(((R)<<8)|((M)<<16)|((X)<<24)|((S)<<29)|((D)<<28)|((L)<<31)|((B)<<1)|(F))
+
+#define NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb, val) \
+	WRITE_WORD(val, fb, REG_14)
+
+#define NGLE_QUICK_SET_DST_BM_ACCESS(fb, val) \
+	WRITE_WORD(val, fb, REG_11)
+
+#define NGLE_QUICK_SET_CTL_PLN_REG(fb, val) \
+	WRITE_WORD(val, fb, REG_12)
+
+#define NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, plnmsk32) \
+	WRITE_WORD(plnmsk32, fb, REG_13)
+
+#define NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, fg32) \
+	WRITE_WORD(fg32, fb, REG_35)
+
+#define NGLE_SET_TRANSFERDATA(fb, val) \
+	WRITE_WORD(val, fb, REG_8)
+
+#define NGLE_SET_DSTXY(fb, val) \
+	WRITE_WORD(val, fb, REG_6)
+
+#define NGLE_LONG_FB_ADDRESS(fbaddrbase, x, y) (		\
+	(u32) (fbaddrbase) +					\
+	    (	(unsigned int)  ( (y) << 13      ) |		\
+		(unsigned int)  ( (x) << 2       )	)	\
+	)
+
+#define NGLE_BINC_SET_DSTADDR(fb, addr) \
+	WRITE_WORD(addr, fb, REG_3)
+
+#define NGLE_BINC_SET_SRCADDR(fb, addr) \
+	WRITE_WORD(addr, fb, REG_2)
+
+#define NGLE_BINC_SET_DSTMASK(fb, mask) \
+	WRITE_WORD(mask, fb, REG_22)
+
+#define NGLE_BINC_WRITE32(fb, data32) \
+	WRITE_WORD(data32, fb, REG_23)
+
+#define START_COLORMAPLOAD(fb, cmapBltCtlData32) \
+	WRITE_WORD((cmapBltCtlData32), fb, REG_38)
+
+#define SET_LENXY_START_RECFILL(fb, lenxy) \
+	WRITE_WORD(lenxy, fb, REG_9)
+
+#define SETUP_COPYAREA(fb) \
+	WRITE_BYTE(0, fb, REG_16b1)
+
+static void
+HYPER_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
+{
+	u32 DregsHypMiscVideo = REG_33;
+	unsigned int value;
+	SETUP_HW(fb);
+	value = READ_WORD(fb, DregsHypMiscVideo);
+	if (enable)
+		value |= 0x0A000000;
+	else
+		value &= ~0x0A000000;
+	WRITE_WORD(value, fb, DregsHypMiscVideo);
+}
+
+
+/* BufferNumbers used by SETUP_ATTR_ACCESS() */
+#define BUFF0_CMAP0	0x00001e02
+#define BUFF1_CMAP0	0x02001e02
+#define BUFF1_CMAP3	0x0c001e02
+#define ARTIST_CMAP0	0x00000102
+#define HYPER_CMAP8	0x00000100
+#define HYPER_CMAP24	0x00000800
+
+static void
+SETUP_ATTR_ACCESS(struct stifb_info *fb, unsigned BufferNumber)
+{
+	SETUP_HW(fb);
+	WRITE_WORD(0x2EA0D000, fb, REG_11);
+	WRITE_WORD(0x23000302, fb, REG_14);
+	WRITE_WORD(BufferNumber, fb, REG_12);
+	WRITE_WORD(0xffffffff, fb, REG_8);
+}
+
+static void
+SET_ATTR_SIZE(struct stifb_info *fb, int width, int height)
+{
+	/* REG_6 seems to have special values when run on a
+	   RDI precisionbook parisc laptop (INTERNAL_EG_DX1024 or
+	   INTERNAL_EG_X1024).  The values are:
+		0x2f0: internal (LCD) & external display enabled
+		0x2a0: external display only
+		0x000: zero on standard artist graphic cards
+	*/
+	WRITE_WORD(0x00000000, fb, REG_6);
+	WRITE_WORD((width<<16) | height, fb, REG_9);
+	WRITE_WORD(0x05000000, fb, REG_6);
+	WRITE_WORD(0x00040001, fb, REG_9);
+}
+
+static void
+FINISH_ATTR_ACCESS(struct stifb_info *fb)
+{
+	SETUP_HW(fb);
+	WRITE_WORD(0x00000000, fb, REG_12);
+}
+
+static void
+elkSetupPlanes(struct stifb_info *fb)
+{
+	SETUP_RAMDAC(fb);
+	SETUP_FB(fb);
+}
+
+static void
+ngleSetupAttrPlanes(struct stifb_info *fb, int BufferNumber)
+{
+	SETUP_ATTR_ACCESS(fb, BufferNumber);
+	SET_ATTR_SIZE(fb, fb->info->var.xres, fb->info->var.yres);
+	FINISH_ATTR_ACCESS(fb);
+	SETUP_FB(fb);
+}
+
+
+static void
+rattlerSetupPlanes(struct stifb_info *fb)
+{
+	int saved_id, y;
+
+ 	/* Write RAMDAC pixel read mask register so all overlay
+	 * planes are display-enabled.  (CRX24 uses Bt462 pixel
+	 * read mask register for overlay planes, not image planes).
+	 */
+	CRX24_SETUP_RAMDAC(fb);
+
+	/* change fb->id temporarily to fool SETUP_FB() */
+	saved_id = fb->id;
+	fb->id = CRX24_OVERLAY_PLANES;
+	SETUP_FB(fb);
+	fb->id = saved_id;
+
+	for (y = 0; y < fb->info->var.yres; ++y)
+		fb_memset_io(fb->info->screen_base + y * fb->info->fix.line_length,
+			     0xff, fb->info->var.xres * fb->info->var.bits_per_pixel/8);
+
+	CRX24_SET_OVLY_MASK(fb);
+	SETUP_FB(fb);
+}
+
+
+#define HYPER_CMAP_TYPE				0
+#define NGLE_CMAP_INDEXED0_TYPE			0
+#define NGLE_CMAP_OVERLAY_TYPE			3
+
+/* typedef of LUT (Colormap) BLT Control Register */
+typedef union	/* Note assumption that fields are packed left-to-right */
+{	u32 all;
+	struct
+	{
+		unsigned enable              :  1;
+		unsigned waitBlank           :  1;
+		unsigned reserved1           :  4;
+		unsigned lutOffset           : 10;   /* Within destination LUT */
+		unsigned lutType             :  2;   /* Cursor, image, overlay */
+		unsigned reserved2           :  4;
+		unsigned length              : 10;
+	} fields;
+} NgleLutBltCtl;
+
+
+#if 0
+static NgleLutBltCtl
+setNgleLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
+{
+	NgleLutBltCtl lutBltCtl;
+
+	/* set enable, zero reserved fields */
+	lutBltCtl.all           = 0x80000000;
+	lutBltCtl.fields.length = length;
+
+	switch (fb->id)
+	{
+	case S9000_ID_A1439A:		/* CRX24 */
+		if (fb->var.bits_per_pixel == 8) {
+			lutBltCtl.fields.lutType = NGLE_CMAP_OVERLAY_TYPE;
+			lutBltCtl.fields.lutOffset = 0;
+		} else {
+			lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
+			lutBltCtl.fields.lutOffset = 0 * 256;
+		}
+		break;
+
+	case S9000_ID_ARTIST:
+		lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
+		lutBltCtl.fields.lutOffset = 0 * 256;
+		break;
+
+	default:
+		lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
+		lutBltCtl.fields.lutOffset = 0;
+		break;
+	}
+
+	/* Offset points to start of LUT.  Adjust for within LUT */
+	lutBltCtl.fields.lutOffset += offsetWithinLut;
+
+	return lutBltCtl;
+}
+#endif
+
+static NgleLutBltCtl
+setHyperLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
+{
+	NgleLutBltCtl lutBltCtl;
+
+	/* set enable, zero reserved fields */
+	lutBltCtl.all = 0x80000000;
+
+	lutBltCtl.fields.length = length;
+	lutBltCtl.fields.lutType = HYPER_CMAP_TYPE;
+
+	/* Expect lutIndex to be 0 or 1 for image cmaps, 2 or 3 for overlay cmaps */
+	if (fb->info->var.bits_per_pixel == 8)
+		lutBltCtl.fields.lutOffset = 2 * 256;
+	else
+		lutBltCtl.fields.lutOffset = 0 * 256;
+
+	/* Offset points to start of LUT.  Adjust for within LUT */
+	lutBltCtl.fields.lutOffset += offsetWithinLut;
+
+	return lutBltCtl;
+}
+
+
+static void hyperUndoITE(struct stifb_info *fb)
+{
+	int nFreeFifoSlots = 0;
+	u32 fbAddr;
+
+	NGLE_LOCK(fb);
+
+	GET_FIFO_SLOTS(fb, nFreeFifoSlots, 1);
+	WRITE_WORD(0xffffffff, fb, REG_32);
+
+	/* Write overlay transparency mask so only entry 255 is transparent */
+
+	/* Hardware setup for full-depth write to "magic" location */
+	GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7);
+	NGLE_QUICK_SET_DST_BM_ACCESS(fb,
+		BA(IndexedDcd, Otc04, Ots08, AddrLong,
+		BAJustPoint(0), BINovly, BAIndexBase(0)));
+	NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
+		IBOvals(RopSrc, MaskAddrOffset(0),
+		BitmapExtent08, StaticReg(0),
+		DataDynamic, MaskOtc, BGx(0), FGx(0)));
+
+	/* Now prepare to write to the "magic" location */
+	fbAddr = NGLE_LONG_FB_ADDRESS(0, 1532, 0);
+	NGLE_BINC_SET_DSTADDR(fb, fbAddr);
+	NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xffffff);
+	NGLE_BINC_SET_DSTMASK(fb, 0xffffffff);
+
+	/* Finally, write a zero to clear the mask */
+	NGLE_BINC_WRITE32(fb, 0);
+
+	NGLE_UNLOCK(fb);
+}
+
+static void
+ngleDepth8_ClearImagePlanes(struct stifb_info *fb)
+{
+	/* FIXME! */
+}
+
+static void
+ngleDepth24_ClearImagePlanes(struct stifb_info *fb)
+{
+	/* FIXME! */
+}
+
+static void
+ngleResetAttrPlanes(struct stifb_info *fb, unsigned int ctlPlaneReg)
+{
+	int nFreeFifoSlots = 0;
+	u32 packed_dst;
+	u32 packed_len;
+
+	NGLE_LOCK(fb);
+
+	GET_FIFO_SLOTS(fb, nFreeFifoSlots, 4);
+	NGLE_QUICK_SET_DST_BM_ACCESS(fb,
+				     BA(IndexedDcd, Otc32, OtsIndirect,
+					AddrLong, BAJustPoint(0),
+					BINattr, BAIndexBase(0)));
+	NGLE_QUICK_SET_CTL_PLN_REG(fb, ctlPlaneReg);
+	NGLE_SET_TRANSFERDATA(fb, 0xffffffff);
+
+	NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
+				       IBOvals(RopSrc, MaskAddrOffset(0),
+					       BitmapExtent08, StaticReg(1),
+					       DataDynamic, MaskOtc,
+					       BGx(0), FGx(0)));
+	packed_dst = 0;
+	packed_len = (fb->info->var.xres << 16) | fb->info->var.yres;
+	GET_FIFO_SLOTS(fb, nFreeFifoSlots, 2);
+	NGLE_SET_DSTXY(fb, packed_dst);
+	SET_LENXY_START_RECFILL(fb, packed_len);
+
+	/*
+	 * In order to work around an ELK hardware problem (Buffy doesn't
+	 * always flush it's buffers when writing to the attribute
+	 * planes), at least 4 pixels must be written to the attribute
+	 * planes starting at (X == 1280) and (Y != to the last Y written
+	 * by BIF):
+	 */
+
+	if (fb->id == S9000_ID_A1659A) {   /* ELK_DEVICE_ID */
+		/* It's safe to use scanline zero: */
+		packed_dst = (1280 << 16);
+		GET_FIFO_SLOTS(fb, nFreeFifoSlots, 2);
+		NGLE_SET_DSTXY(fb, packed_dst);
+		packed_len = (4 << 16) | 1;
+		SET_LENXY_START_RECFILL(fb, packed_len);
+	}   /* ELK Hardware Kludge */
+
+	/**** Finally, set the Control Plane Register back to zero: ****/
+	GET_FIFO_SLOTS(fb, nFreeFifoSlots, 1);
+	NGLE_QUICK_SET_CTL_PLN_REG(fb, 0);
+
+	NGLE_UNLOCK(fb);
+}
+
+static void
+ngleClearOverlayPlanes(struct stifb_info *fb, int mask, int data)
+{
+	int nFreeFifoSlots = 0;
+	u32 packed_dst;
+	u32 packed_len;
+
+	NGLE_LOCK(fb);
+
+	/* Hardware setup */
+	GET_FIFO_SLOTS(fb, nFreeFifoSlots, 8);
+	NGLE_QUICK_SET_DST_BM_ACCESS(fb,
+				     BA(IndexedDcd, Otc04, Ots08, AddrLong,
+					BAJustPoint(0), BINovly, BAIndexBase(0)));
+
+        NGLE_SET_TRANSFERDATA(fb, 0xffffffff);  /* Write foreground color */
+
+        NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, data);
+        NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, mask);
+
+        packed_dst = 0;
+	packed_len = (fb->info->var.xres << 16) | fb->info->var.yres;
+        NGLE_SET_DSTXY(fb, packed_dst);
+
+	/* Write zeroes to overlay planes */
+	NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
+				       IBOvals(RopSrc, MaskAddrOffset(0),
+					       BitmapExtent08, StaticReg(0),
+					       DataDynamic, MaskOtc, BGx(0), FGx(0)));
+
+        SET_LENXY_START_RECFILL(fb, packed_len);
+
+	NGLE_UNLOCK(fb);
+}
+
+static void
+hyperResetPlanes(struct stifb_info *fb, int enable)
+{
+	unsigned int controlPlaneReg;
+
+	NGLE_LOCK(fb);
+
+	if (IS_24_DEVICE(fb))
+		if (fb->info->var.bits_per_pixel == 32)
+			controlPlaneReg = 0x04000F00;
+		else
+			controlPlaneReg = 0x00000F00;   /* 0x00000800 should be enough, but lets clear all 4 bits */
+	else
+		controlPlaneReg = 0x00000F00; /* 0x00000100 should be enough, but lets clear all 4 bits */
+
+	switch (enable) {
+	case ENABLE:
+		/* clear screen */
+		if (IS_24_DEVICE(fb))
+			ngleDepth24_ClearImagePlanes(fb);
+		else
+			ngleDepth8_ClearImagePlanes(fb);
+
+		/* Paint attribute planes for default case.
+		 * On Hyperdrive, this means all windows using overlay cmap 0. */
+		ngleResetAttrPlanes(fb, controlPlaneReg);
+
+		/* clear overlay planes */
+	        ngleClearOverlayPlanes(fb, 0xff, 255);
+
+		/**************************************************
+		 ** Also need to counteract ITE settings
+		 **************************************************/
+		hyperUndoITE(fb);
+		break;
+
+	case DISABLE:
+		/* clear screen */
+		if (IS_24_DEVICE(fb))
+			ngleDepth24_ClearImagePlanes(fb);
+		else
+			ngleDepth8_ClearImagePlanes(fb);
+		ngleResetAttrPlanes(fb, controlPlaneReg);
+		ngleClearOverlayPlanes(fb, 0xff, 0);
+		break;
+
+	case -1:	/* RESET */
+		hyperUndoITE(fb);
+		ngleResetAttrPlanes(fb, controlPlaneReg);
+		break;
+    	}
+
+	NGLE_UNLOCK(fb);
+}
+
+/* Return pointer to in-memory structure holding ELK device-dependent ROM values. */
+
+static void
+ngleGetDeviceRomData(struct stifb_info *fb)
+{
+#if 0
+XXX: FIXME: !!!
+	int	*pBytePerLongDevDepData;/* data byte == LSB */
+	int 	*pRomTable;
+	NgleDevRomData	*pPackedDevRomData;
+	int	sizePackedDevRomData = sizeof(*pPackedDevRomData);
+	char	*pCard8;
+	int	i;
+	char	*mapOrigin = NULL;
+
+	int romTableIdx;
+
+	pPackedDevRomData = fb->ngle_rom;
+
+	SETUP_HW(fb);
+	if (fb->id == S9000_ID_ARTIST) {
+		pPackedDevRomData->cursor_pipeline_delay = 4;
+		pPackedDevRomData->video_interleaves     = 4;
+	} else {
+		/* Get pointer to unpacked byte/long data in ROM */
+		pBytePerLongDevDepData = fb->sti->regions[NGLEDEVDEPROM_CRT_REGION];
+
+		/* Tomcat supports several resolutions: 1280x1024, 1024x768, 640x480 */
+		if (fb->id == S9000_ID_TOMCAT)
+	{
+	    /*  jump to the correct ROM table  */
+	    GET_ROMTABLE_INDEX(romTableIdx);
+	    while  (romTableIdx > 0)
+	    {
+		pCard8 = (Card8 *) pPackedDevRomData;
+		pRomTable = pBytePerLongDevDepData;
+		/* Pack every fourth byte from ROM into structure */
+		for (i = 0; i < sizePackedDevRomData; i++)
+		{
+		    *pCard8++ = (Card8) (*pRomTable++);
+		}
+
+		pBytePerLongDevDepData = (Card32 *)
+			((Card8 *) pBytePerLongDevDepData +
+			       pPackedDevRomData->sizeof_ngle_data);
+
+		romTableIdx--;
+	    }
+	}
+
+	pCard8 = (Card8 *) pPackedDevRomData;
+
+	/* Pack every fourth byte from ROM into structure */
+	for (i = 0; i < sizePackedDevRomData; i++)
+	{
+	    *pCard8++ = (Card8) (*pBytePerLongDevDepData++);
+	}
+    }
+
+    SETUP_FB(fb);
+#endif
+}
+
+
+#define HYPERBOWL_MODE_FOR_8_OVER_88_LUT0_NO_TRANSPARENCIES	4
+#define HYPERBOWL_MODE01_8_24_LUT0_TRANSPARENT_LUT1_OPAQUE	8
+#define HYPERBOWL_MODE01_8_24_LUT0_OPAQUE_LUT1_OPAQUE		10
+#define HYPERBOWL_MODE2_8_24					15
+
+/* HCRX specific boot-time initialization */
+static void __init
+SETUP_HCRX(struct stifb_info *fb)
+{
+	int	hyperbowl;
+        int	nFreeFifoSlots = 0;
+
+	if (fb->id != S9000_ID_HCRX)
+		return;
+
+	/* Initialize Hyperbowl registers */
+	GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7);
+
+	if (IS_24_DEVICE(fb)) {
+		hyperbowl = (fb->info->var.bits_per_pixel == 32) ?
+			HYPERBOWL_MODE01_8_24_LUT0_TRANSPARENT_LUT1_OPAQUE :
+			HYPERBOWL_MODE01_8_24_LUT0_OPAQUE_LUT1_OPAQUE;
+
+		/* First write to Hyperbowl must happen twice (bug) */
+		WRITE_WORD(hyperbowl, fb, REG_40);
+		WRITE_WORD(hyperbowl, fb, REG_40);
+
+		WRITE_WORD(HYPERBOWL_MODE2_8_24, fb, REG_39);
+
+		WRITE_WORD(0x014c0148, fb, REG_42); /* Set lut 0 to be the direct color */
+		WRITE_WORD(0x404c4048, fb, REG_43);
+		WRITE_WORD(0x034c0348, fb, REG_44);
+		WRITE_WORD(0x444c4448, fb, REG_45);
+	} else {
+		hyperbowl = HYPERBOWL_MODE_FOR_8_OVER_88_LUT0_NO_TRANSPARENCIES;
+
+		/* First write to Hyperbowl must happen twice (bug) */
+		WRITE_WORD(hyperbowl, fb, REG_40);
+		WRITE_WORD(hyperbowl, fb, REG_40);
+
+		WRITE_WORD(0x00000000, fb, REG_42);
+		WRITE_WORD(0x00000000, fb, REG_43);
+		WRITE_WORD(0x00000000, fb, REG_44);
+		WRITE_WORD(0x444c4048, fb, REG_45);
+	}
+}
+
+
+/* ------------------- driver specific functions --------------------------- */
+
+static int
+stifb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct stifb_info *fb = info->par;
+
+	if (var->xres != fb->info->var.xres ||
+	    var->yres != fb->info->var.yres ||
+	    var->bits_per_pixel != fb->info->var.bits_per_pixel)
+		return -EINVAL;
+
+	var->xres_virtual = var->xres;
+	var->yres_virtual = var->yres;
+	var->xoffset = 0;
+	var->yoffset = 0;
+	var->grayscale = fb->info->var.grayscale;
+	var->red.length = fb->info->var.red.length;
+	var->green.length = fb->info->var.green.length;
+	var->blue.length = fb->info->var.blue.length;
+
+	return 0;
+}
+
+static int
+stifb_setcolreg(u_int regno, u_int red, u_int green,
+	      u_int blue, u_int transp, struct fb_info *info)
+{
+	struct stifb_info *fb = info->par;
+	u32 color;
+
+	if (regno >= NR_PALETTE)
+		return 1;
+
+	red   >>= 8;
+	green >>= 8;
+	blue  >>= 8;
+
+	DEBUG_OFF();
+
+	START_IMAGE_COLORMAP_ACCESS(fb);
+
+	if (unlikely(fb->info->var.grayscale)) {
+		/* gray = 0.30*R + 0.59*G + 0.11*B */
+		color = ((red * 77) +
+			 (green * 151) +
+			 (blue * 28)) >> 8;
+	} else {
+		color = ((red << 16) |
+			 (green << 8) |
+			 (blue));
+	}
+
+	if (fb->info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
+		struct fb_var_screeninfo *var = &fb->info->var;
+		if (regno < 16)
+			((u32 *)fb->info->pseudo_palette)[regno] =
+				regno << var->red.offset |
+				regno << var->green.offset |
+				regno << var->blue.offset;
+	}
+
+	WRITE_IMAGE_COLOR(fb, regno, color);
+
+	if (fb->id == S9000_ID_HCRX) {
+		NgleLutBltCtl lutBltCtl;
+
+		lutBltCtl = setHyperLutBltCtl(fb,
+				0,	/* Offset w/i LUT */
+				256);	/* Load entire LUT */
+		NGLE_BINC_SET_SRCADDR(fb,
+				NGLE_LONG_FB_ADDRESS(0, 0x100, 0));
+				/* 0x100 is same as used in WRITE_IMAGE_COLOR() */
+		START_COLORMAPLOAD(fb, lutBltCtl.all);
+		SETUP_FB(fb);
+	} else {
+		/* cleanup colormap hardware */
+		FINISH_IMAGE_COLORMAP_ACCESS(fb);
+	}
+
+	DEBUG_ON();
+
+	return 0;
+}
+
+static int
+stifb_blank(int blank_mode, struct fb_info *info)
+{
+	struct stifb_info *fb = info->par;
+	int enable = (blank_mode == 0) ? ENABLE : DISABLE;
+
+	switch (fb->id) {
+	case S9000_ID_A1439A:
+		CRX24_ENABLE_DISABLE_DISPLAY(fb, enable);
+		break;
+	case CRT_ID_VISUALIZE_EG:
+	case S9000_ID_ARTIST:
+		ARTIST_ENABLE_DISABLE_DISPLAY(fb, enable);
+		break;
+	case S9000_ID_HCRX:
+		HYPER_ENABLE_DISABLE_DISPLAY(fb, enable);
+		break;
+	case S9000_ID_A1659A:
+	case S9000_ID_TIMBER:
+	case CRX24_OVERLAY_PLANES:
+	default:
+		ENABLE_DISABLE_DISPLAY(fb, enable);
+		break;
+	}
+
+	SETUP_FB(fb);
+	return 0;
+}
+
+static void
+stifb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+	struct stifb_info *fb = info->par;
+
+	SETUP_COPYAREA(fb);
+
+	SETUP_HW(fb);
+	if (fb->info->var.bits_per_pixel == 32) {
+		WRITE_WORD(0xBBA0A000, fb, REG_10);
+
+		NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xffffffff);
+	} else {
+		WRITE_WORD(fb->id == S9000_ID_HCRX ? 0x13a02000 : 0x13a01000, fb, REG_10);
+
+		NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xff);
+	}
+
+	NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
+		IBOvals(RopSrc, MaskAddrOffset(0),
+		BitmapExtent08, StaticReg(1),
+		DataDynamic, MaskOtc, BGx(0), FGx(0)));
+
+	WRITE_WORD(((area->sx << 16) | area->sy), fb, REG_24);
+	WRITE_WORD(((area->width << 16) | area->height), fb, REG_7);
+	WRITE_WORD(((area->dx << 16) | area->dy), fb, REG_25);
+
+	SETUP_FB(fb);
+}
+
+#define ARTIST_VRAM_SIZE			0x000804
+#define ARTIST_VRAM_SRC				0x000808
+#define ARTIST_VRAM_SIZE_TRIGGER_WINFILL	0x000a04
+#define ARTIST_VRAM_DEST_TRIGGER_BLOCKMOVE	0x000b00
+#define ARTIST_SRC_BM_ACCESS			0x018008
+#define ARTIST_FGCOLOR				0x018010
+#define ARTIST_BGCOLOR				0x018014
+#define ARTIST_BITMAP_OP			0x01801c
+
+static void
+stifb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	struct stifb_info *fb = info->par;
+
+	if (rect->rop != ROP_COPY ||
+	    (fb->id == S9000_ID_HCRX && fb->info->var.bits_per_pixel == 32))
+		return cfb_fillrect(info, rect);
+
+	SETUP_HW(fb);
+
+	if (fb->info->var.bits_per_pixel == 32) {
+		WRITE_WORD(0xBBA0A000, fb, REG_10);
+
+		NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xffffffff);
+	} else {
+		WRITE_WORD(fb->id == S9000_ID_HCRX ? 0x13a02000 : 0x13a01000, fb, REG_10);
+
+		NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xff);
+	}
+
+	WRITE_WORD(0x03000300, fb, ARTIST_BITMAP_OP);
+	WRITE_WORD(0x2ea01000, fb, ARTIST_SRC_BM_ACCESS);
+	NGLE_QUICK_SET_DST_BM_ACCESS(fb, 0x2ea01000);
+	NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, rect->color);
+	WRITE_WORD(0, fb, ARTIST_BGCOLOR);
+
+	NGLE_SET_DSTXY(fb, (rect->dx << 16) | (rect->dy));
+	SET_LENXY_START_RECFILL(fb, (rect->width << 16) | (rect->height));
+
+	SETUP_FB(fb);
+}
+
+static void __init
+stifb_init_display(struct stifb_info *fb)
+{
+	int id = fb->id;
+
+	SETUP_FB(fb);
+
+	/* HCRX specific initialization */
+	SETUP_HCRX(fb);
+
+	/*
+	if (id == S9000_ID_HCRX)
+		hyperInitSprite(fb);
+	else
+		ngleInitSprite(fb);
+	*/
+
+	/* Initialize the image planes. */
+        switch (id) {
+	 case S9000_ID_HCRX:
+	    hyperResetPlanes(fb, ENABLE);
+	    break;
+	 case S9000_ID_A1439A:
+	    rattlerSetupPlanes(fb);
+	    break;
+	 case S9000_ID_A1659A:
+	 case S9000_ID_ARTIST:
+	 case CRT_ID_VISUALIZE_EG:
+	    elkSetupPlanes(fb);
+	    break;
+	}
+
+	/* Clear attribute planes on non HCRX devices. */
+        switch (id) {
+	 case S9000_ID_A1659A:
+	 case S9000_ID_A1439A:
+	    if (fb->info->var.bits_per_pixel == 32)
+		ngleSetupAttrPlanes(fb, BUFF1_CMAP3);
+	    else {
+		ngleSetupAttrPlanes(fb, BUFF1_CMAP0);
+	    }
+	    if (id == S9000_ID_A1439A)
+		ngleClearOverlayPlanes(fb, 0xff, 0);
+	    break;
+	 case S9000_ID_ARTIST:
+	 case CRT_ID_VISUALIZE_EG:
+	    if (fb->info->var.bits_per_pixel == 32)
+		ngleSetupAttrPlanes(fb, BUFF1_CMAP3);
+	    else {
+		ngleSetupAttrPlanes(fb, ARTIST_CMAP0);
+	    }
+	    break;
+	}
+	stifb_blank(0, fb->info);	/* 0=enable screen */
+
+	SETUP_FB(fb);
+}
+
+/* ------------ Interfaces to hardware functions ------------ */
+
+static const struct fb_ops stifb_ops = {
+	.owner		= THIS_MODULE,
+	__FB_DEFAULT_IOMEM_OPS_RDWR,
+	.fb_check_var	= stifb_check_var,
+	.fb_setcolreg	= stifb_setcolreg,
+	.fb_blank	= stifb_blank,
+	.fb_fillrect	= stifb_fillrect,
+	.fb_copyarea	= stifb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	__FB_DEFAULT_IOMEM_OPS_MMAP,
+};
+
+
+/*
+ *  Initialization
+ */
+
+static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
+{
+	struct fb_fix_screeninfo *fix;
+	struct fb_var_screeninfo *var;
+	struct stifb_info *fb;
+	struct fb_info *info;
+	unsigned long sti_rom_address;
+	char modestr[32];
+	char *dev_name;
+	int bpp, xres, yres;
+
+	info = framebuffer_alloc(sizeof(*fb), sti->dev);
+	if (!info)
+		return -ENOMEM;
+	fb = info->par;
+	fb->info = info;
+
+	/* set struct to a known state */
+	fix = &info->fix;
+	var = &info->var;
+
+	fb->sti = sti;
+	dev_name = sti->sti_data->inq_outptr.dev_name;
+	/* store upper 32bits of the graphics id */
+	fb->id = fb->sti->graphics_id[0];
+
+	/* only supported cards are allowed */
+	switch (fb->id) {
+	case CRT_ID_VISUALIZE_EG:
+		/* Visualize cards can run either in "double buffer" or
+ 		  "standard" mode. Depending on the mode, the card reports
+		  a different device name, e.g. "INTERNAL_EG_DX1024" in double
+		  buffer mode and "INTERNAL_EG_X1024" in standard mode.
+		  Since this driver only supports standard mode, we check
+		  if the device name contains the string "DX" and tell the
+		  user how to reconfigure the card. */
+		if (strstr(dev_name, "DX")) {
+		   printk(KERN_WARNING
+"WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n"
+"WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n",
+			dev_name);
+		   goto out_err0;
+		}
+		fallthrough;
+	case S9000_ID_ARTIST:
+	case S9000_ID_HCRX:
+	case S9000_ID_TIMBER:
+	case S9000_ID_A1659A:
+	case S9000_ID_A1439A:
+		break;
+	default:
+		printk(KERN_WARNING "stifb: '%s' (id: 0x%08x) not supported.\n",
+			dev_name, fb->id);
+		goto out_err0;
+	}
+
+	/* default to 8 bpp on most graphic chips */
+	bpp = 8;
+	xres = sti_onscreen_x(fb->sti);
+	yres = sti_onscreen_y(fb->sti);
+
+	ngleGetDeviceRomData(fb);
+
+	/* get (virtual) io region base addr */
+	fix->mmio_start = REGION_BASE(fb,2);
+	fix->mmio_len   = 0x400000;
+
+       	/* Reject any device not in the NGLE family */
+	switch (fb->id) {
+	case S9000_ID_A1659A:	/* CRX/A1659A */
+		break;
+	case S9000_ID_ELM:	/* GRX, grayscale but else same as A1659A */
+		var->grayscale = 1;
+		fb->id = S9000_ID_A1659A;
+		break;
+	case S9000_ID_TIMBER:	/* HP9000/710 Any (may be a grayscale device) */
+		if (strstr(dev_name, "GRAYSCALE") ||
+		    strstr(dev_name, "Grayscale") ||
+		    strstr(dev_name, "grayscale"))
+			var->grayscale = 1;
+		break;
+	case S9000_ID_TOMCAT:	/* Dual CRX, behaves else like a CRX */
+		/* FIXME: TomCat supports two heads:
+		 * fb.iobase = REGION_BASE(fb_info,3);
+		 * fb.screen_base = ioremap(REGION_BASE(fb_info,2),xxx);
+		 * for now we only support the left one ! */
+		xres = fb->ngle_rom.x_size_visible;
+		yres = fb->ngle_rom.y_size_visible;
+		fb->id = S9000_ID_A1659A;
+		break;
+	case S9000_ID_A1439A:	/* CRX24/A1439A */
+		bpp = 32;
+		break;
+	case S9000_ID_HCRX:	/* Hyperdrive/HCRX */
+		memset(&fb->ngle_rom, 0, sizeof(fb->ngle_rom));
+		if ((fb->sti->regions_phys[0] & 0xfc000000) ==
+		    (fb->sti->regions_phys[2] & 0xfc000000))
+			sti_rom_address = F_EXTEND(fb->sti->regions_phys[0]);
+		else
+			sti_rom_address = F_EXTEND(fb->sti->regions_phys[1]);
+
+		fb->deviceSpecificConfig = gsc_readl(sti_rom_address);
+		if (IS_24_DEVICE(fb)) {
+			if (bpp_pref == 8 || bpp_pref == 32)
+				bpp = bpp_pref;
+			else
+				bpp = 32;
+		} else
+			bpp = 8;
+		READ_WORD(fb, REG_15);
+		SETUP_HW(fb);
+		break;
+	case CRT_ID_VISUALIZE_EG:
+	case S9000_ID_ARTIST:	/* Artist */
+		break;
+	default:
+#ifdef FALLBACK_TO_1BPP
+		printk(KERN_WARNING
+			"stifb: Unsupported graphics card (id=0x%08x) "
+				"- now trying 1bpp mode instead\n",
+			fb->id);
+		bpp = 1;	/* default to 1 bpp */
+		break;
+#else
+		printk(KERN_WARNING
+			"stifb: Unsupported graphics card (id=0x%08x) "
+				"- skipping.\n",
+			fb->id);
+		goto out_err0;
+#endif
+	}
+
+
+	/* get framebuffer physical and virtual base addr & len (64bit ready) */
+	fix->smem_start = F_EXTEND(fb->sti->regions_phys[1]);
+	fix->smem_len = fb->sti->regions[1].region_desc.length * 4096;
+
+	fix->line_length = (fb->sti->glob_cfg->total_x * bpp) / 8;
+	if (!fix->line_length)
+		fix->line_length = 2048; /* default */
+
+	/* limit fbsize to max visible screen size */
+	if (fix->smem_len > yres*fix->line_length)
+		fix->smem_len = ALIGN(yres*fix->line_length, 4*1024*1024);
+
+	fix->accel = FB_ACCEL_NONE;
+
+	switch (bpp) {
+	    case 1:
+		fix->type = FB_TYPE_PLANES;	/* well, sort of */
+		fix->visual = FB_VISUAL_MONO10;
+		var->red.length = var->green.length = var->blue.length = 1;
+		break;
+	    case 8:
+		fix->type = FB_TYPE_PACKED_PIXELS;
+		fix->visual = FB_VISUAL_PSEUDOCOLOR;
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	    case 32:
+		fix->type = FB_TYPE_PACKED_PIXELS;
+		fix->visual = FB_VISUAL_DIRECTCOLOR;
+		var->red.length = var->green.length = var->blue.length = var->transp.length = 8;
+		var->blue.offset = 0;
+		var->green.offset = 8;
+		var->red.offset = 16;
+		var->transp.offset = 24;
+		break;
+	    default:
+		break;
+	}
+
+	var->xres = var->xres_virtual = xres;
+	var->yres = var->yres_virtual = yres;
+	var->bits_per_pixel = bpp;
+
+	strcpy(fix->id, "stifb");
+	info->fbops = &stifb_ops;
+	info->screen_base = ioremap(REGION_BASE(fb,1), fix->smem_len);
+	if (!info->screen_base) {
+		printk(KERN_ERR "stifb: failed to map memory\n");
+		goto out_err0;
+	}
+	info->screen_size = fix->smem_len;
+	info->flags = FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
+	info->pseudo_palette = &fb->pseudo_palette;
+
+	scnprintf(modestr, sizeof(modestr), "%dx%d-%d", xres, yres, bpp);
+	fb_find_mode(&info->var, info, modestr, NULL, 0, NULL, bpp);
+
+	/* This has to be done !!! */
+	if (fb_alloc_cmap(&info->cmap, NR_PALETTE, 0))
+		goto out_err1;
+	stifb_init_display(fb);
+
+	if (!request_mem_region(fix->smem_start, fix->smem_len, "stifb fb")) {
+		printk(KERN_ERR "stifb: cannot reserve fb region 0x%04lx-0x%04lx\n",
+				fix->smem_start, fix->smem_start+fix->smem_len);
+		goto out_err2;
+	}
+
+	if (!request_mem_region(fix->mmio_start, fix->mmio_len, "stifb mmio")) {
+		printk(KERN_ERR "stifb: cannot reserve sti mmio region 0x%04lx-0x%04lx\n",
+				fix->mmio_start, fix->mmio_start+fix->mmio_len);
+		goto out_err3;
+	}
+
+	/* save for primary gfx device detection & unregister_framebuffer() */
+	if (register_framebuffer(fb->info) < 0)
+		goto out_err4;
+
+	fb_info(fb->info, "%s %dx%d-%d frame buffer device, %s, id: %04x, mmio: 0x%04lx\n",
+		fix->id,
+		var->xres,
+		var->yres,
+		var->bits_per_pixel,
+		dev_name,
+		fb->id,
+		fix->mmio_start);
+
+	dev_set_drvdata(sti->dev, info);
+
+	return 0;
+
+
+out_err4:
+	release_mem_region(fix->mmio_start, fix->mmio_len);
+out_err3:
+	release_mem_region(fix->smem_start, fix->smem_len);
+out_err2:
+	fb_dealloc_cmap(&info->cmap);
+out_err1:
+	iounmap(info->screen_base);
+out_err0:
+	framebuffer_release(info);
+	return -ENXIO;
+}
+
+static int stifb_disabled __initdata;
+
+int __init
+stifb_setup(char *options);
+
+static int __init stifb_init(void)
+{
+	struct sti_struct *sti;
+	struct sti_struct *def_sti;
+	int i;
+
+#ifndef MODULE
+	char *option = NULL;
+
+	if (fb_get_options("stifb", &option))
+		return -ENODEV;
+	stifb_setup(option);
+#endif
+	if (stifb_disabled) {
+		printk(KERN_INFO "stifb: disabled by \"stifb=off\" kernel parameter\n");
+		return -ENXIO;
+	}
+
+	def_sti = sti_get_rom(0);
+	if (def_sti) {
+		for (i = 1; i <= MAX_STI_ROMS; i++) {
+			sti = sti_get_rom(i);
+			if (!sti)
+				break;
+			if (sti == def_sti) {
+				stifb_init_fb(sti, stifb_bpp_pref[i - 1]);
+				break;
+			}
+		}
+	}
+
+	for (i = 1; i <= MAX_STI_ROMS; i++) {
+		sti = sti_get_rom(i);
+		if (!sti)
+			break;
+		if (sti == def_sti)
+			continue;
+		stifb_init_fb(sti, stifb_bpp_pref[i - 1]);
+	}
+	return 0;
+}
+
+/*
+ *  Cleanup
+ */
+
+static void __exit
+stifb_cleanup(void)
+{
+	struct sti_struct *sti;
+	int i;
+
+	for (i = 1; i <= MAX_STI_ROMS; i++) {
+		sti = sti_get_rom(i);
+		if (!sti)
+			break;
+		if (sti->dev) {
+			struct fb_info *info = dev_get_drvdata(sti->dev);
+
+			if (!info)
+				continue;
+			unregister_framebuffer(info);
+			release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+		        release_mem_region(info->fix.smem_start, info->fix.smem_len);
+				if (info->screen_base)
+					iounmap(info->screen_base);
+		        fb_dealloc_cmap(&info->cmap);
+		        framebuffer_release(info);
+			dev_set_drvdata(sti->dev, NULL);
+		}
+	}
+}
+
+int __init
+stifb_setup(char *options)
+{
+	int i;
+
+	if (!options || !*options)
+		return 1;
+
+	if (strncmp(options, "off", 3) == 0) {
+		stifb_disabled = 1;
+		options += 3;
+	}
+
+	if (strncmp(options, "bpp", 3) == 0) {
+		options += 3;
+		for (i = 0; i < MAX_STI_ROMS; i++) {
+			if (*options++ != ':')
+				break;
+			stifb_bpp_pref[i] = simple_strtoul(options, &options, 10);
+		}
+	}
+	return 1;
+}
+
+__setup("stifb=", stifb_setup);
+
+module_init(stifb_init);
+module_exit(stifb_cleanup);
+
+MODULE_AUTHOR("Helge Deller <deller@gmx.de>, Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
+MODULE_DESCRIPTION("Framebuffer driver for HP's NGLE series graphics cards in HP PARISC machines");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.3.1