From 34ff636f322c6d5e4f0a52338fa63a7dff09a495 Mon Sep 17 00:00:00 2001
From: Joel Fernandes <joelagnelf@nvidia.com>
Date: Sat, 18 Jul 2026 13:15:36 -0400
Subject: scftorture: Count single_rpc offline failures in statistics output

scf_torture_stats_print() aggregates each invoker thread's counters
into a local scf_statistics structure before printing, but the
n_single_rpc_ofl field is missing from the aggregation loop.  As a
result, the "single_rpc_ofl" value printed in the statistics line is
always zero, even when smp_call_function_single() invocations for the
RPC test have failed due to offline CPUs and been counted by the
invoker threads.

Add the missing accumulation so that the printed value reflects the
actual counts.

Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
 drivers/video/fbdev/savage/Makefile          |   10 +
 drivers/video/fbdev/savage/savagefb-i2c.c    |  241 +++
 drivers/video/fbdev/savage/savagefb.h        |  406 ++++
 drivers/video/fbdev/savage/savagefb_accel.c  |  137 ++
 drivers/video/fbdev/savage/savagefb_driver.c | 2583 ++++++++++++++++++++++++++
 5 files changed, 3377 insertions(+)
 create mode 100644 drivers/video/fbdev/savage/Makefile
 create mode 100644 drivers/video/fbdev/savage/savagefb-i2c.c
 create mode 100644 drivers/video/fbdev/savage/savagefb.h
 create mode 100644 drivers/video/fbdev/savage/savagefb_accel.c
 create mode 100644 drivers/video/fbdev/savage/savagefb_driver.c

(limited to 'drivers/video/fbdev/savage')

diff --git a/drivers/video/fbdev/savage/Makefile b/drivers/video/fbdev/savage/Makefile
new file mode 100644
index 000000000..3f6fcced1
--- /dev/null
+++ b/drivers/video/fbdev/savage/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the S3 Savage framebuffer driver
+#
+
+obj-$(CONFIG_FB_SAVAGE)			+= savagefb.o
+
+savagefb-y				+= savagefb_driver.o
+savagefb-$(CONFIG_FB_SAVAGE_I2C)	+= savagefb-i2c.o
+savagefb-$(CONFIG_FB_SAVAGE_ACCEL)	+= savagefb_accel.o
diff --git a/drivers/video/fbdev/savage/savagefb-i2c.c b/drivers/video/fbdev/savage/savagefb-i2c.c
new file mode 100644
index 000000000..80fa87e2a
--- /dev/null
+++ b/drivers/video/fbdev/savage/savagefb-i2c.c
@@ -0,0 +1,241 @@
+/*
+ * linux/drivers/video/savage/savagefb-i2c.c - S3 Savage DDC2
+ *
+ * Copyright 2004 Antonino A. Daplas <adaplas @pol.net>
+ *
+ * Based partly on rivafb-i2c.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
+#include <linux/pci.h>
+#include <linux/fb.h>
+
+#include <asm/io.h>
+#include "savagefb.h"
+
+#define SAVAGE_DDC 	0x50
+
+#define VGA_CR_IX	0x3d4
+#define VGA_CR_DATA	0x3d5
+
+#define CR_SERIAL1	0xa0	/* I2C serial communications interface */
+#define MM_SERIAL1	0xff20
+#define CR_SERIAL2	0xb1	/* DDC2 monitor communications interface */
+
+/* based on vt8365 documentation */
+#define PROSAVAGE_I2C_ENAB	0x10
+#define PROSAVAGE_I2C_SCL_OUT	0x01
+#define PROSAVAGE_I2C_SDA_OUT	0x02
+#define PROSAVAGE_I2C_SCL_IN	0x04
+#define PROSAVAGE_I2C_SDA_IN	0x08
+
+#define SAVAGE4_I2C_ENAB	0x00000020
+#define SAVAGE4_I2C_SCL_OUT	0x00000001
+#define SAVAGE4_I2C_SDA_OUT	0x00000002
+#define SAVAGE4_I2C_SCL_IN	0x00000008
+#define SAVAGE4_I2C_SDA_IN	0x00000010
+
+static void savage4_gpio_setscl(void *data, int val)
+{
+	struct savagefb_i2c_chan *chan = data;
+	unsigned int r;
+
+	r = readl(chan->ioaddr + chan->reg);
+	if(val)
+		r |= SAVAGE4_I2C_SCL_OUT;
+	else
+		r &= ~SAVAGE4_I2C_SCL_OUT;
+	writel(r, chan->ioaddr + chan->reg);
+	readl(chan->ioaddr + chan->reg);	/* flush posted write */
+}
+
+static void savage4_gpio_setsda(void *data, int val)
+{
+	struct savagefb_i2c_chan *chan = data;
+
+	unsigned int r;
+	r = readl(chan->ioaddr + chan->reg);
+	if(val)
+		r |= SAVAGE4_I2C_SDA_OUT;
+	else
+		r &= ~SAVAGE4_I2C_SDA_OUT;
+	writel(r, chan->ioaddr + chan->reg);
+	readl(chan->ioaddr + chan->reg);	/* flush posted write */
+}
+
+static int savage4_gpio_getscl(void *data)
+{
+	struct savagefb_i2c_chan *chan = data;
+
+	return (0 != (readl(chan->ioaddr + chan->reg) & SAVAGE4_I2C_SCL_IN));
+}
+
+static int savage4_gpio_getsda(void *data)
+{
+	struct savagefb_i2c_chan *chan = data;
+
+	return (0 != (readl(chan->ioaddr + chan->reg) & SAVAGE4_I2C_SDA_IN));
+}
+
+static void prosavage_gpio_setscl(void* data, int val)
+{
+	struct savagefb_i2c_chan *chan = data;
+	u32			  r;
+
+	r = VGArCR(chan->reg, chan->par);
+	r |= PROSAVAGE_I2C_ENAB;
+	if (val) {
+		r |= PROSAVAGE_I2C_SCL_OUT;
+	} else {
+		r &= ~PROSAVAGE_I2C_SCL_OUT;
+	}
+
+	VGAwCR(chan->reg, r, chan->par);
+}
+
+static void prosavage_gpio_setsda(void* data, int val)
+{
+	struct savagefb_i2c_chan *chan = data;
+	unsigned int r;
+
+	r = VGArCR(chan->reg, chan->par);
+	r |= PROSAVAGE_I2C_ENAB;
+	if (val) {
+		r |= PROSAVAGE_I2C_SDA_OUT;
+	} else {
+		r &= ~PROSAVAGE_I2C_SDA_OUT;
+	}
+
+	VGAwCR(chan->reg, r, chan->par);
+}
+
+static int prosavage_gpio_getscl(void* data)
+{
+	struct savagefb_i2c_chan *chan = data;
+
+	return (VGArCR(chan->reg, chan->par) & PROSAVAGE_I2C_SCL_IN) ? 1 : 0;
+}
+
+static int prosavage_gpio_getsda(void* data)
+{
+	struct savagefb_i2c_chan *chan = data;
+
+	return (VGArCR(chan->reg, chan->par) & PROSAVAGE_I2C_SDA_IN) ? 1 : 0;
+}
+
+static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan,
+				const char *name)
+{
+	int rc = 0;
+
+	if (chan->par) {
+		strcpy(chan->adapter.name, name);
+		chan->adapter.owner		= THIS_MODULE;
+		chan->adapter.algo_data		= &chan->algo;
+		chan->adapter.dev.parent	= &chan->par->pcidev->dev;
+		chan->algo.udelay		= 10;
+		chan->algo.timeout		= 20;
+		chan->algo.data 		= chan;
+
+		i2c_set_adapdata(&chan->adapter, chan);
+
+		/* Raise SCL and SDA */
+		chan->algo.setsda(chan, 1);
+		chan->algo.setscl(chan, 1);
+		udelay(20);
+
+		rc = i2c_bit_add_bus(&chan->adapter);
+
+		if (rc == 0)
+			dev_dbg(&chan->par->pcidev->dev,
+				"I2C bus %s registered.\n", name);
+		else
+			dev_warn(&chan->par->pcidev->dev,
+				 "Failed to register I2C bus %s.\n", name);
+	}
+
+	return rc;
+}
+
+void savagefb_create_i2c_busses(struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+	par->chan.par	= par;
+
+	switch (par->chip) {
+	case S3_PROSAVAGE:
+	case S3_PROSAVAGEDDR:
+	case S3_TWISTER:
+		par->chan.reg         = CR_SERIAL2;
+		par->chan.ioaddr      = par->mmio.vbase;
+		par->chan.algo.setsda = prosavage_gpio_setsda;
+		par->chan.algo.setscl = prosavage_gpio_setscl;
+		par->chan.algo.getsda = prosavage_gpio_getsda;
+		par->chan.algo.getscl = prosavage_gpio_getscl;
+		break;
+	case S3_SAVAGE4:
+		par->chan.reg = CR_SERIAL1;
+		if (par->pcidev->revision > 1 && !(VGArCR(0xa6, par) & 0x40))
+			par->chan.reg = CR_SERIAL2;
+		par->chan.ioaddr      = par->mmio.vbase;
+		par->chan.algo.setsda = prosavage_gpio_setsda;
+		par->chan.algo.setscl = prosavage_gpio_setscl;
+		par->chan.algo.getsda = prosavage_gpio_getsda;
+		par->chan.algo.getscl = prosavage_gpio_getscl;
+		break;
+	case S3_SAVAGE2000:
+		par->chan.reg         = MM_SERIAL1;
+		par->chan.ioaddr      = par->mmio.vbase;
+		par->chan.algo.setsda = savage4_gpio_setsda;
+		par->chan.algo.setscl = savage4_gpio_setscl;
+		par->chan.algo.getsda = savage4_gpio_getsda;
+		par->chan.algo.getscl = savage4_gpio_getscl;
+		break;
+	default:
+		par->chan.par = NULL;
+	}
+
+	savage_setup_i2c_bus(&par->chan, "SAVAGE DDC2");
+}
+
+void savagefb_delete_i2c_busses(struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+
+	if (par->chan.par)
+		i2c_del_adapter(&par->chan.adapter);
+
+	par->chan.par = NULL;
+}
+
+int savagefb_probe_i2c_connector(struct fb_info *info, u8 **out_edid)
+{
+	struct savagefb_par *par = info->par;
+	u8 *edid;
+
+	if (par->chan.par)
+		edid = fb_ddc_read(&par->chan.adapter);
+	else
+		edid = NULL;
+
+	if (!edid) {
+		/* try to get from firmware */
+		const u8 *e = fb_firmware_edid(info->device);
+
+		if (e)
+			edid = kmemdup(e, EDID_LENGTH, GFP_KERNEL);
+	}
+
+	*out_edid = edid;
+
+	return (edid) ? 0 : 1;
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/savage/savagefb.h b/drivers/video/fbdev/savage/savagefb.h
new file mode 100644
index 000000000..b6b8cc208
--- /dev/null
+++ b/drivers/video/fbdev/savage/savagefb.h
@@ -0,0 +1,406 @@
+/*
+ * linux/drivers/video/savagefb.h -- S3 Savage Framebuffer Driver
+ *
+ * Copyright (c) 2001  Denis Oliver Kropp <dok@convergence.de>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+
+#ifndef __SAVAGEFB_H__
+#define __SAVAGEFB_H__
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/mutex.h>
+#include <video/vga.h>
+#include "../edid.h"
+
+#ifdef SAVAGEFB_DEBUG
+# define DBG(x)		printk (KERN_DEBUG "savagefb: %s\n", (x));
+#else
+# define DBG(x)		no_printk(x)
+# define SavagePrintRegs(...)
+#endif
+
+
+#define PCI_CHIP_SAVAGE4      0x8a22
+#define PCI_CHIP_SAVAGE3D     0x8a20
+#define PCI_CHIP_SAVAGE3D_MV  0x8a21
+#define PCI_CHIP_SAVAGE2000   0x9102
+#define PCI_CHIP_SAVAGE_MX_MV 0x8c10
+#define PCI_CHIP_SAVAGE_MX    0x8c11
+#define PCI_CHIP_SAVAGE_IX_MV 0x8c12
+#define PCI_CHIP_SAVAGE_IX    0x8c13
+#define PCI_CHIP_PROSAVAGE_PM 0x8a25
+#define PCI_CHIP_PROSAVAGE_KM 0x8a26
+#define PCI_CHIP_S3TWISTER_P  0x8d01
+#define PCI_CHIP_S3TWISTER_K  0x8d02
+#define PCI_CHIP_PROSAVAGE_DDR          0x8d03
+#define PCI_CHIP_PROSAVAGE_DDRK         0x8d04
+#define PCI_CHIP_SUPSAV_MX128		0x8c22
+#define PCI_CHIP_SUPSAV_MX64		0x8c24
+#define PCI_CHIP_SUPSAV_MX64C		0x8c26
+#define PCI_CHIP_SUPSAV_IX128SDR	0x8c2a
+#define PCI_CHIP_SUPSAV_IX128DDR	0x8c2b
+#define PCI_CHIP_SUPSAV_IX64SDR		0x8c2c
+#define PCI_CHIP_SUPSAV_IX64DDR		0x8c2d
+#define PCI_CHIP_SUPSAV_IXCSDR		0x8c2e
+#define PCI_CHIP_SUPSAV_IXCDDR		0x8c2f
+
+
+#define S3_SAVAGE_SERIES(chip)    ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE2000))
+
+#define S3_SAVAGE3D_SERIES(chip)  ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE_MX))
+
+#define S3_SAVAGE4_SERIES(chip)   ((chip>=S3_SAVAGE4) && (chip<=S3_PROSAVAGEDDR))
+
+#define S3_SAVAGE_MOBILE_SERIES(chip)  ((chip==S3_SAVAGE_MX) || (chip==S3_SUPERSAVAGE))
+
+#define S3_MOBILE_TWISTER_SERIES(chip) ((chip==S3_TWISTER) || (chip==S3_PROSAVAGEDDR))
+
+/* Chip tags.  These are used to group the adapters into
+ * related families.
+ */
+
+typedef enum {
+  S3_UNKNOWN = 0,
+  S3_SAVAGE3D,
+  S3_SAVAGE_MX,
+  S3_SAVAGE4,
+  S3_PROSAVAGE,
+  S3_TWISTER,
+  S3_PROSAVAGEDDR,
+  S3_SUPERSAVAGE,
+  S3_SAVAGE2000,
+  S3_LAST
+} savage_chipset;
+
+#define BIOS_BSIZE		     1024
+#define BIOS_BASE		     0xc0000
+
+#define SAVAGE_NEWMMIO_REGBASE_S3    0x1000000  /* 16MB */
+#define SAVAGE_NEWMMIO_REGBASE_S4    0x0000000
+#define SAVAGE_NEWMMIO_REGSIZE	     0x0080000  /* 512kb */
+#define SAVAGE_NEWMMIO_VGABASE	     0x8000
+
+#define BASE_FREQ		     14318
+#define HALF_BASE_FREQ               7159
+
+#define FIFO_CONTROL_REG	     0x8200
+#define MIU_CONTROL_REG		     0x8204
+#define STREAMS_TIMEOUT_REG	     0x8208
+#define MISC_TIMEOUT_REG	     0x820c
+
+#define MONO_PAT_0                   0xa4e8
+#define MONO_PAT_1                   0xa4ec
+
+#define MAXFIFO                      0x7f00
+
+#define BCI_CMD_NOP                  0x40000000
+#define BCI_CMD_SETREG               0x96000000
+#define BCI_CMD_RECT                 0x48000000
+#define BCI_CMD_RECT_XP              0x01000000
+#define BCI_CMD_RECT_YP              0x02000000
+#define BCI_CMD_SEND_COLOR           0x00008000
+#define BCI_CMD_DEST_GBD             0x00000000
+#define BCI_CMD_SRC_GBD              0x00000020
+#define BCI_CMD_SRC_SOLID            0x00000000
+#define BCI_CMD_SRC_MONO             0x00000060
+#define BCI_CMD_CLIP_NEW             0x00006000
+#define BCI_CMD_CLIP_LR              0x00004000
+
+#define BCI_CLIP_LR(l, r)            ((((r) << 16) | (l)) & 0x0FFF0FFF)
+#define BCI_CLIP_TL(t, l)            ((((t) << 16) | (l)) & 0x0FFF0FFF)
+#define BCI_CLIP_BR(b, r)            ((((b) << 16) | (r)) & 0x0FFF0FFF)
+#define BCI_W_H(w, h)                (((h) << 16) | ((w) & 0xFFF))
+#define BCI_X_Y(x, y)                (((y) << 16) | ((x) & 0xFFF))
+
+#define BCI_GBD1                     0xE0
+#define BCI_GBD2                     0xE1
+
+#define BCI_BUFFER_OFFSET            0x10000
+#define BCI_SIZE                     0x4000
+
+#define BCI_SEND(dw)                 writel(dw, par->bci_base + par->bci_ptr++)
+
+#define BCI_CMD_GET_ROP(cmd)         (((cmd) >> 16) & 0xFF)
+#define BCI_CMD_SET_ROP(cmd, rop)    ((cmd) |= ((rop & 0xFF) << 16))
+#define BCI_CMD_SEND_COLOR           0x00008000
+
+#define DISP_CRT     1
+#define DISP_LCD     2
+#define DISP_DFP     3
+
+struct xtimings {
+	unsigned int Clock;
+	unsigned int HDisplay;
+	unsigned int HSyncStart;
+	unsigned int HSyncEnd;
+	unsigned int HTotal;
+	unsigned int HAdjusted;
+	unsigned int VDisplay;
+	unsigned int VSyncStart;
+	unsigned int VSyncEnd;
+	unsigned int VTotal;
+	unsigned int sync;
+	int	       dblscan;
+	int	       interlaced;
+};
+
+struct savage_reg {
+	unsigned char MiscOutReg;     /* Misc */
+	unsigned char CRTC[25];       /* Crtc Controller */
+	unsigned char Sequencer[5];   /* Video Sequencer */
+	unsigned char Graphics[9];    /* Video Graphics */
+	unsigned char Attribute[21];  /* Video Attribute */
+
+	unsigned int mode, refresh;
+	unsigned char SR08, SR0E, SR0F;
+	unsigned char SR10, SR11, SR12, SR13, SR15, SR18, SR29, SR30;
+	unsigned char SR54[8];
+	unsigned char Clock;
+	unsigned char CR31, CR32, CR33, CR34, CR36, CR3A, CR3B, CR3C;
+	unsigned char CR40, CR41, CR42, CR43, CR45;
+	unsigned char CR50, CR51, CR53, CR55, CR58, CR5B, CR5D, CR5E;
+	unsigned char CR60, CR63, CR65, CR66, CR67, CR68, CR69, CR6D, CR6F;
+	unsigned char CR86, CR88;
+	unsigned char CR90, CR91, CRB0;
+	unsigned int  STREAMS[22];	/* yuck, streams regs */
+	unsigned int  MMPR0, MMPR1, MMPR2, MMPR3;
+};
+/* --------------------------------------------------------------------- */
+
+#define NR_PALETTE	256
+
+
+struct savagefb_par;
+
+struct savagefb_i2c_chan {
+	struct savagefb_par *par;
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo;
+	volatile u8 __iomem *ioaddr;
+	u32   reg;
+};
+
+struct savagefb_par {
+	struct pci_dev *pcidev;
+	savage_chipset  chip;
+	struct savagefb_i2c_chan chan;
+	struct savage_reg state;
+	struct savage_reg save;
+	struct savage_reg initial;
+	struct vgastate vgastate;
+	struct mutex open_lock;
+	u32 pseudo_palette[16];
+	u32 open_count;
+	int paletteEnabled;
+	int pm_state;
+	int display_type;
+	int dvi;
+	int crtonly;
+	int dacSpeedBpp;
+	int maxClock;
+	int minClock;
+	int numClocks;
+	int clock[4];
+	int MCLK, REFCLK, LCDclk;
+	struct {
+		void   __iomem *vbase;
+		u32    pbase;
+		u32    len;
+		int    wc_cookie;
+	} video;
+
+	struct {
+		void  __iomem *vbase;
+		u32           pbase;
+		u32           len;
+	} mmio;
+
+	volatile u32  __iomem *bci_base;
+	unsigned int  bci_ptr;
+	u32           cob_offset;
+	u32           cob_size;
+	int           cob_index;
+
+	void (*SavageWaitIdle) (struct savagefb_par *par);
+	void (*SavageWaitFifo) (struct savagefb_par *par, int space);
+
+	int HorizScaleFactor;
+
+	/* Panels size */
+	int SavagePanelWidth;
+	int SavagePanelHeight;
+
+	struct {
+		u16 red, green, blue, transp;
+	} palette[NR_PALETTE];
+
+	int depth;
+	int vwidth;
+};
+
+#define BCI_BD_BW_DISABLE            0x10000000
+#define BCI_BD_SET_BPP(bd, bpp)      ((bd) |= (((bpp) & 0xFF) << 16))
+#define BCI_BD_SET_STRIDE(bd, st)    ((bd) |= ((st) & 0xFFFF))
+
+
+/* IO functions */
+static inline u8 savage_in8(u32 addr, struct savagefb_par *par)
+{
+	return readb(par->mmio.vbase + addr);
+}
+
+static inline u16 savage_in16(u32 addr, struct savagefb_par *par)
+{
+	return readw(par->mmio.vbase + addr);
+}
+
+static inline u32 savage_in32(u32 addr, struct savagefb_par *par)
+{
+	return readl(par->mmio.vbase + addr);
+}
+
+static inline void savage_out8(u32 addr, u8 val, struct savagefb_par *par)
+{
+	writeb(val, par->mmio.vbase + addr);
+}
+
+static inline void savage_out16(u32 addr, u16 val, struct savagefb_par *par)
+{
+	writew(val, par->mmio.vbase + addr);
+}
+
+static inline void savage_out32(u32 addr, u32 val, struct savagefb_par *par)
+{
+	writel(val, par->mmio.vbase + addr);
+}
+
+static inline u8 vga_in8(int addr, struct savagefb_par *par)
+{
+	return savage_in8(0x8000 + addr, par);
+}
+
+static inline u16 vga_in16(int addr, struct savagefb_par *par)
+{
+	return savage_in16(0x8000 + addr, par);
+}
+
+static inline u8 vga_in32(int addr, struct savagefb_par *par)
+{
+	return savage_in32(0x8000 + addr, par);
+}
+
+static inline void vga_out8(int addr, u8 val, struct savagefb_par *par)
+{
+	savage_out8(0x8000 + addr, val, par);
+}
+
+static inline void vga_out16(int addr, u16 val, struct savagefb_par *par)
+{
+	savage_out16(0x8000 + addr, val, par);
+}
+
+static inline void vga_out32(int addr, u32 val, struct savagefb_par *par)
+{
+	savage_out32(0x8000 + addr, val, par);
+}
+
+static inline u8 VGArCR (u8 index, struct savagefb_par *par)
+{
+	vga_out8(0x3d4, index,  par);
+	return vga_in8(0x3d5, par);
+}
+
+static inline u8 VGArGR (u8 index, struct savagefb_par *par)
+{
+	vga_out8(0x3ce, index, par);
+	return vga_in8(0x3cf, par);
+}
+
+static inline u8 VGArSEQ (u8 index, struct savagefb_par *par)
+{
+	vga_out8(0x3c4, index, par);
+	return vga_in8(0x3c5, par);
+}
+
+static inline void VGAwCR(u8 index, u8 val, struct savagefb_par *par)
+{
+	vga_out8(0x3d4, index, par);
+	vga_out8(0x3d5, val, par);
+}
+
+static inline void VGAwGR(u8 index, u8 val, struct savagefb_par *par)
+{
+	vga_out8(0x3ce, index, par);
+	vga_out8(0x3cf, val, par);
+}
+
+static inline void VGAwSEQ(u8 index, u8 val, struct savagefb_par *par)
+{
+	vga_out8(0x3c4, index, par);
+	vga_out8 (0x3c5, val, par);
+}
+
+static inline void VGAenablePalette(struct savagefb_par *par)
+{
+	vga_in8(0x3da, par);
+	vga_out8(0x3c0, 0x00, par);
+	par->paletteEnabled = 1;
+}
+
+static inline void VGAdisablePalette(struct savagefb_par *par)
+{
+	vga_in8(0x3da, par);
+	vga_out8(0x3c0, 0x20, par);
+	par->paletteEnabled = 0;
+}
+
+static inline void VGAwATTR(u8 index, u8 value, struct savagefb_par *par)
+{
+	if (par->paletteEnabled)
+		index &= ~0x20;
+	else
+		index |= 0x20;
+
+	vga_in8(0x3da, par);
+	vga_out8(0x3c0, index, par);
+	vga_out8 (0x3c0, value, par);
+}
+
+static inline void VGAwMISC(u8 value, struct savagefb_par *par)
+{
+	vga_out8(0x3c2, value, par);
+}
+
+#ifndef CONFIG_FB_SAVAGE_ACCEL
+#define savagefb_set_clip(x)
+#endif
+
+static inline void VerticalRetraceWait(struct savagefb_par *par)
+{
+	vga_out8(0x3d4, 0x17, par);
+	if (vga_in8(0x3d5, par) & 0x80) {
+		while ((vga_in8(0x3da, par) & 0x08) == 0x08);
+		while ((vga_in8(0x3da, par) & 0x08) == 0x00);
+	}
+}
+
+extern int savagefb_probe_i2c_connector(struct fb_info *info,
+					u8 **out_edid);
+extern void savagefb_create_i2c_busses(struct fb_info *info);
+extern void savagefb_delete_i2c_busses(struct fb_info *info);
+extern int  savagefb_sync(struct fb_info *info);
+extern void savagefb_copyarea(struct fb_info *info,
+			      const struct fb_copyarea *region);
+extern void savagefb_fillrect(struct fb_info *info,
+			      const struct fb_fillrect *rect);
+extern void savagefb_imageblit(struct fb_info *info,
+			       const struct fb_image *image);
+
+
+#endif /* __SAVAGEFB_H__ */
diff --git a/drivers/video/fbdev/savage/savagefb_accel.c b/drivers/video/fbdev/savage/savagefb_accel.c
new file mode 100644
index 000000000..bfefa6234
--- /dev/null
+++ b/drivers/video/fbdev/savage/savagefb_accel.c
@@ -0,0 +1,137 @@
+/*-*- linux-c -*-
+ *  linux/drivers/video/savage/savage_accel.c -- Hardware Acceleration
+ *
+ *      Copyright (C) 2004 Antonino Daplas<adaplas@pol.net>
+ *      All Rights Reserved
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/fb.h>
+#include <linux/module.h>
+
+#include "savagefb.h"
+
+static u32 savagefb_rop[] = {
+	0xCC, /* ROP_COPY */
+	0x5A  /* ROP_XOR  */
+};
+
+int savagefb_sync(struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+
+	par->SavageWaitIdle(par);
+	return 0;
+}
+
+void savagefb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
+{
+	struct savagefb_par *par = info->par;
+	int sx = region->sx, dx = region->dx;
+	int sy = region->sy, dy = region->dy;
+	int cmd;
+
+	if (!region->width || !region->height)
+		return;
+	par->bci_ptr = 0;
+	cmd = BCI_CMD_RECT | BCI_CMD_DEST_GBD | BCI_CMD_SRC_GBD;
+	BCI_CMD_SET_ROP(cmd, savagefb_rop[0]);
+
+	if (dx <= sx) {
+		cmd |= BCI_CMD_RECT_XP;
+	} else {
+		sx += region->width - 1;
+		dx += region->width - 1;
+	}
+
+	if (dy <= sy) {
+		cmd |= BCI_CMD_RECT_YP;
+	} else {
+		sy += region->height - 1;
+		dy += region->height - 1;
+	}
+
+	par->SavageWaitFifo(par,4);
+	BCI_SEND(cmd);
+	BCI_SEND(BCI_X_Y(sx, sy));
+	BCI_SEND(BCI_X_Y(dx, dy));
+	BCI_SEND(BCI_W_H(region->width, region->height));
+}
+
+void savagefb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	struct savagefb_par *par = info->par;
+	int cmd, color;
+
+	if (!rect->width || !rect->height)
+		return;
+
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
+		color = rect->color;
+	else
+		color = ((u32 *)info->pseudo_palette)[rect->color];
+
+	cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP |
+	      BCI_CMD_DEST_GBD | BCI_CMD_SRC_SOLID |
+	      BCI_CMD_SEND_COLOR;
+
+	par->bci_ptr = 0;
+	BCI_CMD_SET_ROP(cmd, savagefb_rop[rect->rop]);
+
+	par->SavageWaitFifo(par,4);
+	BCI_SEND(cmd);
+	BCI_SEND(color);
+	BCI_SEND( BCI_X_Y(rect->dx, rect->dy) );
+	BCI_SEND( BCI_W_H(rect->width, rect->height) );
+}
+
+void savagefb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct savagefb_par *par = info->par;
+	int fg, bg, size, i, width;
+	int cmd;
+	u32 *src = (u32 *) image->data;
+
+	if (!image->width || !image->height)
+		return;
+
+	if (image->depth != 1) {
+		cfb_imageblit(info, image);
+		return;
+	}
+
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
+		fg = image->fg_color;
+		bg = image->bg_color;
+	} else {
+		fg = ((u32 *)info->pseudo_palette)[image->fg_color];
+		bg = ((u32 *)info->pseudo_palette)[image->bg_color];
+	}
+
+	cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP |
+	      BCI_CMD_CLIP_LR | BCI_CMD_DEST_GBD | BCI_CMD_SRC_MONO |
+	      BCI_CMD_SEND_COLOR;
+
+	par->bci_ptr = 0;
+	BCI_CMD_SET_ROP(cmd, savagefb_rop[0]);
+
+	width = (image->width + 31) & ~31;
+	size = (width * image->height)/8;
+	size >>= 2;
+
+	par->SavageWaitFifo(par, size + 5);
+	BCI_SEND(cmd);
+	BCI_SEND(BCI_CLIP_LR(image->dx, image->dx + image->width - 1));
+	BCI_SEND(fg);
+	BCI_SEND(bg);
+	BCI_SEND(BCI_X_Y(image->dx, image->dy));
+	BCI_SEND(BCI_W_H(width, image->height));
+	for (i = 0; i < size; i++)
+		BCI_SEND(src[i]);
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c
new file mode 100644
index 000000000..7789196d2
--- /dev/null
+++ b/drivers/video/fbdev/savage/savagefb_driver.c
@@ -0,0 +1,2583 @@
+/*
+ * linux/drivers/video/savagefb.c -- S3 Savage Framebuffer Driver
+ *
+ * Copyright (c) 2001-2002  Denis Oliver Kropp <dok@directfb.org>
+ *                          Sven Neumann <neo@directfb.org>
+ *
+ *
+ * Card specific code is based on XFree86's savage driver.
+ * Framebuffer framework code is based on code of cyber2000fb and tdfxfb.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * 0.4.0 (neo)
+ *  - hardware accelerated clear and move
+ *
+ * 0.3.2 (dok)
+ *  - wait for vertical retrace before writing to cr67
+ *    at the beginning of savagefb_set_par
+ *  - use synchronization registers cr23 and cr26
+ *
+ * 0.3.1 (dok)
+ *  - reset 3D engine
+ *  - don't return alpha bits for 32bit format
+ *
+ * 0.3.0 (dok)
+ *  - added WaitIdle functions for all Savage types
+ *  - do WaitIdle before mode switching
+ *  - code cleanup
+ *
+ * 0.2.0 (dok)
+ *  - first working version
+ *
+ *
+ * TODO
+ * - clock validations in decode_var
+ *
+ * BUGS
+ * - white margin on bootup
+ *
+ */
+
+#include <linux/aperture.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "savagefb.h"
+
+
+#define SAVAGEFB_VERSION "0.4.0_2.6"
+
+/* --------------------------------------------------------------------- */
+
+
+static char *mode_option = NULL;
+
+#ifdef MODULE
+
+MODULE_AUTHOR("(c) 2001-2002  Denis Oliver Kropp <dok@directfb.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FBDev driver for S3 Savage PCI/AGP Chips");
+
+#endif
+
+
+/* --------------------------------------------------------------------- */
+
+static void vgaHWSeqReset(struct savagefb_par *par, int start)
+{
+	if (start)
+		VGAwSEQ(0x00, 0x01, par);	/* Synchronous Reset */
+	else
+		VGAwSEQ(0x00, 0x03, par);	/* End Reset */
+}
+
+static void vgaHWProtect(struct savagefb_par *par, int on)
+{
+	unsigned char tmp;
+
+	if (on) {
+		/*
+		 * Turn off screen and disable sequencer.
+		 */
+		tmp = VGArSEQ(0x01, par);
+
+		vgaHWSeqReset(par, 1);	        /* start synchronous reset */
+		VGAwSEQ(0x01, tmp | 0x20, par);/* disable the display */
+
+		VGAenablePalette(par);
+	} else {
+		/*
+		 * Reenable sequencer, then turn on screen.
+		 */
+
+		tmp = VGArSEQ(0x01, par);
+
+		VGAwSEQ(0x01, tmp & ~0x20, par);/* reenable display */
+		vgaHWSeqReset(par, 0);	        /* clear synchronous reset */
+
+		VGAdisablePalette(par);
+	}
+}
+
+static void vgaHWRestore(struct savagefb_par  *par, struct savage_reg *reg)
+{
+	int i;
+
+	VGAwMISC(reg->MiscOutReg, par);
+
+	for (i = 1; i < 5; i++)
+		VGAwSEQ(i, reg->Sequencer[i], par);
+
+	/* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 or
+	   CRTC[17] */
+	VGAwCR(17, reg->CRTC[17] & ~0x80, par);
+
+	for (i = 0; i < 25; i++)
+		VGAwCR(i, reg->CRTC[i], par);
+
+	for (i = 0; i < 9; i++)
+		VGAwGR(i, reg->Graphics[i], par);
+
+	VGAenablePalette(par);
+
+	for (i = 0; i < 21; i++)
+		VGAwATTR(i, reg->Attribute[i], par);
+
+	VGAdisablePalette(par);
+}
+
+static void vgaHWInit(struct fb_var_screeninfo *var,
+		      struct savagefb_par            *par,
+		      struct xtimings                *timings,
+		      struct savage_reg              *reg)
+{
+	reg->MiscOutReg = 0x23;
+
+	if (!(timings->sync & FB_SYNC_HOR_HIGH_ACT))
+		reg->MiscOutReg |= 0x40;
+
+	if (!(timings->sync & FB_SYNC_VERT_HIGH_ACT))
+		reg->MiscOutReg |= 0x80;
+
+	/*
+	 * Time Sequencer
+	 */
+	reg->Sequencer[0x00] = 0x00;
+	reg->Sequencer[0x01] = 0x01;
+	reg->Sequencer[0x02] = 0x0F;
+	reg->Sequencer[0x03] = 0x00;          /* Font select */
+	reg->Sequencer[0x04] = 0x0E;          /* Misc */
+
+	/*
+	 * CRTC Controller
+	 */
+	reg->CRTC[0x00] = (timings->HTotal >> 3) - 5;
+	reg->CRTC[0x01] = (timings->HDisplay >> 3) - 1;
+	reg->CRTC[0x02] = (timings->HSyncStart >> 3) - 1;
+	reg->CRTC[0x03] = (((timings->HSyncEnd >> 3)  - 1) & 0x1f) | 0x80;
+	reg->CRTC[0x04] = (timings->HSyncStart >> 3);
+	reg->CRTC[0x05] = ((((timings->HSyncEnd >> 3) - 1) & 0x20) << 2) |
+		(((timings->HSyncEnd >> 3)) & 0x1f);
+	reg->CRTC[0x06] = (timings->VTotal - 2) & 0xFF;
+	reg->CRTC[0x07] = (((timings->VTotal - 2) & 0x100) >> 8) |
+		(((timings->VDisplay - 1) & 0x100) >> 7) |
+		((timings->VSyncStart & 0x100) >> 6) |
+		(((timings->VSyncStart - 1) & 0x100) >> 5) |
+		0x10 |
+		(((timings->VTotal - 2) & 0x200) >> 4) |
+		(((timings->VDisplay - 1) & 0x200) >> 3) |
+		((timings->VSyncStart & 0x200) >> 2);
+	reg->CRTC[0x08] = 0x00;
+	reg->CRTC[0x09] = (((timings->VSyncStart - 1) & 0x200) >> 4) | 0x40;
+
+	if (timings->dblscan)
+		reg->CRTC[0x09] |= 0x80;
+
+	reg->CRTC[0x0a] = 0x00;
+	reg->CRTC[0x0b] = 0x00;
+	reg->CRTC[0x0c] = 0x00;
+	reg->CRTC[0x0d] = 0x00;
+	reg->CRTC[0x0e] = 0x00;
+	reg->CRTC[0x0f] = 0x00;
+	reg->CRTC[0x10] = timings->VSyncStart & 0xff;
+	reg->CRTC[0x11] = (timings->VSyncEnd & 0x0f) | 0x20;
+	reg->CRTC[0x12] = (timings->VDisplay - 1) & 0xff;
+	reg->CRTC[0x13] = var->xres_virtual >> 4;
+	reg->CRTC[0x14] = 0x00;
+	reg->CRTC[0x15] = (timings->VSyncStart - 1) & 0xff;
+	reg->CRTC[0x16] = (timings->VSyncEnd - 1) & 0xff;
+	reg->CRTC[0x17] = 0xc3;
+	reg->CRTC[0x18] = 0xff;
+
+	/*
+	 * are these unnecessary?
+	 * vgaHWHBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN|KGA_ENABLE_ON_ZERO);
+	 * vgaHWVBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN|KGA_ENABLE_ON_ZERO);
+	 */
+
+	/*
+	 * Graphics Display Controller
+	 */
+	reg->Graphics[0x00] = 0x00;
+	reg->Graphics[0x01] = 0x00;
+	reg->Graphics[0x02] = 0x00;
+	reg->Graphics[0x03] = 0x00;
+	reg->Graphics[0x04] = 0x00;
+	reg->Graphics[0x05] = 0x40;
+	reg->Graphics[0x06] = 0x05;   /* only map 64k VGA memory !!!! */
+	reg->Graphics[0x07] = 0x0F;
+	reg->Graphics[0x08] = 0xFF;
+
+
+	reg->Attribute[0x00]  = 0x00; /* standard colormap translation */
+	reg->Attribute[0x01]  = 0x01;
+	reg->Attribute[0x02]  = 0x02;
+	reg->Attribute[0x03]  = 0x03;
+	reg->Attribute[0x04]  = 0x04;
+	reg->Attribute[0x05]  = 0x05;
+	reg->Attribute[0x06]  = 0x06;
+	reg->Attribute[0x07]  = 0x07;
+	reg->Attribute[0x08]  = 0x08;
+	reg->Attribute[0x09]  = 0x09;
+	reg->Attribute[0x0a] = 0x0A;
+	reg->Attribute[0x0b] = 0x0B;
+	reg->Attribute[0x0c] = 0x0C;
+	reg->Attribute[0x0d] = 0x0D;
+	reg->Attribute[0x0e] = 0x0E;
+	reg->Attribute[0x0f] = 0x0F;
+	reg->Attribute[0x10] = 0x41;
+	reg->Attribute[0x11] = 0xFF;
+	reg->Attribute[0x12] = 0x0F;
+	reg->Attribute[0x13] = 0x00;
+	reg->Attribute[0x14] = 0x00;
+}
+
+/* -------------------- Hardware specific routines ------------------------- */
+
+/*
+ * Hardware Acceleration for SavageFB
+ */
+
+/* Wait for fifo space */
+static void
+savage3D_waitfifo(struct savagefb_par *par, int space)
+{
+	int slots = MAXFIFO - space;
+
+	while ((savage_in32(0x48C00, par) & 0x0000ffff) > slots);
+}
+
+static void
+savage4_waitfifo(struct savagefb_par *par, int space)
+{
+	int slots = MAXFIFO - space;
+
+	while ((savage_in32(0x48C60, par) & 0x001fffff) > slots);
+}
+
+static void
+savage2000_waitfifo(struct savagefb_par *par, int space)
+{
+	int slots = MAXFIFO - space;
+
+	while ((savage_in32(0x48C60, par) & 0x0000ffff) > slots);
+}
+
+/* Wait for idle accelerator */
+static void
+savage3D_waitidle(struct savagefb_par *par)
+{
+	while ((savage_in32(0x48C00, par) & 0x0008ffff) != 0x80000);
+}
+
+static void
+savage4_waitidle(struct savagefb_par *par)
+{
+	while ((savage_in32(0x48C60, par) & 0x00a00000) != 0x00a00000);
+}
+
+static void
+savage2000_waitidle(struct savagefb_par *par)
+{
+	while ((savage_in32(0x48C60, par) & 0x009fffff));
+}
+
+#ifdef CONFIG_FB_SAVAGE_ACCEL
+static void
+SavageSetup2DEngine(struct savagefb_par  *par)
+{
+	unsigned long GlobalBitmapDescriptor;
+
+	GlobalBitmapDescriptor = 1 | 8 | BCI_BD_BW_DISABLE;
+	BCI_BD_SET_BPP(GlobalBitmapDescriptor, par->depth);
+	BCI_BD_SET_STRIDE(GlobalBitmapDescriptor, par->vwidth);
+
+	switch(par->chip) {
+	case S3_SAVAGE3D:
+	case S3_SAVAGE_MX:
+		/* Disable BCI */
+		savage_out32(0x48C18, savage_in32(0x48C18, par) & 0x3FF0, par);
+		/* Setup BCI command overflow buffer */
+		savage_out32(0x48C14,
+			     (par->cob_offset >> 11) | (par->cob_index << 29),
+			     par);
+		/* Program shadow status update. */
+		savage_out32(0x48C10, 0x78207220, par);
+		savage_out32(0x48C0C, 0, par);
+		/* Enable BCI and command overflow buffer */
+		savage_out32(0x48C18, savage_in32(0x48C18, par) | 0x0C, par);
+		break;
+	case S3_SAVAGE4:
+	case S3_TWISTER:
+	case S3_PROSAVAGE:
+	case S3_PROSAVAGEDDR:
+	case S3_SUPERSAVAGE:
+		/* Disable BCI */
+		savage_out32(0x48C18, savage_in32(0x48C18, par) & 0x3FF0, par);
+		/* Program shadow status update */
+		savage_out32(0x48C10, 0x00700040, par);
+		savage_out32(0x48C0C, 0, par);
+		/* Enable BCI without the COB */
+		savage_out32(0x48C18, savage_in32(0x48C18, par) | 0x08, par);
+		break;
+	case S3_SAVAGE2000:
+		/* Disable BCI */
+		savage_out32(0x48C18, 0, par);
+		/* Setup BCI command overflow buffer */
+		savage_out32(0x48C18,
+			     (par->cob_offset >> 7) | (par->cob_index),
+			     par);
+		/* Disable shadow status update */
+		savage_out32(0x48A30, 0, par);
+		/* Enable BCI and command overflow buffer */
+		savage_out32(0x48C18, savage_in32(0x48C18, par) | 0x00280000,
+			     par);
+		break;
+	    default:
+		break;
+	}
+	/* Turn on 16-bit register access. */
+	vga_out8(0x3d4, 0x31, par);
+	vga_out8(0x3d5, 0x0c, par);
+
+	/* Set stride to use GBD. */
+	vga_out8(0x3d4, 0x50, par);
+	vga_out8(0x3d5, vga_in8(0x3d5, par) | 0xC1, par);
+
+	/* Enable 2D engine. */
+	vga_out8(0x3d4, 0x40, par);
+	vga_out8(0x3d5, 0x01, par);
+
+	savage_out32(MONO_PAT_0, ~0, par);
+	savage_out32(MONO_PAT_1, ~0, par);
+
+	/* Setup plane masks */
+	savage_out32(0x8128, ~0, par); /* enable all write planes */
+	savage_out32(0x812C, ~0, par); /* enable all read planes */
+	savage_out16(0x8134, 0x27, par);
+	savage_out16(0x8136, 0x07, par);
+
+	/* Now set the GBD */
+	par->bci_ptr = 0;
+	par->SavageWaitFifo(par, 4);
+
+	BCI_SEND(BCI_CMD_SETREG | (1 << 16) | BCI_GBD1);
+	BCI_SEND(0);
+	BCI_SEND(BCI_CMD_SETREG | (1 << 16) | BCI_GBD2);
+	BCI_SEND(GlobalBitmapDescriptor);
+
+	/*
+	 * I don't know why, sending this twice fixes the initial black screen,
+	 * prevents X from crashing at least in Toshiba laptops with SavageIX.
+	 * --Tony
+	 */
+	par->bci_ptr = 0;
+	par->SavageWaitFifo(par, 4);
+
+	BCI_SEND(BCI_CMD_SETREG | (1 << 16) | BCI_GBD1);
+	BCI_SEND(0);
+	BCI_SEND(BCI_CMD_SETREG | (1 << 16) | BCI_GBD2);
+	BCI_SEND(GlobalBitmapDescriptor);
+}
+
+static void savagefb_set_clip(struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+	int cmd;
+
+	cmd = BCI_CMD_NOP | BCI_CMD_CLIP_NEW;
+	par->bci_ptr = 0;
+	par->SavageWaitFifo(par,3);
+	BCI_SEND(cmd);
+	BCI_SEND(BCI_CLIP_TL(0, 0));
+	BCI_SEND(BCI_CLIP_BR(0xfff, 0xfff));
+}
+#else
+static void SavageSetup2DEngine(struct savagefb_par  *par) {}
+
+#endif
+
+static void SavageCalcClock(long freq, int min_m, int min_n1, int max_n1,
+			    int min_n2, int max_n2, long freq_min,
+			    long freq_max, unsigned int *mdiv,
+			    unsigned int *ndiv, unsigned int *r)
+{
+	long diff, best_diff;
+	unsigned int m;
+	unsigned char n1, n2, best_n1=16+2, best_n2=2, best_m=125+2;
+
+	if (freq < freq_min / (1 << max_n2)) {
+		printk(KERN_ERR "invalid frequency %ld Khz\n", freq);
+		freq = freq_min / (1 << max_n2);
+	}
+	if (freq > freq_max / (1 << min_n2)) {
+		printk(KERN_ERR "invalid frequency %ld Khz\n", freq);
+		freq = freq_max / (1 << min_n2);
+	}
+
+	/* work out suitable timings */
+	best_diff = freq;
+
+	for (n2=min_n2; n2<=max_n2; n2++) {
+		for (n1=min_n1+2; n1<=max_n1+2; n1++) {
+			m = (freq * n1 * (1 << n2) + HALF_BASE_FREQ) /
+				BASE_FREQ;
+			if (m < min_m+2 || m > 127+2)
+				continue;
+			if ((m * BASE_FREQ >= freq_min * n1) &&
+			    (m * BASE_FREQ <= freq_max * n1)) {
+				diff = freq * (1 << n2) * n1 - BASE_FREQ * m;
+				if (diff < 0)
+					diff = -diff;
+				if (diff < best_diff) {
+					best_diff = diff;
+					best_m = m;
+					best_n1 = n1;
+					best_n2 = n2;
+				}
+			}
+		}
+	}
+
+	*ndiv = best_n1 - 2;
+	*r = best_n2;
+	*mdiv = best_m - 2;
+}
+
+static int common_calc_clock(long freq, int min_m, int min_n1, int max_n1,
+			     int min_n2, int max_n2, long freq_min,
+			     long freq_max, unsigned char *mdiv,
+			     unsigned char *ndiv)
+{
+	long diff, best_diff;
+	unsigned int m;
+	unsigned char n1, n2;
+	unsigned char best_n1 = 16+2, best_n2 = 2, best_m = 125+2;
+
+	best_diff = freq;
+
+	for (n2 = min_n2; n2 <= max_n2; n2++) {
+		for (n1 = min_n1+2; n1 <= max_n1+2; n1++) {
+			m = (freq * n1 * (1 << n2) + HALF_BASE_FREQ) /
+				BASE_FREQ;
+			if (m < min_m + 2 || m > 127+2)
+				continue;
+			if ((m * BASE_FREQ >= freq_min * n1) &&
+			    (m * BASE_FREQ <= freq_max * n1)) {
+				diff = freq * (1 << n2) * n1 - BASE_FREQ * m;
+				if (diff < 0)
+					diff = -diff;
+				if (diff < best_diff) {
+					best_diff = diff;
+					best_m = m;
+					best_n1 = n1;
+					best_n2 = n2;
+				}
+			}
+		}
+	}
+
+	if (max_n1 == 63)
+		*ndiv = (best_n1 - 2) | (best_n2 << 6);
+	else
+		*ndiv = (best_n1 - 2) | (best_n2 << 5);
+
+	*mdiv = best_m - 2;
+
+	return 0;
+}
+
+#ifdef SAVAGEFB_DEBUG
+/* This function is used to debug, it prints out the contents of s3 regs */
+
+static void SavagePrintRegs(struct savagefb_par *par)
+{
+	unsigned char i;
+	int vgaCRIndex = 0x3d4;
+	int vgaCRReg = 0x3d5;
+
+	printk(KERN_DEBUG "SR    x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE "
+	       "xF");
+
+	for (i = 0; i < 0x70; i++) {
+		if (!(i % 16))
+			printk(KERN_DEBUG "\nSR%xx ", i >> 4);
+		vga_out8(0x3c4, i, par);
+		printk(KERN_DEBUG " %02x", vga_in8(0x3c5, par));
+	}
+
+	printk(KERN_DEBUG "\n\nCR    x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC "
+	       "xD xE xF");
+
+	for (i = 0; i < 0xB7; i++) {
+		if (!(i % 16))
+			printk(KERN_DEBUG "\nCR%xx ", i >> 4);
+		vga_out8(vgaCRIndex, i, par);
+		printk(KERN_DEBUG " %02x", vga_in8(vgaCRReg, par));
+	}
+
+	printk(KERN_DEBUG "\n\n");
+}
+#endif
+
+/* --------------------------------------------------------------------- */
+
+static void savage_get_default_par(struct savagefb_par *par, struct savage_reg *reg)
+{
+	unsigned char cr3a, cr53, cr66;
+
+	vga_out16(0x3d4, 0x4838, par);
+	vga_out16(0x3d4, 0xa039, par);
+	vga_out16(0x3c4, 0x0608, par);
+
+	vga_out8(0x3d4, 0x66, par);
+	cr66 = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr66 | 0x80, par);
+	vga_out8(0x3d4, 0x3a, par);
+	cr3a = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr3a | 0x80, par);
+	vga_out8(0x3d4, 0x53, par);
+	cr53 = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr53 & 0x7f, par);
+
+	vga_out8(0x3d4, 0x66, par);
+	vga_out8(0x3d5, cr66, par);
+	vga_out8(0x3d4, 0x3a, par);
+	vga_out8(0x3d5, cr3a, par);
+
+	vga_out8(0x3d4, 0x66, par);
+	vga_out8(0x3d5, cr66, par);
+	vga_out8(0x3d4, 0x3a, par);
+	vga_out8(0x3d5, cr3a, par);
+
+	/* unlock extended seq regs */
+	vga_out8(0x3c4, 0x08, par);
+	reg->SR08 = vga_in8(0x3c5, par);
+	vga_out8(0x3c5, 0x06, par);
+
+	/* now save all the extended regs we need */
+	vga_out8(0x3d4, 0x31, par);
+	reg->CR31 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x32, par);
+	reg->CR32 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x34, par);
+	reg->CR34 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x36, par);
+	reg->CR36 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x3a, par);
+	reg->CR3A = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x40, par);
+	reg->CR40 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x42, par);
+	reg->CR42 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x45, par);
+	reg->CR45 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x50, par);
+	reg->CR50 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x51, par);
+	reg->CR51 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x53, par);
+	reg->CR53 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x58, par);
+	reg->CR58 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x60, par);
+	reg->CR60 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x66, par);
+	reg->CR66 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x67, par);
+	reg->CR67 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x68, par);
+	reg->CR68 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x69, par);
+	reg->CR69 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x6f, par);
+	reg->CR6F = vga_in8(0x3d5, par);
+
+	vga_out8(0x3d4, 0x33, par);
+	reg->CR33 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x86, par);
+	reg->CR86 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x88, par);
+	reg->CR88 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x90, par);
+	reg->CR90 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x91, par);
+	reg->CR91 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0xb0, par);
+	reg->CRB0 = vga_in8(0x3d5, par) | 0x80;
+
+	/* extended mode timing regs */
+	vga_out8(0x3d4, 0x3b, par);
+	reg->CR3B = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x3c, par);
+	reg->CR3C = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x43, par);
+	reg->CR43 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x5d, par);
+	reg->CR5D = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x5e, par);
+	reg->CR5E = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x65, par);
+	reg->CR65 = vga_in8(0x3d5, par);
+
+	/* save seq extended regs for DCLK PLL programming */
+	vga_out8(0x3c4, 0x0e, par);
+	reg->SR0E = vga_in8(0x3c5, par);
+	vga_out8(0x3c4, 0x0f, par);
+	reg->SR0F = vga_in8(0x3c5, par);
+	vga_out8(0x3c4, 0x10, par);
+	reg->SR10 = vga_in8(0x3c5, par);
+	vga_out8(0x3c4, 0x11, par);
+	reg->SR11 = vga_in8(0x3c5, par);
+	vga_out8(0x3c4, 0x12, par);
+	reg->SR12 = vga_in8(0x3c5, par);
+	vga_out8(0x3c4, 0x13, par);
+	reg->SR13 = vga_in8(0x3c5, par);
+	vga_out8(0x3c4, 0x29, par);
+	reg->SR29 = vga_in8(0x3c5, par);
+
+	vga_out8(0x3c4, 0x15, par);
+	reg->SR15 = vga_in8(0x3c5, par);
+	vga_out8(0x3c4, 0x30, par);
+	reg->SR30 = vga_in8(0x3c5, par);
+	vga_out8(0x3c4, 0x18, par);
+	reg->SR18 = vga_in8(0x3c5, par);
+
+	/* Save flat panel expansion registers. */
+	if (par->chip == S3_SAVAGE_MX) {
+		int i;
+
+		for (i = 0; i < 8; i++) {
+			vga_out8(0x3c4, 0x54+i, par);
+			reg->SR54[i] = vga_in8(0x3c5, par);
+		}
+	}
+
+	vga_out8(0x3d4, 0x66, par);
+	cr66 = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr66 | 0x80, par);
+	vga_out8(0x3d4, 0x3a, par);
+	cr3a = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr3a | 0x80, par);
+
+	/* now save MIU regs */
+	if (par->chip != S3_SAVAGE_MX) {
+		reg->MMPR0 = savage_in32(FIFO_CONTROL_REG, par);
+		reg->MMPR1 = savage_in32(MIU_CONTROL_REG, par);
+		reg->MMPR2 = savage_in32(STREAMS_TIMEOUT_REG, par);
+		reg->MMPR3 = savage_in32(MISC_TIMEOUT_REG, par);
+	}
+
+	vga_out8(0x3d4, 0x3a, par);
+	vga_out8(0x3d5, cr3a, par);
+	vga_out8(0x3d4, 0x66, par);
+	vga_out8(0x3d5, cr66, par);
+}
+
+static void savage_set_default_par(struct savagefb_par *par,
+				struct savage_reg *reg)
+{
+	unsigned char cr3a, cr53, cr66;
+
+	vga_out16(0x3d4, 0x4838, par);
+	vga_out16(0x3d4, 0xa039, par);
+	vga_out16(0x3c4, 0x0608, par);
+
+	vga_out8(0x3d4, 0x66, par);
+	cr66 = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr66 | 0x80, par);
+	vga_out8(0x3d4, 0x3a, par);
+	cr3a = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr3a | 0x80, par);
+	vga_out8(0x3d4, 0x53, par);
+	cr53 = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr53 & 0x7f, par);
+
+	vga_out8(0x3d4, 0x66, par);
+	vga_out8(0x3d5, cr66, par);
+	vga_out8(0x3d4, 0x3a, par);
+	vga_out8(0x3d5, cr3a, par);
+
+	vga_out8(0x3d4, 0x66, par);
+	vga_out8(0x3d5, cr66, par);
+	vga_out8(0x3d4, 0x3a, par);
+	vga_out8(0x3d5, cr3a, par);
+
+	/* unlock extended seq regs */
+	vga_out8(0x3c4, 0x08, par);
+	vga_out8(0x3c5, reg->SR08, par);
+	vga_out8(0x3c5, 0x06, par);
+
+	/* now restore all the extended regs we need */
+	vga_out8(0x3d4, 0x31, par);
+	vga_out8(0x3d5, reg->CR31, par);
+	vga_out8(0x3d4, 0x32, par);
+	vga_out8(0x3d5, reg->CR32, par);
+	vga_out8(0x3d4, 0x34, par);
+	vga_out8(0x3d5, reg->CR34, par);
+	vga_out8(0x3d4, 0x36, par);
+	vga_out8(0x3d5,reg->CR36, par);
+	vga_out8(0x3d4, 0x3a, par);
+	vga_out8(0x3d5, reg->CR3A, par);
+	vga_out8(0x3d4, 0x40, par);
+	vga_out8(0x3d5, reg->CR40, par);
+	vga_out8(0x3d4, 0x42, par);
+	vga_out8(0x3d5, reg->CR42, par);
+	vga_out8(0x3d4, 0x45, par);
+	vga_out8(0x3d5, reg->CR45, par);
+	vga_out8(0x3d4, 0x50, par);
+	vga_out8(0x3d5, reg->CR50, par);
+	vga_out8(0x3d4, 0x51, par);
+	vga_out8(0x3d5, reg->CR51, par);
+	vga_out8(0x3d4, 0x53, par);
+	vga_out8(0x3d5, reg->CR53, par);
+	vga_out8(0x3d4, 0x58, par);
+	vga_out8(0x3d5, reg->CR58, par);
+	vga_out8(0x3d4, 0x60, par);
+	vga_out8(0x3d5, reg->CR60, par);
+	vga_out8(0x3d4, 0x66, par);
+	vga_out8(0x3d5, reg->CR66, par);
+	vga_out8(0x3d4, 0x67, par);
+	vga_out8(0x3d5, reg->CR67, par);
+	vga_out8(0x3d4, 0x68, par);
+	vga_out8(0x3d5, reg->CR68, par);
+	vga_out8(0x3d4, 0x69, par);
+	vga_out8(0x3d5, reg->CR69, par);
+	vga_out8(0x3d4, 0x6f, par);
+	vga_out8(0x3d5, reg->CR6F, par);
+
+	vga_out8(0x3d4, 0x33, par);
+	vga_out8(0x3d5, reg->CR33, par);
+	vga_out8(0x3d4, 0x86, par);
+	vga_out8(0x3d5, reg->CR86, par);
+	vga_out8(0x3d4, 0x88, par);
+	vga_out8(0x3d5, reg->CR88, par);
+	vga_out8(0x3d4, 0x90, par);
+	vga_out8(0x3d5, reg->CR90, par);
+	vga_out8(0x3d4, 0x91, par);
+	vga_out8(0x3d5, reg->CR91, par);
+	vga_out8(0x3d4, 0xb0, par);
+	vga_out8(0x3d5, reg->CRB0, par);
+
+	/* extended mode timing regs */
+	vga_out8(0x3d4, 0x3b, par);
+	vga_out8(0x3d5, reg->CR3B, par);
+	vga_out8(0x3d4, 0x3c, par);
+	vga_out8(0x3d5, reg->CR3C, par);
+	vga_out8(0x3d4, 0x43, par);
+	vga_out8(0x3d5, reg->CR43, par);
+	vga_out8(0x3d4, 0x5d, par);
+	vga_out8(0x3d5, reg->CR5D, par);
+	vga_out8(0x3d4, 0x5e, par);
+	vga_out8(0x3d5, reg->CR5E, par);
+	vga_out8(0x3d4, 0x65, par);
+	vga_out8(0x3d5, reg->CR65, par);
+
+	/* save seq extended regs for DCLK PLL programming */
+	vga_out8(0x3c4, 0x0e, par);
+	vga_out8(0x3c5, reg->SR0E, par);
+	vga_out8(0x3c4, 0x0f, par);
+	vga_out8(0x3c5, reg->SR0F, par);
+	vga_out8(0x3c4, 0x10, par);
+	vga_out8(0x3c5, reg->SR10, par);
+	vga_out8(0x3c4, 0x11, par);
+	vga_out8(0x3c5, reg->SR11, par);
+	vga_out8(0x3c4, 0x12, par);
+	vga_out8(0x3c5, reg->SR12, par);
+	vga_out8(0x3c4, 0x13, par);
+	vga_out8(0x3c5, reg->SR13, par);
+	vga_out8(0x3c4, 0x29, par);
+	vga_out8(0x3c5, reg->SR29, par);
+
+	vga_out8(0x3c4, 0x15, par);
+	vga_out8(0x3c5, reg->SR15, par);
+	vga_out8(0x3c4, 0x30, par);
+	vga_out8(0x3c5, reg->SR30, par);
+	vga_out8(0x3c4, 0x18, par);
+	vga_out8(0x3c5, reg->SR18, par);
+
+	/* Save flat panel expansion registers. */
+	if (par->chip == S3_SAVAGE_MX) {
+		int i;
+
+		for (i = 0; i < 8; i++) {
+			vga_out8(0x3c4, 0x54+i, par);
+			vga_out8(0x3c5, reg->SR54[i], par);
+		}
+	}
+
+	vga_out8(0x3d4, 0x66, par);
+	cr66 = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr66 | 0x80, par);
+	vga_out8(0x3d4, 0x3a, par);
+	cr3a = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr3a | 0x80, par);
+
+	/* now save MIU regs */
+	if (par->chip != S3_SAVAGE_MX) {
+		savage_out32(FIFO_CONTROL_REG, reg->MMPR0, par);
+		savage_out32(MIU_CONTROL_REG, reg->MMPR1, par);
+		savage_out32(STREAMS_TIMEOUT_REG, reg->MMPR2, par);
+		savage_out32(MISC_TIMEOUT_REG, reg->MMPR3, par);
+	}
+
+	vga_out8(0x3d4, 0x3a, par);
+	vga_out8(0x3d5, cr3a, par);
+	vga_out8(0x3d4, 0x66, par);
+	vga_out8(0x3d5, cr66, par);
+}
+
+static void savage_update_var(struct fb_var_screeninfo *var,
+			      const struct fb_videomode *modedb)
+{
+	var->xres = var->xres_virtual = modedb->xres;
+	var->yres = modedb->yres;
+        if (var->yres_virtual < var->yres)
+	    var->yres_virtual = var->yres;
+        var->xoffset = var->yoffset = 0;
+        var->pixclock = modedb->pixclock;
+        var->left_margin = modedb->left_margin;
+        var->right_margin = modedb->right_margin;
+        var->upper_margin = modedb->upper_margin;
+        var->lower_margin = modedb->lower_margin;
+        var->hsync_len = modedb->hsync_len;
+        var->vsync_len = modedb->vsync_len;
+        var->sync = modedb->sync;
+        var->vmode = modedb->vmode;
+}
+
+static int savagefb_check_var(struct fb_var_screeninfo   *var,
+			      struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+	int memlen, vramlen, mode_valid = 0;
+
+	DBG("savagefb_check_var");
+
+	if (!var->pixclock)
+		return -EINVAL;
+
+	var->transp.offset = 0;
+	var->transp.length = 0;
+	switch (var->bits_per_pixel) {
+	case 8:
+		var->red.offset = var->green.offset =
+			var->blue.offset = 0;
+		var->red.length = var->green.length =
+			var->blue.length = var->bits_per_pixel;
+		break;
+	case 16:
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		break;
+	case 32:
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (!info->monspecs.hfmax || !info->monspecs.vfmax ||
+	    !info->monspecs.dclkmax || !fb_validate_mode(var, info))
+		mode_valid = 1;
+
+	/* calculate modeline if supported by monitor */
+	if (!mode_valid && info->monspecs.gtf) {
+		if (!fb_get_mode(FB_MAXTIMINGS, 0, var, info))
+			mode_valid = 1;
+	}
+
+	if (!mode_valid) {
+		const struct fb_videomode *mode;
+
+		mode = fb_find_best_mode(var, &info->modelist);
+		if (mode) {
+			savage_update_var(var, mode);
+			mode_valid = 1;
+		}
+	}
+
+	if (!mode_valid && info->monspecs.modedb_len)
+		return -EINVAL;
+
+	/* Is the mode larger than the LCD panel? */
+	if (par->SavagePanelWidth &&
+	    (var->xres > par->SavagePanelWidth ||
+	     var->yres > par->SavagePanelHeight)) {
+		printk(KERN_INFO "Mode (%dx%d) larger than the LCD panel "
+		       "(%dx%d)\n", var->xres,  var->yres,
+		       par->SavagePanelWidth,
+		       par->SavagePanelHeight);
+		return -1;
+	}
+
+	if (var->yres_virtual < var->yres)
+		var->yres_virtual = var->yres;
+	if (var->xres_virtual < var->xres)
+		var->xres_virtual = var->xres;
+
+	vramlen = info->fix.smem_len;
+
+	memlen = var->xres_virtual * var->bits_per_pixel *
+		var->yres_virtual / 8;
+	if (memlen > vramlen) {
+		var->yres_virtual = vramlen * 8 /
+			(var->xres_virtual * var->bits_per_pixel);
+		memlen = var->xres_virtual * var->bits_per_pixel *
+			var->yres_virtual / 8;
+	}
+
+	/* we must round yres/xres down, we already rounded y/xres_virtual up
+	   if it was possible. We should return -EINVAL, but I disagree */
+	if (var->yres_virtual < var->yres)
+		var->yres = var->yres_virtual;
+	if (var->xres_virtual < var->xres)
+		var->xres = var->xres_virtual;
+	if (var->xoffset + var->xres > var->xres_virtual)
+		var->xoffset = var->xres_virtual - var->xres;
+	if (var->yoffset + var->yres > var->yres_virtual)
+		var->yoffset = var->yres_virtual - var->yres;
+
+	return 0;
+}
+
+
+static int savagefb_decode_var(struct fb_var_screeninfo   *var,
+			       struct savagefb_par        *par,
+			       struct savage_reg          *reg)
+{
+	struct xtimings timings;
+	int width, dclk, i, j; /*, refresh; */
+	unsigned int m, n, r;
+	unsigned char tmp = 0;
+	unsigned int pixclock = var->pixclock;
+
+	DBG("savagefb_decode_var");
+
+	memset(&timings, 0, sizeof(timings));
+
+	if (!pixclock) pixclock = 10000;	/* 10ns = 100MHz */
+	timings.Clock = 1000000000 / pixclock;
+	if (timings.Clock < 1) timings.Clock = 1;
+	timings.dblscan = var->vmode & FB_VMODE_DOUBLE;
+	timings.interlaced = var->vmode & FB_VMODE_INTERLACED;
+	timings.HDisplay = var->xres;
+	timings.HSyncStart = timings.HDisplay + var->right_margin;
+	timings.HSyncEnd = timings.HSyncStart + var->hsync_len;
+	timings.HTotal = timings.HSyncEnd + var->left_margin;
+	timings.VDisplay = var->yres;
+	timings.VSyncStart = timings.VDisplay + var->lower_margin;
+	timings.VSyncEnd = timings.VSyncStart + var->vsync_len;
+	timings.VTotal = timings.VSyncEnd + var->upper_margin;
+	timings.sync = var->sync;
+
+
+	par->depth  = var->bits_per_pixel;
+	par->vwidth = var->xres_virtual;
+
+	if (var->bits_per_pixel == 16  &&  par->chip == S3_SAVAGE3D) {
+		timings.HDisplay *= 2;
+		timings.HSyncStart *= 2;
+		timings.HSyncEnd *= 2;
+		timings.HTotal *= 2;
+	}
+
+	/*
+	 * This will allocate the datastructure and initialize all of the
+	 * generic VGA registers.
+	 */
+	vgaHWInit(var, par, &timings, reg);
+
+	/* We need to set CR67 whether or not we use the BIOS. */
+
+	dclk = timings.Clock;
+	reg->CR67 = 0x00;
+
+	switch(var->bits_per_pixel) {
+	case 8:
+		if ((par->chip == S3_SAVAGE2000) && (dclk >= 230000))
+			reg->CR67 = 0x10;	/* 8bpp, 2 pixels/clock */
+		else
+			reg->CR67 = 0x00;	/* 8bpp, 1 pixel/clock */
+		break;
+	case 15:
+		if (S3_SAVAGE_MOBILE_SERIES(par->chip) ||
+		    ((par->chip == S3_SAVAGE2000) && (dclk >= 230000)))
+			reg->CR67 = 0x30;	/* 15bpp, 2 pixel/clock */
+		else
+			reg->CR67 = 0x20;	/* 15bpp, 1 pixels/clock */
+		break;
+	case 16:
+		if (S3_SAVAGE_MOBILE_SERIES(par->chip) ||
+		   ((par->chip == S3_SAVAGE2000) && (dclk >= 230000)))
+			reg->CR67 = 0x50;	/* 16bpp, 2 pixel/clock */
+		else
+			reg->CR67 = 0x40;	/* 16bpp, 1 pixels/clock */
+		break;
+	case 24:
+		reg->CR67 = 0x70;
+		break;
+	case 32:
+		reg->CR67 = 0xd0;
+		break;
+	}
+
+	/*
+	 * Either BIOS use is disabled, or we failed to find a suitable
+	 * match.  Fall back to traditional register-crunching.
+	 */
+
+	vga_out8(0x3d4, 0x3a, par);
+	tmp = vga_in8(0x3d5, par);
+	if (1 /*FIXME:psav->pci_burst*/)
+		reg->CR3A = (tmp & 0x7f) | 0x15;
+	else
+		reg->CR3A = tmp | 0x95;
+
+	reg->CR53 = 0x00;
+	reg->CR31 = 0x8c;
+	reg->CR66 = 0x89;
+
+	vga_out8(0x3d4, 0x58, par);
+	reg->CR58 = vga_in8(0x3d5, par) & 0x80;
+	reg->CR58 |= 0x13;
+
+	reg->SR15 = 0x03 | 0x80;
+	reg->SR18 = 0x00;
+	reg->CR43 = reg->CR45 = reg->CR65 = 0x00;
+
+	vga_out8(0x3d4, 0x40, par);
+	reg->CR40 = vga_in8(0x3d5, par) & ~0x01;
+
+	reg->MMPR0 = 0x010400;
+	reg->MMPR1 = 0x00;
+	reg->MMPR2 = 0x0808;
+	reg->MMPR3 = 0x08080810;
+
+	SavageCalcClock(dclk, 1, 1, 127, 0, 4, 180000, 360000, &m, &n, &r);
+	/* m = 107; n = 4; r = 2; */
+
+	if (par->MCLK <= 0) {
+		reg->SR10 = 255;
+		reg->SR11 = 255;
+	} else {
+		common_calc_clock(par->MCLK, 1, 1, 31, 0, 3, 135000, 270000,
+				   &reg->SR11, &reg->SR10);
+		/*      reg->SR10 = 80; // MCLK == 286000 */
+		/*      reg->SR11 = 125; */
+	}
+
+	reg->SR12 = (r << 6) | (n & 0x3f);
+	reg->SR13 = m & 0xff;
+	reg->SR29 = (r & 4) | (m & 0x100) >> 5 | (n & 0x40) >> 2;
+
+	if (var->bits_per_pixel < 24)
+		reg->MMPR0 -= 0x8000;
+	else
+		reg->MMPR0 -= 0x4000;
+
+	if (timings.interlaced)
+		reg->CR42 = 0x20;
+	else
+		reg->CR42 = 0x00;
+
+	reg->CR34 = 0x10; /* display fifo */
+
+	i = ((((timings.HTotal >> 3) - 5) & 0x100) >> 8) |
+		((((timings.HDisplay >> 3) - 1) & 0x100) >> 7) |
+		((((timings.HSyncStart >> 3) - 1) & 0x100) >> 6) |
+		((timings.HSyncStart & 0x800) >> 7);
+
+	if ((timings.HSyncEnd >> 3) - (timings.HSyncStart >> 3) > 64)
+		i |= 0x08;
+	if ((timings.HSyncEnd >> 3) - (timings.HSyncStart >> 3) > 32)
+		i |= 0x20;
+
+	j = (reg->CRTC[0] + ((i & 0x01) << 8) +
+	     reg->CRTC[4] + ((i & 0x10) << 4) + 1) / 2;
+
+	if (j - (reg->CRTC[4] + ((i & 0x10) << 4)) < 4) {
+		if (reg->CRTC[4] + ((i & 0x10) << 4) + 4 <=
+		    reg->CRTC[0] + ((i & 0x01) << 8))
+			j = reg->CRTC[4] + ((i & 0x10) << 4) + 4;
+		else
+			j = reg->CRTC[0] + ((i & 0x01) << 8) + 1;
+	}
+
+	reg->CR3B = j & 0xff;
+	i |= (j & 0x100) >> 2;
+	reg->CR3C = (reg->CRTC[0] + ((i & 0x01) << 8)) / 2;
+	reg->CR5D = i;
+	reg->CR5E = (((timings.VTotal - 2) & 0x400) >> 10) |
+		(((timings.VDisplay - 1) & 0x400) >> 9) |
+		(((timings.VSyncStart) & 0x400) >> 8) |
+		(((timings.VSyncStart) & 0x400) >> 6) | 0x40;
+	width = (var->xres_virtual * ((var->bits_per_pixel+7) / 8)) >> 3;
+	reg->CR91 = reg->CRTC[19] = 0xff & width;
+	reg->CR51 = (0x300 & width) >> 4;
+	reg->CR90 = 0x80 | (width >> 8);
+	reg->MiscOutReg |= 0x0c;
+
+	/* Set frame buffer description. */
+
+	if (var->bits_per_pixel <= 8)
+		reg->CR50 = 0;
+	else if (var->bits_per_pixel <= 16)
+		reg->CR50 = 0x10;
+	else
+		reg->CR50 = 0x30;
+
+	if (var->xres_virtual <= 640)
+		reg->CR50 |= 0x40;
+	else if (var->xres_virtual == 800)
+		reg->CR50 |= 0x80;
+	else if (var->xres_virtual == 1024)
+		reg->CR50 |= 0x00;
+	else if (var->xres_virtual == 1152)
+		reg->CR50 |= 0x01;
+	else if (var->xres_virtual == 1280)
+		reg->CR50 |= 0xc0;
+	else if (var->xres_virtual == 1600)
+		reg->CR50 |= 0x81;
+	else
+		reg->CR50 |= 0xc1;	/* Use GBD */
+
+	if (par->chip == S3_SAVAGE2000)
+		reg->CR33 = 0x08;
+	else
+		reg->CR33 = 0x20;
+
+	reg->CRTC[0x17] = 0xeb;
+
+	reg->CR67 |= 1;
+
+	vga_out8(0x3d4, 0x36, par);
+	reg->CR36 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x68, par);
+	reg->CR68 = vga_in8(0x3d5, par);
+	reg->CR69 = 0;
+	vga_out8(0x3d4, 0x6f, par);
+	reg->CR6F = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x86, par);
+	reg->CR86 = vga_in8(0x3d5, par);
+	vga_out8(0x3d4, 0x88, par);
+	reg->CR88 = vga_in8(0x3d5, par) | 0x08;
+	vga_out8(0x3d4, 0xb0, par);
+	reg->CRB0 = vga_in8(0x3d5, par) | 0x80;
+
+	return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+/*
+ *    Set a single color register. Return != 0 for invalid regno.
+ */
+static int savagefb_setcolreg(unsigned        regno,
+			      unsigned        red,
+			      unsigned        green,
+			      unsigned        blue,
+			      unsigned        transp,
+			      struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+
+	if (regno >= NR_PALETTE)
+		return -EINVAL;
+
+	par->palette[regno].red    = red;
+	par->palette[regno].green  = green;
+	par->palette[regno].blue   = blue;
+	par->palette[regno].transp = transp;
+
+	switch (info->var.bits_per_pixel) {
+	case 8:
+		vga_out8(0x3c8, regno, par);
+
+		vga_out8(0x3c9, red   >> 10, par);
+		vga_out8(0x3c9, green >> 10, par);
+		vga_out8(0x3c9, blue  >> 10, par);
+		break;
+
+	case 16:
+		if (regno < 16)
+			((u32 *)info->pseudo_palette)[regno] =
+				((red   & 0xf800)      ) |
+				((green & 0xfc00) >>  5) |
+				((blue  & 0xf800) >> 11);
+		break;
+
+	case 24:
+		if (regno < 16)
+			((u32 *)info->pseudo_palette)[regno] =
+				((red    & 0xff00) <<  8) |
+				((green  & 0xff00)      ) |
+				((blue   & 0xff00) >>  8);
+		break;
+	case 32:
+		if (regno < 16)
+			((u32 *)info->pseudo_palette)[regno] =
+				((transp & 0xff00) << 16) |
+				((red    & 0xff00) <<  8) |
+				((green  & 0xff00)      ) |
+				((blue   & 0xff00) >>  8);
+		break;
+
+	default:
+		return 1;
+	}
+
+	return 0;
+}
+
+static void savagefb_set_par_int(struct savagefb_par  *par, struct savage_reg *reg)
+{
+	unsigned char tmp, cr3a, cr66, cr67;
+
+	DBG("savagefb_set_par_int");
+
+	par->SavageWaitIdle(par);
+
+	vga_out8(0x3c2, 0x23, par);
+
+	vga_out16(0x3d4, 0x4838, par);
+	vga_out16(0x3d4, 0xa539, par);
+	vga_out16(0x3c4, 0x0608, par);
+
+	vgaHWProtect(par, 1);
+
+	/*
+	 * Some Savage/MX and /IX systems go nuts when trying to exit the
+	 * server after WindowMaker has displayed a gradient background.  I
+	 * haven't been able to find what causes it, but a non-destructive
+	 * switch to mode 3 here seems to eliminate the issue.
+	 */
+
+	VerticalRetraceWait(par);
+	vga_out8(0x3d4, 0x67, par);
+	cr67 = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr67/*par->CR67*/ & ~0x0c, par); /* no STREAMS yet */
+
+	vga_out8(0x3d4, 0x23, par);
+	vga_out8(0x3d5, 0x00, par);
+	vga_out8(0x3d4, 0x26, par);
+	vga_out8(0x3d5, 0x00, par);
+
+	/* restore extended regs */
+	vga_out8(0x3d4, 0x66, par);
+	vga_out8(0x3d5, reg->CR66, par);
+	vga_out8(0x3d4, 0x3a, par);
+	vga_out8(0x3d5, reg->CR3A, par);
+	vga_out8(0x3d4, 0x31, par);
+	vga_out8(0x3d5, reg->CR31, par);
+	vga_out8(0x3d4, 0x32, par);
+	vga_out8(0x3d5, reg->CR32, par);
+	vga_out8(0x3d4, 0x58, par);
+	vga_out8(0x3d5, reg->CR58, par);
+	vga_out8(0x3d4, 0x53, par);
+	vga_out8(0x3d5, reg->CR53 & 0x7f, par);
+
+	vga_out16(0x3c4, 0x0608, par);
+
+	/* Restore DCLK registers. */
+
+	vga_out8(0x3c4, 0x0e, par);
+	vga_out8(0x3c5, reg->SR0E, par);
+	vga_out8(0x3c4, 0x0f, par);
+	vga_out8(0x3c5, reg->SR0F, par);
+	vga_out8(0x3c4, 0x29, par);
+	vga_out8(0x3c5, reg->SR29, par);
+	vga_out8(0x3c4, 0x15, par);
+	vga_out8(0x3c5, reg->SR15, par);
+
+	/* Restore flat panel expansion registers. */
+	if (par->chip == S3_SAVAGE_MX) {
+		int i;
+
+		for (i = 0; i < 8; i++) {
+			vga_out8(0x3c4, 0x54+i, par);
+			vga_out8(0x3c5, reg->SR54[i], par);
+		}
+	}
+
+	vgaHWRestore (par, reg);
+
+	/* extended mode timing registers */
+	vga_out8(0x3d4, 0x53, par);
+	vga_out8(0x3d5, reg->CR53, par);
+	vga_out8(0x3d4, 0x5d, par);
+	vga_out8(0x3d5, reg->CR5D, par);
+	vga_out8(0x3d4, 0x5e, par);
+	vga_out8(0x3d5, reg->CR5E, par);
+	vga_out8(0x3d4, 0x3b, par);
+	vga_out8(0x3d5, reg->CR3B, par);
+	vga_out8(0x3d4, 0x3c, par);
+	vga_out8(0x3d5, reg->CR3C, par);
+	vga_out8(0x3d4, 0x43, par);
+	vga_out8(0x3d5, reg->CR43, par);
+	vga_out8(0x3d4, 0x65, par);
+	vga_out8(0x3d5, reg->CR65, par);
+
+	/* restore the desired video mode with cr67 */
+	vga_out8(0x3d4, 0x67, par);
+	/* following part not present in X11 driver */
+	cr67 = vga_in8(0x3d5, par) & 0xf;
+	vga_out8(0x3d5, 0x50 | cr67, par);
+	mdelay(10);
+	vga_out8(0x3d4, 0x67, par);
+	/* end of part */
+	vga_out8(0x3d5, reg->CR67 & ~0x0c, par);
+
+	/* other mode timing and extended regs */
+	vga_out8(0x3d4, 0x34, par);
+	vga_out8(0x3d5, reg->CR34, par);
+	vga_out8(0x3d4, 0x40, par);
+	vga_out8(0x3d5, reg->CR40, par);
+	vga_out8(0x3d4, 0x42, par);
+	vga_out8(0x3d5, reg->CR42, par);
+	vga_out8(0x3d4, 0x45, par);
+	vga_out8(0x3d5, reg->CR45, par);
+	vga_out8(0x3d4, 0x50, par);
+	vga_out8(0x3d5, reg->CR50, par);
+	vga_out8(0x3d4, 0x51, par);
+	vga_out8(0x3d5, reg->CR51, par);
+
+	/* memory timings */
+	vga_out8(0x3d4, 0x36, par);
+	vga_out8(0x3d5, reg->CR36, par);
+	vga_out8(0x3d4, 0x60, par);
+	vga_out8(0x3d5, reg->CR60, par);
+	vga_out8(0x3d4, 0x68, par);
+	vga_out8(0x3d5, reg->CR68, par);
+	vga_out8(0x3d4, 0x69, par);
+	vga_out8(0x3d5, reg->CR69, par);
+	vga_out8(0x3d4, 0x6f, par);
+	vga_out8(0x3d5, reg->CR6F, par);
+
+	vga_out8(0x3d4, 0x33, par);
+	vga_out8(0x3d5, reg->CR33, par);
+	vga_out8(0x3d4, 0x86, par);
+	vga_out8(0x3d5, reg->CR86, par);
+	vga_out8(0x3d4, 0x88, par);
+	vga_out8(0x3d5, reg->CR88, par);
+	vga_out8(0x3d4, 0x90, par);
+	vga_out8(0x3d5, reg->CR90, par);
+	vga_out8(0x3d4, 0x91, par);
+	vga_out8(0x3d5, reg->CR91, par);
+
+	if (par->chip == S3_SAVAGE4) {
+		vga_out8(0x3d4, 0xb0, par);
+		vga_out8(0x3d5, reg->CRB0, par);
+	}
+
+	vga_out8(0x3d4, 0x32, par);
+	vga_out8(0x3d5, reg->CR32, par);
+
+	/* unlock extended seq regs */
+	vga_out8(0x3c4, 0x08, par);
+	vga_out8(0x3c5, 0x06, par);
+
+	/* Restore extended sequencer regs for MCLK. SR10 == 255 indicates
+	 * that we should leave the default SR10 and SR11 values there.
+	 */
+	if (reg->SR10 != 255) {
+		vga_out8(0x3c4, 0x10, par);
+		vga_out8(0x3c5, reg->SR10, par);
+		vga_out8(0x3c4, 0x11, par);
+		vga_out8(0x3c5, reg->SR11, par);
+	}
+
+	/* restore extended seq regs for dclk */
+	vga_out8(0x3c4, 0x0e, par);
+	vga_out8(0x3c5, reg->SR0E, par);
+	vga_out8(0x3c4, 0x0f, par);
+	vga_out8(0x3c5, reg->SR0F, par);
+	vga_out8(0x3c4, 0x12, par);
+	vga_out8(0x3c5, reg->SR12, par);
+	vga_out8(0x3c4, 0x13, par);
+	vga_out8(0x3c5, reg->SR13, par);
+	vga_out8(0x3c4, 0x29, par);
+	vga_out8(0x3c5, reg->SR29, par);
+	vga_out8(0x3c4, 0x18, par);
+	vga_out8(0x3c5, reg->SR18, par);
+
+	/* load new m, n pll values for dclk & mclk */
+	vga_out8(0x3c4, 0x15, par);
+	tmp = vga_in8(0x3c5, par) & ~0x21;
+
+	vga_out8(0x3c5, tmp | 0x03, par);
+	vga_out8(0x3c5, tmp | 0x23, par);
+	vga_out8(0x3c5, tmp | 0x03, par);
+	vga_out8(0x3c5, reg->SR15, par);
+	udelay(100);
+
+	vga_out8(0x3c4, 0x30, par);
+	vga_out8(0x3c5, reg->SR30, par);
+	vga_out8(0x3c4, 0x08, par);
+	vga_out8(0x3c5, reg->SR08, par);
+
+	/* now write out cr67 in full, possibly starting STREAMS */
+	VerticalRetraceWait(par);
+	vga_out8(0x3d4, 0x67, par);
+	vga_out8(0x3d5, reg->CR67, par);
+
+	vga_out8(0x3d4, 0x66, par);
+	cr66 = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr66 | 0x80, par);
+	vga_out8(0x3d4, 0x3a, par);
+	cr3a = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr3a | 0x80, par);
+
+	if (par->chip != S3_SAVAGE_MX) {
+		VerticalRetraceWait(par);
+		savage_out32(FIFO_CONTROL_REG, reg->MMPR0, par);
+		par->SavageWaitIdle(par);
+		savage_out32(MIU_CONTROL_REG, reg->MMPR1, par);
+		par->SavageWaitIdle(par);
+		savage_out32(STREAMS_TIMEOUT_REG, reg->MMPR2, par);
+		par->SavageWaitIdle(par);
+		savage_out32(MISC_TIMEOUT_REG, reg->MMPR3, par);
+	}
+
+	vga_out8(0x3d4, 0x66, par);
+	vga_out8(0x3d5, cr66, par);
+	vga_out8(0x3d4, 0x3a, par);
+	vga_out8(0x3d5, cr3a, par);
+
+	SavageSetup2DEngine(par);
+	vgaHWProtect(par, 0);
+}
+
+static void savagefb_update_start(struct savagefb_par *par, int base)
+{
+	/* program the start address registers */
+	vga_out16(0x3d4, (base & 0x00ff00) | 0x0c, par);
+	vga_out16(0x3d4, ((base & 0x00ff) << 8) | 0x0d, par);
+	vga_out8(0x3d4, 0x69, par);
+	vga_out8(0x3d5, (base & 0x7f0000) >> 16, par);
+}
+
+
+static void savagefb_set_fix(struct fb_info *info)
+{
+	info->fix.line_length = info->var.xres_virtual *
+		info->var.bits_per_pixel / 8;
+
+	if (info->var.bits_per_pixel == 8) {
+		info->fix.visual      = FB_VISUAL_PSEUDOCOLOR;
+		info->fix.xpanstep    = 4;
+	} else {
+		info->fix.visual      = FB_VISUAL_TRUECOLOR;
+		info->fix.xpanstep    = 2;
+	}
+
+}
+
+static int savagefb_set_par(struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int err;
+
+	DBG("savagefb_set_par");
+	err = savagefb_decode_var(var, par, &par->state);
+	if (err)
+		return err;
+
+	if (par->dacSpeedBpp <= 0) {
+		if (var->bits_per_pixel > 24)
+			par->dacSpeedBpp = par->clock[3];
+		else if (var->bits_per_pixel >= 24)
+			par->dacSpeedBpp = par->clock[2];
+		else if ((var->bits_per_pixel > 8) && (var->bits_per_pixel < 24))
+			par->dacSpeedBpp = par->clock[1];
+		else if (var->bits_per_pixel <= 8)
+			par->dacSpeedBpp = par->clock[0];
+	}
+
+	/* Set ramdac limits */
+	par->maxClock = par->dacSpeedBpp;
+	par->minClock = 10000;
+
+	savagefb_set_par_int(par, &par->state);
+	fb_set_cmap(&info->cmap, info);
+	savagefb_set_fix(info);
+	savagefb_set_clip(info);
+
+	SavagePrintRegs(par);
+	return 0;
+}
+
+/*
+ *    Pan or Wrap the Display
+ */
+static int savagefb_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info           *info)
+{
+	struct savagefb_par *par = info->par;
+	int base;
+
+	base = (var->yoffset * info->fix.line_length
+	     + (var->xoffset & ~1) * ((info->var.bits_per_pixel+7) / 8)) >> 2;
+
+	savagefb_update_start(par, base);
+	return 0;
+}
+
+static int savagefb_blank(int blank, struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+	u8 sr8 = 0, srd = 0;
+
+	if (par->display_type == DISP_CRT) {
+		vga_out8(0x3c4, 0x08, par);
+		sr8 = vga_in8(0x3c5, par);
+		sr8 |= 0x06;
+		vga_out8(0x3c5, sr8, par);
+		vga_out8(0x3c4, 0x0d, par);
+		srd = vga_in8(0x3c5, par);
+		srd &= 0x50;
+
+		switch (blank) {
+		case FB_BLANK_UNBLANK:
+		case FB_BLANK_NORMAL:
+			break;
+		case FB_BLANK_VSYNC_SUSPEND:
+			srd |= 0x10;
+			break;
+		case FB_BLANK_HSYNC_SUSPEND:
+			srd |= 0x40;
+			break;
+		case FB_BLANK_POWERDOWN:
+			srd |= 0x50;
+			break;
+		}
+
+		vga_out8(0x3c4, 0x0d, par);
+		vga_out8(0x3c5, srd, par);
+	}
+
+	if (par->display_type == DISP_LCD ||
+	    par->display_type == DISP_DFP) {
+		switch(blank) {
+		case FB_BLANK_UNBLANK:
+		case FB_BLANK_NORMAL:
+			vga_out8(0x3c4, 0x31, par); /* SR31 bit 4 - FP enable */
+			vga_out8(0x3c5, vga_in8(0x3c5, par) | 0x10, par);
+			break;
+		case FB_BLANK_VSYNC_SUSPEND:
+		case FB_BLANK_HSYNC_SUSPEND:
+		case FB_BLANK_POWERDOWN:
+			vga_out8(0x3c4, 0x31, par); /* SR31 bit 4 - FP enable */
+			vga_out8(0x3c5, vga_in8(0x3c5, par) & ~0x10, par);
+			break;
+		}
+	}
+
+	return (blank == FB_BLANK_NORMAL) ? 1 : 0;
+}
+
+static int savagefb_open(struct fb_info *info, int user)
+{
+	struct savagefb_par *par = info->par;
+
+	mutex_lock(&par->open_lock);
+
+	if (!par->open_count) {
+		memset(&par->vgastate, 0, sizeof(par->vgastate));
+		par->vgastate.flags = VGA_SAVE_CMAP | VGA_SAVE_FONTS |
+			VGA_SAVE_MODE;
+		par->vgastate.vgabase = par->mmio.vbase + 0x8000;
+		save_vga(&par->vgastate);
+		savage_get_default_par(par, &par->initial);
+	}
+
+	par->open_count++;
+	mutex_unlock(&par->open_lock);
+	return 0;
+}
+
+static int savagefb_release(struct fb_info *info, int user)
+{
+	struct savagefb_par *par = info->par;
+
+	mutex_lock(&par->open_lock);
+
+	if (par->open_count == 1) {
+		savage_set_default_par(par, &par->initial);
+		restore_vga(&par->vgastate);
+	}
+
+	par->open_count--;
+	mutex_unlock(&par->open_lock);
+	return 0;
+}
+
+static const struct fb_ops savagefb_ops = {
+	.owner          = THIS_MODULE,
+	.fb_open        = savagefb_open,
+	.fb_release     = savagefb_release,
+	__FB_DEFAULT_IOMEM_OPS_RDWR,
+	.fb_check_var   = savagefb_check_var,
+	.fb_set_par     = savagefb_set_par,
+	.fb_setcolreg   = savagefb_setcolreg,
+	.fb_pan_display = savagefb_pan_display,
+	.fb_blank       = savagefb_blank,
+#if defined(CONFIG_FB_SAVAGE_ACCEL)
+	.fb_fillrect    = savagefb_fillrect,
+	.fb_copyarea    = savagefb_copyarea,
+	.fb_imageblit   = savagefb_imageblit,
+	.fb_sync        = savagefb_sync,
+#else
+	__FB_DEFAULT_IOMEM_OPS_DRAW,
+#endif
+	__FB_DEFAULT_IOMEM_OPS_MMAP,
+};
+
+/* --------------------------------------------------------------------- */
+
+static const struct fb_var_screeninfo savagefb_var800x600x8 = {
+	.accel_flags =	FB_ACCELF_TEXT,
+	.xres =		800,
+	.yres =		600,
+	.xres_virtual =  800,
+	.yres_virtual =  600,
+	.bits_per_pixel = 8,
+	.pixclock =	25000,
+	.left_margin =	88,
+	.right_margin =	40,
+	.upper_margin =	23,
+	.lower_margin =	1,
+	.hsync_len =	128,
+	.vsync_len =	4,
+	.sync =		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.vmode =	FB_VMODE_NONINTERLACED
+};
+
+static void savage_enable_mmio(struct savagefb_par *par)
+{
+	unsigned char val;
+
+	DBG("savage_enable_mmio\n");
+
+	val = vga_in8(0x3c3, par);
+	vga_out8(0x3c3, val | 0x01, par);
+	val = vga_in8(0x3cc, par);
+	vga_out8(0x3c2, val | 0x01, par);
+
+	if (par->chip >= S3_SAVAGE4) {
+		vga_out8(0x3d4, 0x40, par);
+		val = vga_in8(0x3d5, par);
+		vga_out8(0x3d5, val | 1, par);
+	}
+}
+
+
+static void savage_disable_mmio(struct savagefb_par *par)
+{
+	unsigned char val;
+
+	DBG("savage_disable_mmio\n");
+
+	if (par->chip >= S3_SAVAGE4) {
+		vga_out8(0x3d4, 0x40, par);
+		val = vga_in8(0x3d5, par);
+		vga_out8(0x3d5, val | 1, par);
+	}
+}
+
+
+static int savage_map_mmio(struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+	DBG("savage_map_mmio");
+
+	if (S3_SAVAGE3D_SERIES(par->chip))
+		par->mmio.pbase = pci_resource_start(par->pcidev, 0) +
+			SAVAGE_NEWMMIO_REGBASE_S3;
+	else
+		par->mmio.pbase = pci_resource_start(par->pcidev, 0) +
+			SAVAGE_NEWMMIO_REGBASE_S4;
+
+	par->mmio.len = SAVAGE_NEWMMIO_REGSIZE;
+
+	par->mmio.vbase = ioremap(par->mmio.pbase, par->mmio.len);
+	if (!par->mmio.vbase) {
+		printk("savagefb: unable to map memory mapped IO\n");
+		return -ENOMEM;
+	} else
+		printk(KERN_INFO "savagefb: mapped io at %p\n",
+			par->mmio.vbase);
+
+	info->fix.mmio_start = par->mmio.pbase;
+	info->fix.mmio_len   = par->mmio.len;
+
+	par->bci_base = (u32 __iomem *)(par->mmio.vbase + BCI_BUFFER_OFFSET);
+	par->bci_ptr  = 0;
+
+	savage_enable_mmio(par);
+
+	return 0;
+}
+
+static void savage_unmap_mmio(struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+	DBG("savage_unmap_mmio");
+
+	savage_disable_mmio(par);
+
+	if (par->mmio.vbase) {
+		iounmap(par->mmio.vbase);
+		par->mmio.vbase = NULL;
+	}
+}
+
+static int savage_map_video(struct fb_info *info, int video_len)
+{
+	struct savagefb_par *par = info->par;
+	int resource;
+
+	DBG("savage_map_video");
+
+	if (S3_SAVAGE3D_SERIES(par->chip))
+		resource = 0;
+	else
+		resource = 1;
+
+	par->video.pbase = pci_resource_start(par->pcidev, resource);
+	par->video.len   = video_len;
+	par->video.vbase = ioremap_wc(par->video.pbase, par->video.len);
+
+	if (!par->video.vbase) {
+		printk("savagefb: unable to map screen memory\n");
+		return -ENOMEM;
+	} else
+		printk(KERN_INFO "savagefb: mapped framebuffer at %p, "
+		       "pbase == %x\n", par->video.vbase, par->video.pbase);
+
+	info->fix.smem_start = par->video.pbase;
+	info->fix.smem_len   = par->video.len - par->cob_size;
+	info->screen_base    = par->video.vbase;
+	par->video.wc_cookie = arch_phys_wc_add(par->video.pbase, video_len);
+
+	/* Clear framebuffer, it's all white in memory after boot */
+	memset_io(par->video.vbase, 0, par->video.len);
+
+	return 0;
+}
+
+static void savage_unmap_video(struct fb_info *info)
+{
+	struct savagefb_par *par = info->par;
+
+	DBG("savage_unmap_video");
+
+	if (par->video.vbase) {
+		arch_phys_wc_del(par->video.wc_cookie);
+		iounmap(par->video.vbase);
+		par->video.vbase = NULL;
+		info->screen_base = NULL;
+	}
+}
+
+static int savage_init_hw(struct savagefb_par *par)
+{
+	unsigned char config1, m, n, n1, n2, sr8, cr3f, cr66 = 0, tmp;
+
+	static unsigned char RamSavage3D[] = { 8, 4, 4, 2 };
+	static unsigned char RamSavage4[] =  { 2, 4, 8, 12, 16, 32, 64, 32 };
+	static unsigned char RamSavageMX[] = { 2, 8, 4, 16, 8, 16, 4, 16 };
+	static unsigned char RamSavageNB[] = { 0, 2, 4, 8, 16, 32, 2, 2 };
+	int videoRam, videoRambytes, dvi;
+
+	DBG("savage_init_hw");
+
+	/* unprotect CRTC[0-7] */
+	vga_out8(0x3d4, 0x11, par);
+	tmp = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, tmp & 0x7f, par);
+
+	/* unlock extended regs */
+	vga_out16(0x3d4, 0x4838, par);
+	vga_out16(0x3d4, 0xa039, par);
+	vga_out16(0x3c4, 0x0608, par);
+
+	vga_out8(0x3d4, 0x40, par);
+	tmp = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, tmp & ~0x01, par);
+
+	/* unlock sys regs */
+	vga_out8(0x3d4, 0x38, par);
+	vga_out8(0x3d5, 0x48, par);
+
+	/* Unlock system registers. */
+	vga_out16(0x3d4, 0x4838, par);
+
+	/* Next go on to detect amount of installed ram */
+
+	vga_out8(0x3d4, 0x36, par);            /* for register CR36 (CONFG_REG1), */
+	config1 = vga_in8(0x3d5, par);    /* get amount of vram installed */
+
+	/* Compute the amount of video memory and offscreen memory. */
+
+	switch  (par->chip) {
+	case S3_SAVAGE3D:
+		videoRam = RamSavage3D[(config1 & 0xC0) >> 6 ] * 1024;
+		break;
+
+	case S3_SAVAGE4:
+		/*
+		 * The Savage4 has one ugly special case to consider.  On
+		 * systems with 4 banks of 2Mx32 SDRAM, the BIOS says 4MB
+		 * when it really means 8MB.  Why do it the same when you
+		 * can do it different...
+		 */
+		vga_out8(0x3d4, 0x68, par);	/* memory control 1 */
+		if ((vga_in8(0x3d5, par) & 0xC0) == (0x01 << 6))
+			RamSavage4[1] = 8;
+		fallthrough;
+
+	case S3_SAVAGE2000:
+		videoRam = RamSavage4[(config1 & 0xE0) >> 5] * 1024;
+		break;
+
+	case S3_SAVAGE_MX:
+	case S3_SUPERSAVAGE:
+		videoRam = RamSavageMX[(config1 & 0x0E) >> 1] * 1024;
+		break;
+
+	case S3_PROSAVAGE:
+	case S3_PROSAVAGEDDR:
+	case S3_TWISTER:
+		videoRam = RamSavageNB[(config1 & 0xE0) >> 5] * 1024;
+		break;
+
+	default:
+		/* How did we get here? */
+		videoRam = 0;
+		break;
+	}
+
+	videoRambytes = videoRam * 1024;
+
+	printk(KERN_INFO "savagefb: probed videoram:  %dk\n", videoRam);
+
+	/* reset graphics engine to avoid memory corruption */
+	vga_out8(0x3d4, 0x66, par);
+	cr66 = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr66 | 0x02, par);
+	usleep_range(10000, 11000);
+
+	vga_out8(0x3d4, 0x66, par);
+	vga_out8(0x3d5, cr66 & ~0x02, par);	/* clear reset flag */
+	usleep_range(10000, 11000);
+
+
+	/*
+	 * reset memory interface, 3D engine, AGP master, PCI master,
+	 * master engine unit, motion compensation/LPB
+	 */
+	vga_out8(0x3d4, 0x3f, par);
+	cr3f = vga_in8(0x3d5, par);
+	vga_out8(0x3d5, cr3f | 0x08, par);
+	usleep_range(10000, 11000);
+
+	vga_out8(0x3d4, 0x3f, par);
+	vga_out8(0x3d5, cr3f & ~0x08, par);	/* clear reset flags */
+	usleep_range(10000, 11000);
+
+	/* Savage ramdac speeds */
+	par->numClocks = 4;
+	par->clock[0] = 250000;
+	par->clock[1] = 250000;
+	par->clock[2] = 220000;
+	par->clock[3] = 220000;
+
+	/* detect current mclk */
+	vga_out8(0x3c4, 0x08, par);
+	sr8 = vga_in8(0x3c5, par);
+	vga_out8(0x3c5, 0x06, par);
+	vga_out8(0x3c4, 0x10, par);
+	n = vga_in8(0x3c5, par);
+	vga_out8(0x3c4, 0x11, par);
+	m = vga_in8(0x3c5, par);
+	vga_out8(0x3c4, 0x08, par);
+	vga_out8(0x3c5, sr8, par);
+	m &= 0x7f;
+	n1 = n & 0x1f;
+	n2 = (n >> 5) & 0x03;
+	par->MCLK = ((1431818 * (m+2)) / (n1+2) / (1 << n2) + 50) / 100;
+	printk(KERN_INFO "savagefb: Detected current MCLK value of %d kHz\n",
+		par->MCLK);
+
+	/* check for DVI/flat panel */
+	dvi = 0;
+
+	if (par->chip == S3_SAVAGE4) {
+		unsigned char sr30 = 0x00;
+
+		vga_out8(0x3c4, 0x30, par);
+		/* clear bit 1 */
+		vga_out8(0x3c5, vga_in8(0x3c5, par) & ~0x02, par);
+		sr30 = vga_in8(0x3c5, par);
+		if (sr30 & 0x02 /*0x04 */) {
+			dvi = 1;
+			printk("savagefb: Digital Flat Panel Detected\n");
+		}
+	}
+
+	if ((S3_SAVAGE_MOBILE_SERIES(par->chip) ||
+	     S3_MOBILE_TWISTER_SERIES(par->chip)) && !par->crtonly)
+		par->display_type = DISP_LCD;
+	else if (dvi || (par->chip == S3_SAVAGE4 && par->dvi))
+		par->display_type = DISP_DFP;
+	else
+		par->display_type = DISP_CRT;
+
+	/* Check LCD panel parrmation */
+
+	if (par->display_type == DISP_LCD) {
+		unsigned char cr6b = VGArCR(0x6b, par);
+
+		int panelX = (VGArSEQ(0x61, par) +
+			      ((VGArSEQ(0x66, par) & 0x02) << 7) + 1) * 8;
+		int panelY = (VGArSEQ(0x69, par) +
+			      ((VGArSEQ(0x6e, par) & 0x70) << 4) + 1);
+
+		char * sTechnology = "Unknown";
+
+		/* OK, I admit it.  I don't know how to limit the max dot clock
+		 * for LCD panels of various sizes.  I thought I copied the
+		 * formula from the BIOS, but many users have parrmed me of
+		 * my folly.
+		 *
+		 * Instead, I'll abandon any attempt to automatically limit the
+		 * clock, and add an LCDClock option to XF86Config.  Some day,
+		 * I should come back to this.
+		 */
+
+		enum ACTIVE_DISPLAYS { /* These are the bits in CR6B */
+			ActiveCRT = 0x01,
+			ActiveLCD = 0x02,
+			ActiveTV = 0x04,
+			ActiveCRT2 = 0x20,
+			ActiveDUO = 0x80
+		};
+
+		if ((VGArSEQ(0x39, par) & 0x03) == 0) {
+			sTechnology = "TFT";
+		} else if ((VGArSEQ(0x30, par) & 0x01) == 0) {
+			sTechnology = "DSTN";
+		} else 	{
+			sTechnology = "STN";
+		}
+
+		printk(KERN_INFO "savagefb: %dx%d %s LCD panel detected %s\n",
+		       panelX, panelY, sTechnology,
+		       cr6b & ActiveLCD ? "and active" : "but not active");
+
+		if (cr6b & ActiveLCD) 	{
+			/*
+			 * If the LCD is active and panel expansion is enabled,
+			 * we probably want to kill the HW cursor.
+			 */
+
+			printk(KERN_INFO "savagefb: Limiting video mode to "
+				"%dx%d\n", panelX, panelY);
+
+			par->SavagePanelWidth = panelX;
+			par->SavagePanelHeight = panelY;
+
+		} else
+			par->display_type = DISP_CRT;
+	}
+
+	savage_get_default_par(par, &par->state);
+	par->save = par->state;
+
+	if (S3_SAVAGE4_SERIES(par->chip)) {
+		/*
+		 * The Savage4 and ProSavage have COB coherency bugs which
+		 * render the buffer useless.  We disable it.
+		 */
+		par->cob_index = 2;
+		par->cob_size = 0x8000 << par->cob_index;
+		par->cob_offset = videoRambytes;
+	} else {
+		/* We use 128kB for the COB on all chips. */
+
+		par->cob_index  = 7;
+		par->cob_size   = 0x400 << par->cob_index;
+		par->cob_offset = videoRambytes - par->cob_size;
+	}
+
+	return videoRambytes;
+}
+
+static int savage_init_fb_info(struct fb_info *info, struct pci_dev *dev,
+			       const struct pci_device_id *id)
+{
+	struct savagefb_par *par = info->par;
+	int err = 0;
+
+	par->pcidev  = dev;
+
+	info->fix.type	   = FB_TYPE_PACKED_PIXELS;
+	info->fix.type_aux	   = 0;
+	info->fix.ypanstep	   = 1;
+	info->fix.ywrapstep   = 0;
+	info->fix.accel       = id->driver_data;
+
+	switch (info->fix.accel) {
+	case FB_ACCEL_SUPERSAVAGE:
+		par->chip = S3_SUPERSAVAGE;
+		snprintf(info->fix.id, 16, "SuperSavage");
+		break;
+	case FB_ACCEL_SAVAGE4:
+		par->chip = S3_SAVAGE4;
+		snprintf(info->fix.id, 16, "Savage4");
+		break;
+	case FB_ACCEL_SAVAGE3D:
+		par->chip = S3_SAVAGE3D;
+		snprintf(info->fix.id, 16, "Savage3D");
+		break;
+	case FB_ACCEL_SAVAGE3D_MV:
+		par->chip = S3_SAVAGE3D;
+		snprintf(info->fix.id, 16, "Savage3D-MV");
+		break;
+	case FB_ACCEL_SAVAGE2000:
+		par->chip = S3_SAVAGE2000;
+		snprintf(info->fix.id, 16, "Savage2000");
+		break;
+	case FB_ACCEL_SAVAGE_MX_MV:
+		par->chip = S3_SAVAGE_MX;
+		snprintf(info->fix.id, 16, "Savage/MX-MV");
+		break;
+	case FB_ACCEL_SAVAGE_MX:
+		par->chip = S3_SAVAGE_MX;
+		snprintf(info->fix.id, 16, "Savage/MX");
+		break;
+	case FB_ACCEL_SAVAGE_IX_MV:
+		par->chip = S3_SAVAGE_MX;
+		snprintf(info->fix.id, 16, "Savage/IX-MV");
+		break;
+	case FB_ACCEL_SAVAGE_IX:
+		par->chip = S3_SAVAGE_MX;
+		snprintf(info->fix.id, 16, "Savage/IX");
+		break;
+	case FB_ACCEL_PROSAVAGE_PM:
+		par->chip = S3_PROSAVAGE;
+		snprintf(info->fix.id, 16, "ProSavagePM");
+		break;
+	case FB_ACCEL_PROSAVAGE_KM:
+		par->chip = S3_PROSAVAGE;
+		snprintf(info->fix.id, 16, "ProSavageKM");
+		break;
+	case FB_ACCEL_S3TWISTER_P:
+		par->chip = S3_TWISTER;
+		snprintf(info->fix.id, 16, "TwisterP");
+		break;
+	case FB_ACCEL_S3TWISTER_K:
+		par->chip = S3_TWISTER;
+		snprintf(info->fix.id, 16, "TwisterK");
+		break;
+	case FB_ACCEL_PROSAVAGE_DDR:
+		par->chip = S3_PROSAVAGEDDR;
+		snprintf(info->fix.id, 16, "ProSavageDDR");
+		break;
+	case FB_ACCEL_PROSAVAGE_DDRK:
+		par->chip = S3_PROSAVAGEDDR;
+		snprintf(info->fix.id, 16, "ProSavage8");
+		break;
+	}
+
+	if (S3_SAVAGE3D_SERIES(par->chip)) {
+		par->SavageWaitIdle = savage3D_waitidle;
+		par->SavageWaitFifo = savage3D_waitfifo;
+	} else if (S3_SAVAGE4_SERIES(par->chip) ||
+		   S3_SUPERSAVAGE == par->chip) {
+		par->SavageWaitIdle = savage4_waitidle;
+		par->SavageWaitFifo = savage4_waitfifo;
+	} else {
+		par->SavageWaitIdle = savage2000_waitidle;
+		par->SavageWaitFifo = savage2000_waitfifo;
+	}
+
+	info->var.nonstd      = 0;
+	info->var.activate    = FB_ACTIVATE_NOW;
+	info->var.width       = -1;
+	info->var.height      = -1;
+	info->var.accel_flags = 0;
+
+	info->fbops          = &savagefb_ops;
+	info->flags          = FBINFO_HWACCEL_YPAN |
+		               FBINFO_HWACCEL_XPAN;
+
+	info->pseudo_palette = par->pseudo_palette;
+
+#if defined(CONFIG_FB_SAVAGE_ACCEL)
+	/* FIFO size + padding for commands */
+	info->pixmap.addr = kcalloc(8, 1024, GFP_KERNEL);
+
+	err = -ENOMEM;
+	if (info->pixmap.addr) {
+		info->pixmap.size = 8*1024;
+		info->pixmap.scan_align = 4;
+		info->pixmap.buf_align = 4;
+		info->pixmap.access_align = 32;
+
+		err = fb_alloc_cmap(&info->cmap, NR_PALETTE, 0);
+		if (!err)
+			info->flags |= FBINFO_HWACCEL_COPYAREA |
+				       FBINFO_HWACCEL_FILLRECT |
+				       FBINFO_HWACCEL_IMAGEBLIT;
+		else
+			kfree(info->pixmap.addr);
+	}
+#endif
+	return err;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int savagefb_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct fb_info *info;
+	struct savagefb_par *par;
+	u_int h_sync, v_sync;
+	unsigned char __maybe_unused *edid;
+	int err, lpitch;
+	int video_len;
+
+	DBG("savagefb_probe");
+
+	err = aperture_remove_conflicting_pci_devices(dev, "savagefb");
+	if (err)
+		return err;
+
+	info = framebuffer_alloc(sizeof(struct savagefb_par), &dev->dev);
+	if (!info)
+		return -ENOMEM;
+	par = info->par;
+	mutex_init(&par->open_lock);
+	err = pci_enable_device(dev);
+	if (err)
+		goto failed_enable;
+
+	if ((err = pci_request_regions(dev, "savagefb"))) {
+		printk(KERN_ERR "cannot request PCI regions\n");
+		goto failed_enable;
+	}
+
+	err = -ENOMEM;
+
+	if ((err = savage_init_fb_info(info, dev, id)))
+		goto failed_init;
+
+	err = savage_map_mmio(info);
+	if (err)
+		goto failed_mmio;
+
+	video_len = savage_init_hw(par);
+	/* FIXME: can't be negative */
+	if (video_len < 0) {
+		err = video_len;
+		goto failed_mmio;
+	}
+
+	err = savage_map_video(info, video_len);
+	if (err)
+		goto failed_video;
+
+	INIT_LIST_HEAD(&info->modelist);
+#if defined(CONFIG_FB_SAVAGE_I2C)
+	savagefb_create_i2c_busses(info);
+	savagefb_probe_i2c_connector(info, &edid);
+	fb_edid_to_monspecs(edid, &info->monspecs);
+	kfree(edid);
+	fb_videomode_to_modelist(info->monspecs.modedb,
+				 info->monspecs.modedb_len,
+				 &info->modelist);
+#endif
+	info->var = savagefb_var800x600x8;
+	/* if a panel was detected, default to a CVT mode instead */
+	if (par->SavagePanelWidth) {
+		struct fb_videomode cvt_mode;
+
+		memset(&cvt_mode, 0, sizeof(cvt_mode));
+		cvt_mode.xres = par->SavagePanelWidth;
+		cvt_mode.yres = par->SavagePanelHeight;
+		cvt_mode.refresh = 60;
+		/* FIXME: if we know there is only the panel
+		 * we can enable reduced blanking as well */
+		if (fb_find_mode_cvt(&cvt_mode, 0, 0))
+			printk(KERN_WARNING "No CVT mode found for panel\n");
+		else if (fb_find_mode(&info->var, info, NULL, NULL, 0,
+				      &cvt_mode, 0) != 3)
+			info->var = savagefb_var800x600x8;
+	}
+
+	if (mode_option) {
+		fb_find_mode(&info->var, info, mode_option,
+			     info->monspecs.modedb, info->monspecs.modedb_len,
+			     NULL, 8);
+	} else if (info->monspecs.modedb != NULL) {
+		const struct fb_videomode *mode;
+
+		mode = fb_find_best_display(&info->monspecs, &info->modelist);
+		savage_update_var(&info->var, mode);
+	}
+
+	/* maximize virtual vertical length */
+	lpitch = info->var.xres_virtual*((info->var.bits_per_pixel + 7) >> 3);
+	info->var.yres_virtual = info->fix.smem_len/lpitch;
+
+	if (info->var.yres_virtual < info->var.yres) {
+		err = -ENOMEM;
+		goto failed;
+	}
+
+#if defined(CONFIG_FB_SAVAGE_ACCEL)
+	/*
+	 * The clipping coordinates are masked with 0xFFF, so limit our
+	 * virtual resolutions to these sizes.
+	 */
+	if (info->var.yres_virtual > 0x1000)
+		info->var.yres_virtual = 0x1000;
+
+	if (info->var.xres_virtual > 0x1000)
+		info->var.xres_virtual = 0x1000;
+#endif
+	err = savagefb_check_var(&info->var, info);
+	if (err)
+		goto failed;
+
+	savagefb_set_fix(info);
+
+	/*
+	 * Calculate the hsync and vsync frequencies.  Note that
+	 * we split the 1e12 constant up so that we can preserve
+	 * the precision and fit the results into 32-bit registers.
+	 *  (1953125000 * 512 = 1e12)
+	 */
+	h_sync = 1953125000 / info->var.pixclock;
+	h_sync = h_sync * 512 / (info->var.xres + info->var.left_margin +
+				 info->var.right_margin +
+				 info->var.hsync_len);
+	v_sync = h_sync / (info->var.yres + info->var.upper_margin +
+			   info->var.lower_margin + info->var.vsync_len);
+
+	printk(KERN_INFO "savagefb v" SAVAGEFB_VERSION ": "
+	       "%dkB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
+	       info->fix.smem_len >> 10,
+	       info->var.xres, info->var.yres,
+	       h_sync / 1000, h_sync % 1000, v_sync);
+
+
+	fb_destroy_modedb(info->monspecs.modedb);
+	info->monspecs.modedb = NULL;
+
+	err = register_framebuffer(info);
+	if (err < 0)
+		goto failed;
+
+	printk(KERN_INFO "fb: S3 %s frame buffer device\n",
+	       info->fix.id);
+
+	/*
+	 * Our driver data
+	 */
+	pci_set_drvdata(dev, info);
+
+	return 0;
+
+ failed:
+#ifdef CONFIG_FB_SAVAGE_I2C
+	savagefb_delete_i2c_busses(info);
+	fb_destroy_modelist(&info->modelist);
+	fb_destroy_modedb(info->monspecs.modedb);
+#endif
+	fb_alloc_cmap(&info->cmap, 0, 0);
+	savage_unmap_video(info);
+ failed_video:
+	savage_unmap_mmio(info);
+ failed_mmio:
+	kfree(info->pixmap.addr);
+ failed_init:
+	pci_release_regions(dev);
+ failed_enable:
+	framebuffer_release(info);
+
+	return err;
+}
+
+static void savagefb_remove(struct pci_dev *dev)
+{
+	struct fb_info *info = pci_get_drvdata(dev);
+
+	DBG("savagefb_remove");
+
+	if (info) {
+		unregister_framebuffer(info);
+
+#ifdef CONFIG_FB_SAVAGE_I2C
+		savagefb_delete_i2c_busses(info);
+#endif
+		fb_alloc_cmap(&info->cmap, 0, 0);
+		savage_unmap_video(info);
+		savage_unmap_mmio(info);
+		kfree(info->pixmap.addr);
+		pci_release_regions(dev);
+		framebuffer_release(info);
+	}
+}
+
+static int savagefb_suspend_late(struct device *dev, pm_message_t mesg)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct savagefb_par *par = info->par;
+
+	DBG("savagefb_suspend");
+
+	if (mesg.event == PM_EVENT_PRETHAW)
+		mesg.event = PM_EVENT_FREEZE;
+	par->pm_state = mesg.event;
+	dev->power.power_state = mesg;
+
+	/*
+	 * For PM_EVENT_FREEZE, do not power down so the console
+	 * can remain active.
+	 */
+	if (mesg.event == PM_EVENT_FREEZE)
+		return 0;
+
+	console_lock();
+	fb_set_suspend(info, 1);
+
+	if (info->fbops->fb_sync)
+		info->fbops->fb_sync(info);
+
+	savagefb_blank(FB_BLANK_POWERDOWN, info);
+	savage_set_default_par(par, &par->save);
+	savage_disable_mmio(par);
+	console_unlock();
+
+	return 0;
+}
+
+static int __maybe_unused savagefb_suspend(struct device *dev)
+{
+	return savagefb_suspend_late(dev, PMSG_SUSPEND);
+}
+
+static int __maybe_unused savagefb_hibernate(struct device *dev)
+{
+	return savagefb_suspend_late(dev, PMSG_HIBERNATE);
+}
+
+static int __maybe_unused savagefb_freeze(struct device *dev)
+{
+	return savagefb_suspend_late(dev, PMSG_FREEZE);
+}
+
+static int __maybe_unused savagefb_resume(struct device *dev)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct savagefb_par *par = info->par;
+	int cur_state = par->pm_state;
+
+	DBG("savage_resume");
+
+	par->pm_state = PM_EVENT_ON;
+
+	/*
+	 * The adapter was not powered down coming back from a
+	 * PM_EVENT_FREEZE.
+	 */
+	if (cur_state == PM_EVENT_FREEZE)
+		return 0;
+
+	console_lock();
+
+	savage_enable_mmio(par);
+	savage_init_hw(par);
+	savagefb_set_par(info);
+	fb_set_suspend(info, 0);
+	savagefb_blank(FB_BLANK_UNBLANK, info);
+	console_unlock();
+
+	return 0;
+}
+
+static const struct dev_pm_ops savagefb_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= savagefb_suspend,
+	.resume		= savagefb_resume,
+	.freeze		= savagefb_freeze,
+	.thaw		= savagefb_resume,
+	.poweroff	= savagefb_hibernate,
+	.restore	= savagefb_resume,
+#endif
+};
+
+static const struct pci_device_id savagefb_devices[] = {
+	{
+		PCI_VDEVICE(S3, PCI_CHIP_SUPSAV_MX128),
+		.driver_data = FB_ACCEL_SUPERSAVAGE,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SUPSAV_MX64),
+		.driver_data = FB_ACCEL_SUPERSAVAGE,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SUPSAV_MX64C),
+		.driver_data = FB_ACCEL_SUPERSAVAGE,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SUPSAV_IX128SDR),
+		.driver_data = FB_ACCEL_SUPERSAVAGE,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SUPSAV_IX128DDR),
+		.driver_data = FB_ACCEL_SUPERSAVAGE,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SUPSAV_IX64SDR),
+		.driver_data = FB_ACCEL_SUPERSAVAGE,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SUPSAV_IX64DDR),
+		.driver_data = FB_ACCEL_SUPERSAVAGE,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SUPSAV_IXCSDR),
+		.driver_data = FB_ACCEL_SUPERSAVAGE,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SUPSAV_IXCDDR),
+		.driver_data = FB_ACCEL_SUPERSAVAGE,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SAVAGE4),
+		.driver_data = FB_ACCEL_SAVAGE4,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SAVAGE3D),
+		.driver_data = FB_ACCEL_SAVAGE3D,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SAVAGE3D_MV),
+		.driver_data = FB_ACCEL_SAVAGE3D_MV,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SAVAGE2000),
+		.driver_data = FB_ACCEL_SAVAGE2000,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SAVAGE_MX_MV),
+		.driver_data = FB_ACCEL_SAVAGE_MX_MV,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SAVAGE_MX),
+		.driver_data = FB_ACCEL_SAVAGE_MX,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SAVAGE_IX_MV),
+		.driver_data = FB_ACCEL_SAVAGE_IX_MV,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_SAVAGE_IX),
+		.driver_data = FB_ACCEL_SAVAGE_IX,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_PROSAVAGE_PM),
+		.driver_data = FB_ACCEL_PROSAVAGE_PM,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_PROSAVAGE_KM),
+		.driver_data = FB_ACCEL_PROSAVAGE_KM,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_S3TWISTER_P),
+		.driver_data = FB_ACCEL_S3TWISTER_P,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_S3TWISTER_K),
+		.driver_data = FB_ACCEL_S3TWISTER_K,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_PROSAVAGE_DDR),
+		.driver_data = FB_ACCEL_PROSAVAGE_DDR,
+	}, {
+		PCI_VDEVICE(S3, PCI_CHIP_PROSAVAGE_DDRK),
+		.driver_data = FB_ACCEL_PROSAVAGE_DDRK,
+	},
+
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, savagefb_devices);
+
+static struct pci_driver savagefb_driver = {
+	.name =     "savagefb",
+	.id_table = savagefb_devices,
+	.probe =    savagefb_probe,
+	.driver.pm = &savagefb_pm_ops,
+	.remove =   savagefb_remove,
+};
+
+/* **************************** exit-time only **************************** */
+
+static void __exit savage_done(void)
+{
+	DBG("savage_done");
+	pci_unregister_driver(&savagefb_driver);
+}
+
+
+/* ************************* init in-kernel code ************************** */
+
+static int __init savagefb_setup(char *options)
+{
+#ifndef MODULE
+	char *this_opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		mode_option = this_opt;
+	}
+#endif /* !MODULE */
+	return 0;
+}
+
+static int __init savagefb_init(void)
+{
+	char *option;
+
+	DBG("savagefb_init");
+
+	if (fb_modesetting_disabled("savagefb"))
+		return -ENODEV;
+
+	if (fb_get_options("savagefb", &option))
+		return -ENODEV;
+
+	savagefb_setup(option);
+	return pci_register_driver(&savagefb_driver);
+
+}
+
+module_init(savagefb_init);
+module_exit(savage_done);
+
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Specify initial video mode");
-- 
cgit v1.3.1