From a5bde5d8fde8a8cb28e59a672d5ddc5b9c1e7656 Mon Sep 17 00:00:00 2001
From: Breno Leitao <leitao@debian.org>
Date: Wed, 5 Aug 2026 07:52:36 -0700
Subject: workqueue: skip the node_nr_active update for non-unbound workqueues

apply_wqattrs_commit() updates node_nr_active->max unconditionally.
wq->node_nr_active[] is only allocated for unbound workqueues, so guard
the call before per-cpu workqueues start using this path.

No functional change: only unbound workqueues reach apply_wqattrs_*()
today.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/video/fbdev/pxafb.c | 2440 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 2440 insertions(+)
 create mode 100644 drivers/video/fbdev/pxafb.c

(limited to 'drivers/video/fbdev/pxafb.c')

diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
new file mode 100644
index 000000000..e418eee82
--- /dev/null
+++ b/drivers/video/fbdev/pxafb.c
@@ -0,0 +1,2440 @@
+/*
+ *  linux/drivers/video/pxafb.c
+ *
+ *  Copyright (C) 1999 Eric A. Thomas.
+ *  Copyright (C) 2004 Jean-Frederic Clere.
+ *  Copyright (C) 2004 Ian Campbell.
+ *  Copyright (C) 2004 Jeff Lackey.
+ *   Based on sa1100fb.c Copyright (C) 1999 Eric A. Thomas
+ *  which in turn is
+ *   Based on acornfb.c Copyright (C) Russell King.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ *	        Intel PXA250/210 LCD Controller Frame Buffer Driver
+ *
+ * Please direct your questions and comments on this driver to the following
+ * email address:
+ *
+ *	linux-arm-kernel@lists.arm.linux.org.uk
+ *
+ * Add support for overlay1 and overlay2 based on pxafb_overlay.c:
+ *
+ *   Copyright (C) 2004, Intel Corporation
+ *
+ *     2003/08/27: <yu.tang@intel.com>
+ *     2004/03/10: <stanley.cai@intel.com>
+ *     2004/10/28: <yan.yin@intel.com>
+ *
+ *   Copyright (C) 2006-2008 Marvell International Ltd.
+ *   All Rights Reserved
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/console.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+#include <linux/soc/pxa/cpu.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+#include <linux/string_choices.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <linux/platform_data/video-pxafb.h>
+
+/*
+ * Complain if VAR is out of range.
+ */
+#define DEBUG_VAR 1
+
+#include "pxafb.h"
+#include "pxa3xx-regs.h"
+
+/* Bits which should not be set in machine configuration structures */
+#define LCCR0_INVALID_CONFIG_MASK	(LCCR0_OUM | LCCR0_BM | LCCR0_QDM |\
+					 LCCR0_DIS | LCCR0_EFM | LCCR0_IUM |\
+					 LCCR0_SFM | LCCR0_LDM | LCCR0_ENB)
+
+#define LCCR3_INVALID_CONFIG_MASK	(LCCR3_HSP | LCCR3_VSP |\
+					 LCCR3_PCD | LCCR3_BPP(0xf))
+
+static int pxafb_activate_var(struct fb_var_screeninfo *var,
+				struct pxafb_info *);
+static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
+static void setup_base_frame(struct pxafb_info *fbi,
+                             struct fb_var_screeninfo *var, int branch);
+static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
+			   unsigned long offset, size_t size);
+
+static unsigned long video_mem_size = 0;
+
+static inline unsigned long
+lcd_readl(struct pxafb_info *fbi, unsigned int off)
+{
+	return __raw_readl(fbi->mmio_base + off);
+}
+
+static inline void
+lcd_writel(struct pxafb_info *fbi, unsigned int off, unsigned long val)
+{
+	__raw_writel(val, fbi->mmio_base + off);
+}
+
+static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	/*
+	 * We need to handle two requests being made at the same time.
+	 * There are two important cases:
+	 *  1. When we are changing VT (C_REENABLE) while unblanking
+	 *     (C_ENABLE) We must perform the unblanking, which will
+	 *     do our REENABLE for us.
+	 *  2. When we are blanking, but immediately unblank before
+	 *     we have blanked.  We do the "REENABLE" thing here as
+	 *     well, just to be sure.
+	 */
+	if (fbi->task_state == C_ENABLE && state == C_REENABLE)
+		state = (u_int) -1;
+	if (fbi->task_state == C_DISABLE && state == C_ENABLE)
+		state = C_REENABLE;
+
+	if (state != (u_int)-1) {
+		fbi->task_state = state;
+		schedule_work(&fbi->task);
+	}
+	local_irq_restore(flags);
+}
+
+static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int
+pxafb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
+		       u_int trans, struct fb_info *info)
+{
+	struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
+	u_int val;
+
+	if (regno >= fbi->palette_size)
+		return 1;
+
+	if (fbi->fb.var.grayscale) {
+		fbi->palette_cpu[regno] = ((blue >> 8) & 0x00ff);
+		return 0;
+	}
+
+	switch (fbi->lccr4 & LCCR4_PAL_FOR_MASK) {
+	case LCCR4_PAL_FOR_0:
+		val  = ((red   >>  0) & 0xf800);
+		val |= ((green >>  5) & 0x07e0);
+		val |= ((blue  >> 11) & 0x001f);
+		fbi->palette_cpu[regno] = val;
+		break;
+	case LCCR4_PAL_FOR_1:
+		val  = ((red   << 8) & 0x00f80000);
+		val |= ((green >> 0) & 0x0000fc00);
+		val |= ((blue  >> 8) & 0x000000f8);
+		((u32 *)(fbi->palette_cpu))[regno] = val;
+		break;
+	case LCCR4_PAL_FOR_2:
+		val  = ((red   << 8) & 0x00fc0000);
+		val |= ((green >> 0) & 0x0000fc00);
+		val |= ((blue  >> 8) & 0x000000fc);
+		((u32 *)(fbi->palette_cpu))[regno] = val;
+		break;
+	case LCCR4_PAL_FOR_3:
+		val  = ((red   << 8) & 0x00ff0000);
+		val |= ((green >> 0) & 0x0000ff00);
+		val |= ((blue  >> 8) & 0x000000ff);
+		((u32 *)(fbi->palette_cpu))[regno] = val;
+		break;
+	}
+
+	return 0;
+}
+
+static int
+pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+		   u_int trans, struct fb_info *info)
+{
+	struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
+	unsigned int val;
+	int ret = 1;
+
+	/*
+	 * If inverse mode was selected, invert all the colours
+	 * rather than the register number.  The register number
+	 * is what you poke into the framebuffer to produce the
+	 * colour you requested.
+	 */
+	if (fbi->cmap_inverse) {
+		red   = 0xffff - red;
+		green = 0xffff - green;
+		blue  = 0xffff - blue;
+	}
+
+	/*
+	 * If greyscale is true, then we convert the RGB value
+	 * to greyscale no matter what visual we are using.
+	 */
+	if (fbi->fb.var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green +
+					7471 * blue) >> 16;
+
+	switch (fbi->fb.fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		/*
+		 * 16-bit True Colour.  We encode the RGB value
+		 * according to the RGB bitfield information.
+		 */
+		if (regno < 16) {
+			u32 *pal = fbi->fb.pseudo_palette;
+
+			val  = chan_to_field(red, &fbi->fb.var.red);
+			val |= chan_to_field(green, &fbi->fb.var.green);
+			val |= chan_to_field(blue, &fbi->fb.var.blue);
+
+			pal[regno] = val;
+			ret = 0;
+		}
+		break;
+
+	case FB_VISUAL_STATIC_PSEUDOCOLOR:
+	case FB_VISUAL_PSEUDOCOLOR:
+		ret = pxafb_setpalettereg(regno, red, green, blue, trans, info);
+		break;
+	}
+
+	return ret;
+}
+
+/* calculate pixel depth, transparency bit included, >=16bpp formats _only_ */
+static inline int var_to_depth(struct fb_var_screeninfo *var)
+{
+	return var->red.length + var->green.length +
+		var->blue.length + var->transp.length;
+}
+
+/* calculate 4-bit BPP value for LCCR3 and OVLxC1 */
+static int pxafb_var_to_bpp(struct fb_var_screeninfo *var)
+{
+	int bpp = -EINVAL;
+
+	switch (var->bits_per_pixel) {
+	case 1:  bpp = 0; break;
+	case 2:  bpp = 1; break;
+	case 4:  bpp = 2; break;
+	case 8:  bpp = 3; break;
+	case 16: bpp = 4; break;
+	case 24:
+		switch (var_to_depth(var)) {
+		case 18: bpp = 6; break; /* 18-bits/pixel packed */
+		case 19: bpp = 8; break; /* 19-bits/pixel packed */
+		case 24: bpp = 9; break;
+		}
+		break;
+	case 32:
+		switch (var_to_depth(var)) {
+		case 18: bpp = 5; break; /* 18-bits/pixel unpacked */
+		case 19: bpp = 7; break; /* 19-bits/pixel unpacked */
+		case 25: bpp = 10; break;
+		}
+		break;
+	}
+	return bpp;
+}
+
+/*
+ *  pxafb_var_to_lccr3():
+ *    Convert a bits per pixel value to the correct bit pattern for LCCR3
+ *
+ *  NOTE: for PXA27x with overlays support, the LCCR3_PDFOR_x bits have an
+ *  implication of the acutal use of transparency bit,  which we handle it
+ *  here separatedly. See PXA27x Developer's Manual, Section <<7.4.6 Pixel
+ *  Formats>> for the valid combination of PDFOR, PAL_FOR for various BPP.
+ *
+ *  Transparency for palette pixel formats is not supported at the moment.
+ */
+static uint32_t pxafb_var_to_lccr3(struct fb_var_screeninfo *var)
+{
+	int bpp = pxafb_var_to_bpp(var);
+	uint32_t lccr3;
+
+	if (bpp < 0)
+		return 0;
+
+	lccr3 = LCCR3_BPP(bpp);
+
+	switch (var_to_depth(var)) {
+	case 16: lccr3 |= var->transp.length ? LCCR3_PDFOR_3 : 0; break;
+	case 18: lccr3 |= LCCR3_PDFOR_3; break;
+	case 24: lccr3 |= var->transp.length ? LCCR3_PDFOR_2 : LCCR3_PDFOR_3;
+		 break;
+	case 19:
+	case 25: lccr3 |= LCCR3_PDFOR_0; break;
+	}
+	return lccr3;
+}
+
+#define SET_PIXFMT(v, r, g, b, t)				\
+({								\
+	(v)->transp.offset = (t) ? (r) + (g) + (b) : 0;		\
+	(v)->transp.length = (t) ? (t) : 0;			\
+	(v)->blue.length   = (b); (v)->blue.offset = 0;		\
+	(v)->green.length  = (g); (v)->green.offset = (b);	\
+	(v)->red.length    = (r); (v)->red.offset = (b) + (g);	\
+})
+
+/* set the RGBT bitfields of fb_var_screeninf according to
+ * var->bits_per_pixel and given depth
+ */
+static void pxafb_set_pixfmt(struct fb_var_screeninfo *var, int depth)
+{
+	if (depth == 0)
+		depth = var->bits_per_pixel;
+
+	if (var->bits_per_pixel < 16) {
+		/* indexed pixel formats */
+		var->red.offset    = 0; var->red.length    = 8;
+		var->green.offset  = 0; var->green.length  = 8;
+		var->blue.offset   = 0; var->blue.length   = 8;
+		var->transp.offset = 0; var->transp.length = 8;
+	}
+
+	switch (depth) {
+	case 16: var->transp.length ?
+		 SET_PIXFMT(var, 5, 5, 5, 1) :		/* RGBT555 */
+		 SET_PIXFMT(var, 5, 6, 5, 0); break;	/* RGB565 */
+	case 18: SET_PIXFMT(var, 6, 6, 6, 0); break;	/* RGB666 */
+	case 19: SET_PIXFMT(var, 6, 6, 6, 1); break;	/* RGBT666 */
+	case 24: var->transp.length ?
+		 SET_PIXFMT(var, 8, 8, 7, 1) :		/* RGBT887 */
+		 SET_PIXFMT(var, 8, 8, 8, 0); break;	/* RGB888 */
+	case 25: SET_PIXFMT(var, 8, 8, 8, 1); break;	/* RGBT888 */
+	}
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ *  pxafb_display_dma_period()
+ *    Calculate the minimum period (in picoseconds) between two DMA
+ *    requests for the LCD controller.  If we hit this, it means we're
+ *    doing nothing but LCD DMA.
+ */
+static unsigned int pxafb_display_dma_period(struct fb_var_screeninfo *var)
+{
+	/*
+	 * Period = pixclock * bits_per_byte * bytes_per_transfer
+	 *              / memory_bits_per_pixel;
+	 */
+	return var->pixclock * 8 * 16 / var->bits_per_pixel;
+}
+#endif
+
+/*
+ * Select the smallest mode that allows the desired resolution to be
+ * displayed. If desired parameters can be rounded up.
+ */
+static struct pxafb_mode_info *pxafb_getmode(struct pxafb_mach_info *mach,
+					     struct fb_var_screeninfo *var)
+{
+	struct pxafb_mode_info *mode = NULL;
+	struct pxafb_mode_info *modelist = mach->modes;
+	unsigned int best_x = 0xffffffff, best_y = 0xffffffff;
+	unsigned int i;
+
+	for (i = 0; i < mach->num_modes; i++) {
+		if (modelist[i].xres >= var->xres &&
+		    modelist[i].yres >= var->yres &&
+		    modelist[i].xres < best_x &&
+		    modelist[i].yres < best_y &&
+		    modelist[i].bpp >= var->bits_per_pixel) {
+			best_x = modelist[i].xres;
+			best_y = modelist[i].yres;
+			mode = &modelist[i];
+		}
+	}
+
+	return mode;
+}
+
+static void pxafb_setmode(struct fb_var_screeninfo *var,
+			  struct pxafb_mode_info *mode)
+{
+	var->xres		= mode->xres;
+	var->yres		= mode->yres;
+	var->bits_per_pixel	= mode->bpp;
+	var->pixclock		= mode->pixclock;
+	var->hsync_len		= mode->hsync_len;
+	var->left_margin	= mode->left_margin;
+	var->right_margin	= mode->right_margin;
+	var->vsync_len		= mode->vsync_len;
+	var->upper_margin	= mode->upper_margin;
+	var->lower_margin	= mode->lower_margin;
+	var->sync		= mode->sync;
+	var->grayscale		= mode->cmap_greyscale;
+	var->transp.length	= mode->transparency;
+
+	/* set the initial RGBA bitfields */
+	pxafb_set_pixfmt(var, mode->depth);
+}
+
+static int pxafb_adjust_timing(struct pxafb_info *fbi,
+			       struct fb_var_screeninfo *var)
+{
+	int line_length;
+
+	var->xres = max_t(int, var->xres, MIN_XRES);
+	var->yres = max_t(int, var->yres, MIN_YRES);
+
+	if (!(fbi->lccr0 & LCCR0_LCDT)) {
+		var->hsync_len = clamp(var->hsync_len, 1, 64);
+		var->vsync_len = clamp(var->vsync_len, 1, 64);
+		var->left_margin  = clamp(var->left_margin,  1, 255);
+		var->right_margin = clamp(var->right_margin, 1, 255);
+		var->upper_margin = clamp(var->upper_margin, 1, 255);
+		var->lower_margin = clamp(var->lower_margin, 1, 255);
+	}
+
+	/* make sure each line is aligned on word boundary */
+	line_length = var->xres * var->bits_per_pixel / 8;
+	line_length = ALIGN(line_length, 4);
+	var->xres = line_length * 8 / var->bits_per_pixel;
+
+	/* we don't support xpan, force xres_virtual to be equal to xres */
+	var->xres_virtual = var->xres;
+
+	if (var->accel_flags & FB_ACCELF_TEXT)
+		var->yres_virtual = fbi->fb.fix.smem_len / line_length;
+	else
+		var->yres_virtual = max(var->yres_virtual, var->yres);
+
+	/* check for limits */
+	if (var->xres > MAX_XRES || var->yres > MAX_YRES)
+		return -EINVAL;
+
+	if (var->yres > var->yres_virtual)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ *  pxafb_check_var():
+ *    Get the video params out of 'var'. If a value doesn't fit, round it up,
+ *    if it's too big, return -EINVAL.
+ *
+ *    Round up in the following order: bits_per_pixel, xres,
+ *    yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
+ *    bitfields, horizontal timing, vertical timing.
+ */
+static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
+	struct pxafb_mach_info *inf = fbi->inf;
+	int err;
+
+	if (inf->fixed_modes) {
+		struct pxafb_mode_info *mode;
+
+		mode = pxafb_getmode(inf, var);
+		if (!mode)
+			return -EINVAL;
+		pxafb_setmode(var, mode);
+	}
+
+	/* do a test conversion to BPP fields to check the color formats */
+	err = pxafb_var_to_bpp(var);
+	if (err < 0)
+		return err;
+
+	pxafb_set_pixfmt(var, var_to_depth(var));
+
+	err = pxafb_adjust_timing(fbi, var);
+	if (err)
+		return err;
+
+#ifdef CONFIG_CPU_FREQ
+	pr_debug("pxafb: dma period = %d ps\n",
+		 pxafb_display_dma_period(var));
+#endif
+
+	return 0;
+}
+
+/*
+ * pxafb_set_par():
+ *	Set the user defined part of the display for the specified console
+ */
+static int pxafb_set_par(struct fb_info *info)
+{
+	struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
+	struct fb_var_screeninfo *var = &info->var;
+
+	if (var->bits_per_pixel >= 16)
+		fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+	else if (!fbi->cmap_static)
+		fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else {
+		/*
+		 * Some people have weird ideas about wanting static
+		 * pseudocolor maps.  I suspect their user space
+		 * applications are broken.
+		 */
+		fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
+	}
+
+	fbi->fb.fix.line_length = var->xres_virtual *
+				  var->bits_per_pixel / 8;
+	if (var->bits_per_pixel >= 16)
+		fbi->palette_size = 0;
+	else
+		fbi->palette_size = var->bits_per_pixel == 1 ?
+					4 : 1 << var->bits_per_pixel;
+
+	fbi->palette_cpu = (u16 *)&fbi->dma_buff->palette[0];
+
+	if (fbi->fb.var.bits_per_pixel >= 16)
+		fb_dealloc_cmap(&fbi->fb.cmap);
+	else
+		fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0);
+
+	pxafb_activate_var(var, fbi);
+
+	return 0;
+}
+
+static int pxafb_pan_display(struct fb_var_screeninfo *var,
+			     struct fb_info *info)
+{
+	struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
+	struct fb_var_screeninfo newvar;
+	int dma = DMA_MAX + DMA_BASE;
+
+	if (fbi->state != C_ENABLE)
+		return 0;
+
+	/* Only take .xoffset, .yoffset and .vmode & FB_VMODE_YWRAP from what
+	 * was passed in and copy the rest from the old screeninfo.
+	 */
+	memcpy(&newvar, &fbi->fb.var, sizeof(newvar));
+	newvar.xoffset = var->xoffset;
+	newvar.yoffset = var->yoffset;
+	newvar.vmode &= ~FB_VMODE_YWRAP;
+	newvar.vmode |= var->vmode & FB_VMODE_YWRAP;
+
+	setup_base_frame(fbi, &newvar, 1);
+
+	if (fbi->lccr0 & LCCR0_SDS)
+		lcd_writel(fbi, FBR1, fbi->fdadr[dma + 1] | 0x1);
+
+	lcd_writel(fbi, FBR0, fbi->fdadr[dma] | 0x1);
+	return 0;
+}
+
+/*
+ * pxafb_blank():
+ *	Blank the display by setting all palette values to zero.  Note, the
+ * 	16 bpp mode does not really use the palette, so this will not
+ *      blank the display in all modes.
+ */
+static int pxafb_blank(int blank, struct fb_info *info)
+{
+	struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
+	int i;
+
+	switch (blank) {
+	case FB_BLANK_POWERDOWN:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_NORMAL:
+		if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
+		    fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
+			for (i = 0; i < fbi->palette_size; i++)
+				pxafb_setpalettereg(i, 0, 0, 0, 0, info);
+
+		pxafb_schedule_work(fbi, C_DISABLE);
+		/* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */
+		break;
+
+	case FB_BLANK_UNBLANK:
+		/* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */
+		if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
+		    fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
+			fb_set_cmap(&fbi->fb.cmap, info);
+		pxafb_schedule_work(fbi, C_ENABLE);
+	}
+	return 0;
+}
+
+static const struct fb_ops pxafb_ops = {
+	.owner		= THIS_MODULE,
+	FB_DEFAULT_IOMEM_OPS,
+	.fb_check_var	= pxafb_check_var,
+	.fb_set_par	= pxafb_set_par,
+	.fb_pan_display	= pxafb_pan_display,
+	.fb_setcolreg	= pxafb_setcolreg,
+	.fb_blank	= pxafb_blank,
+};
+
+#ifdef CONFIG_FB_PXA_OVERLAY
+static void overlay1fb_setup(struct pxafb_layer *ofb)
+{
+	int size = ofb->fb.fix.line_length * ofb->fb.var.yres_virtual;
+	unsigned long start = ofb->video_mem_phys;
+	setup_frame_dma(ofb->fbi, DMA_OV1, PAL_NONE, start, size);
+}
+
+/* Depending on the enable status of overlay1/2, the DMA should be
+ * updated from FDADRx (when disabled) or FBRx (when enabled).
+ */
+static void overlay1fb_enable(struct pxafb_layer *ofb)
+{
+	int enabled = lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN;
+	uint32_t fdadr1 = ofb->fbi->fdadr[DMA_OV1] | (enabled ? 0x1 : 0);
+
+	lcd_writel(ofb->fbi, enabled ? FBR1 : FDADR1, fdadr1);
+	lcd_writel(ofb->fbi, OVL1C2, ofb->control[1]);
+	lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] | OVLxC1_OEN);
+}
+
+static void overlay1fb_disable(struct pxafb_layer *ofb)
+{
+	uint32_t lccr5;
+
+	if (!(lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN))
+		return;
+
+	lccr5 = lcd_readl(ofb->fbi, LCCR5);
+
+	lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] & ~OVLxC1_OEN);
+
+	lcd_writel(ofb->fbi, LCSR1, LCSR1_BS(1));
+	lcd_writel(ofb->fbi, LCCR5, lccr5 & ~LCSR1_BS(1));
+	lcd_writel(ofb->fbi, FBR1, ofb->fbi->fdadr[DMA_OV1] | 0x3);
+
+	if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0)
+		pr_warn("%s: timeout disabling overlay1\n", __func__);
+
+	lcd_writel(ofb->fbi, LCCR5, lccr5);
+}
+
+static void overlay2fb_setup(struct pxafb_layer *ofb)
+{
+	int size, div = 1, pfor = NONSTD_TO_PFOR(ofb->fb.var.nonstd);
+	unsigned long start[3] = { ofb->video_mem_phys, 0, 0 };
+
+	if (pfor == OVERLAY_FORMAT_RGB || pfor == OVERLAY_FORMAT_YUV444_PACKED) {
+		size = ofb->fb.fix.line_length * ofb->fb.var.yres_virtual;
+		setup_frame_dma(ofb->fbi, DMA_OV2_Y, -1, start[0], size);
+	} else {
+		size = ofb->fb.var.xres_virtual * ofb->fb.var.yres_virtual;
+		switch (pfor) {
+		case OVERLAY_FORMAT_YUV444_PLANAR: div = 1; break;
+		case OVERLAY_FORMAT_YUV422_PLANAR: div = 2; break;
+		case OVERLAY_FORMAT_YUV420_PLANAR: div = 4; break;
+		}
+		start[1] = start[0] + size;
+		start[2] = start[1] + size / div;
+		setup_frame_dma(ofb->fbi, DMA_OV2_Y,  -1, start[0], size);
+		setup_frame_dma(ofb->fbi, DMA_OV2_Cb, -1, start[1], size / div);
+		setup_frame_dma(ofb->fbi, DMA_OV2_Cr, -1, start[2], size / div);
+	}
+}
+
+static void overlay2fb_enable(struct pxafb_layer *ofb)
+{
+	int pfor = NONSTD_TO_PFOR(ofb->fb.var.nonstd);
+	int enabled = lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN;
+	uint32_t fdadr2 = ofb->fbi->fdadr[DMA_OV2_Y]  | (enabled ? 0x1 : 0);
+	uint32_t fdadr3 = ofb->fbi->fdadr[DMA_OV2_Cb] | (enabled ? 0x1 : 0);
+	uint32_t fdadr4 = ofb->fbi->fdadr[DMA_OV2_Cr] | (enabled ? 0x1 : 0);
+
+	if (pfor == OVERLAY_FORMAT_RGB || pfor == OVERLAY_FORMAT_YUV444_PACKED)
+		lcd_writel(ofb->fbi, enabled ? FBR2 : FDADR2, fdadr2);
+	else {
+		lcd_writel(ofb->fbi, enabled ? FBR2 : FDADR2, fdadr2);
+		lcd_writel(ofb->fbi, enabled ? FBR3 : FDADR3, fdadr3);
+		lcd_writel(ofb->fbi, enabled ? FBR4 : FDADR4, fdadr4);
+	}
+	lcd_writel(ofb->fbi, OVL2C2, ofb->control[1]);
+	lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] | OVLxC1_OEN);
+}
+
+static void overlay2fb_disable(struct pxafb_layer *ofb)
+{
+	uint32_t lccr5;
+
+	if (!(lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN))
+		return;
+
+	lccr5 = lcd_readl(ofb->fbi, LCCR5);
+
+	lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] & ~OVLxC1_OEN);
+
+	lcd_writel(ofb->fbi, LCSR1, LCSR1_BS(2));
+	lcd_writel(ofb->fbi, LCCR5, lccr5 & ~LCSR1_BS(2));
+	lcd_writel(ofb->fbi, FBR2, ofb->fbi->fdadr[DMA_OV2_Y]  | 0x3);
+	lcd_writel(ofb->fbi, FBR3, ofb->fbi->fdadr[DMA_OV2_Cb] | 0x3);
+	lcd_writel(ofb->fbi, FBR4, ofb->fbi->fdadr[DMA_OV2_Cr] | 0x3);
+
+	if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0)
+		pr_warn("%s: timeout disabling overlay2\n", __func__);
+}
+
+static struct pxafb_layer_ops ofb_ops[] = {
+	[0] = {
+		.enable		= overlay1fb_enable,
+		.disable	= overlay1fb_disable,
+		.setup		= overlay1fb_setup,
+	},
+	[1] = {
+		.enable		= overlay2fb_enable,
+		.disable	= overlay2fb_disable,
+		.setup		= overlay2fb_setup,
+	},
+};
+
+static int overlayfb_open(struct fb_info *info, int user)
+{
+	struct pxafb_layer *ofb = container_of(info, struct pxafb_layer, fb);
+
+	/* no support for framebuffer console on overlay */
+	if (user == 0)
+		return -ENODEV;
+
+	if (ofb->usage++ == 0) {
+		/* unblank the base framebuffer */
+		console_lock();
+		fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
+		console_unlock();
+	}
+
+	return 0;
+}
+
+static int overlayfb_release(struct fb_info *info, int user)
+{
+	struct pxafb_layer *ofb = container_of(info, struct pxafb_layer, fb);
+
+	if (ofb->usage == 1) {
+		ofb->ops->disable(ofb);
+		ofb->fb.var.height	= -1;
+		ofb->fb.var.width	= -1;
+		ofb->fb.var.xres = ofb->fb.var.xres_virtual = 0;
+		ofb->fb.var.yres = ofb->fb.var.yres_virtual = 0;
+
+		ofb->usage--;
+	}
+	return 0;
+}
+
+static int overlayfb_check_var(struct fb_var_screeninfo *var,
+			       struct fb_info *info)
+{
+	struct pxafb_layer *ofb = container_of(info, struct pxafb_layer, fb);
+	struct fb_var_screeninfo *base_var = &ofb->fbi->fb.var;
+	int xpos, ypos, pfor, bpp;
+
+	xpos = NONSTD_TO_XPOS(var->nonstd);
+	ypos = NONSTD_TO_YPOS(var->nonstd);
+	pfor = NONSTD_TO_PFOR(var->nonstd);
+
+	bpp = pxafb_var_to_bpp(var);
+	if (bpp < 0)
+		return -EINVAL;
+
+	/* no support for YUV format on overlay1 */
+	if (ofb->id == OVERLAY1 && pfor != 0)
+		return -EINVAL;
+
+	/* for YUV packed formats, bpp = 'minimum bpp of YUV components' */
+	switch (pfor) {
+	case OVERLAY_FORMAT_RGB:
+		bpp = pxafb_var_to_bpp(var);
+		if (bpp < 0)
+			return -EINVAL;
+
+		pxafb_set_pixfmt(var, var_to_depth(var));
+		break;
+	case OVERLAY_FORMAT_YUV444_PACKED: bpp = 24; break;
+	case OVERLAY_FORMAT_YUV444_PLANAR: bpp = 8; break;
+	case OVERLAY_FORMAT_YUV422_PLANAR: bpp = 4; break;
+	case OVERLAY_FORMAT_YUV420_PLANAR: bpp = 2; break;
+	default:
+		return -EINVAL;
+	}
+
+	/* each line must start at a 32-bit word boundary */
+	if ((xpos * bpp) % 32)
+		return -EINVAL;
+
+	/* xres must align on 32-bit word boundary */
+	var->xres = roundup(var->xres * bpp, 32) / bpp;
+
+	if ((xpos + var->xres > base_var->xres) ||
+	    (ypos + var->yres > base_var->yres))
+		return -EINVAL;
+
+	var->xres_virtual = var->xres;
+	var->yres_virtual = max(var->yres, var->yres_virtual);
+	return 0;
+}
+
+static int overlayfb_check_video_memory(struct pxafb_layer *ofb)
+{
+	struct fb_var_screeninfo *var = &ofb->fb.var;
+	int pfor = NONSTD_TO_PFOR(var->nonstd);
+	int size, bpp = 0;
+
+	switch (pfor) {
+	case OVERLAY_FORMAT_RGB: bpp = var->bits_per_pixel; break;
+	case OVERLAY_FORMAT_YUV444_PACKED: bpp = 24; break;
+	case OVERLAY_FORMAT_YUV444_PLANAR: bpp = 24; break;
+	case OVERLAY_FORMAT_YUV422_PLANAR: bpp = 16; break;
+	case OVERLAY_FORMAT_YUV420_PLANAR: bpp = 12; break;
+	}
+
+	ofb->fb.fix.line_length = var->xres_virtual * bpp / 8;
+
+	size = PAGE_ALIGN(ofb->fb.fix.line_length * var->yres_virtual);
+
+	if (ofb->video_mem) {
+		if (ofb->video_mem_size >= size)
+			return 0;
+	}
+	return -EINVAL;
+}
+
+static int overlayfb_set_par(struct fb_info *info)
+{
+	struct pxafb_layer *ofb = container_of(info, struct pxafb_layer, fb);
+	struct fb_var_screeninfo *var = &info->var;
+	int xpos, ypos, pfor, bpp, ret;
+
+	ret = overlayfb_check_video_memory(ofb);
+	if (ret)
+		return ret;
+
+	bpp  = pxafb_var_to_bpp(var);
+	xpos = NONSTD_TO_XPOS(var->nonstd);
+	ypos = NONSTD_TO_YPOS(var->nonstd);
+	pfor = NONSTD_TO_PFOR(var->nonstd);
+
+	ofb->control[0] = OVLxC1_PPL(var->xres) | OVLxC1_LPO(var->yres) |
+			  OVLxC1_BPP(bpp);
+	ofb->control[1] = OVLxC2_XPOS(xpos) | OVLxC2_YPOS(ypos);
+
+	if (ofb->id == OVERLAY2)
+		ofb->control[1] |= OVL2C2_PFOR(pfor);
+
+	ofb->ops->setup(ofb);
+	ofb->ops->enable(ofb);
+	return 0;
+}
+
+static const struct fb_ops overlay_fb_ops = {
+	.owner			= THIS_MODULE,
+	.fb_open		= overlayfb_open,
+	.fb_release		= overlayfb_release,
+	.fb_check_var 		= overlayfb_check_var,
+	.fb_set_par		= overlayfb_set_par,
+};
+
+static void init_pxafb_overlay(struct pxafb_info *fbi, struct pxafb_layer *ofb,
+			       int id)
+{
+	sprintf(ofb->fb.fix.id, "overlay%d", id + 1);
+
+	ofb->fb.fix.type		= FB_TYPE_PACKED_PIXELS;
+	ofb->fb.fix.xpanstep		= 0;
+	ofb->fb.fix.ypanstep		= 1;
+
+	ofb->fb.var.activate		= FB_ACTIVATE_NOW;
+	ofb->fb.var.height		= -1;
+	ofb->fb.var.width		= -1;
+	ofb->fb.var.vmode		= FB_VMODE_NONINTERLACED;
+
+	ofb->fb.fbops			= &overlay_fb_ops;
+	ofb->fb.node			= -1;
+	ofb->fb.pseudo_palette		= NULL;
+
+	ofb->id = id;
+	ofb->ops = &ofb_ops[id];
+	ofb->usage = 0;
+	ofb->fbi = fbi;
+	init_completion(&ofb->branch_done);
+}
+
+static inline int pxafb_overlay_supported(void)
+{
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx())
+		return 1;
+
+	return 0;
+}
+
+static int pxafb_overlay_map_video_memory(struct pxafb_info *pxafb,
+					  struct pxafb_layer *ofb)
+{
+	/* We assume that user will use at most video_mem_size for overlay fb,
+	 * anyway, it's useless to use 16bpp main plane and 24bpp overlay
+	 */
+	ofb->video_mem = alloc_pages_exact(PAGE_ALIGN(pxafb->video_mem_size),
+		GFP_KERNEL | __GFP_ZERO);
+	if (ofb->video_mem == NULL)
+		return -ENOMEM;
+
+	ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
+	ofb->video_mem_size = PAGE_ALIGN(pxafb->video_mem_size);
+
+	mutex_lock(&ofb->fb.mm_lock);
+	ofb->fb.fix.smem_start	= ofb->video_mem_phys;
+	ofb->fb.fix.smem_len	= pxafb->video_mem_size;
+	mutex_unlock(&ofb->fb.mm_lock);
+
+	ofb->fb.screen_base	= ofb->video_mem;
+
+	return 0;
+}
+
+static void pxafb_overlay_init(struct pxafb_info *fbi)
+{
+	int i, ret;
+
+	if (!pxafb_overlay_supported())
+		return;
+
+	for (i = 0; i < 2; i++) {
+		struct pxafb_layer *ofb = &fbi->overlay[i];
+		init_pxafb_overlay(fbi, ofb, i);
+		ret = register_framebuffer(&ofb->fb);
+		if (ret) {
+			dev_err(fbi->dev, "failed to register overlay %d\n", i);
+			continue;
+		}
+		ret = pxafb_overlay_map_video_memory(fbi, ofb);
+		if (ret) {
+			dev_err(fbi->dev,
+				"failed to map video memory for overlay %d\n",
+				i);
+			unregister_framebuffer(&ofb->fb);
+			continue;
+		}
+		ofb->registered = 1;
+	}
+
+	/* mask all IU/BS/EOF/SOF interrupts */
+	lcd_writel(fbi, LCCR5, ~0);
+
+	pr_info("PXA Overlay driver loaded successfully!\n");
+}
+
+static void pxafb_overlay_exit(struct pxafb_info *fbi)
+{
+	int i;
+
+	if (!pxafb_overlay_supported())
+		return;
+
+	for (i = 0; i < 2; i++) {
+		struct pxafb_layer *ofb = &fbi->overlay[i];
+		if (ofb->registered) {
+			if (ofb->video_mem)
+				free_pages_exact(ofb->video_mem,
+					ofb->video_mem_size);
+			unregister_framebuffer(&ofb->fb);
+		}
+	}
+}
+#else
+static inline void pxafb_overlay_init(struct pxafb_info *fbi) {}
+static inline void pxafb_overlay_exit(struct pxafb_info *fbi) {}
+#endif /* CONFIG_FB_PXA_OVERLAY */
+
+/*
+ * Calculate the PCD value from the clock rate (in picoseconds).
+ * We take account of the PPCR clock setting.
+ * From PXA Developer's Manual:
+ *
+ *   PixelClock =      LCLK
+ *                -------------
+ *                2 ( PCD + 1 )
+ *
+ *   PCD =      LCLK
+ *         ------------- - 1
+ *         2(PixelClock)
+ *
+ * Where:
+ *   LCLK = LCD/Memory Clock
+ *   PCD = LCCR3[7:0]
+ *
+ * PixelClock here is in Hz while the pixclock argument given is the
+ * period in picoseconds. Hence PixelClock = 1 / ( pixclock * 10^-12 )
+ *
+ * The function get_lclk_frequency_10khz returns LCLK in units of
+ * 10khz. Calling the result of this function lclk gives us the
+ * following
+ *
+ *    PCD = (lclk * 10^4 ) * ( pixclock * 10^-12 )
+ *          -------------------------------------- - 1
+ *                          2
+ *
+ * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below.
+ */
+static inline unsigned int get_pcd(struct pxafb_info *fbi,
+				   unsigned int pixclock)
+{
+	unsigned long long pcd;
+
+	/* FIXME: Need to take into account Double Pixel Clock mode
+	 * (DPC) bit? or perhaps set it based on the various clock
+	 * speeds */
+	pcd = (unsigned long long)(clk_get_rate(fbi->clk) / 10000);
+	pcd *= pixclock;
+	do_div(pcd, 100000000 * 2);
+	/* no need for this, since we should subtract 1 anyway. they cancel */
+	/* pcd += 1; */ /* make up for integer math truncations */
+	return (unsigned int)pcd;
+}
+
+/*
+ * Some touchscreens need hsync information from the video driver to
+ * function correctly. We export it here.  Note that 'hsync_time' is
+ * the *reciprocal* of the hsync period in seconds.
+ */
+static inline void set_hsync_time(struct pxafb_info *fbi, unsigned int pcd)
+{
+	unsigned long htime;
+
+	if ((pcd == 0) || (fbi->fb.var.hsync_len == 0)) {
+		fbi->hsync_time = 0;
+		return;
+	}
+
+	htime = clk_get_rate(fbi->clk) / (pcd * fbi->fb.var.hsync_len);
+
+	fbi->hsync_time = htime;
+}
+
+static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
+			   unsigned long start, size_t size)
+{
+	struct pxafb_dma_descriptor *dma_desc, *pal_desc;
+	unsigned int dma_desc_off, pal_desc_off;
+
+	if (dma < 0 || dma >= DMA_MAX * 2)
+		return -EINVAL;
+
+	dma_desc = &fbi->dma_buff->dma_desc[dma];
+	dma_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[dma]);
+
+	dma_desc->fsadr = start;
+	dma_desc->fidr  = 0;
+	dma_desc->ldcmd = size;
+
+	if (pal < 0 || pal >= PAL_MAX * 2) {
+		dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off;
+		fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off;
+	} else {
+		pal_desc = &fbi->dma_buff->pal_desc[pal];
+		pal_desc_off = offsetof(struct pxafb_dma_buff, pal_desc[pal]);
+
+		pal_desc->fsadr = fbi->dma_buff_phys + pal * PALETTE_SIZE;
+		pal_desc->fidr  = 0;
+
+		if ((fbi->lccr4 & LCCR4_PAL_FOR_MASK) == LCCR4_PAL_FOR_0)
+			pal_desc->ldcmd = fbi->palette_size * sizeof(u16);
+		else
+			pal_desc->ldcmd = fbi->palette_size * sizeof(u32);
+
+		pal_desc->ldcmd |= LDCMD_PAL;
+
+		/* flip back and forth between palette and frame buffer */
+		pal_desc->fdadr = fbi->dma_buff_phys + dma_desc_off;
+		dma_desc->fdadr = fbi->dma_buff_phys + pal_desc_off;
+		fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off;
+	}
+
+	return 0;
+}
+
+static void setup_base_frame(struct pxafb_info *fbi,
+                             struct fb_var_screeninfo *var,
+                             int branch)
+{
+	struct fb_fix_screeninfo *fix = &fbi->fb.fix;
+	int nbytes, dma, pal, bpp = var->bits_per_pixel;
+	unsigned long offset;
+
+	dma = DMA_BASE + (branch ? DMA_MAX : 0);
+	pal = (bpp >= 16) ? PAL_NONE : PAL_BASE + (branch ? PAL_MAX : 0);
+
+	nbytes = fix->line_length * var->yres;
+	offset = fix->line_length * var->yoffset + fbi->video_mem_phys;
+
+	if (fbi->lccr0 & LCCR0_SDS) {
+		nbytes = nbytes / 2;
+		setup_frame_dma(fbi, dma + 1, PAL_NONE, offset + nbytes, nbytes);
+	}
+
+	setup_frame_dma(fbi, dma, pal, offset, nbytes);
+}
+
+#ifdef CONFIG_FB_PXA_SMARTPANEL
+static int setup_smart_dma(struct pxafb_info *fbi)
+{
+	struct pxafb_dma_descriptor *dma_desc;
+	unsigned long dma_desc_off, cmd_buff_off;
+
+	dma_desc = &fbi->dma_buff->dma_desc[DMA_CMD];
+	dma_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[DMA_CMD]);
+	cmd_buff_off = offsetof(struct pxafb_dma_buff, cmd_buff);
+
+	dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off;
+	dma_desc->fsadr = fbi->dma_buff_phys + cmd_buff_off;
+	dma_desc->fidr  = 0;
+	dma_desc->ldcmd = fbi->n_smart_cmds * sizeof(uint16_t);
+
+	fbi->fdadr[DMA_CMD] = dma_desc->fdadr;
+	return 0;
+}
+
+int pxafb_smart_flush(struct fb_info *info)
+{
+	struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
+	uint32_t prsr;
+	int ret = 0;
+
+	/* disable controller until all registers are set up */
+	lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
+
+	/* 1. make it an even number of commands to align on 32-bit boundary
+	 * 2. add the interrupt command to the end of the chain so we can
+	 *    keep track of the end of the transfer
+	 */
+
+	while (fbi->n_smart_cmds & 1)
+		fbi->smart_cmds[fbi->n_smart_cmds++] = SMART_CMD_NOOP;
+
+	fbi->smart_cmds[fbi->n_smart_cmds++] = SMART_CMD_INTERRUPT;
+	fbi->smart_cmds[fbi->n_smart_cmds++] = SMART_CMD_WAIT_FOR_VSYNC;
+	setup_smart_dma(fbi);
+
+	/* continue to execute next command */
+	prsr = lcd_readl(fbi, PRSR) | PRSR_ST_OK | PRSR_CON_NT;
+	lcd_writel(fbi, PRSR, prsr);
+
+	/* stop the processor in case it executed "wait for sync" cmd */
+	lcd_writel(fbi, CMDCR, 0x0001);
+
+	/* don't send interrupts for fifo underruns on channel 6 */
+	lcd_writel(fbi, LCCR5, LCCR5_IUM(6));
+
+	lcd_writel(fbi, LCCR1, fbi->reg_lccr1);
+	lcd_writel(fbi, LCCR2, fbi->reg_lccr2);
+	lcd_writel(fbi, LCCR3, fbi->reg_lccr3);
+	lcd_writel(fbi, LCCR4, fbi->reg_lccr4);
+	lcd_writel(fbi, FDADR0, fbi->fdadr[0]);
+	lcd_writel(fbi, FDADR6, fbi->fdadr[6]);
+
+	/* begin sending */
+	lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB);
+
+	if (wait_for_completion_timeout(&fbi->command_done, HZ/2) == 0) {
+		pr_warn("%s: timeout waiting for command done\n", __func__);
+		ret = -ETIMEDOUT;
+	}
+
+	/* quick disable */
+	prsr = lcd_readl(fbi, PRSR) & ~(PRSR_ST_OK | PRSR_CON_NT);
+	lcd_writel(fbi, PRSR, prsr);
+	lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
+	lcd_writel(fbi, FDADR6, 0);
+	fbi->n_smart_cmds = 0;
+	return ret;
+}
+
+int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int n_cmds)
+{
+	int i;
+	struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
+
+	for (i = 0; i < n_cmds; i++, cmds++) {
+		/* if it is a software delay, flush and delay */
+		if ((*cmds & 0xff00) == SMART_CMD_DELAY) {
+			pxafb_smart_flush(info);
+			mdelay(*cmds & 0xff);
+			continue;
+		}
+
+		/* leave 2 commands for INTERRUPT and WAIT_FOR_SYNC */
+		if (fbi->n_smart_cmds == CMD_BUFF_SIZE - 8)
+			pxafb_smart_flush(info);
+
+		fbi->smart_cmds[fbi->n_smart_cmds++] = *cmds;
+	}
+
+	return 0;
+}
+
+static unsigned int __smart_timing(unsigned time_ns, unsigned long lcd_clk)
+{
+	unsigned int t = (time_ns * (lcd_clk / 1000000) / 1000);
+	return (t == 0) ? 1 : t;
+}
+
+static void setup_smart_timing(struct pxafb_info *fbi,
+				struct fb_var_screeninfo *var)
+{
+	struct pxafb_mach_info *inf = fbi->inf;
+	struct pxafb_mode_info *mode = &inf->modes[0];
+	unsigned long lclk = clk_get_rate(fbi->clk);
+	unsigned t1, t2, t3, t4;
+
+	t1 = max(mode->a0csrd_set_hld, mode->a0cswr_set_hld);
+	t2 = max(mode->rd_pulse_width, mode->wr_pulse_width);
+	t3 = mode->op_hold_time;
+	t4 = mode->cmd_inh_time;
+
+	fbi->reg_lccr1 =
+		LCCR1_DisWdth(var->xres) |
+		LCCR1_BegLnDel(__smart_timing(t1, lclk)) |
+		LCCR1_EndLnDel(__smart_timing(t2, lclk)) |
+		LCCR1_HorSnchWdth(__smart_timing(t3, lclk));
+
+	fbi->reg_lccr2 = LCCR2_DisHght(var->yres);
+	fbi->reg_lccr3 = fbi->lccr3 | LCCR3_PixClkDiv(__smart_timing(t4, lclk));
+	fbi->reg_lccr3 |= (var->sync & FB_SYNC_HOR_HIGH_ACT) ? LCCR3_HSP : 0;
+	fbi->reg_lccr3 |= (var->sync & FB_SYNC_VERT_HIGH_ACT) ? LCCR3_VSP : 0;
+
+	/* FIXME: make this configurable */
+	fbi->reg_cmdcr = 1;
+}
+
+static int pxafb_smart_thread(void *arg)
+{
+	struct pxafb_info *fbi = arg;
+	struct pxafb_mach_info *inf = fbi->inf;
+
+	if (!inf->smart_update) {
+		pr_err("%s: not properly initialized, thread terminated\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	pr_debug("%s(): task starting\n", __func__);
+
+	set_freezable();
+	while (!kthread_should_stop()) {
+
+		if (try_to_freeze())
+			continue;
+
+		mutex_lock(&fbi->ctrlr_lock);
+
+		if (fbi->state == C_ENABLE) {
+			inf->smart_update(&fbi->fb);
+			complete(&fbi->refresh_done);
+		}
+
+		mutex_unlock(&fbi->ctrlr_lock);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(msecs_to_jiffies(30));
+	}
+
+	pr_debug("%s(): task ending\n", __func__);
+	return 0;
+}
+
+static int pxafb_smart_init(struct pxafb_info *fbi)
+{
+	if (!(fbi->lccr0 & LCCR0_LCDT))
+		return 0;
+
+	fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff;
+	fbi->n_smart_cmds = 0;
+
+	init_completion(&fbi->command_done);
+	init_completion(&fbi->refresh_done);
+
+	fbi->smart_thread = kthread_run(pxafb_smart_thread, fbi,
+					"lcd_refresh");
+	if (IS_ERR(fbi->smart_thread)) {
+		pr_err("%s: unable to create kernel thread\n", __func__);
+		return PTR_ERR(fbi->smart_thread);
+	}
+
+	return 0;
+}
+#else
+static inline int pxafb_smart_init(struct pxafb_info *fbi) { return 0; }
+#endif /* CONFIG_FB_PXA_SMARTPANEL */
+
+static void setup_parallel_timing(struct pxafb_info *fbi,
+				  struct fb_var_screeninfo *var)
+{
+	unsigned int lines_per_panel, pcd = get_pcd(fbi, var->pixclock);
+
+	fbi->reg_lccr1 =
+		LCCR1_DisWdth(var->xres) +
+		LCCR1_HorSnchWdth(var->hsync_len) +
+		LCCR1_BegLnDel(var->left_margin) +
+		LCCR1_EndLnDel(var->right_margin);
+
+	/*
+	 * If we have a dual scan LCD, we need to halve
+	 * the YRES parameter.
+	 */
+	lines_per_panel = var->yres;
+	if ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual)
+		lines_per_panel /= 2;
+
+	fbi->reg_lccr2 =
+		LCCR2_DisHght(lines_per_panel) +
+		LCCR2_VrtSnchWdth(var->vsync_len) +
+		LCCR2_BegFrmDel(var->upper_margin) +
+		LCCR2_EndFrmDel(var->lower_margin);
+
+	fbi->reg_lccr3 = fbi->lccr3 |
+		(var->sync & FB_SYNC_HOR_HIGH_ACT ?
+		 LCCR3_HorSnchH : LCCR3_HorSnchL) |
+		(var->sync & FB_SYNC_VERT_HIGH_ACT ?
+		 LCCR3_VrtSnchH : LCCR3_VrtSnchL);
+
+	if (pcd) {
+		fbi->reg_lccr3 |= LCCR3_PixClkDiv(pcd);
+		set_hsync_time(fbi, pcd);
+	}
+}
+
+/*
+ * pxafb_activate_var():
+ *	Configures LCD Controller based on entries in var parameter.
+ *	Settings are only written to the controller if changes were made.
+ */
+static int pxafb_activate_var(struct fb_var_screeninfo *var,
+			      struct pxafb_info *fbi)
+{
+	u_long flags;
+
+	/* Update shadow copy atomically */
+	local_irq_save(flags);
+
+#ifdef CONFIG_FB_PXA_SMARTPANEL
+	if (fbi->lccr0 & LCCR0_LCDT)
+		setup_smart_timing(fbi, var);
+	else
+#endif
+		setup_parallel_timing(fbi, var);
+
+	setup_base_frame(fbi, var, 0);
+
+	fbi->reg_lccr0 = fbi->lccr0 |
+		(LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
+		 LCCR0_QDM | LCCR0_BM  | LCCR0_OUM);
+
+	fbi->reg_lccr3 |= pxafb_var_to_lccr3(var);
+
+	fbi->reg_lccr4 = lcd_readl(fbi, LCCR4) & ~LCCR4_PAL_FOR_MASK;
+	fbi->reg_lccr4 |= (fbi->lccr4 & LCCR4_PAL_FOR_MASK);
+	local_irq_restore(flags);
+
+	/*
+	 * Only update the registers if the controller is enabled
+	 * and something has changed.
+	 */
+	if ((lcd_readl(fbi, LCCR0) != fbi->reg_lccr0) ||
+	    (lcd_readl(fbi, LCCR1) != fbi->reg_lccr1) ||
+	    (lcd_readl(fbi, LCCR2) != fbi->reg_lccr2) ||
+	    (lcd_readl(fbi, LCCR3) != fbi->reg_lccr3) ||
+	    (lcd_readl(fbi, LCCR4) != fbi->reg_lccr4) ||
+	    (lcd_readl(fbi, FDADR0) != fbi->fdadr[0]) ||
+	    ((fbi->lccr0 & LCCR0_SDS) &&
+	    (lcd_readl(fbi, FDADR1) != fbi->fdadr[1])))
+		pxafb_schedule_work(fbi, C_REENABLE);
+
+	return 0;
+}
+
+/*
+ * NOTE!  The following functions are purely helpers for set_ctrlr_state.
+ * Do not call them directly; set_ctrlr_state does the correct serialisation
+ * to ensure that things happen in the right way 100% of time time.
+ *	-- rmk
+ */
+static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on)
+{
+	pr_debug("pxafb: backlight o%s\n", on ? "n" : "ff");
+
+	if (fbi->backlight_power)
+		fbi->backlight_power(on);
+}
+
+static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on)
+{
+	pr_debug("pxafb: LCD power o%s\n", on ? "n" : "ff");
+
+	if (fbi->lcd_power)
+		fbi->lcd_power(on, &fbi->fb.var);
+
+	if (fbi->lcd_supply && fbi->lcd_supply_enabled != on) {
+		int ret;
+
+		if (on)
+			ret = regulator_enable(fbi->lcd_supply);
+		else
+			ret = regulator_disable(fbi->lcd_supply);
+
+		if (ret < 0)
+			pr_warn("Unable to %s LCD supply regulator: %d\n",
+				str_enable_disable(on), ret);
+		else
+			fbi->lcd_supply_enabled = on;
+	}
+}
+
+static void pxafb_enable_controller(struct pxafb_info *fbi)
+{
+	pr_debug("pxafb: Enabling LCD controller\n");
+	pr_debug("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr[0]);
+	pr_debug("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr[1]);
+	pr_debug("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0);
+	pr_debug("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1);
+	pr_debug("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
+	pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
+
+	/* enable LCD controller clock */
+	if (clk_prepare_enable(fbi->clk)) {
+		pr_err("%s: Failed to prepare clock\n", __func__);
+		return;
+	}
+
+	if (fbi->lccr0 & LCCR0_LCDT)
+		return;
+
+	/* Sequence from 11.7.10 */
+	lcd_writel(fbi, LCCR4, fbi->reg_lccr4);
+	lcd_writel(fbi, LCCR3, fbi->reg_lccr3);
+	lcd_writel(fbi, LCCR2, fbi->reg_lccr2);
+	lcd_writel(fbi, LCCR1, fbi->reg_lccr1);
+	lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
+
+	lcd_writel(fbi, FDADR0, fbi->fdadr[0]);
+	if (fbi->lccr0 & LCCR0_SDS)
+		lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
+	lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB);
+}
+
+static void pxafb_disable_controller(struct pxafb_info *fbi)
+{
+	uint32_t lccr0;
+
+#ifdef CONFIG_FB_PXA_SMARTPANEL
+	if (fbi->lccr0 & LCCR0_LCDT) {
+		wait_for_completion_timeout(&fbi->refresh_done,
+				msecs_to_jiffies(200));
+		return;
+	}
+#endif
+
+	/* Clear LCD Status Register */
+	lcd_writel(fbi, LCSR, 0xffffffff);
+
+	lccr0 = lcd_readl(fbi, LCCR0) & ~LCCR0_LDM;
+	lcd_writel(fbi, LCCR0, lccr0);
+	lcd_writel(fbi, LCCR0, lccr0 | LCCR0_DIS);
+
+	wait_for_completion_timeout(&fbi->disable_done, msecs_to_jiffies(200));
+
+	/* disable LCD controller clock */
+	clk_disable_unprepare(fbi->clk);
+}
+
+/*
+ *  pxafb_handle_irq: Handle 'LCD DONE' interrupts.
+ */
+static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
+{
+	struct pxafb_info *fbi = dev_id;
+	unsigned int lccr0, lcsr;
+
+	lcsr = lcd_readl(fbi, LCSR);
+	if (lcsr & LCSR_LDD) {
+		lccr0 = lcd_readl(fbi, LCCR0);
+		lcd_writel(fbi, LCCR0, lccr0 | LCCR0_LDM);
+		complete(&fbi->disable_done);
+	}
+
+#ifdef CONFIG_FB_PXA_SMARTPANEL
+	if (lcsr & LCSR_CMD_INT)
+		complete(&fbi->command_done);
+#endif
+	lcd_writel(fbi, LCSR, lcsr);
+
+#ifdef CONFIG_FB_PXA_OVERLAY
+	{
+		unsigned int lcsr1 = lcd_readl(fbi, LCSR1);
+		if (lcsr1 & LCSR1_BS(1))
+			complete(&fbi->overlay[0].branch_done);
+
+		if (lcsr1 & LCSR1_BS(2))
+			complete(&fbi->overlay[1].branch_done);
+
+		lcd_writel(fbi, LCSR1, lcsr1);
+	}
+#endif
+	return IRQ_HANDLED;
+}
+
+/*
+ * This function must be called from task context only, since it will
+ * sleep when disabling the LCD controller, or if we get two contending
+ * processes trying to alter state.
+ */
+static void set_ctrlr_state(struct pxafb_info *fbi, u_int state)
+{
+	u_int old_state;
+
+	mutex_lock(&fbi->ctrlr_lock);
+
+	old_state = fbi->state;
+
+	/*
+	 * Hack around fbcon initialisation.
+	 */
+	if (old_state == C_STARTUP && state == C_REENABLE)
+		state = C_ENABLE;
+
+	switch (state) {
+	case C_DISABLE_CLKCHANGE:
+		/*
+		 * Disable controller for clock change.  If the
+		 * controller is already disabled, then do nothing.
+		 */
+		if (old_state != C_DISABLE && old_state != C_DISABLE_PM) {
+			fbi->state = state;
+			/* TODO __pxafb_lcd_power(fbi, 0); */
+			pxafb_disable_controller(fbi);
+		}
+		break;
+
+	case C_DISABLE_PM:
+	case C_DISABLE:
+		/*
+		 * Disable controller
+		 */
+		if (old_state != C_DISABLE) {
+			fbi->state = state;
+			__pxafb_backlight_power(fbi, 0);
+			__pxafb_lcd_power(fbi, 0);
+			if (old_state != C_DISABLE_CLKCHANGE)
+				pxafb_disable_controller(fbi);
+		}
+		break;
+
+	case C_ENABLE_CLKCHANGE:
+		/*
+		 * Enable the controller after clock change.  Only
+		 * do this if we were disabled for the clock change.
+		 */
+		if (old_state == C_DISABLE_CLKCHANGE) {
+			fbi->state = C_ENABLE;
+			pxafb_enable_controller(fbi);
+			/* TODO __pxafb_lcd_power(fbi, 1); */
+		}
+		break;
+
+	case C_REENABLE:
+		/*
+		 * Re-enable the controller only if it was already
+		 * enabled.  This is so we reprogram the control
+		 * registers.
+		 */
+		if (old_state == C_ENABLE) {
+			__pxafb_lcd_power(fbi, 0);
+			pxafb_disable_controller(fbi);
+			pxafb_enable_controller(fbi);
+			__pxafb_lcd_power(fbi, 1);
+		}
+		break;
+
+	case C_ENABLE_PM:
+		/*
+		 * Re-enable the controller after PM.  This is not
+		 * perfect - think about the case where we were doing
+		 * a clock change, and we suspended half-way through.
+		 */
+		if (old_state != C_DISABLE_PM)
+			break;
+		fallthrough;
+
+	case C_ENABLE:
+		/*
+		 * Power up the LCD screen, enable controller, and
+		 * turn on the backlight.
+		 */
+		if (old_state != C_ENABLE) {
+			fbi->state = C_ENABLE;
+			pxafb_enable_controller(fbi);
+			__pxafb_lcd_power(fbi, 1);
+			__pxafb_backlight_power(fbi, 1);
+		}
+		break;
+	}
+	mutex_unlock(&fbi->ctrlr_lock);
+}
+
+/*
+ * Our LCD controller task (which is called when we blank or unblank)
+ * via keventd.
+ */
+static void pxafb_task(struct work_struct *work)
+{
+	struct pxafb_info *fbi =
+		container_of(work, struct pxafb_info, task);
+	u_int state = xchg(&fbi->task_state, -1);
+
+	set_ctrlr_state(fbi, state);
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * CPU clock speed change handler.  We need to adjust the LCD timing
+ * parameters when the CPU clock is adjusted by the power management
+ * subsystem.
+ *
+ * TODO: Determine why f->new != 10*get_lclk_frequency_10khz()
+ */
+static int
+pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
+{
+	struct pxafb_info *fbi = TO_INF(nb, freq_transition);
+	/* TODO struct cpufreq_freqs *f = data; */
+	u_int pcd;
+
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+#ifdef CONFIG_FB_PXA_OVERLAY
+		if (!(fbi->overlay[0].usage || fbi->overlay[1].usage))
+#endif
+			set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
+		break;
+
+	case CPUFREQ_POSTCHANGE:
+		pcd = get_pcd(fbi, fbi->fb.var.pixclock);
+		set_hsync_time(fbi, pcd);
+		fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) |
+				  LCCR3_PixClkDiv(pcd);
+		set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
+		break;
+	}
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks.  Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+static int pxafb_suspend(struct device *dev)
+{
+	struct pxafb_info *fbi = dev_get_drvdata(dev);
+
+	set_ctrlr_state(fbi, C_DISABLE_PM);
+	return 0;
+}
+
+static int pxafb_resume(struct device *dev)
+{
+	struct pxafb_info *fbi = dev_get_drvdata(dev);
+
+	set_ctrlr_state(fbi, C_ENABLE_PM);
+	return 0;
+}
+
+static const struct dev_pm_ops pxafb_pm_ops = {
+	.suspend	= pxafb_suspend,
+	.resume		= pxafb_resume,
+};
+#endif
+
+static int pxafb_init_video_memory(struct pxafb_info *fbi)
+{
+	int size = PAGE_ALIGN(fbi->video_mem_size);
+
+	fbi->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
+	if (fbi->video_mem == NULL)
+		return -ENOMEM;
+
+	fbi->video_mem_phys = virt_to_phys(fbi->video_mem);
+	fbi->video_mem_size = size;
+
+	fbi->fb.fix.smem_start	= fbi->video_mem_phys;
+	fbi->fb.fix.smem_len	= fbi->video_mem_size;
+	fbi->fb.screen_base	= fbi->video_mem;
+
+	return fbi->video_mem ? 0 : -ENOMEM;
+}
+
+static void pxafb_decode_mach_info(struct pxafb_info *fbi,
+				   struct pxafb_mach_info *inf)
+{
+	unsigned int lcd_conn = inf->lcd_conn;
+	struct pxafb_mode_info *m;
+	int i;
+
+	fbi->cmap_inverse	= inf->cmap_inverse;
+	fbi->cmap_static	= inf->cmap_static;
+	fbi->lccr4 		= inf->lccr4;
+
+	switch (lcd_conn & LCD_TYPE_MASK) {
+	case LCD_TYPE_MONO_STN:
+		fbi->lccr0 = LCCR0_CMS;
+		break;
+	case LCD_TYPE_MONO_DSTN:
+		fbi->lccr0 = LCCR0_CMS | LCCR0_SDS;
+		break;
+	case LCD_TYPE_COLOR_STN:
+		fbi->lccr0 = 0;
+		break;
+	case LCD_TYPE_COLOR_DSTN:
+		fbi->lccr0 = LCCR0_SDS;
+		break;
+	case LCD_TYPE_COLOR_TFT:
+		fbi->lccr0 = LCCR0_PAS;
+		break;
+	case LCD_TYPE_SMART_PANEL:
+		fbi->lccr0 = LCCR0_LCDT | LCCR0_PAS;
+		break;
+	default:
+		/* fall back to backward compatibility way */
+		fbi->lccr0 = inf->lccr0;
+		fbi->lccr3 = inf->lccr3;
+		goto decode_mode;
+	}
+
+	if (lcd_conn == LCD_MONO_STN_8BPP)
+		fbi->lccr0 |= LCCR0_DPD;
+
+	fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
+	fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
+	fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
+	fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
+
+decode_mode:
+	pxafb_setmode(&fbi->fb.var, &inf->modes[0]);
+
+	/* decide video memory size as follows:
+	 * 1. default to mode of maximum resolution
+	 * 2. allow platform to override
+	 * 3. allow module parameter to override
+	 */
+	for (i = 0, m = &inf->modes[0]; i < inf->num_modes; i++, m++)
+		fbi->video_mem_size = max_t(size_t, fbi->video_mem_size,
+				m->xres * m->yres * m->bpp / 8);
+
+	if (inf->video_mem_size > fbi->video_mem_size)
+		fbi->video_mem_size = inf->video_mem_size;
+
+	if (video_mem_size > fbi->video_mem_size)
+		fbi->video_mem_size = video_mem_size;
+}
+
+static struct pxafb_info *pxafb_init_fbinfo(struct device *dev,
+					    struct pxafb_mach_info *inf)
+{
+	struct pxafb_info *fbi;
+	void *addr;
+
+	/* Alloc the pxafb_info and pseudo_palette in one step */
+	fbi = devm_kzalloc(dev, sizeof(struct pxafb_info) + sizeof(u32) * 16,
+			   GFP_KERNEL);
+	if (!fbi)
+		return ERR_PTR(-ENOMEM);
+
+	fbi->dev = dev;
+	fbi->inf = inf;
+
+	fbi->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(fbi->clk))
+		return ERR_CAST(fbi->clk);
+
+	strcpy(fbi->fb.fix.id, PXA_NAME);
+
+	fbi->fb.fix.type	= FB_TYPE_PACKED_PIXELS;
+	fbi->fb.fix.type_aux	= 0;
+	fbi->fb.fix.xpanstep	= 0;
+	fbi->fb.fix.ypanstep	= 1;
+	fbi->fb.fix.ywrapstep	= 0;
+	fbi->fb.fix.accel	= FB_ACCEL_NONE;
+
+	fbi->fb.var.nonstd	= 0;
+	fbi->fb.var.activate	= FB_ACTIVATE_NOW;
+	fbi->fb.var.height	= -1;
+	fbi->fb.var.width	= -1;
+	fbi->fb.var.accel_flags	= FB_ACCELF_TEXT;
+	fbi->fb.var.vmode	= FB_VMODE_NONINTERLACED;
+
+	fbi->fb.fbops		= &pxafb_ops;
+	fbi->fb.node		= -1;
+
+	addr = fbi;
+	addr = addr + sizeof(struct pxafb_info);
+	fbi->fb.pseudo_palette	= addr;
+
+	fbi->state		= C_STARTUP;
+	fbi->task_state		= (u_char)-1;
+
+	pxafb_decode_mach_info(fbi, inf);
+
+#ifdef CONFIG_FB_PXA_OVERLAY
+	/* place overlay(s) on top of base */
+	if (pxafb_overlay_supported())
+		fbi->lccr0 |= LCCR0_OUC;
+#endif
+
+	init_waitqueue_head(&fbi->ctrlr_wait);
+	INIT_WORK(&fbi->task, pxafb_task);
+	mutex_init(&fbi->ctrlr_lock);
+	init_completion(&fbi->disable_done);
+
+	return fbi;
+}
+
+#ifdef CONFIG_FB_PXA_PARAMETERS
+static int parse_opt_mode(struct device *dev, const char *this_opt,
+			  struct pxafb_mach_info *inf)
+{
+	const char *name = this_opt+5;
+	unsigned int namelen = strlen(name);
+	int res_specified = 0, bpp_specified = 0;
+	unsigned int xres = 0, yres = 0, bpp = 0;
+	int yres_specified = 0;
+	int i;
+	for (i = namelen-1; i >= 0; i--) {
+		switch (name[i]) {
+		case '-':
+			namelen = i;
+			if (!bpp_specified && !yres_specified) {
+				bpp = simple_strtoul(&name[i+1], NULL, 0);
+				bpp_specified = 1;
+			} else
+				goto done;
+			break;
+		case 'x':
+			if (!yres_specified) {
+				yres = simple_strtoul(&name[i+1], NULL, 0);
+				yres_specified = 1;
+			} else
+				goto done;
+			break;
+		case '0' ... '9':
+			break;
+		default:
+			goto done;
+		}
+	}
+	if (i < 0 && yres_specified) {
+		xres = simple_strtoul(name, NULL, 0);
+		res_specified = 1;
+	}
+done:
+	if (res_specified) {
+		dev_info(dev, "overriding resolution: %dx%d\n", xres, yres);
+		inf->modes[0].xres = xres; inf->modes[0].yres = yres;
+	}
+	if (bpp_specified)
+		switch (bpp) {
+		case 1:
+		case 2:
+		case 4:
+		case 8:
+		case 16:
+			inf->modes[0].bpp = bpp;
+			dev_info(dev, "overriding bit depth: %d\n", bpp);
+			break;
+		default:
+			dev_err(dev, "Depth %d is not valid\n", bpp);
+			return -EINVAL;
+		}
+	return 0;
+}
+
+static int parse_opt(struct device *dev, char *this_opt,
+		     struct pxafb_mach_info *inf)
+{
+	struct pxafb_mode_info *mode = &inf->modes[0];
+	char s[64];
+
+	s[0] = '\0';
+
+	if (!strncmp(this_opt, "vmem:", 5)) {
+		video_mem_size = memparse(this_opt + 5, NULL);
+	} else if (!strncmp(this_opt, "mode:", 5)) {
+		return parse_opt_mode(dev, this_opt, inf);
+	} else if (!strncmp(this_opt, "pixclock:", 9)) {
+		mode->pixclock = simple_strtoul(this_opt+9, NULL, 0);
+		sprintf(s, "pixclock: %ld\n", mode->pixclock);
+	} else if (!strncmp(this_opt, "left:", 5)) {
+		mode->left_margin = simple_strtoul(this_opt+5, NULL, 0);
+		sprintf(s, "left: %u\n", mode->left_margin);
+	} else if (!strncmp(this_opt, "right:", 6)) {
+		mode->right_margin = simple_strtoul(this_opt+6, NULL, 0);
+		sprintf(s, "right: %u\n", mode->right_margin);
+	} else if (!strncmp(this_opt, "upper:", 6)) {
+		mode->upper_margin = simple_strtoul(this_opt+6, NULL, 0);
+		sprintf(s, "upper: %u\n", mode->upper_margin);
+	} else if (!strncmp(this_opt, "lower:", 6)) {
+		mode->lower_margin = simple_strtoul(this_opt+6, NULL, 0);
+		sprintf(s, "lower: %u\n", mode->lower_margin);
+	} else if (!strncmp(this_opt, "hsynclen:", 9)) {
+		mode->hsync_len = simple_strtoul(this_opt+9, NULL, 0);
+		sprintf(s, "hsynclen: %u\n", mode->hsync_len);
+	} else if (!strncmp(this_opt, "vsynclen:", 9)) {
+		mode->vsync_len = simple_strtoul(this_opt+9, NULL, 0);
+		sprintf(s, "vsynclen: %u\n", mode->vsync_len);
+	} else if (!strncmp(this_opt, "hsync:", 6)) {
+		if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
+			sprintf(s, "hsync: Active Low\n");
+			mode->sync &= ~FB_SYNC_HOR_HIGH_ACT;
+		} else {
+			sprintf(s, "hsync: Active High\n");
+			mode->sync |= FB_SYNC_HOR_HIGH_ACT;
+		}
+	} else if (!strncmp(this_opt, "vsync:", 6)) {
+		if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
+			sprintf(s, "vsync: Active Low\n");
+			mode->sync &= ~FB_SYNC_VERT_HIGH_ACT;
+		} else {
+			sprintf(s, "vsync: Active High\n");
+			mode->sync |= FB_SYNC_VERT_HIGH_ACT;
+		}
+	} else if (!strncmp(this_opt, "dpc:", 4)) {
+		if (simple_strtoul(this_opt+4, NULL, 0) == 0) {
+			sprintf(s, "double pixel clock: false\n");
+			inf->lccr3 &= ~LCCR3_DPC;
+		} else {
+			sprintf(s, "double pixel clock: true\n");
+			inf->lccr3 |= LCCR3_DPC;
+		}
+	} else if (!strncmp(this_opt, "outputen:", 9)) {
+		if (simple_strtoul(this_opt+9, NULL, 0) == 0) {
+			sprintf(s, "output enable: active low\n");
+			inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnL;
+		} else {
+			sprintf(s, "output enable: active high\n");
+			inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnH;
+		}
+	} else if (!strncmp(this_opt, "pixclockpol:", 12)) {
+		if (simple_strtoul(this_opt+12, NULL, 0) == 0) {
+			sprintf(s, "pixel clock polarity: falling edge\n");
+			inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixFlEdg;
+		} else {
+			sprintf(s, "pixel clock polarity: rising edge\n");
+			inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixRsEdg;
+		}
+	} else if (!strncmp(this_opt, "color", 5)) {
+		inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Color;
+	} else if (!strncmp(this_opt, "mono", 4)) {
+		inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Mono;
+	} else if (!strncmp(this_opt, "active", 6)) {
+		inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Act;
+	} else if (!strncmp(this_opt, "passive", 7)) {
+		inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Pas;
+	} else if (!strncmp(this_opt, "single", 6)) {
+		inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Sngl;
+	} else if (!strncmp(this_opt, "dual", 4)) {
+		inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Dual;
+	} else if (!strncmp(this_opt, "4pix", 4)) {
+		inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_4PixMono;
+	} else if (!strncmp(this_opt, "8pix", 4)) {
+		inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_8PixMono;
+	} else {
+		dev_err(dev, "unknown option: %s\n", this_opt);
+		return -EINVAL;
+	}
+
+	if (s[0] != '\0')
+		dev_info(dev, "override %s", s);
+
+	return 0;
+}
+
+static int pxafb_parse_options(struct device *dev, char *options,
+			       struct pxafb_mach_info *inf)
+{
+	char *this_opt;
+	int ret;
+
+	if (!options || !*options)
+		return 0;
+
+	dev_dbg(dev, "options are \"%s\"\n", options ? options : "null");
+
+	/* could be made table driven or similar?... */
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		ret = parse_opt(dev, this_opt, inf);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+static char g_options[256] = "";
+
+#ifndef MODULE
+static int __init pxafb_setup_options(void)
+{
+	char *options = NULL;
+
+	if (fb_get_options("pxafb", &options))
+		return -ENODEV;
+
+	if (options)
+		strscpy(g_options, options, sizeof(g_options));
+
+	return 0;
+}
+#else
+#define pxafb_setup_options()		(0)
+
+module_param_string(options, g_options, sizeof(g_options), 0);
+MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.rst)");
+#endif
+
+#else
+#define pxafb_parse_options(...)	(0)
+#define pxafb_setup_options()		(0)
+#endif
+
+#ifdef DEBUG_VAR
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void pxafb_check_options(struct device *dev, struct pxafb_mach_info *inf)
+{
+	if (inf->lcd_conn)
+		return;
+
+	if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
+		dev_warn(dev, "machine LCCR0 setting contains "
+				"illegal bits: %08x\n",
+			inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
+	if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
+		dev_warn(dev, "machine LCCR3 setting contains "
+				"illegal bits: %08x\n",
+			inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
+	if (inf->lccr0 & LCCR0_DPD &&
+	    ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
+	     (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
+	     (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
+		dev_warn(dev, "Double Pixel Data (DPD) mode is "
+				"only valid in passive mono"
+				" single panel mode\n");
+	if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
+	    (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
+		dev_warn(dev, "Dual panel only valid in passive mode\n");
+	if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
+	     (inf->modes->upper_margin || inf->modes->lower_margin))
+		dev_warn(dev, "Upper and lower margins must be 0 in "
+				"passive mode\n");
+}
+#else
+#define pxafb_check_options(...)	do {} while (0)
+#endif
+
+#if defined(CONFIG_OF)
+static const char * const lcd_types[] = {
+	"unknown", "mono-stn", "mono-dstn", "color-stn", "color-dstn",
+	"color-tft", "smart-panel", NULL
+};
+
+static int of_get_pxafb_display(struct device *dev, struct device_node *disp,
+				struct pxafb_mach_info *info, u32 bus_width)
+{
+	struct display_timings *timings;
+	struct videomode vm;
+	int i, ret = -EINVAL;
+	const char *s;
+
+	ret = of_property_read_string(disp, "lcd-type", &s);
+	if (ret)
+		s = "color-tft";
+
+	i = match_string(lcd_types, -1, s);
+	if (i < 0) {
+		dev_err(dev, "lcd-type %s is unknown\n", s);
+		return i;
+	}
+	info->lcd_conn |= LCD_CONN_TYPE(i);
+	info->lcd_conn |= LCD_CONN_WIDTH(bus_width);
+
+	timings = of_get_display_timings(disp);
+	if (!timings)
+		return -EINVAL;
+
+	ret = -ENOMEM;
+	info->modes = devm_kcalloc(dev, timings->num_timings,
+				   sizeof(info->modes[0]),
+				   GFP_KERNEL);
+	if (!info->modes)
+		goto out;
+	info->num_modes = timings->num_timings;
+
+	for (i = 0; i < timings->num_timings; i++) {
+		ret = videomode_from_timings(timings, &vm, i);
+		if (ret) {
+			dev_err(dev, "videomode_from_timings %d failed: %d\n",
+				i, ret);
+			goto out;
+		}
+		if (vm.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
+			info->lcd_conn |= LCD_PCLK_EDGE_RISE;
+		if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+			info->lcd_conn |= LCD_PCLK_EDGE_FALL;
+		if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
+			info->lcd_conn |= LCD_BIAS_ACTIVE_HIGH;
+		if (vm.flags & DISPLAY_FLAGS_DE_LOW)
+			info->lcd_conn |= LCD_BIAS_ACTIVE_LOW;
+		if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
+			info->modes[i].sync |= FB_SYNC_HOR_HIGH_ACT;
+		if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
+			info->modes[i].sync |= FB_SYNC_VERT_HIGH_ACT;
+
+		info->modes[i].pixclock = 1000000000UL / (vm.pixelclock / 1000);
+		info->modes[i].xres = vm.hactive;
+		info->modes[i].yres = vm.vactive;
+		info->modes[i].hsync_len = vm.hsync_len;
+		info->modes[i].left_margin = vm.hback_porch;
+		info->modes[i].right_margin = vm.hfront_porch;
+		info->modes[i].vsync_len = vm.vsync_len;
+		info->modes[i].upper_margin = vm.vback_porch;
+		info->modes[i].lower_margin = vm.vfront_porch;
+	}
+	ret = 0;
+
+out:
+	display_timings_release(timings);
+	return ret;
+}
+
+static int of_get_pxafb_mode_info(struct device *dev,
+				  struct pxafb_mach_info *info)
+{
+	struct device_node *display, *np;
+	u32 bus_width;
+	int ret, i;
+
+	np = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
+	if (!np) {
+		dev_err(dev, "could not find endpoint\n");
+		return -EINVAL;
+	}
+	ret = of_property_read_u32(np, "bus-width", &bus_width);
+	if (ret) {
+		dev_err(dev, "no bus-width specified: %d\n", ret);
+		of_node_put(np);
+		return ret;
+	}
+
+	display = of_graph_get_remote_port_parent(np);
+	of_node_put(np);
+	if (!display) {
+		dev_err(dev, "no display defined\n");
+		return -EINVAL;
+	}
+
+	ret = of_get_pxafb_display(dev, display, info, bus_width);
+	of_node_put(display);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < info->num_modes; i++)
+		info->modes[i].bpp = bus_width;
+
+	return 0;
+}
+
+static struct pxafb_mach_info *of_pxafb_of_mach_info(struct device *dev)
+{
+	int ret;
+	struct pxafb_mach_info *info;
+
+	if (!dev->of_node)
+		return NULL;
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return ERR_PTR(-ENOMEM);
+	ret = of_get_pxafb_mode_info(dev, info);
+	if (ret)
+		return ERR_PTR(ret);
+
+	/*
+	 * On purpose, neither lccrX registers nor video memory size can be
+	 * specified through device-tree, they are considered more a debug hack
+	 * available through command line.
+	 */
+	return info;
+}
+#else
+static struct pxafb_mach_info *of_pxafb_of_mach_info(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
+static int pxafb_probe(struct platform_device *dev)
+{
+	struct pxafb_info *fbi;
+	struct pxafb_mach_info *inf, *pdata;
+	int irq, ret;
+
+	dev_dbg(&dev->dev, "pxafb_probe\n");
+
+	ret = -ENOMEM;
+	pdata = dev_get_platdata(&dev->dev);
+	if (pdata) {
+		inf = devm_kmemdup(&dev->dev, pdata, sizeof(*pdata), GFP_KERNEL);
+		if (!inf)
+			goto failed;
+
+		inf->modes = devm_kmemdup_array(&dev->dev, pdata->modes, pdata->num_modes,
+						sizeof(*pdata->modes), GFP_KERNEL);
+		if (!inf->modes)
+			goto failed;
+	} else {
+		inf = of_pxafb_of_mach_info(&dev->dev);
+		if (IS_ERR_OR_NULL(inf))
+			goto failed;
+	}
+
+	ret = pxafb_parse_options(&dev->dev, g_options, inf);
+	if (ret < 0)
+		goto failed;
+
+	pxafb_check_options(&dev->dev, inf);
+
+	dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
+			inf->modes->xres,
+			inf->modes->yres,
+			inf->modes->bpp);
+	if (inf->modes->xres == 0 ||
+	    inf->modes->yres == 0 ||
+	    inf->modes->bpp == 0) {
+		dev_err(&dev->dev, "Invalid resolution or bit depth\n");
+		ret = -EINVAL;
+		goto failed;
+	}
+
+	fbi = pxafb_init_fbinfo(&dev->dev, inf);
+	if (IS_ERR(fbi)) {
+		dev_err(&dev->dev, "Failed to initialize framebuffer device\n");
+		ret = PTR_ERR(fbi);
+		goto failed;
+	}
+
+	if (cpu_is_pxa3xx() && inf->acceleration_enabled)
+		fbi->fb.fix.accel = FB_ACCEL_PXA3XX;
+
+	fbi->backlight_power = inf->pxafb_backlight_power;
+	fbi->lcd_power = inf->pxafb_lcd_power;
+
+	fbi->lcd_supply = devm_regulator_get_optional(&dev->dev, "lcd");
+	if (IS_ERR(fbi->lcd_supply)) {
+		if (PTR_ERR(fbi->lcd_supply) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		fbi->lcd_supply = NULL;
+	}
+
+	fbi->mmio_base = devm_platform_ioremap_resource(dev, 0);
+	if (IS_ERR(fbi->mmio_base)) {
+		dev_err(&dev->dev, "failed to get I/O memory\n");
+		ret = PTR_ERR(fbi->mmio_base);
+		goto failed;
+	}
+
+	fbi->dma_buff_size = PAGE_ALIGN(sizeof(struct pxafb_dma_buff));
+	fbi->dma_buff = dma_alloc_coherent(fbi->dev, fbi->dma_buff_size,
+				&fbi->dma_buff_phys, GFP_KERNEL);
+	if (fbi->dma_buff == NULL) {
+		dev_err(&dev->dev, "failed to allocate memory for DMA\n");
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	ret = pxafb_init_video_memory(fbi);
+	if (ret) {
+		dev_err(&dev->dev, "Failed to allocate video RAM: %d\n", ret);
+		ret = -ENOMEM;
+		goto failed_free_dma;
+	}
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		ret = -ENODEV;
+		goto failed_free_mem;
+	}
+
+	ret = devm_request_irq(&dev->dev, irq, pxafb_handle_irq, 0, "LCD", fbi);
+	if (ret) {
+		dev_err(&dev->dev, "request_irq failed: %d\n", ret);
+		ret = -EBUSY;
+		goto failed_free_mem;
+	}
+
+	ret = pxafb_smart_init(fbi);
+	if (ret) {
+		dev_err(&dev->dev, "failed to initialize smartpanel\n");
+		goto failed_free_mem;
+	}
+
+	/*
+	 * This makes sure that our colour bitfield
+	 * descriptors are correctly initialised.
+	 */
+	ret = pxafb_check_var(&fbi->fb.var, &fbi->fb);
+	if (ret) {
+		dev_err(&dev->dev, "failed to get suitable mode\n");
+		goto failed_free_mem;
+	}
+
+	ret = pxafb_set_par(&fbi->fb);
+	if (ret) {
+		dev_err(&dev->dev, "Failed to set parameters\n");
+		goto failed_free_mem;
+	}
+
+	platform_set_drvdata(dev, fbi);
+
+	ret = register_framebuffer(&fbi->fb);
+	if (ret < 0) {
+		dev_err(&dev->dev,
+			"Failed to register framebuffer device: %d\n", ret);
+		goto failed_free_cmap;
+	}
+
+	pxafb_overlay_init(fbi);
+
+#ifdef CONFIG_CPU_FREQ
+	fbi->freq_transition.notifier_call = pxafb_freq_transition;
+	cpufreq_register_notifier(&fbi->freq_transition,
+				CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+	/*
+	 * Ok, now enable the LCD controller
+	 */
+	set_ctrlr_state(fbi, C_ENABLE);
+
+	return 0;
+
+failed_free_cmap:
+	if (fbi->fb.cmap.len)
+		fb_dealloc_cmap(&fbi->fb.cmap);
+failed_free_mem:
+	free_pages_exact(fbi->video_mem, fbi->video_mem_size);
+failed_free_dma:
+	dma_free_coherent(&dev->dev, fbi->dma_buff_size,
+			fbi->dma_buff, fbi->dma_buff_phys);
+failed:
+	return ret;
+}
+
+static void pxafb_remove(struct platform_device *dev)
+{
+	struct pxafb_info *fbi = platform_get_drvdata(dev);
+	struct fb_info *info;
+
+	if (!fbi)
+		return;
+
+	info = &fbi->fb;
+
+	pxafb_overlay_exit(fbi);
+	cancel_work_sync(&fbi->task);
+	unregister_framebuffer(info);
+
+	pxafb_disable_controller(fbi);
+
+	if (fbi->fb.cmap.len)
+		fb_dealloc_cmap(&fbi->fb.cmap);
+
+	free_pages_exact(fbi->video_mem, fbi->video_mem_size);
+
+	dma_free_coherent(&dev->dev, fbi->dma_buff_size, fbi->dma_buff,
+			  fbi->dma_buff_phys);
+}
+
+static const struct of_device_id pxafb_of_dev_id[] = {
+	{ .compatible = "marvell,pxa270-lcdc", },
+	{ .compatible = "marvell,pxa300-lcdc", },
+	{ .compatible = "marvell,pxa2xx-lcdc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pxafb_of_dev_id);
+
+static struct platform_driver pxafb_driver = {
+	.probe		= pxafb_probe,
+	.remove		= pxafb_remove,
+	.driver		= {
+		.name	= "pxa2xx-fb",
+		.of_match_table = pxafb_of_dev_id,
+#ifdef CONFIG_PM
+		.pm	= &pxafb_pm_ops,
+#endif
+	},
+};
+
+static int __init pxafb_init(void)
+{
+	if (pxafb_setup_options())
+		return -EINVAL;
+
+	return platform_driver_register(&pxafb_driver);
+}
+
+static void __exit pxafb_exit(void)
+{
+	platform_driver_unregister(&pxafb_driver);
+}
+
+module_init(pxafb_init);
+module_exit(pxafb_exit);
+
+MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
+MODULE_LICENSE("GPL");
-- 
cgit v1.3.1