From 506ada89629ec7059b96ecfb0dc7d33ece0103ca Mon Sep 17 00:00:00 2001
From: Eduard Zingerman <eddyz87@gmail.com>
Date: Fri, 4 Sep 2026 17:05:56 -0700
Subject: bpf: mark a NULL kfunc argument precise

check_kfunc_arg() allows bpf_register_is_null() for nullable arguments
w/o marking the underlying scalar register precise. Hence a checkpoint
created on such a path would prune against arbitrary scalar value.

Fixes: 3bda08b63670 ("bpf: Allow NULL buffers in bpf_dynptr_slice(_rw)")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260904-register-is-null-precise-fixes-v1-5-0f5a360ff15d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
---
 drivers/video/fbdev/metronomefb.c | 728 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 728 insertions(+)
 create mode 100644 drivers/video/fbdev/metronomefb.c

(limited to 'drivers/video/fbdev/metronomefb.c')

diff --git a/drivers/video/fbdev/metronomefb.c b/drivers/video/fbdev/metronomefb.c
new file mode 100644
index 000000000..83c614963
--- /dev/null
+++ b/drivers/video/fbdev/metronomefb.c
@@ -0,0 +1,728 @@
+/*
+ * linux/drivers/video/metronomefb.c -- FB driver for Metronome controller
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. https://www.eink.com/
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * It is intended to be architecture independent. A board specific driver
+ * must be used to perform all the physical IO interactions. An example
+ * is provided as am200epd.c
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/firmware.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/irq.h>
+
+#include <video/metronomefb.h>
+
+#include <linux/unaligned.h>
+
+/* Display specific information */
+#define DPY_W 832
+#define DPY_H 622
+
+static int user_wfm_size;
+
+/* frame differs from image. frame includes non-visible pixels */
+struct epd_frame {
+	int fw; /* frame width */
+	int fh; /* frame height */
+	u16 config[4];
+	int wfm_size;
+};
+
+static struct epd_frame epd_frame_table[] = {
+	{
+		.fw = 832,
+		.fh = 622,
+		.config = {
+			15 /* sdlew */
+			| 2 << 8 /* sdosz */
+			| 0 << 11 /* sdor */
+			| 0 << 12 /* sdces */
+			| 0 << 15, /* sdcer */
+			42 /* gdspl */
+			| 1 << 8 /* gdr1 */
+			| 1 << 9 /* sdshr */
+			| 0 << 15, /* gdspp */
+			18 /* gdspw */
+			| 0 << 15, /* dispc */
+			599 /* vdlc */
+			| 0 << 11 /* dsi */
+			| 0 << 12, /* dsic */
+		},
+		.wfm_size = 47001,
+	},
+	{
+		.fw = 1088,
+		.fh = 791,
+		.config = {
+			0x0104,
+			0x031f,
+			0x0088,
+			0x02ff,
+		},
+		.wfm_size = 46770,
+	},
+	{
+		.fw = 1200,
+		.fh = 842,
+		.config = {
+			0x0101,
+			0x030e,
+			0x0012,
+			0x0280,
+		},
+		.wfm_size = 46770,
+	},
+};
+
+static struct fb_fix_screeninfo metronomefb_fix = {
+	.id =		"metronomefb",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_STATIC_PSEUDOCOLOR,
+	.xpanstep =	0,
+	.ypanstep =	0,
+	.ywrapstep =	0,
+	.line_length =	DPY_W,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo metronomefb_var = {
+	.xres		= DPY_W,
+	.yres		= DPY_H,
+	.xres_virtual	= DPY_W,
+	.yres_virtual	= DPY_H,
+	.bits_per_pixel	= 8,
+	.grayscale	= 1,
+	.nonstd		= 1,
+	.red =		{ 4, 3, 0 },
+	.green =	{ 0, 0, 0 },
+	.blue =		{ 0, 0, 0 },
+	.transp =	{ 0, 0, 0 },
+};
+
+/* the waveform structure that is coming from userspace firmware */
+struct waveform_hdr {
+	u8 stuff[32];
+
+	u8 wmta[3];
+	u8 fvsn;
+
+	u8 luts;
+	u8 mc;
+	u8 trc;
+	u8 stuff3;
+
+	u8 endb;
+	u8 swtb;
+	u8 stuff2a[2];
+
+	u8 stuff2b[3];
+	u8 wfm_cs;
+} __attribute__ ((packed));
+
+/* main metronomefb functions */
+static u8 calc_cksum(int start, int end, u8 *mem)
+{
+	u8 tmp = 0;
+	int i;
+
+	for (i = start; i < end; i++)
+		tmp += mem[i];
+
+	return tmp;
+}
+
+static u16 calc_img_cksum(u16 *start, int length)
+{
+	u16 tmp = 0;
+
+	while (length--)
+		tmp += *start++;
+
+	return tmp;
+}
+
+/* here we decode the incoming waveform file and populate metromem */
+static int load_waveform(u8 *mem, size_t size, int m, int t,
+			 struct metronomefb_par *par)
+{
+	int tta;
+	int wmta;
+	int trn = 0;
+	int i;
+	unsigned char v;
+	u8 cksum;
+	int cksum_idx;
+	int wfm_idx, owfm_idx;
+	int mem_idx = 0;
+	struct waveform_hdr *wfm_hdr;
+	u8 *metromem = par->metromem_wfm;
+	struct device *dev = par->info->device;
+
+	if (user_wfm_size)
+		epd_frame_table[par->dt].wfm_size = user_wfm_size;
+
+	if (size != epd_frame_table[par->dt].wfm_size) {
+		dev_err(dev, "Error: unexpected size %zd != %d\n", size,
+					epd_frame_table[par->dt].wfm_size);
+		return -EINVAL;
+	}
+
+	wfm_hdr = (struct waveform_hdr *) mem;
+
+	if (wfm_hdr->fvsn != 1) {
+		dev_err(dev, "Error: bad fvsn %x\n", wfm_hdr->fvsn);
+		return -EINVAL;
+	}
+	if (wfm_hdr->luts != 0) {
+		dev_err(dev, "Error: bad luts %x\n", wfm_hdr->luts);
+		return -EINVAL;
+	}
+	cksum = calc_cksum(32, 47, mem);
+	if (cksum != wfm_hdr->wfm_cs) {
+		dev_err(dev, "Error: bad cksum %x != %x\n", cksum,
+					wfm_hdr->wfm_cs);
+		return -EINVAL;
+	}
+	wfm_hdr->mc += 1;
+	wfm_hdr->trc += 1;
+	for (i = 0; i < 5; i++) {
+		if (*(wfm_hdr->stuff2a + i) != 0) {
+			dev_err(dev, "Error: unexpected value in padding\n");
+			return -EINVAL;
+		}
+	}
+
+	/* calculating trn. trn is something used to index into
+	the waveform. presumably selecting the right one for the
+	desired temperature. it works out the offset of the first
+	v that exceeds the specified temperature */
+	if ((sizeof(*wfm_hdr) + wfm_hdr->trc) > size)
+		return -EINVAL;
+
+	for (i = sizeof(*wfm_hdr); i <= sizeof(*wfm_hdr) + wfm_hdr->trc; i++) {
+		if (mem[i] > t) {
+			trn = i - sizeof(*wfm_hdr) - 1;
+			break;
+		}
+	}
+
+	/* check temperature range table checksum */
+	cksum_idx = sizeof(*wfm_hdr) + wfm_hdr->trc + 1;
+	if (cksum_idx >= size)
+		return -EINVAL;
+	cksum = calc_cksum(sizeof(*wfm_hdr), cksum_idx, mem);
+	if (cksum != mem[cksum_idx]) {
+		dev_err(dev, "Error: bad temperature range table cksum"
+				" %x != %x\n", cksum, mem[cksum_idx]);
+		return -EINVAL;
+	}
+
+	/* check waveform mode table address checksum */
+	wmta = get_unaligned_le32(wfm_hdr->wmta) & 0x00FFFFFF;
+	cksum_idx = wmta + m*4 + 3;
+	if (cksum_idx >= size)
+		return -EINVAL;
+	cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
+	if (cksum != mem[cksum_idx]) {
+		dev_err(dev, "Error: bad mode table address cksum"
+				" %x != %x\n", cksum, mem[cksum_idx]);
+		return -EINVAL;
+	}
+
+	/* check waveform temperature table address checksum */
+	tta = get_unaligned_le32(mem + wmta + m * 4) & 0x00FFFFFF;
+	cksum_idx = tta + trn*4 + 3;
+	if (cksum_idx >= size)
+		return -EINVAL;
+	cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
+	if (cksum != mem[cksum_idx]) {
+		dev_err(dev, "Error: bad temperature table address cksum"
+			" %x != %x\n", cksum, mem[cksum_idx]);
+		return -EINVAL;
+	}
+
+	/* here we do the real work of putting the waveform into the
+	metromem buffer. this does runlength decoding of the waveform */
+	wfm_idx = get_unaligned_le32(mem + tta + trn * 4) & 0x00FFFFFF;
+	owfm_idx = wfm_idx;
+	if (wfm_idx >= size)
+		return -EINVAL;
+	while (wfm_idx < size) {
+		unsigned char rl;
+		v = mem[wfm_idx++];
+		if (v == wfm_hdr->swtb) {
+			while (((v = mem[wfm_idx++]) != wfm_hdr->swtb) &&
+				wfm_idx < size)
+				metromem[mem_idx++] = v;
+
+			continue;
+		}
+
+		if (v == wfm_hdr->endb)
+			break;
+
+		rl = mem[wfm_idx++];
+		for (i = 0; i <= rl; i++)
+			metromem[mem_idx++] = v;
+	}
+
+	cksum_idx = wfm_idx;
+	if (cksum_idx >= size)
+		return -EINVAL;
+	cksum = calc_cksum(owfm_idx, cksum_idx, mem);
+	if (cksum != mem[cksum_idx]) {
+		dev_err(dev, "Error: bad waveform data cksum"
+				" %x != %x\n", cksum, mem[cksum_idx]);
+		return -EINVAL;
+	}
+	par->frame_count = (mem_idx/64);
+
+	return 0;
+}
+
+static int metronome_display_cmd(struct metronomefb_par *par)
+{
+	int i;
+	u16 cs;
+	u16 opcode;
+	static u8 borderval;
+
+	/* setup display command
+	we can't immediately set the opcode since the controller
+	will try parse the command before we've set it all up
+	so we just set cs here and set the opcode at the end */
+
+	if (par->metromem_cmd->opcode == 0xCC40)
+		opcode = cs = 0xCC41;
+	else
+		opcode = cs = 0xCC40;
+
+	/* set the args ( 2 bytes ) for display */
+	i = 0;
+	par->metromem_cmd->args[i] = 	1 << 3 /* border update */
+					| ((borderval++ % 4) & 0x0F) << 4
+					| (par->frame_count - 1) << 8;
+	cs += par->metromem_cmd->args[i++];
+
+	/* the rest are 0 */
+	memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+
+	par->metromem_cmd->csum = cs;
+	par->metromem_cmd->opcode = opcode; /* display cmd */
+
+	return par->board->met_wait_event_intr(par);
+}
+
+static int metronome_powerup_cmd(struct metronomefb_par *par)
+{
+	int i;
+	u16 cs;
+
+	/* setup power up command */
+	par->metromem_cmd->opcode = 0x1234; /* pwr up pseudo cmd */
+	cs = par->metromem_cmd->opcode;
+
+	/* set pwr1,2,3 to 1024 */
+	for (i = 0; i < 3; i++) {
+		par->metromem_cmd->args[i] = 1024;
+		cs += par->metromem_cmd->args[i];
+	}
+
+	/* the rest are 0 */
+	memset(&par->metromem_cmd->args[i], 0,
+	       (ARRAY_SIZE(par->metromem_cmd->args) - i) * 2);
+
+	par->metromem_cmd->csum = cs;
+
+	msleep(1);
+	par->board->set_rst(par, 1);
+
+	msleep(1);
+	par->board->set_stdby(par, 1);
+
+	return par->board->met_wait_event(par);
+}
+
+static int metronome_config_cmd(struct metronomefb_par *par)
+{
+	/* setup config command
+	we can't immediately set the opcode since the controller
+	will try parse the command before we've set it all up */
+
+	memcpy(par->metromem_cmd->args, epd_frame_table[par->dt].config,
+		sizeof(epd_frame_table[par->dt].config));
+	/* the rest are 0 */
+	memset(&par->metromem_cmd->args[4], 0,
+	       (ARRAY_SIZE(par->metromem_cmd->args) - 4) * 2);
+
+	par->metromem_cmd->csum = 0xCC10;
+	par->metromem_cmd->csum += calc_img_cksum(par->metromem_cmd->args, 4);
+	par->metromem_cmd->opcode = 0xCC10; /* config cmd */
+
+	return par->board->met_wait_event(par);
+}
+
+static int metronome_init_cmd(struct metronomefb_par *par)
+{
+	int i;
+	u16 cs;
+
+	/* setup init command
+	we can't immediately set the opcode since the controller
+	will try parse the command before we've set it all up
+	so we just set cs here and set the opcode at the end */
+
+	cs = 0xCC20;
+
+	/* set the args ( 2 bytes ) for init */
+	i = 0;
+	par->metromem_cmd->args[i] = 0;
+	cs += par->metromem_cmd->args[i++];
+
+	/* the rest are 0 */
+	memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+
+	par->metromem_cmd->csum = cs;
+	par->metromem_cmd->opcode = 0xCC20; /* init cmd */
+
+	return par->board->met_wait_event(par);
+}
+
+static int metronome_init_regs(struct metronomefb_par *par)
+{
+	int res;
+
+	res = par->board->setup_io(par);
+	if (res)
+		return res;
+
+	res = metronome_powerup_cmd(par);
+	if (res)
+		return res;
+
+	res = metronome_config_cmd(par);
+	if (res)
+		return res;
+
+	res = metronome_init_cmd(par);
+
+	return res;
+}
+
+static void metronomefb_dpy_update(struct metronomefb_par *par)
+{
+	int fbsize;
+	u16 cksum;
+	unsigned char *buf = par->info->screen_buffer;
+
+	fbsize = par->info->fix.smem_len;
+	/* copy from vm to metromem */
+	memcpy(par->metromem_img, buf, fbsize);
+
+	cksum = calc_img_cksum((u16 *) par->metromem_img, fbsize/2);
+	*((u16 *)(par->metromem_img) + fbsize/2) = cksum;
+	metronome_display_cmd(par);
+}
+
+static u16 metronomefb_dpy_update_page(struct metronomefb_par *par, int index)
+{
+	int i;
+	u16 csum = 0;
+	u16 *buf = (u16 *)(par->info->screen_buffer + index);
+	u16 *img = (u16 *)(par->metromem_img + index);
+
+	/* swizzle from vm to metromem and recalc cksum at the same time*/
+	for (i = 0; i < PAGE_SIZE/2; i++) {
+		*(img + i) = (buf[i] << 5) & 0xE0E0;
+		csum += *(img + i);
+	}
+	return csum;
+}
+
+/* this is called back from the deferred io workqueue */
+static void metronomefb_dpy_deferred_io(struct fb_info *info, struct list_head *pagereflist)
+{
+	u16 cksum;
+	struct fb_deferred_io_pageref *pageref;
+	struct metronomefb_par *par = info->par;
+
+	/* walk the written page list and swizzle the data */
+	list_for_each_entry(pageref, pagereflist, list) {
+		unsigned long pgoffset = pageref->offset >> PAGE_SHIFT;
+		cksum = metronomefb_dpy_update_page(par, pageref->offset);
+		par->metromem_img_csum -= par->csum_table[pgoffset];
+		par->csum_table[pgoffset] = cksum;
+		par->metromem_img_csum += cksum;
+	}
+
+	metronome_display_cmd(par);
+}
+
+static void metronomefb_defio_damage_range(struct fb_info *info, off_t off, size_t len)
+{
+	struct metronomefb_par *par = info->par;
+
+	metronomefb_dpy_update(par);
+}
+
+static void metronomefb_defio_damage_area(struct fb_info *info, u32 x, u32 y,
+					  u32 width, u32 height)
+{
+	struct metronomefb_par *par = info->par;
+
+	metronomefb_dpy_update(par);
+}
+
+FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(metronomefb,
+				   metronomefb_defio_damage_range,
+				   metronomefb_defio_damage_area)
+
+static const struct fb_ops metronomefb_ops = {
+	.owner	= THIS_MODULE,
+	FB_DEFAULT_DEFERRED_OPS(metronomefb),
+};
+
+static struct fb_deferred_io metronomefb_defio = {
+	.delay			= HZ,
+	.sort_pagereflist	= true,
+	.deferred_io		= metronomefb_dpy_deferred_io,
+};
+
+static int metronomefb_probe(struct platform_device *dev)
+{
+	struct fb_info *info;
+	struct metronome_board *board;
+	int retval = -ENOMEM;
+	int videomemorysize;
+	unsigned char *videomemory;
+	struct metronomefb_par *par;
+	const struct firmware *fw_entry;
+	int i;
+	int panel_type;
+	int fw, fh;
+	int epd_dt_index;
+
+	/* pick up board specific routines */
+	board = dev->dev.platform_data;
+	if (!board)
+		return -EINVAL;
+
+	/* try to count device specific driver, if can't, platform recalls */
+	if (!try_module_get(board->owner))
+		return -ENODEV;
+
+	info = framebuffer_alloc(sizeof(struct metronomefb_par), &dev->dev);
+	if (!info)
+		goto err;
+
+	/* we have two blocks of memory.
+	info->screen_buffer which is vm, and is the fb used by apps.
+	par->metromem which is physically contiguous memory and
+	contains the display controller commands, waveform,
+	processed image data and padding. this is the data pulled
+	by the device's LCD controller and pushed to Metronome.
+	the metromem memory is allocated by the board driver and
+	is provided to us */
+
+	panel_type = board->get_panel_type();
+	switch (panel_type) {
+	case 6:
+		epd_dt_index = 0;
+		break;
+	case 8:
+		epd_dt_index = 1;
+		break;
+	case 97:
+		epd_dt_index = 2;
+		break;
+	default:
+		dev_err(&dev->dev, "Unexpected panel type. Defaulting to 6\n");
+		epd_dt_index = 0;
+		break;
+	}
+
+	fw = epd_frame_table[epd_dt_index].fw;
+	fh = epd_frame_table[epd_dt_index].fh;
+
+	/* we need to add a spare page because our csum caching scheme walks
+	 * to the end of the page */
+	videomemorysize = PAGE_SIZE + (fw * fh);
+	videomemory = vzalloc(videomemorysize);
+	if (!videomemory)
+		goto err_fb_rel;
+
+	info->screen_buffer = videomemory;
+	info->fbops = &metronomefb_ops;
+
+	metronomefb_fix.line_length = fw;
+	metronomefb_var.xres = fw;
+	metronomefb_var.yres = fh;
+	metronomefb_var.xres_virtual = fw;
+	metronomefb_var.yres_virtual = fh;
+	info->var = metronomefb_var;
+	info->fix = metronomefb_fix;
+	info->fix.smem_len = videomemorysize;
+	par = info->par;
+	par->info = info;
+	par->board = board;
+	par->dt = epd_dt_index;
+	init_waitqueue_head(&par->waitq);
+
+	/* this table caches per page csum values. */
+	par->csum_table = vmalloc(videomemorysize/PAGE_SIZE);
+	if (!par->csum_table)
+		goto err_vfree;
+
+	/* the physical framebuffer that we use is setup by
+	 * the platform device driver. It will provide us
+	 * with cmd, wfm and image memory in a contiguous area. */
+	retval = board->setup_fb(par);
+	if (retval) {
+		dev_err(&dev->dev, "Failed to setup fb\n");
+		goto err_csum_table;
+	}
+
+	/* after this point we should have a framebuffer */
+	if ((!par->metromem_wfm) ||  (!par->metromem_img) ||
+		(!par->metromem_dma)) {
+		dev_err(&dev->dev, "fb access failure\n");
+		retval = -EINVAL;
+		goto err_csum_table;
+	}
+
+	info->fix.smem_start = par->metromem_dma;
+
+	/* load the waveform in. assume mode 3, temp 31 for now
+		a) request the waveform file from userspace
+		b) process waveform and decode into metromem */
+	retval = request_firmware(&fw_entry, "metronome.wbf", &dev->dev);
+	if (retval < 0) {
+		dev_err(&dev->dev, "Failed to get waveform\n");
+		goto err_csum_table;
+	}
+
+	retval = load_waveform((u8 *) fw_entry->data, fw_entry->size, 3, 31,
+				par);
+	release_firmware(fw_entry);
+	if (retval < 0) {
+		dev_err(&dev->dev, "Failed processing waveform\n");
+		goto err_csum_table;
+	}
+
+	retval = board->setup_irq(info);
+	if (retval)
+		goto err_csum_table;
+
+	retval = metronome_init_regs(par);
+	if (retval < 0)
+		goto err_free_irq;
+
+	info->flags = FBINFO_VIRTFB;
+
+	info->fbdefio = &metronomefb_defio;
+	retval = fb_deferred_io_init(info);
+	if (retval)
+		goto err_free_irq;
+
+	retval = fb_alloc_cmap(&info->cmap, 8, 0);
+	if (retval < 0) {
+		dev_err(&dev->dev, "Failed to allocate colormap\n");
+		goto err_fbdefio;
+	}
+
+	/* set cmap */
+	for (i = 0; i < 8; i++)
+		info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/16;
+	memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*8);
+	memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*8);
+
+	retval = register_framebuffer(info);
+	if (retval < 0)
+		goto err_cmap;
+
+	platform_set_drvdata(dev, info);
+
+	dev_dbg(&dev->dev,
+		"fb%d: Metronome frame buffer device, using %dK of video"
+		" memory\n", info->node, videomemorysize >> 10);
+
+	return 0;
+
+err_cmap:
+	fb_dealloc_cmap(&info->cmap);
+err_fbdefio:
+	fb_deferred_io_cleanup(info);
+err_free_irq:
+	board->cleanup(par);
+err_csum_table:
+	vfree(par->csum_table);
+err_vfree:
+	vfree(videomemory);
+err_fb_rel:
+	framebuffer_release(info);
+err:
+	module_put(board->owner);
+	return retval;
+}
+
+static void metronomefb_remove(struct platform_device *dev)
+{
+	struct fb_info *info = platform_get_drvdata(dev);
+
+	if (info) {
+		struct metronomefb_par *par = info->par;
+
+		unregister_framebuffer(info);
+		fb_deferred_io_cleanup(info);
+		fb_dealloc_cmap(&info->cmap);
+		par->board->cleanup(par);
+		vfree(par->csum_table);
+		vfree(info->screen_buffer);
+		module_put(par->board->owner);
+		dev_dbg(&dev->dev, "calling release\n");
+		framebuffer_release(info);
+	}
+}
+
+static struct platform_driver metronomefb_driver = {
+	.probe	= metronomefb_probe,
+	.remove	= metronomefb_remove,
+	.driver	= {
+		.name	= "metronomefb",
+	},
+};
+module_platform_driver(metronomefb_driver);
+
+module_param(user_wfm_size, uint, 0);
+MODULE_PARM_DESC(user_wfm_size, "Set custom waveform size");
+
+MODULE_DESCRIPTION("fbdev driver for Metronome controller");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
+
+MODULE_FIRMWARE("metronome.wbf");
-- 
cgit v1.3.1