From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 24 Aug 2026 08:46:03 -0700
Subject: Merge tag 'pinctrl-v7.3-1' of
 git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...
---
 drivers/video/fbdev/i740fb.c | 1316 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 1316 insertions(+)
 create mode 100644 drivers/video/fbdev/i740fb.c

(limited to 'drivers/video/fbdev/i740fb.c')

diff --git a/drivers/video/fbdev/i740fb.c b/drivers/video/fbdev/i740fb.c
new file mode 100644
index 000000000..c14a19382
--- /dev/null
+++ b/drivers/video/fbdev/i740fb.c
@@ -0,0 +1,1316 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * i740fb - framebuffer driver for Intel740
+ * Copyright (c) 2011 Ondrej Zary
+ *
+ * Based on old i740fb driver (c) 2001-2002 Andrey Ulanov <drey@rt.mipt.ru>
+ * which was partially based on:
+ *  VGA 16-color framebuffer driver (c) 1999 Ben Pfaff <pfaffben@debian.org>
+ *	and Petr Vandrovec <VANDROVE@vc.cvut.cz>
+ *  i740 driver from XFree86 (c) 1998-1999 Precision Insight, Inc., Cedar Park,
+ *	Texas.
+ *  i740fb by Patrick LERDA, v0.9
+ */
+
+#include <linux/aperture.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/console.h>
+#include <video/vga.h>
+
+#include "i740_reg.h"
+
+static char *mode_option;
+static int mtrr = 1;
+
+struct i740fb_par {
+	unsigned char __iomem *regs;
+	bool has_sgram;
+	int wc_cookie;
+	bool ddc_registered;
+	struct i2c_adapter ddc_adapter;
+	struct i2c_algo_bit_data ddc_algo;
+	u32 pseudo_palette[16];
+	struct mutex open_lock;
+	unsigned int ref_count;
+
+	u8 crtc[VGA_CRT_C];
+	u8 atc[VGA_ATT_C];
+	u8 gdc[VGA_GFX_C];
+	u8 seq[VGA_SEQ_C];
+	u8 misc;
+	u8 vss;
+
+	/* i740 specific registers */
+	u8 display_cntl;
+	u8 pixelpipe_cfg0;
+	u8 pixelpipe_cfg1;
+	u8 pixelpipe_cfg2;
+	u8 video_clk2_m;
+	u8 video_clk2_n;
+	u8 video_clk2_mn_msbs;
+	u8 video_clk2_div_sel;
+	u8 pll_cntl;
+	u8 address_mapping;
+	u8 io_cntl;
+	u8 bitblt_cntl;
+	u8 ext_vert_total;
+	u8 ext_vert_disp_end;
+	u8 ext_vert_sync_start;
+	u8 ext_vert_blank_start;
+	u8 ext_horiz_total;
+	u8 ext_horiz_blank;
+	u8 ext_offset;
+	u8 interlace_cntl;
+	u32 lmi_fifo_watermark;
+	u8 ext_start_addr;
+	u8 ext_start_addr_hi;
+};
+
+#define DACSPEED8	203
+#define DACSPEED16	163
+#define DACSPEED24_SG	136
+#define DACSPEED24_SD	128
+#define DACSPEED32	86
+
+static const struct fb_fix_screeninfo i740fb_fix = {
+	.id =		"i740fb",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_TRUECOLOR,
+	.xpanstep =	8,
+	.ypanstep =	1,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static inline void i740outb(struct i740fb_par *par, u16 port, u8 val)
+{
+	vga_mm_w(par->regs, port, val);
+}
+static inline u8 i740inb(struct i740fb_par *par, u16 port)
+{
+	return vga_mm_r(par->regs, port);
+}
+static inline void i740outreg(struct i740fb_par *par, u16 port, u8 reg, u8 val)
+{
+	vga_mm_w_fast(par->regs, port, reg, val);
+}
+static inline u8 i740inreg(struct i740fb_par *par, u16 port, u8 reg)
+{
+	vga_mm_w(par->regs, port, reg);
+	return vga_mm_r(par->regs, port+1);
+}
+static inline void i740outreg_mask(struct i740fb_par *par, u16 port, u8 reg,
+				   u8 val, u8 mask)
+{
+	vga_mm_w_fast(par->regs, port, reg, (val & mask)
+		| (i740inreg(par, port, reg) & ~mask));
+}
+
+#define REG_DDC_DRIVE	0x62
+#define REG_DDC_STATE	0x63
+#define DDC_SCL		(1 << 3)
+#define DDC_SDA		(1 << 2)
+
+static void i740fb_ddc_setscl(void *data, int val)
+{
+	struct i740fb_par *par = data;
+
+	i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SCL, DDC_SCL);
+	i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SCL : 0, DDC_SCL);
+}
+
+static void i740fb_ddc_setsda(void *data, int val)
+{
+	struct i740fb_par *par = data;
+
+	i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SDA, DDC_SDA);
+	i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SDA : 0, DDC_SDA);
+}
+
+static int i740fb_ddc_getscl(void *data)
+{
+	struct i740fb_par *par = data;
+
+	i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SCL);
+
+	return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SCL);
+}
+
+static int i740fb_ddc_getsda(void *data)
+{
+	struct i740fb_par *par = data;
+
+	i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SDA);
+
+	return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SDA);
+}
+
+static int i740fb_setup_ddc_bus(struct fb_info *info)
+{
+	struct i740fb_par *par = info->par;
+
+	strscpy(par->ddc_adapter.name, info->fix.id,
+		sizeof(par->ddc_adapter.name));
+	par->ddc_adapter.owner		= THIS_MODULE;
+	par->ddc_adapter.algo_data	= &par->ddc_algo;
+	par->ddc_adapter.dev.parent	= info->device;
+	par->ddc_algo.setsda		= i740fb_ddc_setsda;
+	par->ddc_algo.setscl		= i740fb_ddc_setscl;
+	par->ddc_algo.getsda		= i740fb_ddc_getsda;
+	par->ddc_algo.getscl		= i740fb_ddc_getscl;
+	par->ddc_algo.udelay		= 10;
+	par->ddc_algo.timeout		= 20;
+	par->ddc_algo.data		= par;
+
+	i2c_set_adapdata(&par->ddc_adapter, par);
+
+	return i2c_bit_add_bus(&par->ddc_adapter);
+}
+
+static int i740fb_open(struct fb_info *info, int user)
+{
+	struct i740fb_par *par = info->par;
+
+	mutex_lock(&(par->open_lock));
+	par->ref_count++;
+	mutex_unlock(&(par->open_lock));
+
+	return 0;
+}
+
+static int i740fb_release(struct fb_info *info, int user)
+{
+	struct i740fb_par *par = info->par;
+
+	mutex_lock(&(par->open_lock));
+	if (par->ref_count == 0) {
+		fb_err(info, "release called with zero refcount\n");
+		mutex_unlock(&(par->open_lock));
+		return -EINVAL;
+	}
+
+	par->ref_count--;
+	mutex_unlock(&(par->open_lock));
+
+	return 0;
+}
+
+static u32 i740_calc_fifo(struct i740fb_par *par, u32 freq, int bpp)
+{
+	/*
+	 * Would like to calculate these values automatically, but a generic
+	 * algorithm does not seem possible.  Note: These FIFO water mark
+	 * values were tested on several cards and seem to eliminate the
+	 * all of the snow and vertical banding, but fine adjustments will
+	 * probably be required for other cards.
+	 */
+
+	u32 wm;
+
+	switch (bpp) {
+	case 8:
+		if	(freq > 200)
+			wm = 0x18120000;
+		else if (freq > 175)
+			wm = 0x16110000;
+		else if (freq > 135)
+			wm = 0x120E0000;
+		else
+			wm = 0x100D0000;
+		break;
+	case 15:
+	case 16:
+		if (par->has_sgram) {
+			if	(freq > 140)
+				wm = 0x2C1D0000;
+			else if (freq > 120)
+				wm = 0x2C180000;
+			else if (freq > 100)
+				wm = 0x24160000;
+			else if (freq >  90)
+				wm = 0x18120000;
+			else if (freq >  50)
+				wm = 0x16110000;
+			else if (freq >  32)
+				wm = 0x13100000;
+			else
+				wm = 0x120E0000;
+		} else {
+			if	(freq > 160)
+				wm = 0x28200000;
+			else if (freq > 140)
+				wm = 0x2A1E0000;
+			else if (freq > 130)
+				wm = 0x2B1A0000;
+			else if (freq > 120)
+				wm = 0x2C180000;
+			else if (freq > 100)
+				wm = 0x24180000;
+			else if (freq >  90)
+				wm = 0x18120000;
+			else if (freq >  50)
+				wm = 0x16110000;
+			else if (freq >  32)
+				wm = 0x13100000;
+			else
+				wm = 0x120E0000;
+		}
+		break;
+	case 24:
+		if (par->has_sgram) {
+			if	(freq > 130)
+				wm = 0x31200000;
+			else if (freq > 120)
+				wm = 0x2E200000;
+			else if (freq > 100)
+				wm = 0x2C1D0000;
+			else if (freq >  80)
+				wm = 0x25180000;
+			else if (freq >  64)
+				wm = 0x24160000;
+			else if (freq >  49)
+				wm = 0x18120000;
+			else if (freq >  32)
+				wm = 0x16110000;
+			else
+				wm = 0x13100000;
+		} else {
+			if	(freq > 120)
+				wm = 0x311F0000;
+			else if (freq > 100)
+				wm = 0x2C1D0000;
+			else if (freq >  80)
+				wm = 0x25180000;
+			else if (freq >  64)
+				wm = 0x24160000;
+			else if (freq >  49)
+				wm = 0x18120000;
+			else if (freq >  32)
+				wm = 0x16110000;
+			else
+				wm = 0x13100000;
+		}
+		break;
+	case 32:
+		if (par->has_sgram) {
+			if	(freq >  80)
+				wm = 0x2A200000;
+			else if (freq >  60)
+				wm = 0x281A0000;
+			else if (freq >  49)
+				wm = 0x25180000;
+			else if (freq >  32)
+				wm = 0x18120000;
+			else
+				wm = 0x16110000;
+		} else {
+			if	(freq >  80)
+				wm = 0x29200000;
+			else if (freq >  60)
+				wm = 0x281A0000;
+			else if (freq >  49)
+				wm = 0x25180000;
+			else if (freq >  32)
+				wm = 0x18120000;
+			else
+				wm = 0x16110000;
+		}
+		break;
+	}
+
+	return wm;
+}
+
+/* clock calculation from i740fb by Patrick LERDA */
+
+#define I740_RFREQ		1000000
+#define TARGET_MAX_N		30
+#define I740_FFIX		(1 << 8)
+#define I740_RFREQ_FIX		(I740_RFREQ / I740_FFIX)
+#define I740_REF_FREQ		(6667 * I740_FFIX / 100)	/* 66.67 MHz */
+#define I740_MAX_VCO_FREQ	(450 * I740_FFIX)		/* 450 MHz */
+
+static void i740_calc_vclk(u32 freq, struct i740fb_par *par)
+{
+	const u32 err_max    = freq / (200  * I740_RFREQ / I740_FFIX);
+	const u32 err_target = freq / (1000 * I740_RFREQ / I740_FFIX);
+	u32 err_best = 512 * I740_FFIX;
+	u32 f_err, f_vco;
+	int m_best = 0, n_best = 0, p_best = 0;
+	int m, n;
+
+	p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX)));
+	f_vco = (freq * (1 << p_best)) / I740_RFREQ_FIX;
+	freq = freq / I740_RFREQ_FIX;
+
+	n = 2;
+	do {
+		n++;
+		m = ((f_vco * n) / I740_REF_FREQ + 2) / 4;
+
+		if (m < 3)
+			m = 3;
+
+		{
+			u32 f_out = (((m * I740_REF_FREQ * 4)
+				 / n) + ((1 << p_best) / 2)) / (1 << p_best);
+
+			f_err = (freq - f_out);
+
+			if (abs(f_err) < err_max) {
+				m_best = m;
+				n_best = n;
+				err_best = f_err;
+			}
+		}
+	} while ((abs(f_err) >= err_target) &&
+		 ((n <= TARGET_MAX_N) || (abs(err_best) > err_max)));
+
+	if (abs(f_err) < err_target) {
+		m_best = m;
+		n_best = n;
+	}
+
+	par->video_clk2_m = (m_best - 2) & 0xFF;
+	par->video_clk2_n = (n_best - 2) & 0xFF;
+	par->video_clk2_mn_msbs = ((((n_best - 2) >> 4) & VCO_N_MSBS)
+				 | (((m_best - 2) >> 8) & VCO_M_MSBS));
+	par->video_clk2_div_sel = ((p_best << 4) | REF_DIV_1);
+}
+
+static int i740fb_decode_var(const struct fb_var_screeninfo *var,
+			     struct i740fb_par *par, struct fb_info *info)
+{
+	/*
+	 * Get the video params out of 'var'.
+	 * If a value doesn't fit, round it up, if it's too big, return -EINVAL.
+	 */
+
+	u32 xres, right, hslen, left, xtotal;
+	u32 yres, lower, vslen, upper, ytotal;
+	u32 vxres, xoffset, vyres, yoffset;
+	u32 bpp, base, dacspeed24, mem, freq;
+	u8 r7;
+	int i;
+
+	dev_dbg(info->device, "decode_var: xres: %i, yres: %i, xres_v: %i, xres_v: %i\n",
+		  var->xres, var->yres, var->xres_virtual, var->xres_virtual);
+	dev_dbg(info->device, "	xoff: %i, yoff: %i, bpp: %i, graysc: %i\n",
+		  var->xoffset, var->yoffset, var->bits_per_pixel,
+		  var->grayscale);
+	dev_dbg(info->device, "	activate: %i, nonstd: %i, vmode: %i\n",
+		  var->activate, var->nonstd, var->vmode);
+	dev_dbg(info->device, "	pixclock: %i, hsynclen:%i, vsynclen:%i\n",
+		  var->pixclock, var->hsync_len, var->vsync_len);
+	dev_dbg(info->device, "	left: %i, right: %i, up:%i, lower:%i\n",
+		  var->left_margin, var->right_margin, var->upper_margin,
+		  var->lower_margin);
+
+
+	bpp = var->bits_per_pixel;
+	switch (bpp) {
+	case 1 ... 8:
+		bpp = 8;
+		if ((1000000 / var->pixclock) > DACSPEED8) {
+			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 8bpp)\n",
+				1000000 / var->pixclock, DACSPEED8);
+			return -EINVAL;
+		}
+		break;
+	case 9 ... 15:
+		bpp = 15;
+		fallthrough;
+	case 16:
+		if ((1000000 / var->pixclock) > DACSPEED16) {
+			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 15/16bpp)\n",
+				1000000 / var->pixclock, DACSPEED16);
+			return -EINVAL;
+		}
+		break;
+	case 17 ... 24:
+		bpp = 24;
+		dacspeed24 = par->has_sgram ? DACSPEED24_SG : DACSPEED24_SD;
+		if ((1000000 / var->pixclock) > dacspeed24) {
+			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 24bpp)\n",
+				1000000 / var->pixclock, dacspeed24);
+			return -EINVAL;
+		}
+		break;
+	case 25 ... 32:
+		bpp = 32;
+		if ((1000000 / var->pixclock) > DACSPEED32) {
+			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 32bpp)\n",
+				1000000 / var->pixclock, DACSPEED32);
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	xres = ALIGN(var->xres, 8);
+	vxres = ALIGN(var->xres_virtual, 16);
+	if (vxres < xres)
+		vxres = xres;
+
+	xoffset = ALIGN(var->xoffset, 8);
+	if (xres + xoffset > vxres)
+		xoffset = vxres - xres;
+
+	left = ALIGN(var->left_margin, 8);
+	right = ALIGN(var->right_margin, 8);
+	hslen = ALIGN(var->hsync_len, 8);
+
+	yres = var->yres;
+	vyres = var->yres_virtual;
+	if (yres > vyres)
+		vyres = yres;
+
+	yoffset = var->yoffset;
+	if (yres + yoffset > vyres)
+		yoffset = vyres - yres;
+
+	lower = var->lower_margin;
+	vslen = var->vsync_len;
+	upper = var->upper_margin;
+
+	mem = vxres * vyres * ((bpp + 1) / 8);
+	if (mem > info->screen_size) {
+		dev_err(info->device, "not enough video memory (%d KB requested, %ld KB available)\n",
+			mem >> 10, info->screen_size >> 10);
+		return -ENOMEM;
+	}
+
+	if (yoffset + yres > vyres)
+		yoffset = vyres - yres;
+
+	xtotal = xres + right + hslen + left;
+	ytotal = yres + lower + vslen + upper;
+
+	par->crtc[VGA_CRTC_H_TOTAL] = (xtotal >> 3) - 5;
+	par->crtc[VGA_CRTC_H_DISP] = (xres >> 3) - 1;
+	par->crtc[VGA_CRTC_H_BLANK_START] = ((xres + right) >> 3) - 1;
+	par->crtc[VGA_CRTC_H_SYNC_START] = (xres + right) >> 3;
+	par->crtc[VGA_CRTC_H_SYNC_END] = (((xres + right + hslen) >> 3) & 0x1F)
+		| ((((xres + right + hslen) >> 3) & 0x20) << 2);
+	par->crtc[VGA_CRTC_H_BLANK_END] = ((xres + right + hslen) >> 3 & 0x1F)
+		| 0x80;
+
+	par->crtc[VGA_CRTC_V_TOTAL] = ytotal - 2;
+
+	r7 = 0x10;	/* disable linecompare */
+	if (ytotal & 0x100)
+		r7 |= 0x01;
+	if (ytotal & 0x200)
+		r7 |= 0x20;
+
+	par->crtc[VGA_CRTC_PRESET_ROW] = 0;
+	par->crtc[VGA_CRTC_MAX_SCAN] = 0x40;	/* 1 scanline, no linecmp */
+	if (var->vmode & FB_VMODE_DOUBLE)
+		par->crtc[VGA_CRTC_MAX_SCAN] |= 0x80;
+	par->crtc[VGA_CRTC_CURSOR_START] = 0x00;
+	par->crtc[VGA_CRTC_CURSOR_END] = 0x00;
+	par->crtc[VGA_CRTC_CURSOR_HI] = 0x00;
+	par->crtc[VGA_CRTC_CURSOR_LO] = 0x00;
+	par->crtc[VGA_CRTC_V_DISP_END] = yres-1;
+	if ((yres-1) & 0x100)
+		r7 |= 0x02;
+	if ((yres-1) & 0x200)
+		r7 |= 0x40;
+
+	par->crtc[VGA_CRTC_V_BLANK_START] = yres + lower - 1;
+	par->crtc[VGA_CRTC_V_SYNC_START] = yres + lower - 1;
+	if ((yres + lower - 1) & 0x100)
+		r7 |= 0x0C;
+	if ((yres + lower - 1) & 0x200) {
+		par->crtc[VGA_CRTC_MAX_SCAN] |= 0x20;
+		r7 |= 0x80;
+	}
+
+	/* disabled IRQ */
+	par->crtc[VGA_CRTC_V_SYNC_END] =
+		((yres + lower - 1 + vslen) & 0x0F) & ~0x10;
+	/* 0x7F for VGA, but some SVGA chips require all 8 bits to be set */
+	par->crtc[VGA_CRTC_V_BLANK_END] = (yres + lower - 1 + vslen) & 0xFF;
+
+	par->crtc[VGA_CRTC_UNDERLINE] = 0x00;
+	par->crtc[VGA_CRTC_MODE] = 0xC3 ;
+	par->crtc[VGA_CRTC_LINE_COMPARE] = 0xFF;
+	par->crtc[VGA_CRTC_OVERFLOW] = r7;
+
+	par->vss = 0x00;	/* 3DA */
+
+	for (i = 0x00; i < 0x10; i++)
+		par->atc[i] = i;
+	par->atc[VGA_ATC_MODE] = 0x81;
+	par->atc[VGA_ATC_OVERSCAN] = 0x00;	/* 0 for EGA, 0xFF for VGA */
+	par->atc[VGA_ATC_PLANE_ENABLE] = 0x0F;
+	par->atc[VGA_ATC_COLOR_PAGE] = 0x00;
+
+	par->misc = 0xC3;
+	if (var->sync & FB_SYNC_HOR_HIGH_ACT)
+		par->misc &= ~0x40;
+	if (var->sync & FB_SYNC_VERT_HIGH_ACT)
+		par->misc &= ~0x80;
+
+	par->seq[VGA_SEQ_CLOCK_MODE] = 0x01;
+	par->seq[VGA_SEQ_PLANE_WRITE] = 0x0F;
+	par->seq[VGA_SEQ_CHARACTER_MAP] = 0x00;
+	par->seq[VGA_SEQ_MEMORY_MODE] = 0x06;
+
+	par->gdc[VGA_GFX_SR_VALUE] = 0x00;
+	par->gdc[VGA_GFX_SR_ENABLE] = 0x00;
+	par->gdc[VGA_GFX_COMPARE_VALUE] = 0x00;
+	par->gdc[VGA_GFX_DATA_ROTATE] = 0x00;
+	par->gdc[VGA_GFX_PLANE_READ] = 0;
+	par->gdc[VGA_GFX_MODE] = 0x02;
+	par->gdc[VGA_GFX_MISC] = 0x05;
+	par->gdc[VGA_GFX_COMPARE_MASK] = 0x0F;
+	par->gdc[VGA_GFX_BIT_MASK] = 0xFF;
+
+	base = (yoffset * vxres + (xoffset & ~7)) >> 2;
+	switch (bpp) {
+	case 8:
+		par->crtc[VGA_CRTC_OFFSET] = vxres >> 3;
+		par->ext_offset = vxres >> 11;
+		par->pixelpipe_cfg1 = DISPLAY_8BPP_MODE;
+		par->bitblt_cntl = COLEXP_8BPP;
+		break;
+	case 15: /* 0rrrrrgg gggbbbbb */
+	case 16: /* rrrrrggg gggbbbbb */
+		par->pixelpipe_cfg1 = (var->green.length == 6) ?
+			DISPLAY_16BPP_MODE : DISPLAY_15BPP_MODE;
+		par->crtc[VGA_CRTC_OFFSET] = vxres >> 2;
+		par->ext_offset = vxres >> 10;
+		par->bitblt_cntl = COLEXP_16BPP;
+		base *= 2;
+		break;
+	case 24:
+		par->crtc[VGA_CRTC_OFFSET] = (vxres * 3) >> 3;
+		par->ext_offset = (vxres * 3) >> 11;
+		par->pixelpipe_cfg1 = DISPLAY_24BPP_MODE;
+		par->bitblt_cntl = COLEXP_24BPP;
+		base &= 0xFFFFFFFE; /* ...ignore the last bit. */
+		base *= 3;
+		break;
+	case 32:
+		par->crtc[VGA_CRTC_OFFSET] = vxres >> 1;
+		par->ext_offset = vxres >> 9;
+		par->pixelpipe_cfg1 = DISPLAY_32BPP_MODE;
+		par->bitblt_cntl = COLEXP_RESERVED; /* Unimplemented on i740 */
+		base *= 4;
+		break;
+	}
+
+	par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF;
+	par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >>  8;
+	par->ext_start_addr =
+		((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE;
+	par->ext_start_addr_hi = (base & 0x3FC00000) >> 22;
+
+	par->pixelpipe_cfg0 = DAC_8_BIT;
+
+	par->pixelpipe_cfg2 = DISPLAY_GAMMA_ENABLE | OVERLAY_GAMMA_ENABLE;
+	par->io_cntl = EXTENDED_CRTC_CNTL;
+	par->address_mapping = LINEAR_MODE_ENABLE | PAGE_MAPPING_ENABLE;
+	par->display_cntl = HIRES_MODE;
+
+	/* Set the MCLK freq */
+	par->pll_cntl = PLL_MEMCLK_100000KHZ; /* 100 MHz -- use as default */
+
+	/* Calculate the extended CRTC regs */
+	par->ext_vert_total = (ytotal - 2) >> 8;
+	par->ext_vert_disp_end = (yres - 1) >> 8;
+	par->ext_vert_sync_start = (yres + lower) >> 8;
+	par->ext_vert_blank_start = (yres + lower) >> 8;
+	par->ext_horiz_total = ((xtotal >> 3) - 5) >> 8;
+	par->ext_horiz_blank = (((xres + right) >> 3) & 0x40) >> 6;
+
+	par->interlace_cntl = INTERLACE_DISABLE;
+
+	/* Set the overscan color to 0. (NOTE: This only affects >8bpp mode) */
+	par->atc[VGA_ATC_OVERSCAN] = 0;
+
+	/* Calculate VCLK that most closely matches the requested dot clock */
+	freq = (((u32)1e9) / var->pixclock) * (u32)(1e3);
+	if (freq < I740_RFREQ_FIX) {
+		fb_dbg(info, "invalid pixclock\n");
+		freq = I740_RFREQ_FIX;
+	}
+	i740_calc_vclk(freq, par);
+
+	/* Since we program the clocks ourselves, always use VCLK2. */
+	par->misc |= 0x0C;
+
+	/* Calculate the FIFO Watermark and Burst Length. */
+	par->lmi_fifo_watermark =
+		i740_calc_fifo(par, 1000000 / var->pixclock, bpp);
+
+	return 0;
+}
+
+static int i740fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	if (!var->pixclock)
+		return -EINVAL;
+
+	switch (var->bits_per_pixel) {
+	case 8:
+		var->red.offset	= var->green.offset = var->blue.offset = 0;
+		var->red.length	= var->green.length = var->blue.length = 8;
+		break;
+	case 16:
+		switch (var->green.length) {
+		default:
+		case 5:
+			var->red.offset = 10;
+			var->green.offset = 5;
+			var->blue.offset = 0;
+			var->red.length	= 5;
+			var->green.length = 5;
+			var->blue.length = 5;
+			break;
+		case 6:
+			var->red.offset = 11;
+			var->green.offset = 5;
+			var->blue.offset = 0;
+			var->red.length = var->blue.length = 5;
+			break;
+		}
+		break;
+	case 24:
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length	= var->green.length = var->blue.length = 8;
+		break;
+	case 32:
+		var->transp.offset = 24;
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->transp.length = 8;
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (var->xres > var->xres_virtual)
+		var->xres_virtual = var->xres;
+
+	if (var->yres > var->yres_virtual)
+		var->yres_virtual = var->yres;
+
+	if (info->monspecs.hfmax && info->monspecs.vfmax &&
+	    info->monspecs.dclkmax && fb_validate_mode(var, info) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void vga_protect(struct i740fb_par *par)
+{
+	/* disable the display */
+	i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20);
+
+	i740inb(par, 0x3DA);
+	i740outb(par, VGA_ATT_W, 0x00);	/* enable palette access */
+}
+
+static void vga_unprotect(struct i740fb_par *par)
+{
+	/* reenable display */
+	i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20);
+
+	i740inb(par, 0x3DA);
+	i740outb(par, VGA_ATT_W, 0x20);	/* disable palette access */
+}
+
+static int i740fb_set_par(struct fb_info *info)
+{
+	struct i740fb_par *par = info->par;
+	u32 itemp;
+	int i;
+
+	i = i740fb_decode_var(&info->var, par, info);
+	if (i)
+		return i;
+
+	memset_io(info->screen_base, 0, info->screen_size);
+
+	vga_protect(par);
+
+	i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_DISABLE);
+
+	mdelay(1);
+
+	i740outreg(par, XRX, VCLK2_VCO_M, par->video_clk2_m);
+	i740outreg(par, XRX, VCLK2_VCO_N, par->video_clk2_n);
+	i740outreg(par, XRX, VCLK2_VCO_MN_MSBS, par->video_clk2_mn_msbs);
+	i740outreg(par, XRX, VCLK2_VCO_DIV_SEL, par->video_clk2_div_sel);
+
+	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0,
+			par->pixelpipe_cfg0 & DAC_8_BIT, 0x80);
+
+	i740inb(par, 0x3DA);
+	i740outb(par, 0x3C0, 0x00);
+
+	/* update misc output register */
+	i740outb(par, VGA_MIS_W, par->misc | 0x01);
+
+	/* synchronous reset on */
+	i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x01);
+	/* write sequencer registers */
+	i740outreg(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE,
+			par->seq[VGA_SEQ_CLOCK_MODE] | 0x20);
+	for (i = 2; i < VGA_SEQ_C; i++)
+		i740outreg(par, VGA_SEQ_I, i, par->seq[i]);
+
+	/* synchronous reset off */
+	i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x03);
+
+	/* deprotect CRT registers 0-7 */
+	i740outreg(par, VGA_CRT_IC, VGA_CRTC_V_SYNC_END,
+			par->crtc[VGA_CRTC_V_SYNC_END]);
+
+	/* write CRT registers */
+	for (i = 0; i < VGA_CRT_C; i++)
+		i740outreg(par, VGA_CRT_IC, i, par->crtc[i]);
+
+	/* write graphics controller registers */
+	for (i = 0; i < VGA_GFX_C; i++)
+		i740outreg(par, VGA_GFX_I, i, par->gdc[i]);
+
+	/* write attribute controller registers */
+	for (i = 0; i < VGA_ATT_C; i++) {
+		i740inb(par, VGA_IS1_RC);		/* reset flip-flop */
+		i740outb(par, VGA_ATT_IW, i);
+		i740outb(par, VGA_ATT_IW, par->atc[i]);
+	}
+
+	i740inb(par, VGA_IS1_RC);
+	i740outb(par, VGA_ATT_IW, 0x20);
+
+	i740outreg(par, VGA_CRT_IC, EXT_VERT_TOTAL, par->ext_vert_total);
+	i740outreg(par, VGA_CRT_IC, EXT_VERT_DISPLAY, par->ext_vert_disp_end);
+	i740outreg(par, VGA_CRT_IC, EXT_VERT_SYNC_START,
+			par->ext_vert_sync_start);
+	i740outreg(par, VGA_CRT_IC, EXT_VERT_BLANK_START,
+			par->ext_vert_blank_start);
+	i740outreg(par, VGA_CRT_IC, EXT_HORIZ_TOTAL, par->ext_horiz_total);
+	i740outreg(par, VGA_CRT_IC, EXT_HORIZ_BLANK, par->ext_horiz_blank);
+	i740outreg(par, VGA_CRT_IC, EXT_OFFSET, par->ext_offset);
+	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, par->ext_start_addr_hi);
+	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, par->ext_start_addr);
+
+	i740outreg_mask(par, VGA_CRT_IC, INTERLACE_CNTL,
+			par->interlace_cntl, INTERLACE_ENABLE);
+	i740outreg_mask(par, XRX, ADDRESS_MAPPING, par->address_mapping, 0x1F);
+	i740outreg_mask(par, XRX, BITBLT_CNTL, par->bitblt_cntl, COLEXP_MODE);
+	i740outreg_mask(par, XRX, DISPLAY_CNTL,
+			par->display_cntl, VGA_WRAP_MODE | GUI_MODE);
+	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, par->pixelpipe_cfg0, 0x9B);
+	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_2, par->pixelpipe_cfg2, 0x0C);
+
+	i740outreg(par, XRX, PLL_CNTL, par->pll_cntl);
+
+	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_1,
+			par->pixelpipe_cfg1, DISPLAY_COLOR_MODE);
+
+	itemp = readl(par->regs + FWATER_BLC);
+	itemp &= ~(LMI_BURST_LENGTH | LMI_FIFO_WATERMARK);
+	itemp |= par->lmi_fifo_watermark;
+	writel(itemp, par->regs + FWATER_BLC);
+
+	i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_60HZ);
+
+	i740outreg_mask(par, MRX, COL_KEY_CNTL_1, 0, BLANK_DISP_OVERLAY);
+	i740outreg_mask(par, XRX, IO_CTNL,
+			par->io_cntl, EXTENDED_ATTR_CNTL | EXTENDED_CRTC_CNTL);
+
+	if (par->pixelpipe_cfg1 != DISPLAY_8BPP_MODE) {
+		i740outb(par, VGA_PEL_MSK, 0xFF);
+		i740outb(par, VGA_PEL_IW, 0x00);
+		for (i = 0; i < 256; i++) {
+			itemp = (par->pixelpipe_cfg0 & DAC_8_BIT) ? i : i >> 2;
+			i740outb(par, VGA_PEL_D, itemp);
+			i740outb(par, VGA_PEL_D, itemp);
+			i740outb(par, VGA_PEL_D, itemp);
+		}
+	}
+
+	/* Wait for screen to stabilize. */
+	mdelay(50);
+	vga_unprotect(par);
+
+	info->fix.line_length =
+			info->var.xres_virtual * info->var.bits_per_pixel / 8;
+	if (info->var.bits_per_pixel == 8)
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+	return 0;
+}
+
+static int i740fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			   unsigned blue, unsigned transp,
+			   struct fb_info *info)
+{
+	u32 r, g, b;
+
+	dev_dbg(info->device, "setcolreg: regno: %i, red=%d, green=%d, blue=%d, transp=%d, bpp=%d\n",
+		regno, red, green, blue, transp, info->var.bits_per_pixel);
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_PSEUDOCOLOR:
+		if (regno >= 256)
+			return -EINVAL;
+		i740outb(info->par, VGA_PEL_IW, regno);
+		i740outb(info->par, VGA_PEL_D, red >> 8);
+		i740outb(info->par, VGA_PEL_D, green >> 8);
+		i740outb(info->par, VGA_PEL_D, blue >> 8);
+		break;
+	case FB_VISUAL_TRUECOLOR:
+		if (regno >= 16)
+			return -EINVAL;
+		r = (red >> (16 - info->var.red.length))
+			<< info->var.red.offset;
+		b = (blue >> (16 - info->var.blue.length))
+			<< info->var.blue.offset;
+		g = (green >> (16 - info->var.green.length))
+			<< info->var.green.offset;
+		((u32 *) info->pseudo_palette)[regno] = r | g | b;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int i740fb_pan_display(struct fb_var_screeninfo *var,
+				 struct fb_info *info)
+{
+	struct i740fb_par *par = info->par;
+	u32 base = (var->yoffset * info->var.xres_virtual
+		 + (var->xoffset & ~7)) >> 2;
+
+	dev_dbg(info->device, "pan_display: xoffset: %i yoffset: %i base: %i\n",
+		var->xoffset, var->yoffset, base);
+
+	switch (info->var.bits_per_pixel) {
+	case 8:
+		break;
+	case 15:
+	case 16:
+		base *= 2;
+		break;
+	case 24:
+		/*
+		 * The last bit does not seem to have any effect on the start
+		 * address register in 24bpp mode, so...
+		 */
+		base &= 0xFFFFFFFE; /* ...ignore the last bit. */
+		base *= 3;
+		break;
+	case 32:
+		base *= 4;
+		break;
+	}
+
+	par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF;
+	par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >>  8;
+	par->ext_start_addr_hi = (base & 0x3FC00000) >> 22;
+	par->ext_start_addr =
+			((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE;
+
+	i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_LO,  base & 0x000000FF);
+	i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_HI,
+			(base & 0x0000FF00) >> 8);
+	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI,
+			(base & 0x3FC00000) >> 22);
+	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR,
+			((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE);
+
+	return 0;
+}
+
+static int i740fb_blank(int blank_mode, struct fb_info *info)
+{
+	struct i740fb_par *par = info->par;
+
+	unsigned char SEQ01;
+	int DPMSSyncSelect;
+
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+	case FB_BLANK_NORMAL:
+		SEQ01 = 0x00;
+		DPMSSyncSelect = HSYNC_ON | VSYNC_ON;
+		break;
+	case FB_BLANK_VSYNC_SUSPEND:
+		SEQ01 = 0x20;
+		DPMSSyncSelect = HSYNC_ON | VSYNC_OFF;
+		break;
+	case FB_BLANK_HSYNC_SUSPEND:
+		SEQ01 = 0x20;
+		DPMSSyncSelect = HSYNC_OFF | VSYNC_ON;
+		break;
+	case FB_BLANK_POWERDOWN:
+		SEQ01 = 0x20;
+		DPMSSyncSelect = HSYNC_OFF | VSYNC_OFF;
+		break;
+	default:
+		return -EINVAL;
+	}
+	/* Turn the screen on/off */
+	i740outb(par, SRX, 0x01);
+	SEQ01 |= i740inb(par, SRX + 1) & ~0x20;
+	i740outb(par, SRX, 0x01);
+	i740outb(par, SRX + 1, SEQ01);
+
+	/* Set the DPMS mode */
+	i740outreg(par, XRX, DPMS_SYNC_SELECT, DPMSSyncSelect);
+
+	/* Let fbcon do a soft blank for us */
+	return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
+}
+
+static const struct fb_ops i740fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_open	= i740fb_open,
+	.fb_release	= i740fb_release,
+	FB_DEFAULT_IOMEM_OPS,
+	.fb_check_var	= i740fb_check_var,
+	.fb_set_par	= i740fb_set_par,
+	.fb_setcolreg	= i740fb_setcolreg,
+	.fb_blank	= i740fb_blank,
+	.fb_pan_display	= i740fb_pan_display,
+};
+
+/* ------------------------------------------------------------------------- */
+
+static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+	struct fb_info *info;
+	struct i740fb_par *par;
+	int ret, tmp;
+	bool found = false;
+	u8 *edid;
+
+	ret = aperture_remove_conflicting_pci_devices(dev, "i740fb");
+	if (ret)
+		return ret;
+
+	info = framebuffer_alloc(sizeof(struct i740fb_par), &(dev->dev));
+	if (!info)
+		return -ENOMEM;
+
+	par = info->par;
+	mutex_init(&par->open_lock);
+
+	info->var.activate = FB_ACTIVATE_NOW;
+	info->var.bits_per_pixel = 8;
+	info->fbops = &i740fb_ops;
+	info->pseudo_palette = par->pseudo_palette;
+
+	ret = pci_enable_device(dev);
+	if (ret) {
+		dev_err(info->device, "cannot enable PCI device\n");
+		goto err_enable_device;
+	}
+
+	ret = pci_request_regions(dev, info->fix.id);
+	if (ret) {
+		dev_err(info->device, "error requesting regions\n");
+		goto err_request_regions;
+	}
+
+	info->screen_base = pci_ioremap_wc_bar(dev, 0);
+	if (!info->screen_base) {
+		dev_err(info->device, "error remapping base\n");
+		ret = -ENOMEM;
+		goto err_ioremap_1;
+	}
+
+	par->regs = pci_ioremap_bar(dev, 1);
+	if (!par->regs) {
+		dev_err(info->device, "error remapping MMIO\n");
+		ret = -ENOMEM;
+		goto err_ioremap_2;
+	}
+
+	/* detect memory size */
+	if ((i740inreg(par, XRX, DRAM_ROW_TYPE) & DRAM_ROW_1)
+							== DRAM_ROW_1_SDRAM)
+		i740outb(par, XRX, DRAM_ROW_BNDRY_1);
+	else
+		i740outb(par, XRX, DRAM_ROW_BNDRY_0);
+	info->screen_size = i740inb(par, XRX + 1) * 1024 * 1024;
+	/* detect memory type */
+	tmp = i740inreg(par, XRX, DRAM_ROW_CNTL_LO);
+	par->has_sgram = !((tmp & DRAM_RAS_TIMING) ||
+			   (tmp & DRAM_RAS_PRECHARGE));
+
+	fb_info(info, "Intel740 on %s, %ld KB %s\n",
+		pci_name(dev), info->screen_size >> 10,
+		par->has_sgram ? "SGRAM" : "SDRAM");
+
+	info->fix = i740fb_fix;
+	info->fix.mmio_start = pci_resource_start(dev, 1);
+	info->fix.mmio_len = pci_resource_len(dev, 1);
+	info->fix.smem_start = pci_resource_start(dev, 0);
+	info->fix.smem_len = info->screen_size;
+	info->flags = FBINFO_HWACCEL_YPAN;
+
+	if (i740fb_setup_ddc_bus(info) == 0) {
+		par->ddc_registered = true;
+		edid = fb_ddc_read(&par->ddc_adapter);
+		if (edid) {
+			fb_edid_to_monspecs(edid, &info->monspecs);
+			kfree(edid);
+			if (!info->monspecs.modedb)
+				dev_err(info->device,
+					"error getting mode database\n");
+			else {
+				const struct fb_videomode *m;
+
+				fb_videomode_to_modelist(
+					info->monspecs.modedb,
+					info->monspecs.modedb_len,
+					&info->modelist);
+				m = fb_find_best_display(&info->monspecs,
+							 &info->modelist);
+				if (m) {
+					fb_videomode_to_var(&info->var, m);
+					/* fill all other info->var's fields */
+					if (!i740fb_check_var(&info->var, info))
+						found = true;
+				}
+			}
+		}
+	}
+
+	if (!mode_option && !found)
+		mode_option = "640x480-8@60";
+
+	if (mode_option) {
+		ret = fb_find_mode(&info->var, info, mode_option,
+				   info->monspecs.modedb,
+				   info->monspecs.modedb_len,
+				   NULL, info->var.bits_per_pixel);
+		if (!ret || ret == 4) {
+			dev_err(info->device, "mode %s not found\n",
+				mode_option);
+			ret = -EINVAL;
+		}
+	}
+
+	fb_destroy_modedb(info->monspecs.modedb);
+	info->monspecs.modedb = NULL;
+
+	/* maximize virtual vertical size for fast scrolling */
+	info->var.yres_virtual = info->fix.smem_len * 8 /
+			(info->var.bits_per_pixel * info->var.xres_virtual);
+
+	if (ret == -EINVAL)
+		goto err_find_mode;
+
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (ret) {
+		dev_err(info->device, "cannot allocate colormap\n");
+		goto err_alloc_cmap;
+	}
+
+	ret = register_framebuffer(info);
+	if (ret) {
+		dev_err(info->device, "error registering framebuffer\n");
+		goto err_reg_framebuffer;
+	}
+
+	fb_info(info, "%s frame buffer device\n", info->fix.id);
+	pci_set_drvdata(dev, info);
+	if (mtrr)
+		par->wc_cookie = arch_phys_wc_add(info->fix.smem_start,
+						  info->fix.smem_len);
+	return 0;
+
+err_reg_framebuffer:
+	fb_dealloc_cmap(&info->cmap);
+err_alloc_cmap:
+err_find_mode:
+	fb_destroy_modelist(&info->modelist);
+	if (par->ddc_registered)
+		i2c_del_adapter(&par->ddc_adapter);
+	pci_iounmap(dev, par->regs);
+err_ioremap_2:
+	pci_iounmap(dev, info->screen_base);
+err_ioremap_1:
+	pci_release_regions(dev);
+err_request_regions:
+/*	pci_disable_device(dev); */
+err_enable_device:
+	framebuffer_release(info);
+	return ret;
+}
+
+static void i740fb_remove(struct pci_dev *dev)
+{
+	struct fb_info *info = pci_get_drvdata(dev);
+
+	if (info) {
+		struct i740fb_par *par = info->par;
+		arch_phys_wc_del(par->wc_cookie);
+		unregister_framebuffer(info);
+		fb_dealloc_cmap(&info->cmap);
+		if (par->ddc_registered)
+			i2c_del_adapter(&par->ddc_adapter);
+		pci_iounmap(dev, par->regs);
+		pci_iounmap(dev, info->screen_base);
+		pci_release_regions(dev);
+/*		pci_disable_device(dev); */
+		framebuffer_release(info);
+	}
+}
+
+static int __maybe_unused i740fb_suspend(struct device *dev)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct i740fb_par *par = info->par;
+
+	console_lock();
+	mutex_lock(&(par->open_lock));
+
+	/* do nothing if framebuffer is not active */
+	if (par->ref_count == 0) {
+		mutex_unlock(&(par->open_lock));
+		console_unlock();
+		return 0;
+	}
+
+	fb_set_suspend(info, 1);
+
+	mutex_unlock(&(par->open_lock));
+	console_unlock();
+
+	return 0;
+}
+
+static int __maybe_unused i740fb_resume(struct device *dev)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct i740fb_par *par = info->par;
+
+	console_lock();
+	mutex_lock(&(par->open_lock));
+
+	if (par->ref_count == 0)
+		goto fail;
+
+	i740fb_set_par(info);
+	fb_set_suspend(info, 0);
+
+fail:
+	mutex_unlock(&(par->open_lock));
+	console_unlock();
+	return 0;
+}
+
+static const struct dev_pm_ops i740fb_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= i740fb_suspend,
+	.resume		= i740fb_resume,
+	.freeze		= NULL,
+	.thaw		= i740fb_resume,
+	.poweroff	= i740fb_suspend,
+	.restore	= i740fb_resume,
+#endif /* CONFIG_PM_SLEEP */
+};
+
+#define I740_ID_PCI 0x00d1
+#define I740_ID_AGP 0x7800
+
+static const struct pci_device_id i740fb_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_PCI) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_AGP) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, i740fb_id_table);
+
+static struct pci_driver i740fb_driver = {
+	.name		= "i740fb",
+	.id_table	= i740fb_id_table,
+	.probe		= i740fb_probe,
+	.remove		= i740fb_remove,
+	.driver.pm	= &i740fb_pm_ops,
+};
+
+#ifndef MODULE
+static int  __init i740fb_setup(char *options)
+{
+	char *opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((opt = strsep(&options, ",")) != NULL) {
+		if (!*opt)
+			continue;
+		else if (!strncmp(opt, "mtrr:", 5))
+			mtrr = simple_strtoul(opt + 5, NULL, 0);
+		else
+			mode_option = opt;
+	}
+
+	return 0;
+}
+#endif
+
+static int __init i740fb_init(void)
+{
+#ifndef MODULE
+	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("i740fb"))
+		return -ENODEV;
+
+#ifndef MODULE
+	if (fb_get_options("i740fb", &option))
+		return -ENODEV;
+	i740fb_setup(option);
+#endif
+
+	return pci_register_driver(&i740fb_driver);
+}
+
+static void __exit i740fb_exit(void)
+{
+	pci_unregister_driver(&i740fb_driver);
+}
+
+module_init(i740fb_init);
+module_exit(i740fb_exit);
+
+MODULE_AUTHOR("(c) 2011 Ondrej Zary <linux@rainbow-software.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("fbdev driver for Intel740");
+
+module_param(mode_option, charp, 0444);
+MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
+
+module_param(mtrr, int, 0444);
+MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
-- 
cgit v1.3.1