From 0102c8c7fdfc4bd700971daff2b94470f4eafae4 Mon Sep 17 00:00:00 2001
From: Dapeng Mi <dapeng1.mi@linux.intel.com>
Date: Thu, 17 Sep 2026 09:52:33 +0800
Subject: perf/x86/intel: Rename DMR offcore_rsp attribute to offmodule_rsp

DMR introduces Offmodule Response events in place of the legacy
Offcore Response events, but it still exposes the inherited
offcore_rsp PMU attribute for programming the corresponding MSR data.

Rename the DMR PMU attribute to offmodule_rsp so the sysfs interface
matches the underlying event name and avoids user & tooling confusion.

Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20260917015234.981153-12-dapeng1.mi@linux.intel.com
---
 drivers/video/backlight/ili9320.c | 298 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 298 insertions(+)
 create mode 100644 drivers/video/backlight/ili9320.c

(limited to 'drivers/video/backlight/ili9320.c')

diff --git a/drivers/video/backlight/ili9320.c b/drivers/video/backlight/ili9320.c
new file mode 100644
index 000000000..2df96a882
--- /dev/null
+++ b/drivers/video/backlight/ili9320.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* drivers/video/backlight/ili9320.c
+ *
+ * ILI9320 LCD controller driver core.
+ *
+ * Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+*/
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/lcd.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/spi/spi.h>
+
+#include <video/ili9320.h>
+
+#include "ili9320.h"
+
+
+static inline int ili9320_write_spi(struct ili9320 *ili,
+				    unsigned int reg,
+				    unsigned int value)
+{
+	struct ili9320_spi *spi = &ili->access.spi;
+	unsigned char *addr = spi->buffer_addr;
+	unsigned char *data = spi->buffer_data;
+
+	/* spi message consits of:
+	 * first byte: ID and operation
+	 */
+
+	addr[0] = spi->id | ILI9320_SPI_INDEX | ILI9320_SPI_WRITE;
+	addr[1] = reg >> 8;
+	addr[2] = reg;
+
+	/* second message is the data to transfer */
+
+	data[0] = spi->id | ILI9320_SPI_DATA  | ILI9320_SPI_WRITE;
+	data[1] = value >> 8;
+	data[2] = value;
+
+	return spi_sync(spi->dev, &spi->message);
+}
+
+int ili9320_write(struct ili9320 *ili, unsigned int reg, unsigned int value)
+{
+	dev_dbg(ili->dev, "write: reg=%02x, val=%04x\n", reg, value);
+	return ili->write(ili, reg, value);
+}
+EXPORT_SYMBOL_GPL(ili9320_write);
+
+int ili9320_write_regs(struct ili9320 *ili,
+		       const struct ili9320_reg *values,
+		       int nr_values)
+{
+	int index;
+	int ret;
+
+	for (index = 0; index < nr_values; index++, values++) {
+		ret = ili9320_write(ili, values->address, values->value);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ili9320_write_regs);
+
+static void ili9320_reset(struct ili9320 *lcd)
+{
+	struct ili9320_platdata *cfg = lcd->platdata;
+
+	cfg->reset(1);
+	mdelay(50);
+
+	cfg->reset(0);
+	mdelay(50);
+
+	cfg->reset(1);
+	mdelay(100);
+}
+
+static inline int ili9320_init_chip(struct ili9320 *lcd)
+{
+	int ret;
+
+	ili9320_reset(lcd);
+
+	ret = lcd->client->init(lcd, lcd->platdata);
+	if (ret != 0) {
+		dev_err(lcd->dev, "failed to initialise display\n");
+		return ret;
+	}
+
+	lcd->initialised = 1;
+	return 0;
+}
+
+static inline int ili9320_power_on(struct ili9320 *lcd)
+{
+	if (!lcd->initialised)
+		ili9320_init_chip(lcd);
+
+	lcd->display1 |= (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE);
+	ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
+
+	return 0;
+}
+
+static inline int ili9320_power_off(struct ili9320 *lcd)
+{
+	lcd->display1 &= ~(ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE);
+	ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
+
+	return 0;
+}
+
+#define POWER_IS_ON(pwr)	((pwr) <= LCD_POWER_REDUCED)
+
+static int ili9320_power(struct ili9320 *lcd, int power)
+{
+	int ret = 0;
+
+	dev_dbg(lcd->dev, "power %d => %d\n", lcd->power, power);
+
+	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+		ret = ili9320_power_on(lcd);
+	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+		ret = ili9320_power_off(lcd);
+
+	if (ret == 0)
+		lcd->power = power;
+	else
+		dev_warn(lcd->dev, "failed to set power mode %d\n", power);
+
+	return ret;
+}
+
+static inline struct ili9320 *to_our_lcd(struct lcd_device *lcd)
+{
+	return lcd_get_data(lcd);
+}
+
+static int ili9320_set_power(struct lcd_device *ld, int power)
+{
+	struct ili9320 *lcd = to_our_lcd(ld);
+
+	return ili9320_power(lcd, power);
+}
+
+static int ili9320_get_power(struct lcd_device *ld)
+{
+	struct ili9320 *lcd = to_our_lcd(ld);
+
+	return lcd->power;
+}
+
+static const struct lcd_ops ili9320_ops = {
+	.get_power	= ili9320_get_power,
+	.set_power	= ili9320_set_power,
+};
+
+static void ili9320_setup_spi(struct ili9320 *ili,
+					struct spi_device *dev)
+{
+	struct ili9320_spi *spi = &ili->access.spi;
+
+	ili->write = ili9320_write_spi;
+	spi->dev = dev;
+
+	/* fill the two messages we are going to use to send the data
+	 * with, the first the address followed by the data. The datasheet
+	 * says they should be done as two distinct cycles of the SPI CS line.
+	 */
+
+	spi->xfer[0].tx_buf = spi->buffer_addr;
+	spi->xfer[1].tx_buf = spi->buffer_data;
+	spi->xfer[0].len = 3;
+	spi->xfer[1].len = 3;
+	spi->xfer[0].bits_per_word = 8;
+	spi->xfer[1].bits_per_word = 8;
+	spi->xfer[0].cs_change = 1;
+
+	spi_message_init(&spi->message);
+	spi_message_add_tail(&spi->xfer[0], &spi->message);
+	spi_message_add_tail(&spi->xfer[1], &spi->message);
+}
+
+int ili9320_probe_spi(struct spi_device *spi,
+				struct ili9320_client *client)
+{
+	struct ili9320_platdata *cfg = dev_get_platdata(&spi->dev);
+	struct device *dev = &spi->dev;
+	struct ili9320 *ili;
+	struct lcd_device *lcd;
+	int ret = 0;
+
+	/* verify we where given some information */
+
+	if (cfg == NULL) {
+		dev_err(dev, "no platform data supplied\n");
+		return -EINVAL;
+	}
+
+	if (cfg->hsize <= 0 || cfg->vsize <= 0 || cfg->reset == NULL) {
+		dev_err(dev, "invalid platform data supplied\n");
+		return -EINVAL;
+	}
+
+	/* allocate and initialse our state */
+
+	ili = devm_kzalloc(&spi->dev, sizeof(struct ili9320), GFP_KERNEL);
+	if (ili == NULL)
+		return -ENOMEM;
+
+	ili->access.spi.id = ILI9320_SPI_IDCODE | ILI9320_SPI_ID(1);
+
+	ili->dev = dev;
+	ili->client = client;
+	ili->power = LCD_POWER_OFF;
+	ili->platdata = cfg;
+
+	spi_set_drvdata(spi, ili);
+
+	ili9320_setup_spi(ili, spi);
+
+	lcd = devm_lcd_device_register(&spi->dev, "ili9320", dev, ili,
+					&ili9320_ops);
+	if (IS_ERR(lcd)) {
+		dev_err(dev, "failed to register lcd device\n");
+		return PTR_ERR(lcd);
+	}
+
+	ili->lcd = lcd;
+
+	dev_info(dev, "initialising %s\n", client->name);
+
+	ret = ili9320_power(ili, LCD_POWER_ON);
+	if (ret != 0) {
+		dev_err(dev, "failed to set lcd power state\n");
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ili9320_probe_spi);
+
+void ili9320_remove(struct ili9320 *ili)
+{
+	ili9320_power(ili, LCD_POWER_OFF);
+}
+EXPORT_SYMBOL_GPL(ili9320_remove);
+
+#ifdef CONFIG_PM_SLEEP
+int ili9320_suspend(struct ili9320 *lcd)
+{
+	int ret;
+
+	ret = ili9320_power(lcd, LCD_POWER_OFF);
+
+	if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) {
+		ili9320_write(lcd, ILI9320_POWER1, lcd->power1 |
+			      ILI9320_POWER1_SLP |
+			      ILI9320_POWER1_DSTB);
+		lcd->initialised = 0;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ili9320_suspend);
+
+int ili9320_resume(struct ili9320 *lcd)
+{
+	dev_info(lcd->dev, "resuming from power state %d\n", lcd->power);
+
+	if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP)
+		ili9320_write(lcd, ILI9320_POWER1, 0x00);
+
+	return ili9320_power(lcd, LCD_POWER_ON);
+}
+EXPORT_SYMBOL_GPL(ili9320_resume);
+#endif
+
+/* Power down all displays on reboot, poweroff or halt */
+void ili9320_shutdown(struct ili9320 *lcd)
+{
+	ili9320_power(lcd, LCD_POWER_OFF);
+}
+EXPORT_SYMBOL_GPL(ili9320_shutdown);
+
+MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
+MODULE_DESCRIPTION("ILI9320 LCD Driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.3.1