From 33a154a96e71a34a1bcca9f40da343dbbf7b38b4 Mon Sep 17 00:00:00 2001
From: Alexei Starovoitov <ast@kernel.org>
Date: Thu, 1 Oct 2026 14:52:55 +0000
Subject: selftests/bpf: Test packet range of pointers sharing an id

Add tests where two packet pointers share an id and tightening one
pointer's umax from its var_off would put it less than their constant
distance from the other's umax: with an index & 0x38 capped at 50, the
base pointer keeps umax 50, so the pointer 8 bytes further on must keep
umax 58, even though its known bits allow at most 56.

These refused a valid program or accepted an out-of-bounds access before
the fix:

- check the advanced copy, load through the base: valid, was refused;
- check the base, load the byte at base + 1 through a copy advanced by
  8: was accepted;
- check base + 4, load 4 bytes at base + 2 through base + 8: reads two
  bytes past the checked range, was accepted;
- the same as the second with data_meta pointers checked against data:
  was accepted.

These pass with and without the fix and cover nearby paths:

- subtract an unknown scalar from a checked pointer and load below it
  (the range is kept across a new id);
- reach a load through two paths whose checks cover 8 and 7 bytes after
  the loaded pointer; the second path must not be pruned by the first;
- spill a copy of a pointer, check the pointer, fill the copy and load
  one byte past the checked range: the load is refused, and the copy
  has the range of the check.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20261001145255.855630-2-alexei.starovoitov@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
---
 drivers/usb/serial/Makefile | 65 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 drivers/usb/serial/Makefile

(limited to 'drivers/usb/serial/Makefile')

diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
new file mode 100644
index 000000000..c7bb1a881
--- /dev/null
+++ b/drivers/usb/serial/Makefile
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the USB serial device drivers.
+#
+
+# Object file lists.
+
+obj-$(CONFIG_USB_SERIAL)			+= usbserial.o
+
+usbserial-y := usb-serial.o generic.o bus.o
+
+usbserial-$(CONFIG_USB_SERIAL_CONSOLE)	+= console.o
+
+obj-$(CONFIG_USB_SERIAL_AIRCABLE)		+= aircable.o
+obj-$(CONFIG_USB_SERIAL_ARK3116)		+= ark3116.o
+obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
+obj-$(CONFIG_USB_SERIAL_CH341)			+= ch341.o
+obj-$(CONFIG_USB_SERIAL_CP210X)			+= cp210x.o
+obj-$(CONFIG_USB_SERIAL_CYBERJACK)		+= cyberjack.o
+obj-$(CONFIG_USB_SERIAL_CYPRESS_M8)		+= cypress_m8.o
+obj-$(CONFIG_USB_SERIAL_DEBUG)			+= usb_debug.o
+obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT)	+= digi_acceleport.o
+obj-$(CONFIG_USB_SERIAL_EDGEPORT)		+= io_edgeport.o
+obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI)		+= io_ti.o
+obj-$(CONFIG_USB_SERIAL_EMPEG)			+= empeg.o
+obj-$(CONFIG_USB_SERIAL_F81232)			+= f81232.o
+obj-$(CONFIG_USB_SERIAL_F8153X)			+= f81534.o
+obj-$(CONFIG_USB_SERIAL_FTDI_SIO)		+= ftdi_sio.o
+obj-$(CONFIG_USB_SERIAL_GARMIN)			+= garmin_gps.o
+obj-$(CONFIG_USB_SERIAL_IPAQ)			+= ipaq.o
+obj-$(CONFIG_USB_SERIAL_IPW)			+= ipw.o
+obj-$(CONFIG_USB_SERIAL_IR)			+= ir-usb.o
+obj-$(CONFIG_USB_SERIAL_IUU)			+= iuu_phoenix.o
+obj-$(CONFIG_USB_SERIAL_KEYSPAN)		+= keyspan.o
+obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA)		+= keyspan_pda.o
+obj-$(CONFIG_USB_SERIAL_KLSI)			+= kl5kusb105.o
+obj-$(CONFIG_USB_SERIAL_KOBIL_SCT)		+= kobil_sct.o
+obj-$(CONFIG_USB_SERIAL_MCT_U232)		+= mct_u232.o
+obj-$(CONFIG_USB_SERIAL_METRO)			+= metro-usb.o
+obj-$(CONFIG_USB_SERIAL_MOS7720)		+= mos7720.o
+obj-$(CONFIG_USB_SERIAL_MOS7840)		+= mos7840.o
+obj-$(CONFIG_USB_SERIAL_MXUPORT)		+= mxuport.o
+obj-$(CONFIG_USB_SERIAL_NAVMAN)			+= navman.o
+obj-$(CONFIG_USB_SERIAL_OMNINET)		+= omninet.o
+obj-$(CONFIG_USB_SERIAL_OPTICON)		+= opticon.o
+obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
+obj-$(CONFIG_USB_SERIAL_OTI6858)		+= oti6858.o
+obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
+obj-$(CONFIG_USB_SERIAL_QCAUX)			+= qcaux.o
+obj-$(CONFIG_USB_SERIAL_QUALCOMM)		+= qcserial.o
+obj-$(CONFIG_USB_SERIAL_QT2)			+= quatech2.o
+obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
+obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
+obj-$(CONFIG_USB_SERIAL_SIMPLE)			+= usb-serial-simple.o
+obj-$(CONFIG_USB_SERIAL_SPCP8X5)		+= spcp8x5.o
+obj-$(CONFIG_USB_SERIAL_SSU100)			+= ssu100.o
+obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
+obj-$(CONFIG_USB_SERIAL_WWAN)			+= usb_wwan.o
+obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
+obj-$(CONFIG_USB_SERIAL_UPD78F0730)		+= upd78f0730.o
+obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
+obj-$(CONFIG_USB_SERIAL_WISHBONE)		+= wishbone-serial.o
+obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
+obj-$(CONFIG_USB_SERIAL_XR)			+= xr_serial.o
+obj-$(CONFIG_USB_SERIAL_XSENS_MT)		+= xsens_mt.o
-- 
cgit v1.3.1