From 2bc6b218717b9d08f466f88209251d54bc09b207 Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Tue, 22 Sep 2026 19:14:30 +0100 Subject: arm64/boot: Disable trapping of PMZR_EL0 writes to EL2 __init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2. PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a write from EL0 reaches the trap and takes the host down without a panic message. Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9 bits. Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9") Cc: stable@vger.kernel.org Signed-off-by: Fuad Tabba Reviewed-by: Anshuman Khandual Reviewed-by: Oliver Upton Signed-off-by: Will Deacon --- drivers/usb/Kconfig | 162 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 162 insertions(+) create mode 100644 drivers/usb/Kconfig (limited to 'drivers/usb/Kconfig') diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig new file mode 100644 index 000000000..abf8c6cde --- /dev/null +++ b/drivers/usb/Kconfig @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# USB device configuration +# + +config USB_OHCI_BIG_ENDIAN_DESC + bool + +config USB_OHCI_BIG_ENDIAN_MMIO + bool + +config USB_OHCI_LITTLE_ENDIAN + bool + default n if PPC_MPC52xx + default y + +config USB_EHCI_BIG_ENDIAN_MMIO + bool + +config USB_EHCI_BIG_ENDIAN_DESC + bool + +config USB_UHCI_BIG_ENDIAN_MMIO + bool + +config USB_UHCI_BIG_ENDIAN_DESC + bool + +menuconfig USB_SUPPORT + bool "USB support" + depends on HAS_IOMEM + default y + help + This option adds core support for Universal Serial Bus (USB). + You will also need drivers from the following menu to make use of it. + +if USB_SUPPORT + +source "drivers/usb/common/Kconfig" + +config USB_ARCH_HAS_HCD + def_bool y + +config USB + tristate "Support for Host-side USB" + depends on USB_ARCH_HAS_HCD + select GENERIC_ALLOCATOR + select USB_COMMON + select NLS # for UTF-8 strings + help + Universal Serial Bus (USB) is a specification for a serial bus + subsystem which offers higher speeds and more features than the + traditional PC serial port. The bus supplies power to peripherals + and allows for hot swapping. Up to 127 USB peripherals can be + connected to a single USB host in a tree structure. + + The USB host is the root of the tree, the peripherals are the + leaves and the inner nodes are special USB devices called hubs. + Most PCs now have USB host ports, used to connect peripherals + such as scanners, keyboards, mice, modems, cameras, disks, + flash memory, network links, and printers to the PC. + + Say Y here if your computer has a host-side USB port and you want + to use USB devices. You then need to say Y to at least one of the + Host Controller Driver (HCD) options below. Choose a USB 1.1 + controller, such as "UHCI HCD support" or "OHCI HCD support", + and "EHCI HCD (USB 2.0) support" except for older systems that + do not have USB 2.0 support. It doesn't normally hurt to select + them all if you are not certain. + + If your system has a device-side USB port, used in the peripheral + side of the USB protocol, see the "USB Gadget" framework instead. + + After choosing your HCD, then select drivers for the USB peripherals + you'll be using. You may want to check out the information provided + in and especially the links given in + . + + To compile this driver as a module, choose M here: the + module will be called usbcore. + +config USB_PCI + bool "PCI based USB host interface" + depends on PCI + default y + help + Many embedded system SOCs (e.g. freescale T2080) have both + PCI and USB modules with the USB module directly controlled by + registers and having no relationship to the PCI module. + + If you have such a device you may say N here and PCI related code + will not be built in the USB driver. + +config USB_PCI_AMD + bool "AMD PCI USB host support" + depends on USB_PCI && HAS_IOPORT + default X86 || MACH_LOONGSON64 || PPC_PASEMI + help + Enable workarounds for USB implementation quirks in SB600/SB700/SB800 + and later south bridge implementations. These are common on x86 PCs + with AMD CPUs but rarely used elsewhere, with the exception of a few + powerpc and mips desktop machines. + +if USB + +source "drivers/usb/core/Kconfig" + +source "drivers/usb/mon/Kconfig" + +source "drivers/usb/host/Kconfig" + +source "drivers/usb/renesas_usbhs/Kconfig" + +source "drivers/usb/class/Kconfig" + +source "drivers/usb/storage/Kconfig" + +source "drivers/usb/image/Kconfig" + +source "drivers/usb/usbip/Kconfig" + +endif + +comment "USB dual-mode controller drivers" + +source "drivers/usb/cdns3/Kconfig" + +source "drivers/usb/fotg210/Kconfig" + +source "drivers/usb/mtu3/Kconfig" + +source "drivers/usb/musb/Kconfig" + +source "drivers/usb/dwc3/Kconfig" + +source "drivers/usb/dwc2/Kconfig" + +source "drivers/usb/chipidea/Kconfig" + +source "drivers/usb/isp1760/Kconfig" + +comment "USB port drivers" + +if USB + +source "drivers/usb/serial/Kconfig" + +source "drivers/usb/misc/Kconfig" + +source "drivers/usb/atm/Kconfig" + +endif # USB + +source "drivers/usb/phy/Kconfig" + +source "drivers/usb/gadget/Kconfig" + +source "drivers/usb/typec/Kconfig" + +source "drivers/usb/roles/Kconfig" + +endif # USB_SUPPORT -- cgit v1.3.1