From 3a2c4d55e32ad65efebdb6de44eef3bfa08bb49d Mon Sep 17 00:00:00 2001
From: Kees Cook <kees+treewide@kernel.org>
Date: Wed, 2 Sep 2026 15:31:14 -0700
Subject: treewide: refresh kmalloc_obj() conversions

This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci

This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.

Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.

Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
---
 drivers/soc/ti/Kconfig | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)
 create mode 100644 drivers/soc/ti/Kconfig

(limited to 'drivers/soc/ti/Kconfig')

diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
new file mode 100644
index 000000000..163aadd58
--- /dev/null
+++ b/drivers/soc/ti/Kconfig
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+#
+# TI SOC drivers
+#
+menuconfig SOC_TI
+	bool "TI SOC drivers support"
+
+if SOC_TI
+
+config KEYSTONE_NAVIGATOR_QMSS
+	tristate "Keystone Queue Manager Sub System"
+	depends on ARCH_KEYSTONE
+	help
+	  Say y here to support the Keystone multicore Navigator Queue
+	  Manager support. The Queue Manager is a hardware module that
+	  is responsible for accelerating management of the packet queues.
+	  Packets are queued/de-queued by writing/reading descriptor address
+	  to a particular memory mapped location in the Queue Manager module.
+
+	  If unsure, say N.
+
+config KEYSTONE_NAVIGATOR_DMA
+	tristate "TI Keystone Navigator Packet DMA support"
+	depends on ARCH_KEYSTONE
+	help
+	  Say y tp enable support for the Keystone Navigator Packet DMA on
+	  on Keystone family of devices. It sets up the dma channels for the
+	  Queue Manager Sub System.
+
+	  If unsure, say N.
+
+config AMX3_PM
+	tristate "AMx3 Power Management"
+	depends on SOC_AM33XX || SOC_AM43XX
+	depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM && RTC_DRV_OMAP
+	help
+	  Enable power management on AM335x and AM437x. Required for suspend to mem
+	  and standby states on both AM335x and AM437x platforms and for deeper cpuidle
+	  c-states on AM335x. Also required for rtc and ddr in self-refresh low
+	  power mode on AM437x platforms.
+
+config WKUP_M3_IPC
+	tristate "TI AMx3 Wkup-M3 IPC Driver"
+	depends on WKUP_M3_RPROC
+	depends on OMAP2PLUS_MBOX
+	help
+	  TI AM33XX and AM43XX have a Cortex M3, the Wakeup M3, to handle
+	  low power transitions. This IPC driver provides the necessary API
+	  to communicate and use the Wakeup M3 for PM features like suspend
+	  resume and boots it using wkup_m3_rproc driver.
+
+config TI_K3_RINGACC
+	tristate "K3 Ring accelerator Sub System"
+	depends on ARCH_K3 || COMPILE_TEST
+	depends on TI_SCI_INTA_IRQCHIP
+	help
+	  Say y here to support the K3 Ring accelerator module.
+	  The Ring Accelerator (RINGACC or RA)  provides hardware acceleration
+	  to enable straightforward passing of work between a producer
+	  and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs
+	  If unsure, say N.
+
+config TI_K3_SOCINFO
+	bool "K3 SoC Information driver" if COMPILE_TEST
+	depends on ARCH_K3 || COMPILE_TEST
+	select SOC_BUS
+	select MFD_SYSCON
+	help
+	  Include support for the SoC bus socinfo for the TI K3 Multicore SoC
+	  platforms to provide information about the SoC family and
+	  variant to user space.
+
+config TI_PRUSS
+	tristate "TI PRU-ICSS Subsystem Platform drivers"
+	depends on SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  TI PRU-ICSS Subsystem platform specific support.
+
+	  Say Y or M here to support the Programmable Realtime Unit (PRU)
+	  processors on various TI SoCs. It's safe to say N here if you're
+	  not interested in the PRU or if you are unsure.
+
+endif # SOC_TI
+
+config TI_SCI_INTA_MSI_DOMAIN
+	bool
+	select GENERIC_MSI_IRQ
+	help
+	  Driver to enable Interrupt Aggregator specific MSI Domain.
-- 
cgit v1.3.1