From 4352b8aee98005853aa63f57d6377282de17a33f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 23 Aug 2026 13:28:57 -0700 Subject: Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull I3C updates from Alexandre Belloni: "A new driver this cycle, for the AMD AXI I3C controller. There are also new features such as IBI wakeup support, SETAASA device discovery and ACPI support for the the DAA methods, meaning we can now communicate with the SPD devices on DDR5 modules. New driver: - AMD AXI I3C master controller Subsystem: - I3C Common Command Code (CCC) handling improvements, especially around GET CCCs - SETAASA device discovery support - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as well as I2C devices on I3C bus - IBI-based wakeup support Drivers: - dw: SETAASA support - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C controller support, PIO queue management support for HCI v1.2 - renesas: improve suspend to RAM support, add runtime PM support" * tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits) i3c: dw: reduce do_daa time if there's no client i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2 i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode i3c: dw: rename "pclk" to "apb" to match dt-binding i3c: dw: make struct dw_i3c_cmd smaller i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding i3c: renesas: Don't register devices when ENTDAA times out i3c: master: dw-i3c-master: fix OD timing for first broadcast i3c: mipi-i3c-hci: Advertise IBI wakeup capability i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev() i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI i3c: master: Reject IBI requests from non-IBI-capable devices i3c: master: Add helper to query bus wakeup requirements i3c: master: Report wakeup events for IBIs i3c: master: Support IBI-based wakeup capability i3c: master: Fix potential UAF in i3c_device_match() i3c: master: Fix potential UAF in i3c_device_uevent() i3c: Make dev->desc locking assumptions explicit i3c: master: Fix use-after-free of master->this ... --- drivers/rtc/rtc-rx8111.c | 368 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 368 insertions(+) create mode 100644 drivers/rtc/rtc-rx8111.c (limited to 'drivers/rtc/rtc-rx8111.c') diff --git a/drivers/rtc/rtc-rx8111.c b/drivers/rtc/rtc-rx8111.c new file mode 100644 index 000000000..8450d9f0b --- /dev/null +++ b/drivers/rtc/rtc-rx8111.c @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for Epson RX8111 RTC. + * + * Copyright (C) 2023 Axis Communications AB + */ + +#include +#include +#include +#include +#include + +#include + +#define RX8111_REG_SEC 0x10 /* Second counter. */ +#define RX8111_REG_MIN 0x11 /* Minute counter */ +#define RX8111_REG_HOUR 0x12 /* Hour counter. */ +#define RX8111_REG_WEEK 0x13 /* Week day counter. */ +#define RX8111_REG_DAY 0x14 /* Month day counter. */ +#define RX8111_REG_MONTH 0x15 /* Month counter. */ +#define RX8111_REG_YEAR 0x16 /* Year counter. */ + +#define RX8111_REG_ALARM_MIN 0x17 /* Alarm minute. */ +#define RX8111_REG_ALARM_HOUR 0x18 /* Alarm hour. */ +#define RX8111_REG_ALARM_WEEK_DAY 0x19 /* Alarm week or month day. */ + +#define RX8111_REG_TIMER_COUNTER0 0x1a /* Timer counter LSB. */ +#define RX8111_REG_TIMER_COUNTER1 0x1b /* Timer counter. */ +#define RX8111_REG_TIMER_COUNTER2 0x1c /* Timer counter MSB. */ + +#define RX8111_REG_EXT 0x1d /* Extension register. */ +#define RX8111_REG_FLAG 0x1e /* Flag register. */ +#define RX8111_REG_CTRL 0x1f /* Control register. */ + +#define RX8111_REG_TS_1_1000_SEC 0x20 /* Timestamp 256 or 512 Hz . */ +#define RX8111_REG_TS_1_100_SEC 0x21 /* Timestamp 1 - 128 Hz. */ +#define RX8111_REG_TS_SEC 0x22 /* Timestamp second. */ +#define RX8111_REG_TS_MIN 0x23 /* Timestamp minute. */ +#define RX8111_REG_TS_HOUR 0x24 /* Timestamp hour. */ +#define RX8111_REG_TS_WEEK 0x25 /* Timestamp week day. */ +#define RX8111_REG_TS_DAY 0x26 /* Timestamp month day. */ +#define RX8111_REG_TS_MONTH 0x27 /* Timestamp month. */ +#define RX8111_REG_TS_YEAR 0x28 /* Timestamp year. */ +#define RX8111_REG_TS_STATUS 0x29 /* Timestamp status. */ + +#define RX8111_REG_EVIN_SETTING 0x2b /* Timestamp trigger setting. */ +#define RX8111_REG_ALARM_SEC 0x2c /* Alarm second. */ +#define RX8111_REG_TIMER_CTRL 0x2d /* Timer control. */ +#define RX8111_REG_TS_CTRL0 0x2e /* Timestamp control 0. */ +#define RX8111_REG_CMD_TRIGGER 0x2f /* Timestamp trigger. */ +#define RX8111_REG_PWR_SWITCH_CTRL 0x32 /* Power switch control. */ +#define RX8111_REG_STATUS_MON 0x33 /* Status monitor. */ +#define RX8111_REG_TS_CTRL1 0x34 /* Timestamp control 1. */ +#define RX8111_REG_TS_CTRL2 0x35 /* Timestamp control 2. */ +#define RX8111_REG_TS_CTRL3 0x36 /* Timestamp control 3. */ + +#define RX8111_FLAG_XST_BIT BIT(0) +#define RX8111_FLAG_VLF_BIT BIT(1) + +#define RX8111_TIME_BUF_SZ (RX8111_REG_YEAR - RX8111_REG_SEC + 1) + +enum rx8111_regfield { + /* RX8111_REG_EXT. */ + RX8111_REGF_TSEL0, + RX8111_REGF_TSEL1, + RX8111_REGF_ETS, + RX8111_REGF_WADA, + RX8111_REGF_TE, + RX8111_REGF_USEL, + RX8111_REGF_FSEL0, + RX8111_REGF_FSEL1, + + /* RX8111_REG_FLAG. */ + RX8111_REGF_XST, + RX8111_REGF_VLF, + RX8111_REGF_EVF, + RX8111_REGF_AF, + RX8111_REGF_TF, + RX8111_REGF_UF, + RX8111_REGF_POR, + + /* RX8111_REG_CTRL. */ + RX8111_REGF_STOP, + RX8111_REGF_EIE, + RX8111_REGF_AIE, + RX8111_REGF_TIE, + RX8111_REGF_UIE, + + /* RX8111_REG_PWR_SWITCH_CTRL. */ + RX8111_REGF_SMPT0, + RX8111_REGF_SMPT1, + RX8111_REGF_SWSEL0, + RX8111_REGF_SWSEL1, + RX8111_REGF_INIEN, + RX8111_REGF_CHGEN, + + /* RX8111_REG_STATUS_MON. */ + RX8111_REGF_VLOW, + + /* Sentinel value. */ + RX8111_REGF_MAX +}; + +static const struct reg_field rx8111_regfields[] = { + [RX8111_REGF_TSEL0] = REG_FIELD(RX8111_REG_EXT, 0, 0), + [RX8111_REGF_TSEL1] = REG_FIELD(RX8111_REG_EXT, 1, 1), + [RX8111_REGF_ETS] = REG_FIELD(RX8111_REG_EXT, 2, 2), + [RX8111_REGF_WADA] = REG_FIELD(RX8111_REG_EXT, 3, 3), + [RX8111_REGF_TE] = REG_FIELD(RX8111_REG_EXT, 4, 4), + [RX8111_REGF_USEL] = REG_FIELD(RX8111_REG_EXT, 5, 5), + [RX8111_REGF_FSEL0] = REG_FIELD(RX8111_REG_EXT, 6, 6), + [RX8111_REGF_FSEL1] = REG_FIELD(RX8111_REG_EXT, 7, 7), + + [RX8111_REGF_XST] = REG_FIELD(RX8111_REG_FLAG, 0, 0), + [RX8111_REGF_VLF] = REG_FIELD(RX8111_REG_FLAG, 1, 1), + [RX8111_REGF_EVF] = REG_FIELD(RX8111_REG_FLAG, 2, 2), + [RX8111_REGF_AF] = REG_FIELD(RX8111_REG_FLAG, 3, 3), + [RX8111_REGF_TF] = REG_FIELD(RX8111_REG_FLAG, 4, 4), + [RX8111_REGF_UF] = REG_FIELD(RX8111_REG_FLAG, 5, 5), + [RX8111_REGF_POR] = REG_FIELD(RX8111_REG_FLAG, 7, 7), + + [RX8111_REGF_STOP] = REG_FIELD(RX8111_REG_CTRL, 0, 0), + [RX8111_REGF_EIE] = REG_FIELD(RX8111_REG_CTRL, 2, 2), + [RX8111_REGF_AIE] = REG_FIELD(RX8111_REG_CTRL, 3, 3), + [RX8111_REGF_TIE] = REG_FIELD(RX8111_REG_CTRL, 4, 4), + [RX8111_REGF_UIE] = REG_FIELD(RX8111_REG_CTRL, 5, 5), + + [RX8111_REGF_SMPT0] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 0, 0), + [RX8111_REGF_SMPT1] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 1, 1), + [RX8111_REGF_SWSEL0] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 2, 2), + [RX8111_REGF_SWSEL1] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 3, 3), + [RX8111_REGF_INIEN] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 6, 6), + [RX8111_REGF_CHGEN] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 7, 7), + + [RX8111_REGF_VLOW] = REG_FIELD(RX8111_REG_STATUS_MON, 1, 1), +}; + +static const struct regmap_config rx8111_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = RX8111_REG_TS_CTRL3, +}; + +struct rx8111_data { + struct regmap *regmap; + struct regmap_field *regfields[RX8111_REGF_MAX]; + struct device *dev; + struct rtc_device *rtc; +}; + +static int rx8111_read_vl_flag(struct rx8111_data *data, unsigned int *vlval) +{ + int ret; + + ret = regmap_field_read(data->regfields[RX8111_REGF_VLF], vlval); + if (ret) + dev_dbg(data->dev, "Could not read VL flag (%d)", ret); + + return ret; +} + +static int rx8111_read_time(struct device *dev, struct rtc_time *tm) +{ + struct rx8111_data *data = dev_get_drvdata(dev); + u8 buf[RX8111_TIME_BUF_SZ]; + unsigned int regval; + int ret; + + /* Check status. */ + ret = regmap_read(data->regmap, RX8111_REG_FLAG, ®val); + if (ret) { + dev_dbg(data->dev, "Could not read flag register (%d)\n", ret); + return ret; + } + + if (FIELD_GET(RX8111_FLAG_XST_BIT, regval)) { + dev_dbg(data->dev, + "Crystal oscillation stopped, time is not reliable\n"); + return -EINVAL; + } + + if (FIELD_GET(RX8111_FLAG_VLF_BIT, regval)) { + dev_dbg(data->dev, + "Low voltage detected, time is not reliable\n"); + return -EINVAL; + } + + ret = regmap_field_read(data->regfields[RX8111_REGF_STOP], ®val); + if (ret) { + dev_dbg(data->dev, "Could not read clock status (%d)\n", ret); + return ret; + } + + if (regval) { + dev_dbg(data->dev, "Clock stopped, time is not reliable\n"); + return -EINVAL; + } + + /* Read time. */ + ret = regmap_bulk_read(data->regmap, RX8111_REG_SEC, buf, + ARRAY_SIZE(buf)); + if (ret) { + dev_dbg(data->dev, "Could not bulk read time (%d)\n", ret); + return ret; + } + + tm->tm_sec = bcd2bin(buf[0]); + tm->tm_min = bcd2bin(buf[1]); + tm->tm_hour = bcd2bin(buf[2]); + tm->tm_wday = ffs(buf[3]) - 1; + tm->tm_mday = bcd2bin(buf[4]); + tm->tm_mon = bcd2bin(buf[5]) - 1; + tm->tm_year = bcd2bin(buf[6]) + 100; + + return 0; +} + +static int rx8111_set_time(struct device *dev, struct rtc_time *tm) +{ + struct rx8111_data *data = dev_get_drvdata(dev); + u8 buf[RX8111_TIME_BUF_SZ]; + int ret; + + buf[0] = bin2bcd(tm->tm_sec); + buf[1] = bin2bcd(tm->tm_min); + buf[2] = bin2bcd(tm->tm_hour); + buf[3] = BIT(tm->tm_wday); + buf[4] = bin2bcd(tm->tm_mday); + buf[5] = bin2bcd(tm->tm_mon + 1); + buf[6] = bin2bcd(tm->tm_year - 100); + + ret = regmap_clear_bits(data->regmap, RX8111_REG_FLAG, + RX8111_FLAG_XST_BIT | RX8111_FLAG_VLF_BIT); + if (ret) + return ret; + + /* Stop the clock. */ + ret = regmap_field_write(data->regfields[RX8111_REGF_STOP], 1); + if (ret) { + dev_dbg(data->dev, "Could not stop the clock (%d)\n", ret); + return ret; + } + + /* Set the time. */ + ret = regmap_bulk_write(data->regmap, RX8111_REG_SEC, buf, + ARRAY_SIZE(buf)); + if (ret) { + dev_dbg(data->dev, "Could not bulk write time (%d)\n", ret); + + /* + * We don't bother with trying to start the clock again. We + * check for this in rx8111_read_time() (and thus force user to + * call rx8111_set_time() to try again). + */ + return ret; + } + + /* Start the clock. */ + ret = regmap_field_write(data->regfields[RX8111_REGF_STOP], 0); + if (ret) { + dev_dbg(data->dev, "Could not start the clock (%d)\n", ret); + return ret; + } + + return 0; +} + +static int rx8111_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + struct rx8111_data *data = dev_get_drvdata(dev); + unsigned int regval; + unsigned int vlval; + int ret; + + switch (cmd) { + case RTC_VL_READ: + ret = rx8111_read_vl_flag(data, ®val); + if (ret) + return ret; + + vlval = regval ? RTC_VL_DATA_INVALID : 0; + + ret = regmap_field_read(data->regfields[RX8111_REGF_VLOW], + ®val); + if (ret) + return ret; + + vlval |= regval ? RTC_VL_BACKUP_LOW : 0; + + return put_user(vlval, (typeof(vlval) __user *)arg); + default: + return -ENOIOCTLCMD; + } +} + +static const struct rtc_class_ops rx8111_rtc_ops = { + .read_time = rx8111_read_time, + .set_time = rx8111_set_time, + .ioctl = rx8111_ioctl, +}; + +static int rx8111_probe(struct i2c_client *client) +{ + struct rx8111_data *data; + struct rtc_device *rtc; + size_t i; + + data = devm_kmalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_dbg(&client->dev, "Could not allocate device data\n"); + return -ENOMEM; + } + + data->dev = &client->dev; + dev_set_drvdata(data->dev, data); + + data->regmap = devm_regmap_init_i2c(client, &rx8111_regmap_config); + if (IS_ERR(data->regmap)) { + dev_dbg(data->dev, "Could not initialize regmap\n"); + return PTR_ERR(data->regmap); + } + + for (i = 0; i < RX8111_REGF_MAX; ++i) { + data->regfields[i] = devm_regmap_field_alloc( + data->dev, data->regmap, rx8111_regfields[i]); + if (IS_ERR(data->regfields[i])) { + dev_dbg(data->dev, + "Could not allocate register field %zu\n", i); + return PTR_ERR(data->regfields[i]); + } + } + + rtc = devm_rtc_allocate_device(data->dev); + if (IS_ERR(rtc)) { + dev_dbg(data->dev, "Could not allocate rtc device\n"); + return PTR_ERR(rtc); + } + + rtc->ops = &rx8111_rtc_ops; + rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; + rtc->range_max = RTC_TIMESTAMP_END_2099; + + clear_bit(RTC_FEATURE_ALARM, rtc->features); + + return devm_rtc_register_device(rtc); +} + +static const struct of_device_id rx8111_of_match[] = { + { + .compatible = "epson,rx8111", + }, + {} +}; +MODULE_DEVICE_TABLE(of, rx8111_of_match); + +static struct i2c_driver rx8111_driver = { + .driver = { + .name = "rtc-rx8111", + .of_match_table = rx8111_of_match, + }, + .probe = rx8111_probe, +}; +module_i2c_driver(rx8111_driver); + +MODULE_AUTHOR("Waqar Hameed "); +MODULE_DESCRIPTION("Epson RX8111 RTC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.3.1