From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- drivers/rtc/rtc-opal.c | 301 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 301 insertions(+) create mode 100644 drivers/rtc/rtc-opal.c (limited to 'drivers/rtc/rtc-opal.c') diff --git a/drivers/rtc/rtc-opal.c b/drivers/rtc/rtc-opal.c new file mode 100644 index 000000000..ad41aaf8a --- /dev/null +++ b/drivers/rtc/rtc-opal.c @@ -0,0 +1,301 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * IBM OPAL RTC driver + * Copyright (C) 2014 IBM + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRVNAME "rtc-opal" + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm) +{ + tm->tm_year = ((bcd2bin(y_m_d >> 24) * 100) + + bcd2bin((y_m_d >> 16) & 0xff)) - 1900; + tm->tm_mon = bcd2bin((y_m_d >> 8) & 0xff) - 1; + tm->tm_mday = bcd2bin(y_m_d & 0xff); + tm->tm_hour = bcd2bin((h_m_s_ms >> 56) & 0xff); + tm->tm_min = bcd2bin((h_m_s_ms >> 48) & 0xff); + tm->tm_sec = bcd2bin((h_m_s_ms >> 40) & 0xff); + + tm->tm_wday = -1; +} + +static void tm_to_opal(struct rtc_time *tm, u32 *y_m_d, u64 *h_m_s_ms) +{ + *y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) / 100)) << 24; + *y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) % 100)) << 16; + *y_m_d |= ((u32)bin2bcd((tm->tm_mon + 1))) << 8; + *y_m_d |= ((u32)bin2bcd(tm->tm_mday)); + + *h_m_s_ms |= ((u64)bin2bcd(tm->tm_hour)) << 56; + *h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48; + *h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40; +} + +static int opal_get_rtc_time(struct device *dev, struct rtc_time *tm) +{ + s64 rc = OPAL_BUSY; + int retries = 10; + u32 y_m_d; + u64 h_m_s_ms; + __be32 __y_m_d; + __be64 __h_m_s_ms; + + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms); + if (rc == OPAL_BUSY_EVENT) { + msleep(OPAL_BUSY_DELAY_MS); + opal_poll_events(NULL); + } else if (rc == OPAL_BUSY) { + msleep(OPAL_BUSY_DELAY_MS); + } else if (rc == OPAL_HARDWARE || rc == OPAL_INTERNAL_ERROR) { + if (retries--) { + msleep(10); /* Wait 10ms before retry */ + rc = OPAL_BUSY; /* go around again */ + } + } + } + + if (rc != OPAL_SUCCESS) + return -EIO; + + y_m_d = be32_to_cpu(__y_m_d); + h_m_s_ms = be64_to_cpu(__h_m_s_ms); + opal_to_tm(y_m_d, h_m_s_ms, tm); + + return 0; +} + +static int opal_set_rtc_time(struct device *dev, struct rtc_time *tm) +{ + s64 rc = OPAL_BUSY; + int retries = 10; + u32 y_m_d = 0; + u64 h_m_s_ms = 0; + + tm_to_opal(tm, &y_m_d, &h_m_s_ms); + + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_rtc_write(y_m_d, h_m_s_ms); + if (rc == OPAL_BUSY_EVENT) { + msleep(OPAL_BUSY_DELAY_MS); + opal_poll_events(NULL); + } else if (rc == OPAL_BUSY) { + msleep(OPAL_BUSY_DELAY_MS); + } else if (rc == OPAL_HARDWARE || rc == OPAL_INTERNAL_ERROR) { + if (retries--) { + msleep(10); /* Wait 10ms before retry */ + rc = OPAL_BUSY; /* go around again */ + } + } + } + + return rc == OPAL_SUCCESS ? 0 : -EIO; +} + +/* + * TPO Timed Power-On + * + * TPO get/set OPAL calls care about the hour and min and to make it consistent + * with the rtc utility time conversion functions, we use the 'u64' to store + * its value and perform bit shift by 32 before use.. + */ +static int opal_get_tpo_time(struct device *dev, struct rtc_wkalrm *alarm) +{ + __be32 __y_m_d, __h_m; + struct opal_msg msg; + int rc, token; + u64 h_m_s_ms; + u32 y_m_d; + + token = opal_async_get_token_interruptible(); + if (token < 0) { + if (token != -ERESTARTSYS) + pr_err("Failed to get the async token\n"); + + return token; + } + + rc = opal_tpo_read(token, &__y_m_d, &__h_m); + if (rc != OPAL_ASYNC_COMPLETION) { + rc = -EIO; + goto exit; + } + + rc = opal_async_wait_response(token, &msg); + if (rc) { + rc = -EIO; + goto exit; + } + + rc = opal_get_async_rc(msg); + if (rc != OPAL_SUCCESS) { + rc = -EIO; + goto exit; + } + + y_m_d = be32_to_cpu(__y_m_d); + h_m_s_ms = ((u64)be32_to_cpu(__h_m) << 32); + + /* check if no alarm is set */ + if (y_m_d == 0 && h_m_s_ms == 0) { + pr_debug("No alarm is set\n"); + rc = -ENOENT; + goto exit; + } else { + pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms); + } + + opal_to_tm(y_m_d, h_m_s_ms, &alarm->time); + +exit: + opal_async_release_token(token); + return rc; +} + +/* Set Timed Power-On */ +static int opal_set_tpo_time(struct device *dev, struct rtc_wkalrm *alarm) +{ + u64 h_m_s_ms = 0; + struct opal_msg msg; + u32 y_m_d = 0; + int token, rc; + + /* if alarm is enabled */ + if (alarm->enabled) { + tm_to_opal(&alarm->time, &y_m_d, &h_m_s_ms); + pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms); + + } else { + pr_debug("Alarm getting disabled\n"); + } + + token = opal_async_get_token_interruptible(); + if (token < 0) { + if (token != -ERESTARTSYS) + pr_err("Failed to get the async token\n"); + + return token; + } + + /* TPO, we care about hour and minute */ + rc = opal_tpo_write(token, y_m_d, + (u32)((h_m_s_ms >> 32) & 0xffff0000)); + if (rc != OPAL_ASYNC_COMPLETION) { + rc = -EIO; + goto exit; + } + + rc = opal_async_wait_response(token, &msg); + if (rc) { + rc = -EIO; + goto exit; + } + + rc = opal_get_async_rc(msg); + if (rc != OPAL_SUCCESS) + rc = -EIO; + +exit: + opal_async_release_token(token); + return rc; +} + +static int opal_tpo_alarm_irq_enable(struct device *dev, unsigned int enabled) +{ + struct rtc_wkalrm alarm = { .enabled = 0 }; + + /* + * TPO is automatically enabled when opal_set_tpo_time() is called with + * non-zero rtc-time. We only handle disable case which needs to be + * explicitly told to opal. + */ + return enabled ? 0 : opal_set_tpo_time(dev, &alarm); +} + +static const struct rtc_class_ops opal_rtc_ops = { + .read_time = opal_get_rtc_time, + .set_time = opal_set_rtc_time, + .read_alarm = opal_get_tpo_time, + .set_alarm = opal_set_tpo_time, + .alarm_irq_enable = opal_tpo_alarm_irq_enable, +}; + +static int opal_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + + rtc = devm_rtc_allocate_device(&pdev->dev); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + if (pdev->dev.of_node && + (of_property_read_bool(pdev->dev.of_node, "wakeup-source") || + of_property_read_bool(pdev->dev.of_node, "has-tpo")/* legacy */)) + device_set_wakeup_capable(&pdev->dev, true); + else + clear_bit(RTC_FEATURE_ALARM, rtc->features); + + rtc->ops = &opal_rtc_ops; + rtc->range_min = RTC_TIMESTAMP_BEGIN_0000; + rtc->range_max = RTC_TIMESTAMP_END_9999; + clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->features); + + return devm_rtc_register_device(rtc); +} + +static const struct of_device_id opal_rtc_match[] = { + { + .compatible = "ibm,opal-rtc", + }, + { } +}; +MODULE_DEVICE_TABLE(of, opal_rtc_match); + +static const struct platform_device_id opal_rtc_driver_ids[] = { + { + .name = "opal-rtc", + }, + { } +}; +MODULE_DEVICE_TABLE(platform, opal_rtc_driver_ids); + +static struct platform_driver opal_rtc_driver = { + .probe = opal_rtc_probe, + .id_table = opal_rtc_driver_ids, + .driver = { + .name = DRVNAME, + .of_match_table = opal_rtc_match, + }, +}; + +static int __init opal_rtc_init(void) +{ + if (!firmware_has_feature(FW_FEATURE_OPAL)) + return -ENODEV; + + return platform_driver_register(&opal_rtc_driver); +} + +static void __exit opal_rtc_exit(void) +{ + platform_driver_unregister(&opal_rtc_driver); +} + +MODULE_AUTHOR("Neelesh Gupta "); +MODULE_DESCRIPTION("IBM OPAL RTC driver"); +MODULE_LICENSE("GPL"); + +module_init(opal_rtc_init); +module_exit(opal_rtc_exit); -- cgit v1.3.1