From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- drivers/rtc/rtc-max6916.c | 160 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) create mode 100644 drivers/rtc/rtc-max6916.c (limited to 'drivers/rtc/rtc-max6916.c') diff --git a/drivers/rtc/rtc-max6916.c b/drivers/rtc/rtc-max6916.c new file mode 100644 index 000000000..e72e768ab --- /dev/null +++ b/drivers/rtc/rtc-max6916.c @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* rtc-max6916.c + * + * Driver for MAXIM max6916 Low Current, SPI Compatible + * Real Time Clock + * + * Author : Venkat Prashanth B U + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Registers in max6916 rtc */ + +#define MAX6916_SECONDS_REG 0x01 +#define MAX6916_MINUTES_REG 0x02 +#define MAX6916_HOURS_REG 0x03 +#define MAX6916_DATE_REG 0x04 +#define MAX6916_MONTH_REG 0x05 +#define MAX6916_DAY_REG 0x06 +#define MAX6916_YEAR_REG 0x07 +#define MAX6916_CONTROL_REG 0x08 +#define MAX6916_STATUS_REG 0x0C +#define MAX6916_CLOCK_BURST 0x3F + +static int max6916_read_reg(struct device *dev, unsigned char address, + unsigned char *data) +{ + struct spi_device *spi = to_spi_device(dev); + + *data = address | 0x80; + + return spi_write_then_read(spi, data, 1, data, 1); +} + +static int max6916_write_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned char buf[2]; + + buf[0] = address & 0x7F; + buf[1] = data; + + return spi_write_then_read(spi, buf, 2, NULL, 0); +} + +static int max6916_read_time(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + int err; + unsigned char buf[8]; + + buf[0] = MAX6916_CLOCK_BURST | 0x80; + + err = spi_write_then_read(spi, buf, 1, buf, 8); + + if (err) + return err; + + dt->tm_sec = bcd2bin(buf[0]); + dt->tm_min = bcd2bin(buf[1]); + dt->tm_hour = bcd2bin(buf[2] & 0x3F); + dt->tm_mday = bcd2bin(buf[3]); + dt->tm_mon = bcd2bin(buf[4]) - 1; + dt->tm_wday = bcd2bin(buf[5]) - 1; + dt->tm_year = bcd2bin(buf[6]) + 100; + + return 0; +} + +static int max6916_set_time(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned char buf[9]; + + if (dt->tm_year < 100 || dt->tm_year > 199) { + dev_err(&spi->dev, "Year must be between 2000 and 2099. It's %d.\n", + dt->tm_year + 1900); + return -EINVAL; + } + + buf[0] = MAX6916_CLOCK_BURST & 0x7F; + buf[1] = bin2bcd(dt->tm_sec); + buf[2] = bin2bcd(dt->tm_min); + buf[3] = (bin2bcd(dt->tm_hour) & 0X3F); + buf[4] = bin2bcd(dt->tm_mday); + buf[5] = bin2bcd(dt->tm_mon + 1); + buf[6] = bin2bcd(dt->tm_wday + 1); + buf[7] = bin2bcd(dt->tm_year % 100); + buf[8] = bin2bcd(0x00); + + /* write the rtc settings */ + return spi_write_then_read(spi, buf, 9, NULL, 0); +} + +static const struct rtc_class_ops max6916_rtc_ops = { + .read_time = max6916_read_time, + .set_time = max6916_set_time, +}; + +static int max6916_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char data; + int res; + + /* spi setup with max6916 in mode 3 and bits per word as 8 */ + spi->mode = SPI_MODE_3; + spi->bits_per_word = 8; + spi_setup(spi); + + /* RTC Settings */ + res = max6916_read_reg(&spi->dev, MAX6916_SECONDS_REG, &data); + if (res) + return res; + + /* Disable the write protect of rtc */ + max6916_read_reg(&spi->dev, MAX6916_CONTROL_REG, &data); + data = data & ~(1 << 7); + max6916_write_reg(&spi->dev, MAX6916_CONTROL_REG, data); + + /*Enable oscillator,disable oscillator stop flag, glitch filter*/ + max6916_read_reg(&spi->dev, MAX6916_STATUS_REG, &data); + data = data & 0x1B; + max6916_write_reg(&spi->dev, MAX6916_STATUS_REG, data); + + /* display the settings */ + max6916_read_reg(&spi->dev, MAX6916_CONTROL_REG, &data); + dev_info(&spi->dev, "MAX6916 RTC CTRL Reg = 0x%02x\n", data); + + max6916_read_reg(&spi->dev, MAX6916_STATUS_REG, &data); + dev_info(&spi->dev, "MAX6916 RTC Status Reg = 0x%02x\n", data); + + rtc = devm_rtc_device_register(&spi->dev, "max6916", + &max6916_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + spi_set_drvdata(spi, rtc); + + return 0; +} + +static struct spi_driver max6916_driver = { + .driver = { + .name = "max6916", + }, + .probe = max6916_probe, +}; +module_spi_driver(max6916_driver); + +MODULE_DESCRIPTION("MAX6916 SPI RTC DRIVER"); +MODULE_AUTHOR("Venkat Prashanth B U "); +MODULE_LICENSE("GPL v2"); -- cgit v1.3.1