From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- drivers/rtc/rtc-max6902.c | 154 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 154 insertions(+) create mode 100644 drivers/rtc/rtc-max6902.c (limited to 'drivers/rtc/rtc-max6902.c') diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c new file mode 100644 index 000000000..daaeb6fb6 --- /dev/null +++ b/drivers/rtc/rtc-max6902.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* drivers/rtc/rtc-max6902.c + * + * Copyright (C) 2006 8D Technologies inc. + * Copyright (C) 2004 Compulab Ltd. + * + * Driver for MAX6902 spi RTC + */ + +#include +#include +#include +#include +#include +#include +#include + +#define MAX6902_REG_SECONDS 0x01 +#define MAX6902_REG_MINUTES 0x03 +#define MAX6902_REG_HOURS 0x05 +#define MAX6902_REG_DATE 0x07 +#define MAX6902_REG_MONTH 0x09 +#define MAX6902_REG_DAY 0x0B +#define MAX6902_REG_YEAR 0x0D +#define MAX6902_REG_CONTROL 0x0F +#define MAX6902_REG_CENTURY 0x13 + +static int max6902_set_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned char buf[2]; + + /* MSB must be '0' to write */ + buf[0] = address & 0x7f; + buf[1] = data; + + return spi_write_then_read(spi, buf, 2, NULL, 0); +} + +static int max6902_get_reg(struct device *dev, unsigned char address, + unsigned char *data) +{ + struct spi_device *spi = to_spi_device(dev); + + /* Set MSB to indicate read */ + *data = address | 0x80; + + return spi_write_then_read(spi, data, 1, data, 1); +} + +static int max6902_read_time(struct device *dev, struct rtc_time *dt) +{ + int err, century; + struct spi_device *spi = to_spi_device(dev); + unsigned char buf[8]; + + buf[0] = 0xbf; /* Burst read */ + + err = spi_write_then_read(spi, buf, 1, buf, 8); + if (err != 0) + return err; + + /* The chip sends data in this order: + * Seconds, Minutes, Hours, Date, Month, Day, Year */ + dt->tm_sec = bcd2bin(buf[0]); + dt->tm_min = bcd2bin(buf[1]); + dt->tm_hour = bcd2bin(buf[2]); + dt->tm_mday = bcd2bin(buf[3]); + dt->tm_mon = bcd2bin(buf[4]) - 1; + dt->tm_wday = bcd2bin(buf[5]); + dt->tm_year = bcd2bin(buf[6]); + + /* Read century */ + err = max6902_get_reg(dev, MAX6902_REG_CENTURY, &buf[0]); + if (err != 0) + return err; + + century = bcd2bin(buf[0]) * 100; + + dt->tm_year += century; + dt->tm_year -= 1900; + + return 0; +} + +static int max6902_set_time(struct device *dev, struct rtc_time *dt) +{ + dt->tm_year = dt->tm_year + 1900; + + /* Remove write protection */ + max6902_set_reg(dev, MAX6902_REG_CONTROL, 0); + + max6902_set_reg(dev, MAX6902_REG_SECONDS, bin2bcd(dt->tm_sec)); + max6902_set_reg(dev, MAX6902_REG_MINUTES, bin2bcd(dt->tm_min)); + max6902_set_reg(dev, MAX6902_REG_HOURS, bin2bcd(dt->tm_hour)); + + max6902_set_reg(dev, MAX6902_REG_DATE, bin2bcd(dt->tm_mday)); + max6902_set_reg(dev, MAX6902_REG_MONTH, bin2bcd(dt->tm_mon + 1)); + max6902_set_reg(dev, MAX6902_REG_DAY, bin2bcd(dt->tm_wday)); + max6902_set_reg(dev, MAX6902_REG_YEAR, bin2bcd(dt->tm_year % 100)); + max6902_set_reg(dev, MAX6902_REG_CENTURY, bin2bcd(dt->tm_year / 100)); + + /* Compulab used a delay here. However, the datasheet + * does not mention a delay being required anywhere... */ + /* delay(2000); */ + + /* Write protect */ + max6902_set_reg(dev, MAX6902_REG_CONTROL, 0x80); + + return 0; +} + +static const struct rtc_class_ops max6902_rtc_ops = { + .read_time = max6902_read_time, + .set_time = max6902_set_time, +}; + +static int max6902_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char tmp; + int res; + + spi->mode = SPI_MODE_3; + spi->bits_per_word = 8; + spi_setup(spi); + + res = max6902_get_reg(&spi->dev, MAX6902_REG_SECONDS, &tmp); + if (res != 0) + return res; + + rtc = devm_rtc_device_register(&spi->dev, "max6902", + &max6902_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + spi_set_drvdata(spi, rtc); + return 0; +} + +static struct spi_driver max6902_driver = { + .driver = { + .name = "rtc-max6902", + }, + .probe = max6902_probe, +}; + +module_spi_driver(max6902_driver); + +MODULE_DESCRIPTION("max6902 spi RTC driver"); +MODULE_AUTHOR("Raphael Assenat"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:rtc-max6902"); -- cgit v1.3.1