From a9ed3aa9b87ee41e8ab3ff471b1331c154767e45 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sat, 26 Sep 2026 07:57:59 +1000 Subject: Merge tag 'drm-misc-fixes-2026-09-24' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes A number of fixes: - bridge: - samsung-dsim: fix GPIO lifetime - client: Null pointer dereference fix - imagination: error handling fix, page handling fix - nouveau: fix reference leaks, double-frees, out-of-bounds accesses, use-after-frees, don't reject config without SCDC, a number of workarounds - virtio: fix memory leak, reference leaks, null pointer dereference, add pixel blend mode, cache coherency fix Signed-off-by: Dave Airlie From: Maxime Ripard Link: https://patch.msgid.link/arU22zzqUGDEco1y@houat --- drivers/phy/ti/Kconfig | 123 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 drivers/phy/ti/Kconfig (limited to 'drivers/phy/ti/Kconfig') diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig new file mode 100644 index 000000000..b52c7eabe --- /dev/null +++ b/drivers/phy/ti/Kconfig @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Phy drivers for TI platforms +# +config OMAP_CONTROL_PHY + tristate "OMAP CONTROL PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + help + Enable this to add support for the PHY part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY/SATA PHY/PCIE PHY + (PIPE3 PHY). + +config OMAP_USB2 + tristate "OMAP USB2 PHY Driver" + depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS || COMPILE_TEST + help + Enable this to support the transceiver that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + The USB OTG controller communicates with the comparator using this + driver. + +config PHY_AM654_SERDES + tristate "TI AM654 SERDES support" + depends on OF && (ARCH_K3 || COMPILE_TEST) + depends on COMMON_CLK + select GENERIC_PHY + select MULTIPLEXER + select REGMAP_MMIO + select MUX_MMIO + help + This option enables support for TI AM654 SerDes PHY used for + PCIe. + +config PHY_DA8XX_USB + tristate "TI DA8xx USB PHY Driver" + depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the USB PHY on DA8xx SoCs. + + This driver controls both the USB 1.1 PHY and the USB 2.0 PHY. + +config PHY_DM816X_USB + tristate "TI dm816x USB PHY driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this for dm816x USB to work. + +config PHY_J721E_WIZ + tristate "TI J721E WIZ (SERDES Wrapper) support" + depends on OF && (ARCH_K3 || COMPILE_TEST) + depends on HAS_IOMEM && OF_ADDRESS + depends on COMMON_CLK + select GENERIC_PHY + select MULTIPLEXER + select REGMAP_MMIO + select MUX_MMIO + help + This option enables support for WIZ module present in TI's J721E + SoC. WIZ is a serdes wrapper used to configure some of the input + signals to the SERDES (Sierra/Torrent). This driver configures + three clock selects (pll0, pll1, dig) and resets for each of the + lanes. + +config PHY_TI_DS125DF111 + tristate "TI DS125DF111 2-Channel Retimer Driver" + depends on OF && I2C + select GENERIC_PHY + help + Enable this to add support for configuration and runtime management + of the TI DS125DF111 Multi-Protocol 2-Channel Retimer. + The retimer is modeled as a Generic PHY and supports both 10G and 1G + link speeds. + +config PHY_TI_GMII_SEL + tristate + select GENERIC_PHY + select REGMAP + help + This driver supports configuring of the TI CPSW Port mode depending on + the Ethernet PHY connected to the CPSW Port. + +config PHY_TUSB1210 + tristate "TI TUSB1210 ULPI PHY module" + depends on USB_ULPI_BUS + select GENERIC_PHY + help + Support for TI TUSB1210 USB ULPI PHY. + +config TI_PIPE3 + tristate "TI PIPE3 PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + select GENERIC_PHY + select OMAP_CONTROL_PHY + help + Enable this to support the PIPE3 PHY that is part of TI SOCs. This + driver takes care of all the PHY functionality apart from comparator. + This driver interacts with the "OMAP Control PHY Driver" to power + on/off the PHY. + +config TWL4030_USB + tristate "TWL4030 USB Transceiver Driver" + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS + depends on USB_SUPPORT + depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y' + select GENERIC_PHY + select USB_PHY + help + Enable this to support the USB OTG transceiver on TWL4030 + family chips (including the TWL5030 and TPS659x0 devices). + This transceiver supports high and full speed devices plus, + in host mode, low speed. -- cgit v1.3.1