From dd05add7b2b6004c5fa3a1f276f56d8668f86b65 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Sat, 26 Sep 2026 19:20:30 -0300 Subject: netfs: zero the tail of a short DIO/unbuffered read The buffered read collector zero-fills the tail of a short read that stops below the inode's i_size (netfs_clear_unread()), so a read that races an extending write still returns the expected number of bytes. The non-buffered collector path does no such thing: it just records how much was transferred. Add the same zero-fill for the non-buffered case, gated on NETFS_SREQ_CLEAR_TAIL: a subreq's source sets that flag when a short result from it is known to be safe to treat as a hole, as opposed to NETFS_SREQ_HIT_EOF, which means the read genuinely ran off the end of the file and should be reported short as-is. Only CLEAR_TAIL should zero-fill here; a real EOF must stay a real short read. No source currently sets CLEAR_TAIL on an unbuffered/DIO subrequest, so this is inert on its own -- a following change teaches cifs to set it in the one case that needs it. Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item") Reviewed-by: David Howells Reviewed-by: Namjae Jeon Signed-off-by: Paulo Alcantara Cc: Christian Brauner Cc: Matthew Wilcox Cc: Ronnie Sahlberg Cc: Shyam Prasad N Cc: Tom Talpey Cc: Bharath SM Cc: stable@vger.kernel.org --- drivers/phy/st/Kconfig | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 drivers/phy/st/Kconfig (limited to 'drivers/phy/st/Kconfig') diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig new file mode 100644 index 000000000..49206185e --- /dev/null +++ b/drivers/phy/st/Kconfig @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Phy drivers for STMicro platforms +# +config PHY_MIPHY28LP + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" + depends on ARCH_STI || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the miphy transceiver (for SATA/PCIE/USB3) + that is part of STMicroelectronics STiH407 SoC. + +config PHY_ST_SPEAR1310_MIPHY + tristate "ST SPEAR1310-MIPHY driver" + select GENERIC_PHY + depends on MACH_SPEAR1310 || COMPILE_TEST + help + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. + +config PHY_ST_SPEAR1340_MIPHY + tristate "ST SPEAR1340-MIPHY driver" + select GENERIC_PHY + depends on MACH_SPEAR1340 || COMPILE_TEST + help + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. + +config PHY_STIH407_USB + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" + depends on RESET_CONTROLLER + depends on ARCH_STI || COMPILE_TEST + select GENERIC_PHY + help + Enable this support to enable the picoPHY device used by USB2 + and USB3 controllers on STMicroelectronics STiH407 SoC families. + +config PHY_STM32_COMBOPHY + tristate "STMicroelectronics COMBOPHY driver for STM32MP25" + depends on ARCH_STM32 || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the COMBOPHY device used by USB3 or PCIe + controllers on STMicroelectronics STM32MP25 SoC. + This driver controls the COMBOPHY block to generate the PCIe 100Mhz + reference clock from either the external clock generator or HSE + internal SoC clock source. + +config PHY_STM32_USBPHYC + tristate "STMicroelectronics STM32 USB HS PHY Controller driver" + depends on ARCH_STM32 || COMPILE_TEST + depends on COMMON_CLK + select GENERIC_PHY + help + Enable this to support the High-Speed USB transceivers that are part + of some STMicroelectronics STM32 SoCs. + + This driver controls the entire USB PHY block: the USB PHY controller + (USBPHYC) and the two 8-bit wide UTMI+ interfaces. First interface is + used by an HS USB Host controller, and the second one is shared + between an HS USB OTG controller and an HS USB Host controller, + selected by a USB switch. -- cgit v1.3.1