From 78004e9a87f240df03e2f73120d291763c32e0a7 Mon Sep 17 00:00:00 2001 From: Ali Ahmet Memis Date: Fri, 21 Aug 2026 01:45:27 +0000 Subject: openrisc: fix arbitrary kernel memory access via or1k_atomic syscall sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user pointers, v1 and v2, and swaps the words they point to in hand-written assembly. l.lwz r29,0(r4) l.lwz r27,0(r5) l.sw 0(r4),r27 l.sw 0(r5),r29 The pointers are not checked with access_ok(). The four memory accesses also have no exception table entries. A caller passes a kernel address as either pointer, and the syscall reads from and writes to it directly. This gives an unprivileged process a kernel read/write primitive. It overwrites kernel data such as the sys_call_table, gaining code execution in kernel context. Check both pointers before entering the critical section. Add fixups for the four memory accesses so faults on valid but unmapped user addresses return -EFAULT. [shorne@gmail.com: fix comment style] Fixes: 9d02a4283e9c ("OpenRISC: Boot code") Cc: stable@vger.kernel.org Signed-off-by: Ali Ahmet Memis Signed-off-by: Stafford Horne --- drivers/phy/st/Kconfig | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 drivers/phy/st/Kconfig (limited to 'drivers/phy/st/Kconfig') diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig new file mode 100644 index 000000000..49206185e --- /dev/null +++ b/drivers/phy/st/Kconfig @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Phy drivers for STMicro platforms +# +config PHY_MIPHY28LP + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" + depends on ARCH_STI || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the miphy transceiver (for SATA/PCIE/USB3) + that is part of STMicroelectronics STiH407 SoC. + +config PHY_ST_SPEAR1310_MIPHY + tristate "ST SPEAR1310-MIPHY driver" + select GENERIC_PHY + depends on MACH_SPEAR1310 || COMPILE_TEST + help + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. + +config PHY_ST_SPEAR1340_MIPHY + tristate "ST SPEAR1340-MIPHY driver" + select GENERIC_PHY + depends on MACH_SPEAR1340 || COMPILE_TEST + help + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. + +config PHY_STIH407_USB + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" + depends on RESET_CONTROLLER + depends on ARCH_STI || COMPILE_TEST + select GENERIC_PHY + help + Enable this support to enable the picoPHY device used by USB2 + and USB3 controllers on STMicroelectronics STiH407 SoC families. + +config PHY_STM32_COMBOPHY + tristate "STMicroelectronics COMBOPHY driver for STM32MP25" + depends on ARCH_STM32 || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the COMBOPHY device used by USB3 or PCIe + controllers on STMicroelectronics STM32MP25 SoC. + This driver controls the COMBOPHY block to generate the PCIe 100Mhz + reference clock from either the external clock generator or HSE + internal SoC clock source. + +config PHY_STM32_USBPHYC + tristate "STMicroelectronics STM32 USB HS PHY Controller driver" + depends on ARCH_STM32 || COMPILE_TEST + depends on COMMON_CLK + select GENERIC_PHY + help + Enable this to support the High-Speed USB transceivers that are part + of some STMicroelectronics STM32 SoCs. + + This driver controls the entire USB PHY block: the USB PHY controller + (USBPHYC) and the two 8-bit wide UTMI+ interfaces. First interface is + used by an HS USB Host controller, and the second one is shared + between an HS USB OTG controller and an HS USB Host controller, + selected by a USB switch. -- cgit v1.3.1