From 93de2a6a4b91b72607136dd656edf03fb399d27f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 23 Sep 2026 09:37:21 -0700 Subject: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical. Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration") Cc: stable@vger.kernel.org Reported-by: Stefan Teodorescu Signed-off-by: Sean Christopherson Message-ID: <20260923163721.1584779-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- drivers/phy/sophgo/Kconfig | 19 ++++ drivers/phy/sophgo/Makefile | 2 + drivers/phy/sophgo/phy-cv1800-usb2.c | 169 +++++++++++++++++++++++++++++++++++ 3 files changed, 190 insertions(+) create mode 100644 drivers/phy/sophgo/Kconfig create mode 100644 drivers/phy/sophgo/Makefile create mode 100644 drivers/phy/sophgo/phy-cv1800-usb2.c (limited to 'drivers/phy/sophgo') diff --git a/drivers/phy/sophgo/Kconfig b/drivers/phy/sophgo/Kconfig new file mode 100644 index 000000000..2c943bbe1 --- /dev/null +++ b/drivers/phy/sophgo/Kconfig @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Phy drivers for Sophgo platforms +# + +if ARCH_SOPHGO || COMPILE_TEST + +config PHY_SOPHGO_CV1800_USB2 + tristate "Sophgo CV18XX/SG200X USB 2.0 PHY support" + depends on MFD_SYSCON + depends on USB_SUPPORT + select GENERIC_PHY + help + Enable this to support the USB 2.0 PHY used with + the DWC2 USB controller in Sophgo CV18XX/SG200X + series SoC. + If unsure, say N. + +endif # ARCH_SOPHGO || COMPILE_TEST diff --git a/drivers/phy/sophgo/Makefile b/drivers/phy/sophgo/Makefile new file mode 100644 index 000000000..318060661 --- /dev/null +++ b/drivers/phy/sophgo/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PHY_SOPHGO_CV1800_USB2) += phy-cv1800-usb2.o diff --git a/drivers/phy/sophgo/phy-cv1800-usb2.c b/drivers/phy/sophgo/phy-cv1800-usb2.c new file mode 100644 index 000000000..6fe846534 --- /dev/null +++ b/drivers/phy/sophgo/phy-cv1800-usb2.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Inochi Amaoto + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_USB_PHY_CTRL 0x048 + +#define PHY_VBUS_POWER_EN BIT(0) +#define PHY_VBUS_POWER BIT(1) +#define PHY_ID_OVERWRITE_EN BIT(6) +#define PHY_ID_OVERWRITE_MODE BIT(7) +#define PHY_ID_OVERWRITE_MODE_HOST FIELD_PREP(BIT(7), 0) +#define PHY_ID_OVERWRITE_MODE_DEVICE FIELD_PREP(BIT(7), 1) + +#define PHY_APP_CLK_RATE 125000000 +#define PHY_LPM_CLK_RATE 12000000 +#define PHY_STB_CLK_RATE 333334 + +struct cv1800_usb_phy { + struct phy *phy; + struct regmap *syscon; + spinlock_t lock; + struct clk *usb_app_clk; + struct clk *usb_lpm_clk; + struct clk *usb_stb_clk; + bool support_otg; +}; + +static int cv1800_usb_phy_set_mode(struct phy *_phy, + enum phy_mode mode, int submode) +{ + struct cv1800_usb_phy *phy = phy_get_drvdata(_phy); + unsigned int regval = 0; + int ret; + + dev_info(&phy->phy->dev, "set mode %d", (int)mode); + + switch (mode) { + case PHY_MODE_USB_DEVICE: + regval = PHY_ID_OVERWRITE_EN | PHY_ID_OVERWRITE_MODE_DEVICE; + regmap_clear_bits(phy->syscon, REG_USB_PHY_CTRL, PHY_VBUS_POWER); + break; + case PHY_MODE_USB_HOST: + regval = PHY_ID_OVERWRITE_EN | PHY_ID_OVERWRITE_MODE_HOST; + regmap_set_bits(phy->syscon, REG_USB_PHY_CTRL, PHY_VBUS_POWER); + break; + case PHY_MODE_USB_OTG: + if (!phy->support_otg) + return 0; + + ret = regmap_read(phy->syscon, REG_USB_PHY_CTRL, ®val); + if (ret) + return ret; + + regval = FIELD_GET(PHY_ID_OVERWRITE_MODE, regval); + break; + default: + return -EINVAL; + } + + return regmap_update_bits(phy->syscon, REG_USB_PHY_CTRL, + PHY_ID_OVERWRITE_EN | PHY_ID_OVERWRITE_MODE, + regval); +} + +static int cv1800_usb_phy_set_clock(struct cv1800_usb_phy *phy) +{ + int ret; + + ret = clk_set_rate(phy->usb_app_clk, PHY_APP_CLK_RATE); + if (ret) + return ret; + + ret = clk_set_rate(phy->usb_lpm_clk, PHY_LPM_CLK_RATE); + if (ret) + return ret; + + return clk_set_rate(phy->usb_stb_clk, PHY_STB_CLK_RATE); +} + +static const struct phy_ops cv1800_usb_phy_ops = { + .set_mode = cv1800_usb_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int cv1800_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + struct cv1800_usb_phy *phy; + struct phy_provider *phy_provider; + int ret; + + if (!parent) + return -ENODEV; + + phy = devm_kmalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->syscon = syscon_node_to_regmap(parent->of_node); + if (IS_ERR_OR_NULL(phy->syscon)) + return -ENODEV; + + phy->support_otg = false; + + spin_lock_init(&phy->lock); + + phy->usb_app_clk = devm_clk_get_enabled(dev, "app"); + if (IS_ERR(phy->usb_app_clk)) + return dev_err_probe(dev, PTR_ERR(phy->usb_app_clk), + "Failed to get app clock\n"); + + phy->usb_lpm_clk = devm_clk_get_enabled(dev, "lpm"); + if (IS_ERR(phy->usb_lpm_clk)) + return dev_err_probe(dev, PTR_ERR(phy->usb_lpm_clk), + "Failed to get lpm clock\n"); + + phy->usb_stb_clk = devm_clk_get_enabled(dev, "stb"); + if (IS_ERR(phy->usb_stb_clk)) + return dev_err_probe(dev, PTR_ERR(phy->usb_stb_clk), + "Failed to get stb clock\n"); + + phy->phy = devm_phy_create(dev, NULL, &cv1800_usb_phy_ops); + if (IS_ERR(phy->phy)) + return dev_err_probe(dev, PTR_ERR(phy->phy), + "Failed to create phy\n"); + + ret = cv1800_usb_phy_set_clock(phy); + if (ret) + return ret; + + phy_set_drvdata(phy->phy, phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id cv1800_usb_phy_ids[] = { + { .compatible = "sophgo,cv1800b-usb2-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, cv1800_usb_phy_ids); + +static struct platform_driver cv1800_usb_phy_driver = { + .probe = cv1800_usb_phy_probe, + .driver = { + .name = "cv1800-usb2-phy", + .of_match_table = cv1800_usb_phy_ids, + }, +}; +module_platform_driver(cv1800_usb_phy_driver); + +MODULE_AUTHOR("Inochi Amaoto "); +MODULE_DESCRIPTION("CV1800/SG2000 SoC USB 2.0 PHY driver"); +MODULE_LICENSE("GPL"); -- cgit v1.3.1