From 93de2a6a4b91b72607136dd656edf03fb399d27f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 23 Sep 2026 09:37:21 -0700 Subject: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical. Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration") Cc: stable@vger.kernel.org Reported-by: Stefan Teodorescu Signed-off-by: Sean Christopherson Message-ID: <20260923163721.1584779-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- drivers/phy/nuvoton/Kconfig | 12 +++ drivers/phy/nuvoton/Makefile | 3 + drivers/phy/nuvoton/phy-ma35d1-usb2.c | 143 ++++++++++++++++++++++++++++++++++ 3 files changed, 158 insertions(+) create mode 100644 drivers/phy/nuvoton/Kconfig create mode 100644 drivers/phy/nuvoton/Makefile create mode 100644 drivers/phy/nuvoton/phy-ma35d1-usb2.c (limited to 'drivers/phy/nuvoton') diff --git a/drivers/phy/nuvoton/Kconfig b/drivers/phy/nuvoton/Kconfig new file mode 100644 index 000000000..d02cae2db --- /dev/null +++ b/drivers/phy/nuvoton/Kconfig @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# PHY drivers for Nuvoton MA35 platforms +# +config PHY_MA35_USB + tristate "Nuvoton MA35 USB2.0 PHY driver" + depends on ARCH_MA35 || COMPILE_TEST + depends on OF + select GENERIC_PHY + help + Enable this to support the USB2.0 PHY on the Nuvoton MA35 + series SoCs. diff --git a/drivers/phy/nuvoton/Makefile b/drivers/phy/nuvoton/Makefile new file mode 100644 index 000000000..2937e3921 --- /dev/null +++ b/drivers/phy/nuvoton/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_PHY_MA35_USB) += phy-ma35d1-usb2.o diff --git a/drivers/phy/nuvoton/phy-ma35d1-usb2.c b/drivers/phy/nuvoton/phy-ma35d1-usb2.c new file mode 100644 index 000000000..9a459b700 --- /dev/null +++ b/drivers/phy/nuvoton/phy-ma35d1-usb2.c @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2024 Nuvoton Technology Corp. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* USB PHY Miscellaneous Control Register */ +#define MA35_SYS_REG_USBPMISCR 0x60 +#define PHY0POR BIT(0) /* PHY Power-On Reset Control Bit */ +#define PHY0SUSPEND BIT(1) /* PHY Suspend; 0: suspend, 1: operaion */ +#define PHY0COMN BIT(2) /* PHY Common Block Power-Down Control */ +#define PHY0DEVCKSTB BIT(10) /* PHY 60 MHz UTMI clock stable bit */ + +struct ma35_usb_phy { + struct clk *clk; + struct device *dev; + struct regmap *sysreg; +}; + +static int ma35_usb_phy_power_on(struct phy *phy) +{ + struct ma35_usb_phy *p_phy = phy_get_drvdata(phy); + unsigned int val; + int ret; + + ret = clk_prepare_enable(p_phy->clk); + if (ret < 0) { + dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret); + return ret; + } + + regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val); + if (val & PHY0SUSPEND) { + /* + * USB PHY0 is in operation mode already + * make sure USB PHY 60 MHz UTMI Interface Clock ready + */ + ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val, + val & PHY0DEVCKSTB, 10, 1000); + if (ret == 0) + return 0; + } + + /* + * reset USB PHY0. + * wait until USB PHY0 60 MHz UTMI Interface Clock ready + */ + regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, (PHY0POR | PHY0SUSPEND)); + udelay(20); + + /* make USB PHY0 enter operation mode */ + regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, PHY0SUSPEND); + + /* make sure USB PHY 60 MHz UTMI Interface Clock ready */ + ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val, + val & PHY0DEVCKSTB, 10, 1000); + if (ret == -ETIMEDOUT) { + dev_err(p_phy->dev, "Check PHY clock, Timeout: %d\n", ret); + clk_disable_unprepare(p_phy->clk); + return ret; + } + + return 0; +} + +static int ma35_usb_phy_power_off(struct phy *phy) +{ + struct ma35_usb_phy *p_phy = phy_get_drvdata(phy); + + clk_disable_unprepare(p_phy->clk); + return 0; +} + +static const struct phy_ops ma35_usb_phy_ops = { + .power_on = ma35_usb_phy_power_on, + .power_off = ma35_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static int ma35_usb_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *provider; + struct ma35_usb_phy *p_phy; + struct phy *phy; + + p_phy = devm_kzalloc(&pdev->dev, sizeof(*p_phy), GFP_KERNEL); + if (!p_phy) + return -ENOMEM; + + p_phy->dev = &pdev->dev; + platform_set_drvdata(pdev, p_phy); + + p_phy->sysreg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "nuvoton,sys"); + if (IS_ERR(p_phy->sysreg)) + return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->sysreg), + "Failed to get SYS registers\n"); + + p_phy->clk = of_clk_get(pdev->dev.of_node, 0); + if (IS_ERR(p_phy->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->clk), + "failed to find usb_phy clock\n"); + + phy = devm_phy_create(&pdev->dev, NULL, &ma35_usb_phy_ops); + if (IS_ERR(phy)) + return dev_err_probe(&pdev->dev, PTR_ERR(phy), "Failed to create PHY\n"); + + phy_set_drvdata(phy, p_phy); + + provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); + if (IS_ERR(provider)) + return dev_err_probe(&pdev->dev, PTR_ERR(provider), + "Failed to register PHY provider\n"); + return 0; +} + +static const struct of_device_id ma35_usb_phy_of_match[] = { + { .compatible = "nuvoton,ma35d1-usb2-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, ma35_usb_phy_of_match); + +static struct platform_driver ma35_usb_phy_driver = { + .probe = ma35_usb_phy_probe, + .driver = { + .name = "ma35d1-usb2-phy", + .of_match_table = ma35_usb_phy_of_match, + }, +}; +module_platform_driver(ma35_usb_phy_driver); + +MODULE_DESCRIPTION("Nuvoton ma35d1 USB2.0 PHY driver"); +MODULE_AUTHOR("Hui-Ping Chen "); +MODULE_LICENSE("GPL"); -- cgit v1.3.1