From 2bc6b218717b9d08f466f88209251d54bc09b207 Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Tue, 22 Sep 2026 19:14:30 +0100 Subject: arm64/boot: Disable trapping of PMZR_EL0 writes to EL2 __init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2. PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a write from EL0 reaches the trap and takes the host down without a panic message. Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9 bits. Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9") Cc: stable@vger.kernel.org Signed-off-by: Fuad Tabba Reviewed-by: Anshuman Khandual Reviewed-by: Oliver Upton Signed-off-by: Will Deacon --- drivers/phy/broadcom/Kconfig | 117 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 drivers/phy/broadcom/Kconfig (limited to 'drivers/phy/broadcom/Kconfig') diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig new file mode 100644 index 000000000..46371a894 --- /dev/null +++ b/drivers/phy/broadcom/Kconfig @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Phy drivers for Broadcom platforms +# +menu "PHY drivers for Broadcom platforms" + +config PHY_BCM63XX_USBH + tristate "BCM63xx USBH PHY driver" + depends on BMIPS_GENERIC || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the BCM63xx USBH PHY driver. + If unsure, say N. + +config PHY_CYGNUS_PCIE + tristate "Broadcom Cygnus PCIe PHY driver" + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_CYGNUS + help + Enable this to support the Broadcom Cygnus PCIe PHY. + If unsure, say N. + +config PHY_BCM_SR_USB + tristate "Broadcom Stingray USB PHY driver" + depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom Stingray USB PHY + driver. It supports all versions of Superspeed and + Highspeed PHYs. + If unsure, say N. + +config BCM_KONA_USB2_PHY + tristate "Broadcom Kona USB2 PHY Driver" + depends on HAS_IOMEM + select GENERIC_PHY + help + Enable this to support the Broadcom Kona USB 2.0 PHY. + +config PHY_BCM_NS_USB2 + tristate "Broadcom Northstar USB 2.0 PHY Driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support Broadcom USB 2.0 PHY connected to the USB + controller on Northstar family. + +config PHY_BCM_NS_USB3 + tristate "Broadcom Northstar USB 3.0 PHY Driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF + depends on PHYLIB + select GENERIC_PHY + help + Enable this to support Broadcom USB 3.0 PHY connected to the USB + controller on Northstar family. + +config PHY_NS2_PCIE + tristate "Broadcom Northstar2 PCIe PHY driver" + depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && PHYLIB) + select GENERIC_PHY + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom Northstar2 PCIe PHY. + If unsure, say N. + +config PHY_NS2_USB_DRD + tristate "Broadcom Northstar2 USB DRD PHY support" + depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST) + select GENERIC_PHY + select EXTCON + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom Northstar2 USB DRD PHY. + This driver initializes the PHY in either HOST or DEVICE mode. + The host or device configuration is read from device tree. + + If unsure, say N. + +config PHY_BRCM_SATA + tristate "Broadcom SATA PHY driver" + depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \ + ARCH_BCMBCA || COMPILE_TEST + depends on OF + select GENERIC_PHY + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom SATA PHY. + If unsure, say N. + +config PHY_BRCM_USB + tristate "Broadcom STB USB PHY driver" + depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST + depends on OF + select GENERIC_PHY + select SOC_BRCMSTB if ARCH_BRCMSTB + default ARCH_BCMBCA || ARCH_BRCMSTB + help + Enable this to support the Broadcom STB USB PHY. + This driver is required by the USB XHCI, EHCI and OHCI + drivers. + If unsure, say N. + +config PHY_BCM_SR_PCIE + tristate "Broadcom Stingray PCIe PHY driver" + depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST) + select GENERIC_PHY + select MFD_SYSCON + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom Stingray PCIe PHY + If unsure, say N. + +endmenu -- cgit v1.3.1