From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- drivers/net/team/Kconfig | 77 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) create mode 100644 drivers/net/team/Kconfig (limited to 'drivers/net/team/Kconfig') diff --git a/drivers/net/team/Kconfig b/drivers/net/team/Kconfig new file mode 100644 index 000000000..4d449845d --- /dev/null +++ b/drivers/net/team/Kconfig @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig NET_TEAM + tristate "Ethernet team driver support" + help + This allows one to create virtual interfaces that teams together + multiple ethernet devices. + + Team devices can be added using the "ip" command from the + iproute2 package: + + "ip link add link [ address MAC ] [ NAME ] type team" + + To compile this driver as a module, choose M here: the module + will be called team. + +if NET_TEAM + +config NET_TEAM_MODE_BROADCAST + tristate "Broadcast mode support" + depends on NET_TEAM + help + Basic mode where packets are transmitted always by all suitable ports. + + All added ports are setup to have team's device address. + + To compile this team mode as a module, choose M here: the module + will be called team_mode_broadcast. + +config NET_TEAM_MODE_ROUNDROBIN + tristate "Round-robin mode support" + depends on NET_TEAM + help + Basic mode where port used for transmitting packets is selected in + round-robin fashion using packet counter. + + All added ports are setup to have team's device address. + + To compile this team mode as a module, choose M here: the module + will be called team_mode_roundrobin. + +config NET_TEAM_MODE_RANDOM + tristate "Random mode support" + depends on NET_TEAM + help + Basic mode where port used for transmitting packets is selected + randomly. + + All added ports are setup to have team's device address. + + To compile this team mode as a module, choose M here: the module + will be called team_mode_random. + +config NET_TEAM_MODE_ACTIVEBACKUP + tristate "Active-backup mode support" + depends on NET_TEAM + help + Only one port is active at a time and the rest of ports are used + for backup. + + Mac addresses of ports are not modified. Userspace is responsible + to do so. + + To compile this team mode as a module, choose M here: the module + will be called team_mode_activebackup. + +config NET_TEAM_MODE_LOADBALANCE + tristate "Load-balance mode support" + depends on NET_TEAM + help + This mode provides load balancing functionality. Tx port selection + is done using BPF function set up from userspace (bpf_hash_func + option) + + To compile this team mode as a module, choose M here: the module + will be called team_mode_loadbalance. + +endif # NET_TEAM -- cgit v1.3.1