From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- drivers/net/pse-pd/Kconfig | 83 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 drivers/net/pse-pd/Kconfig (limited to 'drivers/net/pse-pd/Kconfig') diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig new file mode 100644 index 000000000..a0f2ae668 --- /dev/null +++ b/drivers/net/pse-pd/Kconfig @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Ethernet Power Sourcing Equipment drivers +# + +menuconfig PSE_CONTROLLER + bool "Ethernet Power Sourcing Equipment Support" + depends on REGULATOR + help + Generic Power Sourcing Equipment Controller support. + + If unsure, say no. + +if PSE_CONTROLLER + +config PSE_REALTEK_MCU + tristate + help + Shared core for the Realtek PSE MCU driver. This is selected + automatically by the transport options below. + +config PSE_REALTEK_MCU_I2C + tristate "Realtek PSE MCU driver (I2C transport)" + depends on I2C + select PSE_REALTEK_MCU + help + Driver for the microcontroller (MCU) that fronts the PSE + hardware on various Realtek-based managed switches, attached + via I2C/SMBus. The MCU exposes a message-based protocol; the actual + PSE silicon is not accessed directly. To compile this driver as a + module, choose M here: the module will be called realtek-pse-mcu-i2c. + +config PSE_REALTEK_MCU_UART + tristate "Realtek PSE MCU driver (UART transport)" + depends on SERIAL_DEV_BUS + select PSE_REALTEK_MCU + help + Driver for the microcontroller (MCU) that fronts the PSE + hardware on various Realtek-based managed switches, attached + via UART. The MCU exposes a message-based protocol; the actual PSE + silicon is not accessed directly. To compile this driver as a + module, choose M here: the module will be called realtek-pse-mcu-uart. + +config PSE_REGULATOR + tristate "Regulator based PSE controller" + help + This module provides support for simple regulator based Ethernet Power + Sourcing Equipment without automatic classification support. For + example for basic implementation of PoDL (802.3bu) specification. + +config PSE_PD692X0 + tristate "PD692X0 PSE controller" + depends on I2C + select FW_LOADER + select FW_UPLOAD + help + This module provides support for PD692x0 regulator based Ethernet + Power Sourcing Equipment. + + To compile this driver as a module, choose M here: the + module will be called pd692x0. + +config PSE_SI3474 + tristate "Si3474 PSE controller" + depends on I2C + help + This module provides support for Si3474 regulator based Ethernet + Power Sourcing Equipment. + Only 4-pair PSE configurations are supported. + + To compile this driver as a module, choose M here: the + module will be called si3474. + +config PSE_TPS23881 + tristate "TPS23881 PSE controller" + depends on I2C + help + This module provides support for TPS23881 regulator based Ethernet + Power Sourcing Equipment. + + To compile this driver as a module, choose M here: the + module will be called tps23881. +endif -- cgit v1.3.1