From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- drivers/net/phy/swphy.c | 175 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 175 insertions(+) create mode 100644 drivers/net/phy/swphy.c (limited to 'drivers/net/phy/swphy.c') diff --git a/drivers/net/phy/swphy.c b/drivers/net/phy/swphy.c new file mode 100644 index 000000000..59f1ba4d4 --- /dev/null +++ b/drivers/net/phy/swphy.c @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Software PHY emulation + * + * Code taken from fixed_phy.c by Russell King. + * + * Author: Vitaly Bordug + * Anton Vorontsov + * + * Copyright (c) 2006-2007 MontaVista Software, Inc. + */ +#include +#include +#include +#include + +#include "swphy.h" + +#define MII_REGS_NUM 29 + +struct swmii_regs { + u16 bmsr; + u16 lpa; + u16 lpagb; + u16 estat; +}; + +enum { + SWMII_SPEED_10 = 0, + SWMII_SPEED_100, + SWMII_SPEED_1000, + SWMII_DUPLEX_HALF = 0, + SWMII_DUPLEX_FULL, +}; + +/* + * These two tables get bitwise-anded together to produce the final result. + * This means the speed table must contain both duplex settings, and the + * duplex table must contain all speed settings. + */ +static const struct swmii_regs speed[] = { + [SWMII_SPEED_10] = { + .lpa = LPA_10FULL | LPA_10HALF, + }, + [SWMII_SPEED_100] = { + .bmsr = BMSR_100FULL | BMSR_100HALF, + .lpa = LPA_100FULL | LPA_100HALF, + }, + [SWMII_SPEED_1000] = { + .bmsr = BMSR_ESTATEN, + .lpagb = LPA_1000FULL | LPA_1000HALF, + .estat = ESTATUS_1000_TFULL | ESTATUS_1000_THALF, + }, +}; + +static const struct swmii_regs duplex[] = { + [SWMII_DUPLEX_HALF] = { + .bmsr = BMSR_ESTATEN | BMSR_100HALF, + .lpa = LPA_10HALF | LPA_100HALF, + .lpagb = LPA_1000HALF, + .estat = ESTATUS_1000_THALF, + }, + [SWMII_DUPLEX_FULL] = { + .bmsr = BMSR_ESTATEN | BMSR_100FULL, + .lpa = LPA_10FULL | LPA_100FULL, + .lpagb = LPA_1000FULL, + .estat = ESTATUS_1000_TFULL, + }, +}; + +static int swphy_decode_speed(int speed) +{ + switch (speed) { + case 1000: + return SWMII_SPEED_1000; + case 100: + return SWMII_SPEED_100; + case 10: + return SWMII_SPEED_10; + default: + return -EINVAL; + } +} + +/** + * swphy_validate_state - validate the software phy status + * @state: software phy status + * + * This checks that we can represent the state stored in @state can be + * represented in the emulated MII registers. Returns 0 if it can, + * otherwise returns -EINVAL. + */ +int swphy_validate_state(const struct fixed_phy_status *state) +{ + int err; + + if (state->link) { + err = swphy_decode_speed(state->speed); + if (err < 0) { + pr_warn("swphy: unknown speed\n"); + return -EINVAL; + } + } + return 0; +} +EXPORT_SYMBOL_GPL(swphy_validate_state); + +/** + * swphy_read_reg - return a MII register from the fixed phy state + * @reg: MII register + * @state: fixed phy status + * + * Return the MII @reg register generated from the fixed phy state @state. + */ +int swphy_read_reg(int reg, const struct fixed_phy_status *state) +{ + int speed_index, duplex_index; + u16 bmsr = BMSR_ANEGCAPABLE; + u16 estat = 0; + u16 lpagb = 0; + u16 lpa = 0; + + if (reg > MII_REGS_NUM) + return -1; + + speed_index = swphy_decode_speed(state->speed); + if (WARN_ON(speed_index < 0)) + return 0; + + duplex_index = state->duplex ? SWMII_DUPLEX_FULL : SWMII_DUPLEX_HALF; + + bmsr |= speed[speed_index].bmsr & duplex[duplex_index].bmsr; + estat |= speed[speed_index].estat & duplex[duplex_index].estat; + + if (state->link) { + bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE; + + lpa |= speed[speed_index].lpa & duplex[duplex_index].lpa; + lpagb |= speed[speed_index].lpagb & duplex[duplex_index].lpagb; + + if (state->pause) + lpa |= LPA_PAUSE_CAP; + + if (state->asym_pause) + lpa |= LPA_PAUSE_ASYM; + } + + switch (reg) { + case MII_BMCR: + return BMCR_ANENABLE; + case MII_BMSR: + return bmsr; + case MII_PHYSID1: + case MII_PHYSID2: + return 0; + case MII_LPA: + return lpa; + case MII_STAT1000: + return lpagb; + case MII_ESTATUS: + return estat; + + /* + * We do not support emulating Clause 45 over Clause 22 register + * reads. Return an error instead of bogus data. + */ + case MII_MMD_CTRL: + case MII_MMD_DATA: + return -1; + + default: + return 0xffff; + } +} +EXPORT_SYMBOL_GPL(swphy_read_reg); -- cgit v1.3.1