From 119e9db233ad0f4cbd4cfb9f9385a7bca378b37d Mon Sep 17 00:00:00 2001 From: Zeng Chi Date: Mon, 21 Sep 2026 18:24:42 +0800 Subject: KVM: Don't pre-reserve xarray entries when storing empty/NULL attributes Skip the xarray reservation loop when clearing all memory attributes, as storing NULL only erases the entry and never needs to allocate, so no reservation (and no cleanup of a failed one) is required in that case. Suggested-by: Sean Christopherson Cc: David Ballesteros Signed-off-by: Zeng Chi Link: https://patch.msgid.link/20260921102442.1232375-1-zeng_chi911@163.com [sean: split to separate patch] Signed-off-by: Sean Christopherson --- drivers/net/phy/rockchip.c | 200 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 200 insertions(+) create mode 100644 drivers/net/phy/rockchip.c (limited to 'drivers/net/phy/rockchip.c') diff --git a/drivers/net/phy/rockchip.c b/drivers/net/phy/rockchip.c new file mode 100644 index 000000000..b338f385e --- /dev/null +++ b/drivers/net/phy/rockchip.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * drivers/net/phy/rockchip.c + * + * Driver for ROCKCHIP Ethernet PHYs + * + * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd + * + * David Wu + */ + +#include +#include +#include +#include +#include +#include + +#define INTERNAL_EPHY_ID 0x1234d400 + +#define MII_INTERNAL_CTRL_STATUS 17 +#define SMI_ADDR_TSTCNTL 20 +#define SMI_ADDR_TSTREAD1 21 +#define SMI_ADDR_TSTREAD2 22 +#define SMI_ADDR_TSTWRITE 23 +#define MII_SPECIAL_CONTROL_STATUS 31 + +#define MII_AUTO_MDIX_EN BIT(7) +#define MII_MDIX_EN BIT(6) + +#define MII_SPEED_10 BIT(2) +#define MII_SPEED_100 BIT(3) + +#define TSTCNTL_RD (BIT(15) | BIT(10)) +#define TSTCNTL_WR (BIT(14) | BIT(10)) + +#define TSTMODE_ENABLE 0x400 +#define TSTMODE_DISABLE 0x0 + +#define WR_ADDR_A7CFG 0x18 + +static int rockchip_init_tstmode(struct phy_device *phydev) +{ + int ret; + + /* Enable access to Analog and DSP register banks */ + ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE); + if (ret) + return ret; + + ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE); + if (ret) + return ret; + + return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE); +} + +static int rockchip_close_tstmode(struct phy_device *phydev) +{ + /* Back to basic register bank */ + return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE); +} + +static int rockchip_integrated_phy_analog_init(struct phy_device *phydev) +{ + int ret; + + ret = rockchip_init_tstmode(phydev); + if (ret) + return ret; + + /* + * Adjust tx amplitude to make sginal better, + * the default value is 0x8. + */ + ret = phy_write(phydev, SMI_ADDR_TSTWRITE, 0xB); + if (ret) + return ret; + ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTCNTL_WR | WR_ADDR_A7CFG); + if (ret) + return ret; + + return rockchip_close_tstmode(phydev); +} + +static int rockchip_integrated_phy_config_init(struct phy_device *phydev) +{ + int val, ret; + + /* + * The auto MIDX has linked problem on some board, + * workround to disable auto MDIX. + */ + val = phy_read(phydev, MII_INTERNAL_CTRL_STATUS); + if (val < 0) + return val; + val &= ~MII_AUTO_MDIX_EN; + ret = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val); + if (ret) + return ret; + + return rockchip_integrated_phy_analog_init(phydev); +} + +static void rockchip_link_change_notify(struct phy_device *phydev) +{ + /* + * If mode switch happens from 10BT to 100BT, all DSP/AFE + * registers are set to default values. So any AFE/DSP + * registers have to be re-initialized in this case. + */ + if (phydev->state == PHY_RUNNING && phydev->speed == SPEED_100) { + int ret = rockchip_integrated_phy_analog_init(phydev); + + if (ret) + phydev_err(phydev, "rockchip_integrated_phy_analog_init err: %d.\n", + ret); + } +} + +static int rockchip_set_polarity(struct phy_device *phydev, int polarity) +{ + int reg, err, val; + + /* get the current settings */ + reg = phy_read(phydev, MII_INTERNAL_CTRL_STATUS); + if (reg < 0) + return reg; + + reg &= ~MII_AUTO_MDIX_EN; + val = reg; + switch (polarity) { + case ETH_TP_MDI: + val &= ~MII_MDIX_EN; + break; + case ETH_TP_MDI_X: + val |= MII_MDIX_EN; + break; + case ETH_TP_MDI_AUTO: + case ETH_TP_MDI_INVALID: + default: + return 0; + } + + if (val != reg) { + /* Set the new polarity value in the register */ + err = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val); + if (err) + return err; + } + + return 0; +} + +static int rockchip_config_aneg(struct phy_device *phydev) +{ + int err; + + err = rockchip_set_polarity(phydev, phydev->mdix); + if (err < 0) + return err; + + return genphy_config_aneg(phydev); +} + +static int rockchip_phy_resume(struct phy_device *phydev) +{ + genphy_resume(phydev); + + return rockchip_integrated_phy_config_init(phydev); +} + +static struct phy_driver rockchip_phy_driver[] = { +{ + .phy_id = INTERNAL_EPHY_ID, + .phy_id_mask = 0xfffffff0, + .name = "Rockchip integrated EPHY", + /* PHY_BASIC_FEATURES */ + .flags = 0, + .link_change_notify = rockchip_link_change_notify, + .soft_reset = genphy_soft_reset, + .config_init = rockchip_integrated_phy_config_init, + .config_aneg = rockchip_config_aneg, + .suspend = genphy_suspend, + .resume = rockchip_phy_resume, +}, +}; + +module_phy_driver(rockchip_phy_driver); + +static const struct mdio_device_id __maybe_unused rockchip_phy_tbl[] = { + { INTERNAL_EPHY_ID, 0xfffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, rockchip_phy_tbl); + +MODULE_AUTHOR("David Wu "); +MODULE_DESCRIPTION("Rockchip Ethernet PHY driver"); +MODULE_LICENSE("GPL"); -- cgit v1.3.1