From 3a2c4d55e32ad65efebdb6de44eef3bfa08bb49d Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 2 Sep 2026 15:31:14 -0700 Subject: treewide: refresh kmalloc_obj() conversions This is another run of the Coccinelle script for converting kmalloc() family of allocations to kmalloc_obj() via the existing rules in scripts/coccinelle/api/kmalloc_objs.cocci This catches both the set of kmalloc() uses added since the first kmalloc_obj() conversions in v7.0 and adds a large group missed in the first pass due to Coccinelle not interacting well with the cleanup.h scoped_...() family of macros[1]. I worked around this with spatch's "--macro-file" argument to a file with all the scoped_...() macros mapped to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control flow indicator I could find. Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc, riscv, and s390 with no new warnings. Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1] Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2] Signed-off-by: Kees Cook --- drivers/net/phy/qt2025.rs | 110 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 drivers/net/phy/qt2025.rs (limited to 'drivers/net/phy/qt2025.rs') diff --git a/drivers/net/phy/qt2025.rs b/drivers/net/phy/qt2025.rs new file mode 100644 index 000000000..470d89a0a --- /dev/null +++ b/drivers/net/phy/qt2025.rs @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) Tehuti Networks Ltd. +// Copyright (C) 2024 FUJITA Tomonori + +//! Applied Micro Circuits Corporation QT2025 PHY driver +//! +//! This driver is based on the vendor driver `QT2025_phy.c`. This source +//! and firmware can be downloaded on the EN-9320SFP+ support site. +//! +//! The QT2025 PHY integrates an Intel 8051 micro-controller. + +use kernel::error::code; +use kernel::firmware::Firmware; +use kernel::io::poll::read_poll_timeout; +use kernel::net::phy::{ + self, + reg::{Mmd, C45}, + Driver, +}; +use kernel::prelude::*; +use kernel::sizes::{SZ_16K, SZ_8K}; +use kernel::time::Delta; + +kernel::module_phy_driver! { + drivers: [PhyQT2025], + device_table: [ + phy::DeviceId::new_with_driver::(), + ], + name: "qt2025_phy", + authors: ["FUJITA Tomonori "], + description: "AMCC QT2025 PHY driver", + license: "GPL", + firmware: ["qt2025-2.0.3.3.fw"], +} + +struct PhyQT2025; + +#[vtable] +impl Driver for PhyQT2025 { + const NAME: &'static CStr = c"QT2025 10Gpbs SFP+"; + const PHY_DEVICE_ID: phy::DeviceId = phy::DeviceId::new_with_exact_mask(0x0043a400); + + fn probe(dev: &mut phy::Device) -> Result<()> { + // Check the hardware revision code. + // Only 0xb3 works with this driver and firmware. + let hw_rev = dev.read(C45::new(Mmd::PMAPMD, 0xd001))?; + if (hw_rev >> 8) != 0xb3 { + return Err(code::ENODEV); + } + + // `MICRO_RESETN`: hold the micro-controller in reset while configuring. + dev.write(C45::new(Mmd::PMAPMD, 0xc300), 0x0000)?; + // `SREFCLK_FREQ`: configure clock frequency of the micro-controller. + dev.write(C45::new(Mmd::PMAPMD, 0xc302), 0x0004)?; + // Non loopback mode. + dev.write(C45::new(Mmd::PMAPMD, 0xc319), 0x0038)?; + // `CUS_LAN_WAN_CONFIG`: select between LAN and WAN (WIS) mode. + dev.write(C45::new(Mmd::PMAPMD, 0xc31a), 0x0098)?; + // The following writes use standardized registers (3.38 through + // 3.41 5/10/25GBASE-R PCS test pattern seed B) for something else. + // We don't know what. + dev.write(C45::new(Mmd::PCS, 0x0026), 0x0e00)?; + dev.write(C45::new(Mmd::PCS, 0x0027), 0x0893)?; + dev.write(C45::new(Mmd::PCS, 0x0028), 0xa528)?; + dev.write(C45::new(Mmd::PCS, 0x0029), 0x0003)?; + // Configure transmit and recovered clock. + dev.write(C45::new(Mmd::PMAPMD, 0xa30a), 0x06e1)?; + // `MICRO_RESETN`: release the micro-controller from the reset state. + dev.write(C45::new(Mmd::PMAPMD, 0xc300), 0x0002)?; + // The micro-controller will start running from the boot ROM. + dev.write(C45::new(Mmd::PCS, 0xe854), 0x00c0)?; + + let fw = Firmware::request(c"qt2025-2.0.3.3.fw", dev.as_ref())?; + if fw.data().len() > SZ_16K + SZ_8K { + return Err(code::EFBIG); + } + + // The 24kB of program memory space is accessible by MDIO. + // The first 16kB of memory is located in the address range 3.8000h - 3.BFFFh. + // The next 8kB of memory is located at 4.8000h - 4.9FFFh. + let mut dst_offset = 0; + let mut dst_mmd = Mmd::PCS; + for (src_idx, val) in fw.data().iter().enumerate() { + if src_idx == SZ_16K { + // Start writing to the next register with no offset + dst_offset = 0; + dst_mmd = Mmd::PHYXS; + } + + dev.write(C45::new(dst_mmd, 0x8000 + dst_offset), (*val).into())?; + + dst_offset += 1; + } + // The micro-controller will start running from SRAM. + dev.write(C45::new(Mmd::PCS, 0xe854), 0x0040)?; + + read_poll_timeout( + || dev.read(C45::new(Mmd::PCS, 0xd7fd)), + |val| *val != 0x00 && *val != 0x10, + Delta::from_millis(50), + Delta::from_secs(3), + )?; + + Ok(()) + } + + fn read_status(dev: &mut phy::Device) -> Result { + dev.genphy_read_status::() + } +} -- cgit v1.3.1