From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/mtd/maps/solutionengine.c | 95 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100644 drivers/mtd/maps/solutionengine.c (limited to 'drivers/mtd/maps/solutionengine.c') diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c new file mode 100644 index 000000000..c07f21b20 --- /dev/null +++ b/drivers/mtd/maps/solutionengine.c @@ -0,0 +1,95 @@ +/* + * Flash and EPROM on Hitachi Solution Engine and similar boards. + * + * (C) 2001 Red Hat, Inc. + * + * GPL'd + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct mtd_info *flash_mtd; +static struct mtd_info *eprom_mtd; + +struct map_info soleng_eprom_map = { + .name = "Solution Engine EPROM", + .size = 0x400000, + .bankwidth = 4, +}; + +struct map_info soleng_flash_map = { + .name = "Solution Engine FLASH", + .size = 0x400000, + .bankwidth = 4, +}; + +static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL }; + +static int __init init_soleng_maps(void) +{ + /* First probe at offset 0 */ + soleng_flash_map.phys = 0; + soleng_flash_map.virt = (void __iomem *)P2SEGADDR(0); + soleng_eprom_map.phys = 0x01000000; + soleng_eprom_map.virt = (void __iomem *)P1SEGADDR(0x01000000); + simple_map_init(&soleng_eprom_map); + simple_map_init(&soleng_flash_map); + + printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n"); + flash_mtd = do_map_probe("cfi_probe", &soleng_flash_map); + if (!flash_mtd) { + /* Not there. Try swapping */ + printk(KERN_NOTICE "Probing for flash chips at 0x01000000:\n"); + soleng_flash_map.phys = 0x01000000; + soleng_flash_map.virt = P2SEGADDR(0x01000000); + soleng_eprom_map.phys = 0; + soleng_eprom_map.virt = P1SEGADDR(0); + flash_mtd = do_map_probe("cfi_probe", &soleng_flash_map); + if (!flash_mtd) { + /* Eep. */ + printk(KERN_NOTICE "Flash chips not detected at either possible location.\n"); + return -ENXIO; + } + } + printk(KERN_NOTICE "Solution Engine: Flash at 0x%pap, EPROM at 0x%pap\n", + &soleng_flash_map.phys, + &soleng_eprom_map.phys); + flash_mtd->owner = THIS_MODULE; + + eprom_mtd = do_map_probe("map_rom", &soleng_eprom_map); + if (eprom_mtd) { + eprom_mtd->owner = THIS_MODULE; + mtd_device_register(eprom_mtd, NULL, 0); + } + + mtd_device_parse_register(flash_mtd, probes, NULL, NULL, 0); + + return 0; +} + +static void __exit cleanup_soleng_maps(void) +{ + if (eprom_mtd) { + mtd_device_unregister(eprom_mtd); + map_destroy(eprom_mtd); + } + + mtd_device_unregister(flash_mtd); + map_destroy(flash_mtd); +} + +module_init(init_soleng_maps); +module_exit(cleanup_soleng_maps); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse "); +MODULE_DESCRIPTION("MTD map driver for Hitachi SolutionEngine (and similar) boards"); + -- cgit v1.3.1