From 684b413b5483f57c890c171b9400076a0143b918 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Fri, 18 Sep 2026 16:06:42 +0200 Subject: virtio_blk: set the zone write granularity virtblk_read_zoned_limits() reads the write granularity that the device reports in virtio_blk_zoned_characteristics and assigns it to the physical block size and to io_min, but never to the limit that is named after it. queue_limits.zone_write_granularity is left at zero, so blk_validate_zoned_limits() raises it to the logical block size: if (lim->zone_write_granularity < lim->logical_block_size) lim->zone_write_granularity = lim->logical_block_size; A device that reports a granularity coarser than its logical block size, which is what the field exists to express, therefore has it silently reduced. A 512e host managed disk passed through to a guest reports a logical block size of 512 and a write granularity of 4096, and the guest ends up with a zone write granularity of 512. bio_split_alignment() returns lim->zone_write_granularity if it is non-zero and bio_split_io_at() may split a bio with as per bio_split_alignment(). This can real to the write getting rejected by the host drive, as the write is not aligned to the physical block size. zonefs also takes its block size from bdev_zone_write_granularity(), so it would incorrectly use 512 on a disk that requires 4096. sd_zbc_read_zones() sets the limit from the physical block size for the same reason. NVMe ZNS and null_blk leave it unset, but the fallback gives the right answer for them, as their write granularity is the logical block size. virtio carries a separate value that may exceed it. Set the zone write granularity from the value that the device reports. Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices") Signed-off-by: Niklas Cassel Reviewed-by: Stefan Hajnoczi Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org Signed-off-by: Jens Axboe --- drivers/mtd/maps/physmap-versatile.c | 242 +++++++++++++++++++++++++++++++++++ 1 file changed, 242 insertions(+) create mode 100644 drivers/mtd/maps/physmap-versatile.c (limited to 'drivers/mtd/maps/physmap-versatile.c') diff --git a/drivers/mtd/maps/physmap-versatile.c b/drivers/mtd/maps/physmap-versatile.c new file mode 100644 index 000000000..2e779111b --- /dev/null +++ b/drivers/mtd/maps/physmap-versatile.c @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Versatile OF physmap driver add-on + * + * Copyright (c) 2016, Linaro Limited + * Author: Linus Walleij + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "physmap-versatile.h" + +static struct regmap *syscon_regmap; + +enum versatile_flashprot { + INTEGRATOR_AP_FLASHPROT, + INTEGRATOR_CP_FLASHPROT, + VERSATILE_FLASHPROT, + REALVIEW_FLASHPROT, +}; + +static const struct of_device_id syscon_match[] = { + { + .compatible = "arm,integrator-ap-syscon", + .data = (void *)INTEGRATOR_AP_FLASHPROT, + }, + { + .compatible = "arm,integrator-cp-syscon", + .data = (void *)INTEGRATOR_CP_FLASHPROT, + }, + { + .compatible = "arm,core-module-versatile", + .data = (void *)VERSATILE_FLASHPROT, + }, + { + .compatible = "arm,realview-eb-syscon", + .data = (void *)REALVIEW_FLASHPROT, + }, + { + .compatible = "arm,realview-pb1176-syscon", + .data = (void *)REALVIEW_FLASHPROT, + }, + { + .compatible = "arm,realview-pb11mp-syscon", + .data = (void *)REALVIEW_FLASHPROT, + }, + { + .compatible = "arm,realview-pba8-syscon", + .data = (void *)REALVIEW_FLASHPROT, + }, + { + .compatible = "arm,realview-pbx-syscon", + .data = (void *)REALVIEW_FLASHPROT, + }, + {}, +}; + +/* + * Flash protection handling for the Integrator/AP + */ +#define INTEGRATOR_SC_CTRLS_OFFSET 0x08 +#define INTEGRATOR_SC_CTRLC_OFFSET 0x0C +#define INTEGRATOR_SC_CTRL_FLVPPEN BIT(1) +#define INTEGRATOR_SC_CTRL_FLWP BIT(2) + +#define INTEGRATOR_EBI_CSR1_OFFSET 0x04 +/* The manual says bit 2, the code says bit 3, trust the code */ +#define INTEGRATOR_EBI_WRITE_ENABLE BIT(3) +#define INTEGRATOR_EBI_LOCK_OFFSET 0x20 +#define INTEGRATOR_EBI_LOCK_VAL 0xA05F + +static const struct of_device_id ebi_match[] = { + { .compatible = "arm,external-bus-interface"}, + { }, +}; + +static int ap_flash_init(struct platform_device *pdev) +{ + struct device_node *ebi; + void __iomem *ebi_base; + u32 val; + int ret; + + /* Look up the EBI */ + ebi = of_find_matching_node(NULL, ebi_match); + if (!ebi) { + return -ENODEV; + } + ebi_base = of_iomap(ebi, 0); + of_node_put(ebi); + if (!ebi_base) + return -ENODEV; + + /* Clear VPP and write protection bits */ + ret = regmap_write(syscon_regmap, + INTEGRATOR_SC_CTRLC_OFFSET, + INTEGRATOR_SC_CTRL_FLVPPEN | INTEGRATOR_SC_CTRL_FLWP); + if (ret) + dev_err(&pdev->dev, "error clearing Integrator VPP/WP\n"); + + /* Unlock the EBI */ + writel(INTEGRATOR_EBI_LOCK_VAL, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); + + /* Enable write cycles on the EBI, CSR1 (flash) */ + val = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); + val |= INTEGRATOR_EBI_WRITE_ENABLE; + writel(val, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); + + /* Lock the EBI again */ + writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); + iounmap(ebi_base); + + return 0; +} + +static void ap_flash_set_vpp(struct map_info *map, int on) +{ + int ret; + + if (on) { + ret = regmap_write(syscon_regmap, + INTEGRATOR_SC_CTRLS_OFFSET, + INTEGRATOR_SC_CTRL_FLVPPEN | INTEGRATOR_SC_CTRL_FLWP); + if (ret) + pr_err("error enabling AP VPP\n"); + } else { + ret = regmap_write(syscon_regmap, + INTEGRATOR_SC_CTRLC_OFFSET, + INTEGRATOR_SC_CTRL_FLVPPEN | INTEGRATOR_SC_CTRL_FLWP); + if (ret) + pr_err("error disabling AP VPP\n"); + } +} + +/* + * Flash protection handling for the Integrator/CP + */ + +#define INTCP_FLASHPROG_OFFSET 0x04 +#define CINTEGRATOR_FLVPPEN BIT(0) +#define CINTEGRATOR_FLWREN BIT(1) +#define CINTEGRATOR_FLMASK BIT(0)|BIT(1) + +static void cp_flash_set_vpp(struct map_info *map, int on) +{ + int ret; + + if (on) { + ret = regmap_update_bits(syscon_regmap, + INTCP_FLASHPROG_OFFSET, + CINTEGRATOR_FLMASK, + CINTEGRATOR_FLVPPEN | CINTEGRATOR_FLWREN); + if (ret) + pr_err("error setting CP VPP\n"); + } else { + ret = regmap_update_bits(syscon_regmap, + INTCP_FLASHPROG_OFFSET, + CINTEGRATOR_FLMASK, + 0); + if (ret) + pr_err("error setting CP VPP\n"); + } +} + +/* + * Flash protection handling for the Versatiles and RealViews + */ + +#define VERSATILE_SYS_FLASH_OFFSET 0x4C + +static void versatile_flash_set_vpp(struct map_info *map, int on) +{ + int ret; + + ret = regmap_update_bits(syscon_regmap, VERSATILE_SYS_FLASH_OFFSET, + 0x01, !!on); + if (ret) + pr_err("error setting Versatile VPP\n"); +} + +int of_flash_probe_versatile(struct platform_device *pdev, + struct device_node *np, + struct map_info *map) +{ + struct device_node *sysnp; + const struct of_device_id *devid; + struct regmap *rmap; + static enum versatile_flashprot versatile_flashprot; + int ret; + + /* Not all flash chips use this protection line */ + if (!of_device_is_compatible(np, "arm,versatile-flash")) + return 0; + + /* For first chip probed, look up the syscon regmap */ + if (!syscon_regmap) { + sysnp = of_find_matching_node_and_match(NULL, + syscon_match, + &devid); + if (!sysnp) + return -ENODEV; + + versatile_flashprot = (uintptr_t)devid->data; + rmap = syscon_node_to_regmap(sysnp); + of_node_put(sysnp); + if (IS_ERR(rmap)) + return PTR_ERR(rmap); + + syscon_regmap = rmap; + } + + switch (versatile_flashprot) { + case INTEGRATOR_AP_FLASHPROT: + ret = ap_flash_init(pdev); + if (ret) + return ret; + map->set_vpp = ap_flash_set_vpp; + dev_info(&pdev->dev, "Integrator/AP flash protection\n"); + break; + case INTEGRATOR_CP_FLASHPROT: + map->set_vpp = cp_flash_set_vpp; + dev_info(&pdev->dev, "Integrator/CP flash protection\n"); + break; + case VERSATILE_FLASHPROT: + case REALVIEW_FLASHPROT: + map->set_vpp = versatile_flash_set_vpp; + dev_info(&pdev->dev, "versatile/realview flash protection\n"); + break; + default: + dev_info(&pdev->dev, "device marked as Versatile flash " + "but no system controller was found\n"); + break; + } + + return 0; +} -- cgit v1.3.1