From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- drivers/mfd/viperboard.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 drivers/mfd/viperboard.c (limited to 'drivers/mfd/viperboard.c') diff --git a/drivers/mfd/viperboard.c b/drivers/mfd/viperboard.c new file mode 100644 index 000000000..888737b8e --- /dev/null +++ b/drivers/mfd/viperboard.c @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Nano River Technologies viperboard driver + * + * This is the core driver for the viperboard. There are cell drivers + * available for I2C, ADC and both GPIOs. SPI is not yet supported. + * The drivers do not support all features the board exposes. See user + * manual of the viperboard. + * + * (C) 2012 by Lemonage GmbH + * Author: Lars Poeschel + * All rights reserved. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + + +static const struct usb_device_id vprbrd_table[] = { + { USB_DEVICE(0x2058, 0x1005) }, /* Nano River Technologies */ + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, vprbrd_table); + +static const struct mfd_cell vprbrd_devs[] = { + { + .name = "viperboard-gpio", + }, + { + .name = "viperboard-i2c", + }, + { + .name = "viperboard-adc", + }, +}; + +static int vprbrd_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct vprbrd *vb; + + u16 version = 0; + int pipe, ret; + + /* allocate memory for our device state and initialize it */ + vb = kzalloc_obj(*vb); + if (!vb) + return -ENOMEM; + + mutex_init(&vb->lock); + + vb->usb_dev = interface_to_usbdev(interface); + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, vb); + dev_set_drvdata(&vb->pdev.dev, vb); + + /* get version information, major first, minor then */ + pipe = usb_rcvctrlpipe(vb->usb_dev, 0); + ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MAJOR, + VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, vb->buf, 1, + VPRBRD_USB_TIMEOUT_MS); + if (ret == 1) + version = vb->buf[0]; + + ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MINOR, + VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, vb->buf, 1, + VPRBRD_USB_TIMEOUT_MS); + if (ret == 1) { + version <<= 8; + version = version | vb->buf[0]; + } + + dev_info(&interface->dev, + "version %x.%02x found at bus %03d address %03d\n", + version >> 8, version & 0xff, + vb->usb_dev->bus->busnum, vb->usb_dev->devnum); + + ret = mfd_add_hotplug_devices(&interface->dev, vprbrd_devs, + ARRAY_SIZE(vprbrd_devs)); + if (ret != 0) { + dev_err(&interface->dev, "Failed to add mfd devices to core."); + goto error; + } + + return 0; + +error: + if (vb) + kfree(vb); + + return ret; +} + +static void vprbrd_disconnect(struct usb_interface *interface) +{ + struct vprbrd *vb = usb_get_intfdata(interface); + + mfd_remove_devices(&interface->dev); + usb_set_intfdata(interface, NULL); + kfree(vb); + + dev_dbg(&interface->dev, "disconnected\n"); +} + +static struct usb_driver vprbrd_driver = { + .name = "viperboard", + .probe = vprbrd_probe, + .disconnect = vprbrd_disconnect, + .id_table = vprbrd_table, +}; + +module_usb_driver(vprbrd_driver); + +MODULE_DESCRIPTION("Nano River Technologies viperboard mfd core driver"); +MODULE_AUTHOR("Lars Poeschel "); +MODULE_LICENSE("GPL"); -- cgit v1.3.1