From 93de2a6a4b91b72607136dd656edf03fb399d27f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 23 Sep 2026 09:37:21 -0700 Subject: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical. Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration") Cc: stable@vger.kernel.org Reported-by: Stefan Teodorescu Signed-off-by: Sean Christopherson Message-ID: <20260923163721.1584779-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- drivers/mfd/viperboard.c | 126 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) create mode 100644 drivers/mfd/viperboard.c (limited to 'drivers/mfd/viperboard.c') diff --git a/drivers/mfd/viperboard.c b/drivers/mfd/viperboard.c new file mode 100644 index 000000000..36be8e69f --- /dev/null +++ b/drivers/mfd/viperboard.c @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Nano River Technologies viperboard driver + * + * This is the core driver for the viperboard. There are cell drivers + * available for I2C, ADC and both GPIOs. SPI is not yet supported. + * The drivers do not support all features the board exposes. See user + * manual of the viperboard. + * + * (C) 2012 by Lemonage GmbH + * Author: Lars Poeschel + * All rights reserved. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + + +static const struct usb_device_id vprbrd_table[] = { + { USB_DEVICE(0x2058, 0x1005) }, /* Nano River Technologies */ + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, vprbrd_table); + +static const struct mfd_cell vprbrd_devs[] = { + { + .name = "viperboard-gpio", + }, + { + .name = "viperboard-i2c", + }, + { + .name = "viperboard-adc", + }, +}; + +static int vprbrd_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct vprbrd *vb; + + u16 version = 0; + int pipe, ret; + + /* allocate memory for our device state and initialize it */ + vb = kzalloc_obj(*vb); + if (!vb) + return -ENOMEM; + + mutex_init(&vb->lock); + + vb->usb_dev = interface_to_usbdev(interface); + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, vb); + dev_set_drvdata(&vb->pdev.dev, vb); + + /* get version information, major first, minor then */ + pipe = usb_rcvctrlpipe(vb->usb_dev, 0); + ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MAJOR, + VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, vb->buf, 1, + VPRBRD_USB_TIMEOUT_MS); + if (ret == 1) + version = vb->buf[0]; + + ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MINOR, + VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, vb->buf, 1, + VPRBRD_USB_TIMEOUT_MS); + if (ret == 1) { + version <<= 8; + version = version | vb->buf[0]; + } + + dev_info(&interface->dev, + "version %x.%02x found at bus %03d address %03d\n", + version >> 8, version & 0xff, + vb->usb_dev->bus->busnum, vb->usb_dev->devnum); + + ret = mfd_add_hotplug_devices(&interface->dev, vprbrd_devs, + ARRAY_SIZE(vprbrd_devs)); + if (ret != 0) { + dev_err(&interface->dev, "Failed to add mfd devices to core."); + goto error; + } + + return 0; + +error: + kfree(vb); + + return ret; +} + +static void vprbrd_disconnect(struct usb_interface *interface) +{ + struct vprbrd *vb = usb_get_intfdata(interface); + + mfd_remove_devices(&interface->dev); + usb_set_intfdata(interface, NULL); + kfree(vb); + + dev_dbg(&interface->dev, "disconnected\n"); +} + +static struct usb_driver vprbrd_driver = { + .name = "viperboard", + .probe = vprbrd_probe, + .disconnect = vprbrd_disconnect, + .id_table = vprbrd_table, +}; + +module_usb_driver(vprbrd_driver); + +MODULE_DESCRIPTION("Nano River Technologies viperboard mfd core driver"); +MODULE_AUTHOR("Lars Poeschel "); +MODULE_LICENSE("GPL"); -- cgit v1.3.1