From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- drivers/mfd/max7360.c | 170 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 170 insertions(+) create mode 100644 drivers/mfd/max7360.c (limited to 'drivers/mfd/max7360.c') diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c new file mode 100644 index 000000000..52fffed0c --- /dev/null +++ b/drivers/mfd/max7360.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Maxim MAX7360 Core Driver + * + * Copyright 2025 Bootlin + * + * Authors: + * Kamel Bouhara + * Mathieu Dubois-Briand + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct mfd_cell max7360_cells[] = { + { .name = "max7360-pinctrl" }, + { .name = "max7360-pwm" }, + { .name = "max7360-keypad" }, + { .name = "max7360-rotary" }, + { + .name = "max7360-gpo", + .of_compatible = "maxim,max7360-gpo", + }, + { + .name = "max7360-gpio", + .of_compatible = "maxim,max7360-gpio", + }, +}; + +static const struct regmap_range max7360_volatile_ranges[] = { + regmap_reg_range(MAX7360_REG_KEYFIFO, MAX7360_REG_KEYFIFO), + regmap_reg_range(MAX7360_REG_I2C_TIMEOUT, MAX7360_REG_RTR_CNT), +}; + +static const struct regmap_access_table max7360_volatile_table = { + .yes_ranges = max7360_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges), +}; + +static const struct regmap_config max7360_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX7360_REG_PWMCFG(MAX7360_PORT_PWM_COUNT - 1), + .volatile_table = &max7360_volatile_table, + .cache_type = REGCACHE_MAPLE, +}; + +static int max7360_mask_irqs(struct regmap *regmap) +{ + struct device *dev = regmap_get_device(regmap); + unsigned int val; + int ret; + + /* + * GPIO/PWM interrupts are not masked on reset: as the MAX7360 "INTI" + * interrupt line is shared between GPIOs and rotary encoder, this could + * result in repeated spurious interrupts on the rotary encoder driver + * if the GPIO driver is not loaded. Mask them now to avoid this + * situation. + */ + for (unsigned int i = 0; i < MAX7360_PORT_PWM_COUNT; i++) { + ret = regmap_write_bits(regmap, MAX7360_REG_PWMCFG(i), + MAX7360_PORT_CFG_INTERRUPT_MASK, + MAX7360_PORT_CFG_INTERRUPT_MASK); + if (ret) + return dev_err_probe(dev, ret, + "Failed to write MAX7360 port configuration\n"); + } + + /* Read GPIO in register, to ACK any pending IRQ. */ + ret = regmap_read(regmap, MAX7360_REG_GPIOIN, &val); + if (ret) + return dev_err_probe(dev, ret, "Failed to read GPIO values\n"); + + return 0; +} + +static int max7360_reset(struct regmap *regmap) +{ + struct device *dev = regmap_get_device(regmap); + int ret; + + ret = regmap_write(regmap, MAX7360_REG_GPIOCFG, MAX7360_GPIO_CFG_GPIO_RST); + if (ret) { + dev_err(dev, "Failed to reset GPIO configuration: %x\n", ret); + return ret; + } + + ret = regcache_drop_region(regmap, MAX7360_REG_GPIOCFG, MAX7360_REG_GPIO_LAST); + if (ret) { + dev_err(dev, "Failed to drop regmap cache: %x\n", ret); + return ret; + } + + ret = regmap_write(regmap, MAX7360_REG_SLEEP, 0); + if (ret) { + dev_err(dev, "Failed to reset autosleep configuration: %x\n", ret); + return ret; + } + + ret = regmap_write(regmap, MAX7360_REG_DEBOUNCE, 0); + if (ret) + dev_err(dev, "Failed to reset GPO port count: %x\n", ret); + + return ret; +} + +static int max7360_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct regmap *regmap; + int ret; + + regmap = devm_regmap_init_i2c(client, &max7360_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialise regmap\n"); + + ret = max7360_reset(regmap); + if (ret) + return dev_err_probe(dev, ret, "Failed to reset device\n"); + + /* Get the device out of shutdown mode. */ + ret = regmap_write_bits(regmap, MAX7360_REG_GPIOCFG, + MAX7360_GPIO_CFG_GPIO_EN, + MAX7360_GPIO_CFG_GPIO_EN); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable GPIO and PWM module\n"); + + ret = max7360_mask_irqs(regmap); + if (ret) + return dev_err_probe(dev, ret, "Could not mask interrupts\n"); + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + max7360_cells, ARRAY_SIZE(max7360_cells), + NULL, 0, NULL); + if (ret) + return dev_err_probe(dev, ret, "Failed to register child devices\n"); + + return 0; +} + +static const struct of_device_id max7360_dt_match[] = { + { .compatible = "maxim,max7360" }, + {} +}; +MODULE_DEVICE_TABLE(of, max7360_dt_match); + +static struct i2c_driver max7360_driver = { + .driver = { + .name = "max7360", + .of_match_table = max7360_dt_match, + }, + .probe = max7360_probe, +}; +module_i2c_driver(max7360_driver); + +MODULE_DESCRIPTION("Maxim MAX7360 I2C IO Expander core driver"); +MODULE_AUTHOR("Kamel Bouhara "); +MODULE_LICENSE("GPL"); -- cgit v1.3.1