From 4352b8aee98005853aa63f57d6377282de17a33f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 23 Aug 2026 13:28:57 -0700 Subject: Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull I3C updates from Alexandre Belloni: "A new driver this cycle, for the AMD AXI I3C controller. There are also new features such as IBI wakeup support, SETAASA device discovery and ACPI support for the the DAA methods, meaning we can now communicate with the SPD devices on DDR5 modules. New driver: - AMD AXI I3C master controller Subsystem: - I3C Common Command Code (CCC) handling improvements, especially around GET CCCs - SETAASA device discovery support - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as well as I2C devices on I3C bus - IBI-based wakeup support Drivers: - dw: SETAASA support - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C controller support, PIO queue management support for HCI v1.2 - renesas: improve suspend to RAM support, add runtime PM support" * tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits) i3c: dw: reduce do_daa time if there's no client i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2 i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode i3c: dw: rename "pclk" to "apb" to match dt-binding i3c: dw: make struct dw_i3c_cmd smaller i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding i3c: renesas: Don't register devices when ENTDAA times out i3c: master: dw-i3c-master: fix OD timing for first broadcast i3c: mipi-i3c-hci: Advertise IBI wakeup capability i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev() i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI i3c: master: Reject IBI requests from non-IBI-capable devices i3c: master: Add helper to query bus wakeup requirements i3c: master: Report wakeup events for IBIs i3c: master: Support IBI-based wakeup capability i3c: master: Fix potential UAF in i3c_device_match() i3c: master: Fix potential UAF in i3c_device_uevent() i3c: Make dev->desc locking assumptions explicit i3c: master: Fix use-after-free of master->this ... --- drivers/mfd/max7360.c | 170 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 170 insertions(+) create mode 100644 drivers/mfd/max7360.c (limited to 'drivers/mfd/max7360.c') diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c new file mode 100644 index 000000000..52fffed0c --- /dev/null +++ b/drivers/mfd/max7360.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Maxim MAX7360 Core Driver + * + * Copyright 2025 Bootlin + * + * Authors: + * Kamel Bouhara + * Mathieu Dubois-Briand + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct mfd_cell max7360_cells[] = { + { .name = "max7360-pinctrl" }, + { .name = "max7360-pwm" }, + { .name = "max7360-keypad" }, + { .name = "max7360-rotary" }, + { + .name = "max7360-gpo", + .of_compatible = "maxim,max7360-gpo", + }, + { + .name = "max7360-gpio", + .of_compatible = "maxim,max7360-gpio", + }, +}; + +static const struct regmap_range max7360_volatile_ranges[] = { + regmap_reg_range(MAX7360_REG_KEYFIFO, MAX7360_REG_KEYFIFO), + regmap_reg_range(MAX7360_REG_I2C_TIMEOUT, MAX7360_REG_RTR_CNT), +}; + +static const struct regmap_access_table max7360_volatile_table = { + .yes_ranges = max7360_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges), +}; + +static const struct regmap_config max7360_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX7360_REG_PWMCFG(MAX7360_PORT_PWM_COUNT - 1), + .volatile_table = &max7360_volatile_table, + .cache_type = REGCACHE_MAPLE, +}; + +static int max7360_mask_irqs(struct regmap *regmap) +{ + struct device *dev = regmap_get_device(regmap); + unsigned int val; + int ret; + + /* + * GPIO/PWM interrupts are not masked on reset: as the MAX7360 "INTI" + * interrupt line is shared between GPIOs and rotary encoder, this could + * result in repeated spurious interrupts on the rotary encoder driver + * if the GPIO driver is not loaded. Mask them now to avoid this + * situation. + */ + for (unsigned int i = 0; i < MAX7360_PORT_PWM_COUNT; i++) { + ret = regmap_write_bits(regmap, MAX7360_REG_PWMCFG(i), + MAX7360_PORT_CFG_INTERRUPT_MASK, + MAX7360_PORT_CFG_INTERRUPT_MASK); + if (ret) + return dev_err_probe(dev, ret, + "Failed to write MAX7360 port configuration\n"); + } + + /* Read GPIO in register, to ACK any pending IRQ. */ + ret = regmap_read(regmap, MAX7360_REG_GPIOIN, &val); + if (ret) + return dev_err_probe(dev, ret, "Failed to read GPIO values\n"); + + return 0; +} + +static int max7360_reset(struct regmap *regmap) +{ + struct device *dev = regmap_get_device(regmap); + int ret; + + ret = regmap_write(regmap, MAX7360_REG_GPIOCFG, MAX7360_GPIO_CFG_GPIO_RST); + if (ret) { + dev_err(dev, "Failed to reset GPIO configuration: %x\n", ret); + return ret; + } + + ret = regcache_drop_region(regmap, MAX7360_REG_GPIOCFG, MAX7360_REG_GPIO_LAST); + if (ret) { + dev_err(dev, "Failed to drop regmap cache: %x\n", ret); + return ret; + } + + ret = regmap_write(regmap, MAX7360_REG_SLEEP, 0); + if (ret) { + dev_err(dev, "Failed to reset autosleep configuration: %x\n", ret); + return ret; + } + + ret = regmap_write(regmap, MAX7360_REG_DEBOUNCE, 0); + if (ret) + dev_err(dev, "Failed to reset GPO port count: %x\n", ret); + + return ret; +} + +static int max7360_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct regmap *regmap; + int ret; + + regmap = devm_regmap_init_i2c(client, &max7360_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialise regmap\n"); + + ret = max7360_reset(regmap); + if (ret) + return dev_err_probe(dev, ret, "Failed to reset device\n"); + + /* Get the device out of shutdown mode. */ + ret = regmap_write_bits(regmap, MAX7360_REG_GPIOCFG, + MAX7360_GPIO_CFG_GPIO_EN, + MAX7360_GPIO_CFG_GPIO_EN); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable GPIO and PWM module\n"); + + ret = max7360_mask_irqs(regmap); + if (ret) + return dev_err_probe(dev, ret, "Could not mask interrupts\n"); + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + max7360_cells, ARRAY_SIZE(max7360_cells), + NULL, 0, NULL); + if (ret) + return dev_err_probe(dev, ret, "Failed to register child devices\n"); + + return 0; +} + +static const struct of_device_id max7360_dt_match[] = { + { .compatible = "maxim,max7360" }, + {} +}; +MODULE_DEVICE_TABLE(of, max7360_dt_match); + +static struct i2c_driver max7360_driver = { + .driver = { + .name = "max7360", + .of_match_table = max7360_dt_match, + }, + .probe = max7360_probe, +}; +module_i2c_driver(max7360_driver); + +MODULE_DESCRIPTION("Maxim MAX7360 I2C IO Expander core driver"); +MODULE_AUTHOR("Kamel Bouhara "); +MODULE_LICENSE("GPL"); -- cgit v1.3.1