From 3a2c4d55e32ad65efebdb6de44eef3bfa08bb49d Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 2 Sep 2026 15:31:14 -0700 Subject: treewide: refresh kmalloc_obj() conversions This is another run of the Coccinelle script for converting kmalloc() family of allocations to kmalloc_obj() via the existing rules in scripts/coccinelle/api/kmalloc_objs.cocci This catches both the set of kmalloc() uses added since the first kmalloc_obj() conversions in v7.0 and adds a large group missed in the first pass due to Coccinelle not interacting well with the cleanup.h scoped_...() family of macros[1]. I worked around this with spatch's "--macro-file" argument to a file with all the scoped_...() macros mapped to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control flow indicator I could find. Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc, riscv, and s390 with no new warnings. Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1] Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2] Signed-off-by: Kees Cook --- drivers/media/dvb-frontends/gp8psk-fe.h | 73 +++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 drivers/media/dvb-frontends/gp8psk-fe.h (limited to 'drivers/media/dvb-frontends/gp8psk-fe.h') diff --git a/drivers/media/dvb-frontends/gp8psk-fe.h b/drivers/media/dvb-frontends/gp8psk-fe.h new file mode 100644 index 000000000..2805a3b67 --- /dev/null +++ b/drivers/media/dvb-frontends/gp8psk-fe.h @@ -0,0 +1,73 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * gp8psk_fe driver + */ + +#ifndef GP8PSK_FE_H +#define GP8PSK_FE_H + +#include + +/* gp8psk commands */ + +#define GET_8PSK_CONFIG 0x80 /* in */ +#define SET_8PSK_CONFIG 0x81 +#define I2C_WRITE 0x83 +#define I2C_READ 0x84 +#define ARM_TRANSFER 0x85 +#define TUNE_8PSK 0x86 +#define GET_SIGNAL_STRENGTH 0x87 /* in */ +#define LOAD_BCM4500 0x88 +#define BOOT_8PSK 0x89 /* in */ +#define START_INTERSIL 0x8A /* in */ +#define SET_LNB_VOLTAGE 0x8B +#define SET_22KHZ_TONE 0x8C +#define SEND_DISEQC_COMMAND 0x8D +#define SET_DVB_MODE 0x8E +#define SET_DN_SWITCH 0x8F +#define GET_SIGNAL_LOCK 0x90 /* in */ +#define GET_FW_VERS 0x92 +#define GET_SERIAL_NUMBER 0x93 /* in */ +#define USE_EXTRA_VOLT 0x94 +#define GET_FPGA_VERS 0x95 +#define CW3K_INIT 0x9d + +/* PSK_configuration bits */ +#define bm8pskStarted 0x01 +#define bm8pskFW_Loaded 0x02 +#define bmIntersilOn 0x04 +#define bmDVBmode 0x08 +#define bm22kHz 0x10 +#define bmSEL18V 0x20 +#define bmDCtuned 0x40 +#define bmArmed 0x80 + +/* Satellite modulation modes */ +#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ +#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ +#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ +#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ + +#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ +#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ +#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ +#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ +#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ +#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ + +/* firmware revision id's */ +#define GP8PSK_FW_REV1 0x020604 +#define GP8PSK_FW_REV2 0x020704 +#define GP8PSK_FW_VERS(_fw_vers) \ + ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0]) + +struct gp8psk_fe_ops { + int (*in)(void *priv, u8 req, u16 value, u16 index, u8 *b, int blen); + int (*out)(void *priv, u8 req, u16 value, u16 index, u8 *b, int blen); + int (*reload)(void *priv); +}; + +struct dvb_frontend *gp8psk_fe_attach(const struct gp8psk_fe_ops *ops, + void *priv, bool is_rev1); + +#endif -- cgit v1.3.1