From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- drivers/input/touchscreen/touchright.c | 174 +++++++++++++++++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 drivers/input/touchscreen/touchright.c (limited to 'drivers/input/touchscreen/touchright.c') diff --git a/drivers/input/touchscreen/touchright.c b/drivers/input/touchscreen/touchright.c new file mode 100644 index 000000000..d7fdf201e --- /dev/null +++ b/drivers/input/touchscreen/touchright.c @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Touchright serial touchscreen driver + * + * Copyright (c) 2006 Rick Koch + * + * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c) + * Copyright (c) 2004 Vojtech Pavlik + * and Dan Streetman + */ + + +#include +#include +#include +#include +#include +#include + +#define DRIVER_DESC "Touchright serial touchscreen driver" + +MODULE_AUTHOR("Rick Koch "); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define TR_FORMAT_TOUCH_BIT 0x01 +#define TR_FORMAT_STATUS_BYTE 0x40 +#define TR_FORMAT_STATUS_MASK ~TR_FORMAT_TOUCH_BIT + +#define TR_LENGTH 5 + +#define TR_MIN_XC 0 +#define TR_MAX_XC 0x1ff +#define TR_MIN_YC 0 +#define TR_MAX_YC 0x1ff + +/* + * Per-touchscreen data. + */ + +struct tr { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[TR_LENGTH]; + char phys[32]; +}; + +static irqreturn_t tr_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct tr *tr = serio_get_drvdata(serio); + struct input_dev *dev = tr->dev; + + tr->data[tr->idx] = data; + + if ((tr->data[0] & TR_FORMAT_STATUS_MASK) == TR_FORMAT_STATUS_BYTE) { + if (++tr->idx == TR_LENGTH) { + input_report_abs(dev, ABS_X, + (tr->data[1] << 5) | (tr->data[2] >> 1)); + input_report_abs(dev, ABS_Y, + (tr->data[3] << 5) | (tr->data[4] >> 1)); + input_report_key(dev, BTN_TOUCH, + tr->data[0] & TR_FORMAT_TOUCH_BIT); + input_sync(dev); + tr->idx = 0; + } + } + + return IRQ_HANDLED; +} + +/* + * tr_disconnect() is the opposite of tr_connect() + */ + +static void tr_disconnect(struct serio *serio) +{ + struct tr *tr = serio_get_drvdata(serio); + + input_get_device(tr->dev); + input_unregister_device(tr->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(tr->dev); + kfree(tr); +} + +/* + * tr_connect() is the routine that is called when someone adds a + * new serio device that supports the Touchright protocol and registers it as + * an input device. + */ + +static int tr_connect(struct serio *serio, struct serio_driver *drv) +{ + struct tr *tr; + struct input_dev *input_dev; + int err; + + tr = kzalloc_obj(*tr); + input_dev = input_allocate_device(); + if (!tr || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + tr->serio = serio; + tr->dev = input_dev; + scnprintf(tr->phys, sizeof(tr->phys), "%s/input0", serio->phys); + + input_dev->name = "Touchright Serial TouchScreen"; + input_dev->phys = tr->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_TOUCHRIGHT; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(tr->dev, ABS_X, TR_MIN_XC, TR_MAX_XC, 0, 0); + input_set_abs_params(tr->dev, ABS_Y, TR_MIN_YC, TR_MAX_YC, 0, 0); + + serio_set_drvdata(serio, tr); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(tr->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(tr); + return err; +} + +/* + * The serio driver structure. + */ + +static const struct serio_device_id tr_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_TOUCHRIGHT, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, tr_serio_ids); + +static struct serio_driver tr_drv = { + .driver = { + .name = "touchright", + }, + .description = DRIVER_DESC, + .id_table = tr_serio_ids, + .interrupt = tr_interrupt, + .connect = tr_connect, + .disconnect = tr_disconnect, +}; + +module_serio_driver(tr_drv); -- cgit v1.3.1