From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- drivers/input/touchscreen/penmount.c | 315 +++++++++++++++++++++++++++++++++++ 1 file changed, 315 insertions(+) create mode 100644 drivers/input/touchscreen/penmount.c (limited to 'drivers/input/touchscreen/penmount.c') diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c new file mode 100644 index 000000000..4b57b6664 --- /dev/null +++ b/drivers/input/touchscreen/penmount.c @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Penmount serial touchscreen driver + * + * Copyright (c) 2006 Rick Koch + * Copyright (c) 2011 John Sung + * + * Based on ELO driver (drivers/input/touchscreen/elo.c) + * Copyright (c) 2004 Vojtech Pavlik + */ + + +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_DESC "PenMount serial touchscreen driver" + +MODULE_AUTHOR("Rick Koch "); +MODULE_AUTHOR("John Sung "); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define PM_MAX_LENGTH 6 +#define PM_MAX_MTSLOT 16 +#define PM_3000_MTSLOT 2 +#define PM_6250_MTSLOT 12 + +/* + * Multi-touch slot + */ + +struct mt_slot { + unsigned short x, y; + bool active; /* is the touch valid? */ +}; + +/* + * Per-touchscreen data. + */ + +struct pm { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[PM_MAX_LENGTH]; + char phys[32]; + unsigned char packetsize; + unsigned char maxcontacts; + struct mt_slot slots[PM_MAX_MTSLOT]; + void (*parse_packet)(struct pm *); +}; + +/* + * pm_mtevent() sends mt events and also emulates pointer movement + */ + +static void pm_mtevent(struct pm *pm, struct input_dev *input) +{ + int i; + + for (i = 0; i < pm->maxcontacts; ++i) { + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, + pm->slots[i].active); + if (pm->slots[i].active) { + input_event(input, EV_ABS, ABS_MT_POSITION_X, pm->slots[i].x); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, pm->slots[i].y); + } + } + + input_mt_report_pointer_emulation(input, true); + input_sync(input); +} + +/* + * pm_checkpacket() checks if data packet is valid + */ + +static bool pm_checkpacket(unsigned char *packet) +{ + int total = 0; + int i; + + for (i = 0; i < 5; i++) + total += packet[i]; + + return packet[5] == (unsigned char)~(total & 0xff); +} + +static void pm_parse_9000(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0x80) && pm->packetsize == ++pm->idx) { + input_report_abs(dev, ABS_X, pm->data[1] * 128 + pm->data[2]); + input_report_abs(dev, ABS_Y, pm->data[3] * 128 + pm->data[4]); + input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40)); + input_sync(dev); + pm->idx = 0; + } +} + +static void pm_parse_6000(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0xbf) == 0x30 && pm->packetsize == ++pm->idx) { + if (pm_checkpacket(pm->data)) { + input_report_abs(dev, ABS_X, + pm->data[2] * 256 + pm->data[1]); + input_report_abs(dev, ABS_Y, + pm->data[4] * 256 + pm->data[3]); + input_report_key(dev, BTN_TOUCH, pm->data[0] & 0x40); + input_sync(dev); + } + pm->idx = 0; + } +} + +static void pm_parse_3000(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0xce) == 0x40 && pm->packetsize == ++pm->idx) { + if (pm_checkpacket(pm->data)) { + int slotnum = pm->data[0] & 0x0f; + pm->slots[slotnum].active = pm->data[0] & 0x30; + pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1]; + pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3]; + pm_mtevent(pm, dev); + } + pm->idx = 0; + } +} + +static void pm_parse_6250(struct pm *pm) +{ + struct input_dev *dev = pm->dev; + + if ((pm->data[0] & 0xb0) == 0x30 && pm->packetsize == ++pm->idx) { + if (pm_checkpacket(pm->data)) { + int slotnum = pm->data[0] & 0x0f; + pm->slots[slotnum].active = pm->data[0] & 0x40; + pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1]; + pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3]; + pm_mtevent(pm, dev); + } + pm->idx = 0; + } +} + +static irqreturn_t pm_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct pm *pm = serio_get_drvdata(serio); + + pm->data[pm->idx] = data; + + pm->parse_packet(pm); + + return IRQ_HANDLED; +} + +/* + * pm_disconnect() is the opposite of pm_connect() + */ + +static void pm_disconnect(struct serio *serio) +{ + struct pm *pm = serio_get_drvdata(serio); + + serio_close(serio); + + input_unregister_device(pm->dev); + kfree(pm); + + serio_set_drvdata(serio, NULL); +} + +/* + * pm_connect() is the routine that is called when someone adds a + * new serio device that supports PenMount protocol and registers it as + * an input device. + */ + +static int pm_connect(struct serio *serio, struct serio_driver *drv) +{ + struct pm *pm; + struct input_dev *input_dev; + int max_x, max_y; + int err; + + pm = kzalloc_obj(*pm); + input_dev = input_allocate_device(); + if (!pm || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + pm->serio = serio; + pm->dev = input_dev; + scnprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys); + pm->maxcontacts = 1; + + input_dev->name = "PenMount Serial TouchScreen"; + input_dev->phys = pm->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_PENMOUNT; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + switch (serio->id.id) { + default: + case 0: + pm->packetsize = 5; + pm->parse_packet = pm_parse_9000; + input_dev->id.product = 0x9000; + max_x = max_y = 0x3ff; + break; + + case 1: + pm->packetsize = 6; + pm->parse_packet = pm_parse_6000; + input_dev->id.product = 0x6000; + max_x = max_y = 0x3ff; + break; + + case 2: + pm->packetsize = 6; + pm->parse_packet = pm_parse_3000; + input_dev->id.product = 0x3000; + max_x = max_y = 0x7ff; + pm->maxcontacts = PM_3000_MTSLOT; + break; + + case 3: + pm->packetsize = 6; + pm->parse_packet = pm_parse_6250; + input_dev->id.product = 0x6250; + max_x = max_y = 0x3ff; + pm->maxcontacts = PM_6250_MTSLOT; + break; + } + + input_set_abs_params(pm->dev, ABS_X, 0, max_x, 0, 0); + input_set_abs_params(pm->dev, ABS_Y, 0, max_y, 0, 0); + + if (pm->maxcontacts > 1) { + input_mt_init_slots(pm->dev, pm->maxcontacts, 0); + input_set_abs_params(pm->dev, + ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(pm->dev, + ABS_MT_POSITION_Y, 0, max_y, 0, 0); + } + + serio_set_drvdata(serio, pm); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(pm->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(pm); + return err; +} + +/* + * The serio driver structure. + */ + +static const struct serio_device_id pm_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_PENMOUNT, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, pm_serio_ids); + +static struct serio_driver pm_drv = { + .driver = { + .name = "serio-penmount", + }, + .description = DRIVER_DESC, + .id_table = pm_serio_ids, + .interrupt = pm_interrupt, + .connect = pm_connect, + .disconnect = pm_disconnect, +}; + +module_serio_driver(pm_drv); -- cgit v1.3.1