From f146c7bc85a51f95c05e0f8173d484eb301ece78 Mon Sep 17 00:00:00 2001 From: Danilo Krummrich Date: Thu, 13 Aug 2026 18:52:04 +0200 Subject: PCI: Add pci_irq_type() to query the allocated interrupt type Add a helper that returns PCI_IRQ_MSIX, PCI_IRQ_MSI, or PCI_IRQ_INTX based on the interrupt type the PCI core selected after pci_alloc_irq_vectors(). Several drivers already open-code this check against pdev->msix_enabled and pdev->msi_enabled, or even open code this helper [1]. A common helper avoids the duplication and keeps drivers from accessing the bitfield directly (see also [2]). Acked-by: Bjorn Helgaas Tested-by: John Hubbard Link: https://elixir.bootlin.com/linux/v7.1/source/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c#L196 [1] Inspired-by: John Hubbard Link: https://lore.kernel.org/all/DKKG2QM3YJYB.Z2H2B2UXJ75N@kernel.org/ [2] Reviewed-by: Gary Guo Link: https://patch.msgid.link/20260813165234.620555-5-dakr@kernel.org [ Add missing pci_irq_type() stub for CONFIG_PCI=n. ] Signed-off-by: Danilo Krummrich --- drivers/input/touchscreen/gunze.c | 169 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 169 insertions(+) create mode 100644 drivers/input/touchscreen/gunze.c (limited to 'drivers/input/touchscreen/gunze.c') diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c new file mode 100644 index 000000000..2baeb4f3b --- /dev/null +++ b/drivers/input/touchscreen/gunze.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2000-2001 Vojtech Pavlik + */ + +/* + * Gunze AHL-51S touchscreen driver for Linux + */ + +#include +#include +#include +#include +#include +#include + +#define DRIVER_DESC "Gunze AHL-51S touchscreen driver" + +MODULE_AUTHOR("Vojtech Pavlik "); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define GUNZE_MAX_LENGTH 10 + +/* + * Per-touchscreen data. + */ + +struct gunze { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[GUNZE_MAX_LENGTH]; + char phys[32]; +}; + +static void gunze_process_packet(struct gunze *gunze) +{ + struct input_dev *dev = gunze->dev; + + if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' || + (gunze->data[0] != 'T' && gunze->data[0] != 'R')) { + printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data); + return; + } + + input_report_abs(dev, ABS_X, simple_strtoul(gunze->data + 1, NULL, 10)); + input_report_abs(dev, ABS_Y, 1024 - simple_strtoul(gunze->data + 6, NULL, 10)); + input_report_key(dev, BTN_TOUCH, gunze->data[0] == 'T'); + input_sync(dev); +} + +static irqreturn_t gunze_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct gunze *gunze = serio_get_drvdata(serio); + + if (data == '\r') { + gunze_process_packet(gunze); + gunze->idx = 0; + } else { + if (gunze->idx < GUNZE_MAX_LENGTH) + gunze->data[gunze->idx++] = data; + } + return IRQ_HANDLED; +} + +/* + * gunze_disconnect() is the opposite of gunze_connect() + */ + +static void gunze_disconnect(struct serio *serio) +{ + struct gunze *gunze = serio_get_drvdata(serio); + + input_get_device(gunze->dev); + input_unregister_device(gunze->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(gunze->dev); + kfree(gunze); +} + +/* + * gunze_connect() is the routine that is called when someone adds a + * new serio device that supports Gunze protocol and registers it as + * an input device. + */ + +static int gunze_connect(struct serio *serio, struct serio_driver *drv) +{ + struct gunze *gunze; + struct input_dev *input_dev; + int err; + + gunze = kzalloc_obj(*gunze); + input_dev = input_allocate_device(); + if (!gunze || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + gunze->serio = serio; + gunze->dev = input_dev; + scnprintf(gunze->phys, sizeof(serio->phys), "%s/input0", serio->phys); + + input_dev->name = "Gunze AHL-51S TouchScreen"; + input_dev->phys = gunze->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_GUNZE; + input_dev->id.product = 0x0051; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0); + + serio_set_drvdata(serio, gunze); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(gunze->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(gunze); + return err; +} + +/* + * The serio driver structure. + */ + +static const struct serio_device_id gunze_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_GUNZE, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, gunze_serio_ids); + +static struct serio_driver gunze_drv = { + .driver = { + .name = "gunze", + }, + .description = DRIVER_DESC, + .id_table = gunze_serio_ids, + .interrupt = gunze_interrupt, + .connect = gunze_connect, + .disconnect = gunze_disconnect, +}; + +module_serio_driver(gunze_drv); -- cgit v1.3.1