From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- drivers/input/serio/maceps2.c | 204 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 204 insertions(+) create mode 100644 drivers/input/serio/maceps2.c (limited to 'drivers/input/serio/maceps2.c') diff --git a/drivers/input/serio/maceps2.c b/drivers/input/serio/maceps2.c new file mode 100644 index 000000000..fb41e7f5a --- /dev/null +++ b/drivers/input/serio/maceps2.c @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * SGI O2 MACE PS2 controller driver for linux + * + * Copyright (C) 2002 Vivien Chappelier + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +MODULE_AUTHOR("Vivien Chappelier port_data)->port; + unsigned int timeout = MACE_PS2_TIMEOUT; + + do { + if (port->status & PS2_STATUS_TX_EMPTY) { + port->tx = val; + return 0; + } + udelay(50); + } while (timeout--); + + return -1; +} + +static irqreturn_t maceps2_interrupt(int irq, void *dev_id) +{ + struct serio *dev = dev_id; + struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port; + unsigned long byte; + + if (port->status & PS2_STATUS_RX_FULL) { + byte = port->rx; + serio_interrupt(dev, byte & 0xff, 0); + } + + return IRQ_HANDLED; +} + +static int maceps2_open(struct serio *dev) +{ + struct maceps2_data *data = (struct maceps2_data *)dev->port_data; + + if (request_irq(data->irq, maceps2_interrupt, 0, "PS2 port", dev)) { + printk(KERN_ERR "Could not allocate PS/2 IRQ\n"); + return -EBUSY; + } + + /* Reset port */ + data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET; + udelay(100); + + /* Enable interrupts */ + data->port->control = PS2_CONTROL_RX_CLOCK_ENABLE | + PS2_CONTROL_TX_ENABLE | + PS2_CONTROL_RX_INT_ENABLE; + + return 0; +} + +static void maceps2_close(struct serio *dev) +{ + struct maceps2_data *data = (struct maceps2_data *)dev->port_data; + + data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET; + udelay(100); + free_irq(data->irq, dev); +} + + +static struct serio *maceps2_allocate_port(int idx) +{ + struct serio *serio; + + serio = kzalloc_obj(*serio); + if (serio) { + serio->id.type = SERIO_8042; + serio->write = maceps2_write; + serio->open = maceps2_open; + serio->close = maceps2_close; + snprintf(serio->name, sizeof(serio->name), "MACE PS/2 port%d", idx); + snprintf(serio->phys, sizeof(serio->phys), "mace/serio%d", idx); + serio->port_data = &port_data[idx]; + serio->dev.parent = &maceps2_device->dev; + } + + return serio; +} + +static int maceps2_probe(struct platform_device *dev) +{ + maceps2_port[0] = maceps2_allocate_port(0); + maceps2_port[1] = maceps2_allocate_port(1); + if (!maceps2_port[0] || !maceps2_port[1]) { + kfree(maceps2_port[0]); + kfree(maceps2_port[1]); + return -ENOMEM; + } + + serio_register_port(maceps2_port[0]); + serio_register_port(maceps2_port[1]); + + return 0; +} + +static void maceps2_remove(struct platform_device *dev) +{ + serio_unregister_port(maceps2_port[0]); + serio_unregister_port(maceps2_port[1]); +} + +static struct platform_driver maceps2_driver = { + .driver = { + .name = "maceps2", + }, + .probe = maceps2_probe, + .remove = maceps2_remove, +}; + +static int __init maceps2_init(void) +{ + int error; + + error = platform_driver_register(&maceps2_driver); + if (error) + return error; + + maceps2_device = platform_device_alloc("maceps2", -1); + if (!maceps2_device) { + error = -ENOMEM; + goto err_unregister_driver; + } + + port_data[0].port = &mace->perif.ps2.keyb; + port_data[0].irq = MACEISA_KEYB_IRQ; + port_data[1].port = &mace->perif.ps2.mouse; + port_data[1].irq = MACEISA_MOUSE_IRQ; + + error = platform_device_add(maceps2_device); + if (error) + goto err_free_device; + + return 0; + + err_free_device: + platform_device_put(maceps2_device); + err_unregister_driver: + platform_driver_unregister(&maceps2_driver); + return error; +} + +static void __exit maceps2_exit(void) +{ + platform_device_unregister(maceps2_device); + platform_driver_unregister(&maceps2_driver); +} + +module_init(maceps2_init); +module_exit(maceps2_exit); -- cgit v1.3.1