From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/input/misc/88pm886-onkey.c | 98 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 drivers/input/misc/88pm886-onkey.c (limited to 'drivers/input/misc/88pm886-onkey.c') diff --git a/drivers/input/misc/88pm886-onkey.c b/drivers/input/misc/88pm886-onkey.c new file mode 100644 index 000000000..284ff5190 --- /dev/null +++ b/drivers/input/misc/88pm886-onkey.c @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include +#include +#include +#include +#include + +#include + +struct pm886_onkey { + struct input_dev *idev; + struct pm886_chip *chip; +}; + +static irqreturn_t pm886_onkey_irq_handler(int irq, void *data) +{ + struct pm886_onkey *onkey = data; + struct regmap *regmap = onkey->chip->regmap; + struct input_dev *idev = onkey->idev; + struct device *parent = idev->dev.parent; + unsigned int val; + int err; + + err = regmap_read(regmap, PM886_REG_STATUS1, &val); + if (err) { + dev_err(parent, "Failed to read status: %d\n", err); + return IRQ_NONE; + } + val &= PM886_ONKEY_STS1; + + input_report_key(idev, KEY_POWER, val); + input_sync(idev); + + return IRQ_HANDLED; +} + +static int pm886_onkey_probe(struct platform_device *pdev) +{ + struct pm886_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct pm886_onkey *onkey; + struct input_dev *idev; + int irq, err; + + onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL); + if (!onkey) + return -ENOMEM; + + onkey->chip = chip; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return dev_err_probe(dev, irq, "Failed to get IRQ\n"); + + idev = devm_input_allocate_device(dev); + if (!idev) { + dev_err(dev, "Failed to allocate input device\n"); + return -ENOMEM; + } + onkey->idev = idev; + + idev->name = "88pm886-onkey"; + idev->phys = "88pm886-onkey/input0"; + idev->id.bustype = BUS_I2C; + + input_set_capability(idev, EV_KEY, KEY_POWER); + + err = devm_request_threaded_irq(dev, irq, NULL, pm886_onkey_irq_handler, + IRQF_ONESHOT | IRQF_NO_SUSPEND, "onkey", + onkey); + if (err) + return dev_err_probe(dev, err, "Failed to request IRQ\n"); + + err = input_register_device(idev); + if (err) + return dev_err_probe(dev, err, "Failed to register input device\n"); + + return 0; +} + +static const struct platform_device_id pm886_onkey_id_table[] = { + { "88pm886-onkey", }, + { } +}; +MODULE_DEVICE_TABLE(platform, pm886_onkey_id_table); + +static struct platform_driver pm886_onkey_driver = { + .driver = { + .name = "88pm886-onkey", + }, + .probe = pm886_onkey_probe, + .id_table = pm886_onkey_id_table, +}; +module_platform_driver(pm886_onkey_driver); + +MODULE_DESCRIPTION("Marvell 88PM886 onkey driver"); +MODULE_AUTHOR("Karel Balej "); +MODULE_LICENSE("GPL"); -- cgit v1.3.1