From 2bd30b8dc75b823dd7bbef9d7bc68e1fd7ecee5c Mon Sep 17 00:00:00 2001 From: Sang-Heon Jeon Date: Mon, 24 Aug 2026 01:18:14 +0900 Subject: coccinelle: alloc_cast: drop removed allocators - pci_alloc_consistent() and pci_zalloc_consistent() were removed by commit 7968778914e5 ("PCI: Remove the deprecated "pci-dma-compat.h" API") - kmem_alloc() was removed by commit f078d4ea8276 ("xfs: convert kmem_alloc() to kmalloc()") - kmem_zalloc() was removed by commit 10634530f7ba ("xfs: convert kmem_zalloc() to kzalloc()") - kmem_zone_alloc() and kmem_zone_zalloc() were removed by commit bae633a4a283 ("xfs: remove xfs_zone_{alloc,zalloc} helpers") So drop them from the rules. No functional change. Signed-off-by: Sang-Heon Jeon Signed-off-by: Julia Lawall --- drivers/gpio/gpiolib-of.c | 1098 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1098 insertions(+) create mode 100644 drivers/gpio/gpiolib-of.c (limited to 'drivers/gpio/gpiolib-of.c') diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c new file mode 100644 index 000000000..940b56694 --- /dev/null +++ b/drivers/gpio/gpiolib-of.c @@ -0,0 +1,1098 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * OF helpers for the GPIO API + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "gpiolib.h" +#include "gpiolib-of.h" + +/* + * This is Linux-specific flags. By default controllers' and Linux' mapping + * match, but GPIO controllers are free to translate their own flags to + * Linux-specific in their .xlate callback. Though, 1:1 mapping is recommended. + */ +enum of_gpio_flags { + OF_GPIO_ACTIVE_LOW = 0x1, + OF_GPIO_SINGLE_ENDED = 0x2, + OF_GPIO_OPEN_DRAIN = 0x4, + OF_GPIO_TRANSITORY = 0x8, + OF_GPIO_PULL_UP = 0x10, + OF_GPIO_PULL_DOWN = 0x20, + OF_GPIO_PULL_DISABLE = 0x40, +}; + +/** + * of_gpio_named_count() - Count GPIOs for a device + * @np: device node to count GPIOs for + * @propname: property name containing gpio specifier(s) + * + * The function returns the count of GPIOs specified for a node. + * NOTE: The empty GPIO specifiers count too. + * + * Returns: + * Either number of GPIOs defined in the property, or + * * %-EINVAL for an incorrectly formed "gpios" property, or + * * %-ENOENT for a missing "gpios" property. + * + * Example:: + * + * gpios = <0 + * &gpio1 1 2 + * 0 + * &gpio2 3 4>; + * + * The above example defines four GPIOs, two of which are not specified. + * This function will return '4' + */ +static int of_gpio_named_count(const struct device_node *np, + const char *propname) +{ + return of_count_phandle_with_args(np, propname, "#gpio-cells"); +} + +/** + * of_gpio_spi_cs_get_count() - special GPIO counting for SPI + * @np: Consuming device node + * @con_id: Function within the GPIO consumer + * + * Some elder GPIO controllers need special quirks. Currently we handle + * the Freescale and PPC GPIO controller with bindings that doesn't use the + * established "cs-gpios" for chip selects but instead rely on + * "gpios" for the chip select lines. If we detect this, we redirect + * the counting of "cs-gpios" to count "gpios" transparent to the + * driver. + * + * Returns: + * Either number of GPIOs defined in the property, or + * * %-EINVAL for an incorrectly formed "gpios" property, or + * * %-ENOENT for a missing "gpios" property. + */ +static int of_gpio_spi_cs_get_count(const struct device_node *np, + const char *con_id) +{ + if (!IS_ENABLED(CONFIG_SPI_MASTER)) + return 0; + if (!con_id || strcmp(con_id, "cs")) + return 0; + if (!of_device_is_compatible(np, "fsl,spi") && + !of_device_is_compatible(np, "aeroflexgaisler,spictrl") && + !of_device_is_compatible(np, "ibm,ppc4xx-spi")) + return 0; + return of_gpio_named_count(np, "gpios"); +} + +int of_gpio_count(const struct fwnode_handle *fwnode, const char *con_id) +{ + const struct device_node *np = to_of_node(fwnode); + int ret; + char propname[32]; + + ret = of_gpio_spi_cs_get_count(np, con_id); + if (ret > 0) + return ret; + + for_each_gpio_property_name(propname, con_id) { + ret = of_gpio_named_count(np, propname); + if (ret > 0) + break; + } + return ret ? ret : -ENOENT; +} + +static int of_gpiochip_match_node_and_xlate(struct gpio_chip *chip, + const void *data) +{ + const struct of_phandle_args *gpiospec = data; + + return device_match_of_node(&chip->gpiodev->dev, gpiospec->np) && + chip->of_xlate && + chip->of_xlate(chip, gpiospec, NULL) >= 0; +} + +static struct gpio_device * +of_find_gpio_device_by_xlate(const struct of_phandle_args *gpiospec) +{ + return gpio_device_find(gpiospec, of_gpiochip_match_node_and_xlate); +} + +static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip, + struct of_phandle_args *gpiospec, + enum of_gpio_flags *flags) +{ + int ret; + + if (chip->of_gpio_n_cells != gpiospec->args_count) + return ERR_PTR(-EINVAL); + + ret = chip->of_xlate(chip, gpiospec, flags); + if (ret < 0) + return ERR_PTR(ret); + + return gpiochip_get_desc(chip, ret); +} + +/* + * Overrides stated polarity of a gpio line and warns when there is a + * discrepancy. + */ +static void of_gpio_quirk_polarity(const struct device_node *np, + bool active_high, + enum of_gpio_flags *flags) +{ + if (active_high) { + if (*flags & OF_GPIO_ACTIVE_LOW) { + pr_warn("%s GPIO handle specifies active low - ignored\n", + of_node_full_name(np)); + *flags &= ~OF_GPIO_ACTIVE_LOW; + } + } else { + if (!(*flags & OF_GPIO_ACTIVE_LOW)) + pr_info("%s enforce active low on GPIO handle\n", + of_node_full_name(np)); + *flags |= OF_GPIO_ACTIVE_LOW; + } +} + +/* + * This quirk does static polarity overrides in cases where existing + * DTS specified incorrect polarity. + */ +static void of_gpio_try_fixup_polarity(const struct device_node *np, + const char *propname, + enum of_gpio_flags *flags) +{ + static const struct { + const char *compatible; + const char *propname; + bool active_high; + } gpios[] = { +#if IS_ENABLED(CONFIG_LCD_HX8357) + /* + * Himax LCD controllers used incorrectly named + * "gpios-reset" property and also specified wrong + * polarity. + */ + { "himax,hx8357", "gpios-reset", false }, + { "himax,hx8369", "gpios-reset", false }, +#endif +#if IS_ENABLED(CONFIG_MTD_NAND_JZ4780) + /* + * The rb-gpios semantics was undocumented and qi,lb60 (along with + * the ingenic driver) got it wrong. The active state encodes the + * NAND ready state, which is high level. Since there's no signal + * inverter on this board, it should be active-high. Let's fix that + * here for older DTs so we can re-use the generic nand_gpio_waitrdy() + * helper, and be consistent with what other drivers do. + */ + { "qi,lb60", "rb-gpios", true }, +#endif +#if IS_ENABLED(CONFIG_IEEE802154_CA8210) + /* + * According to the datasheet, the NRST pin 27 is an active-low + * signal. However, the device tree schema and admittedly + * the out-of-tree implementations have been used for a long + * time incorrectly by describing reset GPIO as active-high. + */ + { "cascoda,ca8210", "reset-gpio", false }, +#endif +#if IS_ENABLED(CONFIG_PCI_LANTIQ) + /* + * According to the PCI specification, the RST# pin is an + * active-low signal. However, most of the device trees that + * have been widely used for a long time incorrectly describe + * reset GPIO as active-high, and were also using wrong name + * for the property. + */ + { "lantiq,pci-xway", "gpio-reset", false }, +#endif +#if IS_ENABLED(CONFIG_REGULATOR_S5M8767) + /* + * According to S5M8767, the DVS and DS pin are + * active-high signals. However, exynos5250-spring.dts use + * active-low setting. + */ + { "samsung,s5m8767-pmic", "s5m8767,pmic-buck-dvs-gpios", true }, + { "samsung,s5m8767-pmic", "s5m8767,pmic-buck-ds-gpios", true }, +#endif +#if IS_ENABLED(CONFIG_TOUCHSCREEN_TSC2005) + /* + * DTS for Nokia N900 incorrectly specified "active high" + * polarity for the reset line, while the chip actually + * treats it as "active low". + */ + { "ti,tsc2005", "reset-gpios", false }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_WSA881X) + /* + * WSA881 powerdown is always active low, but some device trees + * missed this when first contributed. It also has a very strange + * compatible. + */ + { "sdw10217201000", "powerdown-gpios", false }, +#endif + }; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + if (of_device_is_compatible(np, gpios[i].compatible) && + !strcmp(propname, gpios[i].propname)) { + of_gpio_quirk_polarity(np, gpios[i].active_high, flags); + break; + } + } +} + +static void of_gpio_set_polarity_by_property(const struct device_node *np, + const char *propname, + enum of_gpio_flags *flags) +{ + const struct device_node *np_compat = np; + const struct device_node *np_propname = np; + static const struct { + const char *compatible; + const char *gpio_propname; + const char *polarity_propname; + } gpios[] = { +#if IS_ENABLED(CONFIG_FEC) + /* Freescale Fast Ethernet Controller */ + { "fsl,imx25-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx27-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx28-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx6q-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,mvf600-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx6sx-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx6ul-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx8mq-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx8qm-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,s32v234-fec", "phy-reset-gpios", "phy-reset-active-high" }, +#endif +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) + { "atmel,hsmci", "cd-gpios", "cd-inverted" }, +#endif +#if IS_ENABLED(CONFIG_PCI_IMX6) + { "fsl,imx6q-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx6sx-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx6qp-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx7d-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx8mq-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx8mm-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx8mp-pcie", "reset-gpio", "reset-gpio-active-high" }, +#endif + + /* + * The regulator GPIO handles are specified such that the + * presence or absence of "enable-active-high" solely controls + * the polarity of the GPIO line. Any phandle flags must + * be actively ignored. + */ +#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) + { "regulator-fixed", "gpios", "enable-active-high" }, + { "regulator-fixed", "gpio", "enable-active-high" }, + { "reg-fixed-voltage", "gpios", "enable-active-high" }, + { "reg-fixed-voltage", "gpio", "enable-active-high" }, +#endif +#if IS_ENABLED(CONFIG_REGULATOR_GPIO) + { "regulator-gpio", "enable-gpio", "enable-active-high" }, + { "regulator-gpio", "enable-gpios", "enable-active-high" }, +#endif + }; + unsigned int i; + bool active_high; + +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) + /* + * The Atmel HSMCI has compatible property in the parent node and + * gpio property in a child node + */ + if (of_device_is_compatible(np->parent, "atmel,hsmci")) { + np_compat = np->parent; + np_propname = np; + } +#endif + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + if (of_device_is_compatible(np_compat, gpios[i].compatible) && + !strcmp(propname, gpios[i].gpio_propname)) { + active_high = of_property_read_bool(np_propname, + gpios[i].polarity_propname); + of_gpio_quirk_polarity(np, active_high, flags); + break; + } + } +} + +static void of_gpio_flags_quirks(const struct device_node *np, + const char *propname, + enum of_gpio_flags *flags, + int index) +{ + of_gpio_try_fixup_polarity(np, propname, flags); + of_gpio_set_polarity_by_property(np, propname, flags); + + /* + * Legacy open drain handling for fixed voltage regulators. + */ + if (IS_ENABLED(CONFIG_REGULATOR) && + of_device_is_compatible(np, "reg-fixed-voltage") && + of_property_read_bool(np, "gpio-open-drain")) { + *flags |= (OF_GPIO_SINGLE_ENDED | OF_GPIO_OPEN_DRAIN); + pr_info("%s uses legacy open drain flag - update the DTS if you can\n", + of_node_full_name(np)); + } + + /* + * Legacy handling of SPI active high chip select. If we have a + * property named "cs-gpios" we need to inspect the child node + * to determine if the flags should have inverted semantics. + */ + if (IS_ENABLED(CONFIG_SPI_MASTER) && !strcmp(propname, "cs-gpios") && + of_property_present(np, "cs-gpios")) { + u32 cs; + int ret; + + for_each_child_of_node_scoped(np, child) { + ret = of_property_read_u32(child, "reg", &cs); + if (ret) + continue; + if (cs == index) { + /* + * SPI children have active low chip selects + * by default. This can be specified negatively + * by just omitting "spi-cs-high" in the + * device node, or actively by tagging on + * GPIO_ACTIVE_LOW as flag in the device + * tree. If the line is simultaneously + * tagged as active low in the device tree + * and has the "spi-cs-high" set, we get a + * conflict and the "spi-cs-high" flag will + * take precedence. + */ + bool active_high = of_property_read_bool(child, + "spi-cs-high"); + of_gpio_quirk_polarity(child, active_high, + flags); + break; + } + } + } + + /* Legacy handling of stmmac's active-low PHY reset line */ + if (IS_ENABLED(CONFIG_STMMAC_ETH) && + !strcmp(propname, "snps,reset-gpio") && + of_property_read_bool(np, "snps,reset-active-low")) + *flags |= OF_GPIO_ACTIVE_LOW; +} + +/** + * of_get_named_gpiod_flags() - Get a GPIO descriptor and flags for GPIO API + * @np: device node to get GPIO from + * @propname: property name containing gpio specifier(s) + * @index: index of the GPIO + * @flags: a flags pointer to fill in + * + * Returns: + * GPIO descriptor to use with Linux GPIO API, or one of the errno + * value on the error condition. If @flags is not NULL the function also fills + * in flags for the GPIO. + */ +static struct gpio_desc *of_get_named_gpiod_flags(const struct device_node *np, + const char *propname, int index, enum of_gpio_flags *flags) +{ + struct of_phandle_args gpiospec; + struct gpio_desc *desc; + int ret; + + ret = of_parse_phandle_with_args_map(np, propname, "gpio", index, + &gpiospec); + if (ret) { + pr_debug("%s: can't parse '%s' property of node '%pOF[%d]'\n", + __func__, propname, np, index); + return ERR_PTR(ret); + } + + struct gpio_device *gdev __free(gpio_device_put) = + of_find_gpio_device_by_xlate(&gpiospec); + if (!gdev) { + desc = ERR_PTR(-EPROBE_DEFER); + goto out; + } + + desc = of_xlate_and_get_gpiod_flags(gpio_device_get_chip(gdev), + &gpiospec, flags); + if (IS_ERR(desc)) + goto out; + + if (flags) + of_gpio_flags_quirks(np, propname, flags, index); + + pr_debug("%s: parsed '%s' property of node '%pOF[%d]' - status (%d)\n", + __func__, propname, np, index, + PTR_ERR_OR_ZERO(desc)); + +out: + of_node_put(gpiospec.np); + + return desc; +} + +/* Converts gpio_lookup_flags into bitmask of GPIO_* values */ +static unsigned long of_convert_gpio_flags(enum of_gpio_flags flags) +{ + unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT; + + if (flags & OF_GPIO_ACTIVE_LOW) + lflags |= GPIO_ACTIVE_LOW; + + if (flags & OF_GPIO_SINGLE_ENDED) { + if (flags & OF_GPIO_OPEN_DRAIN) + lflags |= GPIO_OPEN_DRAIN; + else + lflags |= GPIO_OPEN_SOURCE; + } + + if (flags & OF_GPIO_TRANSITORY) + lflags |= GPIO_TRANSITORY; + + if (flags & OF_GPIO_PULL_UP) + lflags |= GPIO_PULL_UP; + + if (flags & OF_GPIO_PULL_DOWN) + lflags |= GPIO_PULL_DOWN; + + if (flags & OF_GPIO_PULL_DISABLE) + lflags |= GPIO_PULL_DISABLE; + + return lflags; +} + +static struct gpio_desc *of_find_gpio_rename(struct device_node *np, + const char *con_id, + unsigned int idx, + enum of_gpio_flags *of_flags) +{ + static const struct of_rename_gpio { + const char *con_id; + const char *legacy_id; /* NULL - same as con_id */ + /* + * Compatible string can be set to NULL in case where + * matching to a particular compatible is not practical, + * but it should only be done for gpio names that have + * vendor prefix to reduce risk of false positives. + * Addition of such entries is strongly discouraged. + */ + const char *compatible; + } gpios[] = { +#if IS_ENABLED(CONFIG_LCD_HX8357) + /* Himax LCD controllers used "gpios-reset" */ + { "reset", "gpios-reset", "himax,hx8357" }, + { "reset", "gpios-reset", "himax,hx8369" }, +#endif +#if IS_ENABLED(CONFIG_MFD_ARIZONA) + { "wlf,reset", NULL, NULL }, +#endif +#if IS_ENABLED(CONFIG_RTC_DRV_MOXART) + { "rtc-data", "gpio-rtc-data", "moxa,moxart-rtc" }, + { "rtc-sclk", "gpio-rtc-sclk", "moxa,moxart-rtc" }, + { "rtc-reset", "gpio-rtc-reset", "moxa,moxart-rtc" }, +#endif +#if IS_ENABLED(CONFIG_NFC_MRVL_I2C) + { "reset", "reset-n-io", "marvell,nfc-i2c" }, +#endif +#if IS_ENABLED(CONFIG_NFC_MRVL_SPI) + { "reset", "reset-n-io", "marvell,nfc-spi" }, +#endif +#if IS_ENABLED(CONFIG_NFC_MRVL_UART) + { "reset", "reset-n-io", "marvell,nfc-uart" }, + { "reset", "reset-n-io", "mrvl,nfc-uart" }, +#endif +#if IS_ENABLED(CONFIG_NFC_S3FWRN5_I2C) + { "en", "s3fwrn5,en-gpios", "samsung,s3fwrn5-i2c" }, + { "wake", "s3fwrn5,fw-gpios", "samsung,s3fwrn5-i2c" }, +#endif +#if IS_ENABLED(CONFIG_PCI_LANTIQ) + /* MIPS Lantiq PCI */ + { "reset", "gpio-reset", "lantiq,pci-xway" }, +#endif + + /* + * Some regulator bindings happened before we managed to + * establish that GPIO properties should be named + * "foo-gpios" so we have this special kludge for them. + */ +#if IS_ENABLED(CONFIG_REGULATOR_ARIZONA_LDO1) + { "wlf,ldoena", NULL, NULL }, /* Arizona */ +#endif +#if IS_ENABLED(CONFIG_REGULATOR_WM8994) + { "wlf,ldo1ena", NULL, NULL }, /* WM8994 */ + { "wlf,ldo2ena", NULL, NULL }, /* WM8994 */ +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_CS42L56) + { "reset", "cirrus,gpio-nreset", "cirrus,cs42l56" }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_MT2701_CS42448) + { "i2s1-in-sel-gpio1", NULL, "mediatek,mt2701-cs42448-machine" }, + { "i2s1-in-sel-gpio2", NULL, "mediatek,mt2701-cs42448-machine" }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_TLV320AIC3X) + { "reset", "gpio-reset", "ti,tlv320aic3x" }, + { "reset", "gpio-reset", "ti,tlv320aic33" }, + { "reset", "gpio-reset", "ti,tlv320aic3007" }, + { "reset", "gpio-reset", "ti,tlv320aic3104" }, + { "reset", "gpio-reset", "ti,tlv320aic3106" }, +#endif +#if IS_ENABLED(CONFIG_SPI_GPIO) + /* + * The SPI GPIO bindings happened before we managed to + * establish that GPIO properties should be named + * "foo-gpios" so we have this special kludge for them. + */ + { "miso", "gpio-miso", "spi-gpio" }, + { "mosi", "gpio-mosi", "spi-gpio" }, + { "sck", "gpio-sck", "spi-gpio" }, +#endif + + /* + * The old Freescale bindings use simply "gpios" as name + * for the chip select lines rather than "cs-gpios" like + * all other SPI hardware. Allow this specifically for + * Freescale and PPC devices. + */ +#if IS_ENABLED(CONFIG_SPI_FSL_SPI) + { "cs", "gpios", "fsl,spi" }, + { "cs", "gpios", "aeroflexgaisler,spictrl" }, +#endif +#if IS_ENABLED(CONFIG_SPI_PPC4xx) + { "cs", "gpios", "ibm,ppc4xx-spi" }, +#endif + +#if IS_ENABLED(CONFIG_TYPEC_FUSB302) + /* + * Fairchild FUSB302 host is using undocumented "fcs,int_n" + * property without the compulsory "-gpios" suffix. + */ + { "fcs,int_n", NULL, "fcs,fusb302" }, +#endif + }; + struct gpio_desc *desc; + const char *legacy_id; + unsigned int i; + + if (!con_id) + return ERR_PTR(-ENOENT); + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + if (strcmp(con_id, gpios[i].con_id)) + continue; + + if (gpios[i].compatible && + !of_device_is_compatible(np, gpios[i].compatible)) + continue; + + legacy_id = gpios[i].legacy_id ?: gpios[i].con_id; + desc = of_get_named_gpiod_flags(np, legacy_id, idx, of_flags); + if (!gpiod_not_found(desc)) { + pr_info("%s uses legacy gpio name '%s' instead of '%s-gpios'\n", + of_node_full_name(np), legacy_id, con_id); + return desc; + } + } + + return ERR_PTR(-ENOENT); +} + +#if IS_ENABLED(CONFIG_SND_SOC_MT2701_CS42448) +static struct gpio_desc *of_find_mt2701_gpio(struct device_node *np, + const char *con_id, + unsigned int idx, + enum of_gpio_flags *of_flags) +{ + struct gpio_desc *desc; + const char *legacy_id; + + if (!IS_ENABLED(CONFIG_SND_SOC_MT2701_CS42448)) + return ERR_PTR(-ENOENT); + + if (!of_device_is_compatible(np, "mediatek,mt2701-cs42448-machine")) + return ERR_PTR(-ENOENT); + + if (!con_id || strcmp(con_id, "i2s1-in-sel")) + return ERR_PTR(-ENOENT); + + if (idx == 0) + legacy_id = "i2s1-in-sel-gpio1"; + else if (idx == 1) + legacy_id = "i2s1-in-sel-gpio2"; + else + return ERR_PTR(-ENOENT); + + desc = of_get_named_gpiod_flags(np, legacy_id, 0, of_flags); + if (!gpiod_not_found(desc)) + pr_info("%s is using legacy gpio name '%s' instead of '%s-gpios'\n", + of_node_full_name(np), legacy_id, con_id); + + return desc; +} +#endif + +/* + * Trigger sources are special, they allow us to use any GPIO as a LED trigger + * and have the name "trigger-sources" no matter which kind of phandle it is + * pointing to, whether to a GPIO, a USB host, a network PHY etc. So in this case + * we allow looking something up that is not named "foo-gpios". + */ +static struct gpio_desc *of_find_trigger_gpio(struct device_node *np, + const char *con_id, + unsigned int idx, + enum of_gpio_flags *of_flags) +{ + struct gpio_desc *desc; + + if (!IS_ENABLED(CONFIG_LEDS_TRIGGER_GPIO)) + return ERR_PTR(-ENOENT); + + if (!con_id || strcmp(con_id, "trigger-sources")) + return ERR_PTR(-ENOENT); + + desc = of_get_named_gpiod_flags(np, con_id, idx, of_flags); + if (!gpiod_not_found(desc)) + pr_debug("%s is used as a trigger\n", of_node_full_name(np)); + + return desc; +} + + +typedef struct gpio_desc *(*of_find_gpio_quirk)(struct device_node *np, + const char *con_id, + unsigned int idx, + enum of_gpio_flags *of_flags); +static const of_find_gpio_quirk of_find_gpio_quirks[] = { + of_find_gpio_rename, +#if IS_ENABLED(CONFIG_SND_SOC_MT2701_CS42448) + of_find_mt2701_gpio, +#endif + of_find_trigger_gpio, + NULL +}; + +struct gpio_desc *of_find_gpio(struct device_node *np, const char *con_id, + unsigned int idx, unsigned long *flags) +{ + char propname[32]; /* 32 is max size of property name */ + enum of_gpio_flags of_flags = 0; + const of_find_gpio_quirk *q; + struct gpio_desc *desc; + + /* Try GPIO property "foo-gpios" and "foo-gpio" */ + for_each_gpio_property_name(propname, con_id) { + desc = of_get_named_gpiod_flags(np, propname, idx, &of_flags); + if (!gpiod_not_found(desc)) + break; + } + + /* Properly named GPIO was not found, try workarounds */ + for (q = of_find_gpio_quirks; gpiod_not_found(desc) && *q; q++) + desc = (*q)(np, con_id, idx, &of_flags); + + if (IS_ERR(desc)) + return desc; + + *flags = of_convert_gpio_flags(of_flags); + + return desc; +} + +int of_gpiochip_get_lflags(struct gpio_chip *chip, + struct fwnode_reference_args *gpiospec, + unsigned long *lflags) +{ + enum of_gpio_flags xlate_flags; + struct of_phandle_args args; + struct gpio_desc *desc; + + args.np = to_of_node(gpiospec->fwnode); + args.args_count = gpiospec->nargs; + + for (int i = 0; i < args.args_count; i++) + args.args[i] = gpiospec->args[i]; + + desc = of_xlate_and_get_gpiod_flags(chip, &args, &xlate_flags); + if (IS_ERR(desc)) + return PTR_ERR(desc); + + *lflags = of_convert_gpio_flags(xlate_flags); + + return 0; +} + +#ifdef CONFIG_OF_DYNAMIC +/** + * of_gpiochip_remove_hog - Remove all hogs in a hog device node + * @chip: gpio chip to act on + * @hog: device node describing the hogs + */ +static void of_gpiochip_remove_hog(struct gpio_chip *chip, + struct device_node *hog) +{ + struct gpio_desc *desc; + + for_each_gpio_desc_with_flag(chip, desc, GPIOD_FLAG_IS_HOGGED) + if (READ_ONCE(desc->hog) == hog) + gpiochip_free_own_desc(desc); +} + +static int of_gpiochip_match_node(struct gpio_chip *chip, const void *data) +{ + return device_match_of_node(&chip->gpiodev->dev, data); +} + +static struct gpio_device *of_find_gpio_device_by_node(struct device_node *np) +{ + return gpio_device_find(np, of_gpiochip_match_node); +} + +static int of_gpio_notify(struct notifier_block *nb, unsigned long action, + void *arg) +{ + struct gpio_device *gdev __free(gpio_device_put) = NULL; + struct of_reconfig_data *rd = arg; + int ret; + + /* + * This only supports adding and removing complete gpio-hog nodes. + * Modifying an existing gpio-hog node is not supported (except for + * changing its "status" property, which is treated the same as + * addition/removal). + */ + switch (of_reconfig_get_state_change(action, arg)) { + case OF_RECONFIG_CHANGE_ADD: + if (!of_property_read_bool(rd->dn, "gpio-hog")) + return NOTIFY_DONE; /* not for us */ + + if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) + return NOTIFY_DONE; + + gdev = of_find_gpio_device_by_node(rd->dn->parent); + if (!gdev) + return NOTIFY_DONE; /* not for us */ + + ret = gpiochip_add_hog(gpio_device_get_chip(gdev), of_fwnode_handle(rd->dn)); + if (ret < 0) { + pr_err("%s: failed to add hogs for %pOF\n", __func__, + rd->dn); + of_node_clear_flag(rd->dn, OF_POPULATED); + return notifier_from_errno(ret); + } + return NOTIFY_OK; + + case OF_RECONFIG_CHANGE_REMOVE: + if (!of_node_check_flag(rd->dn, OF_POPULATED)) + return NOTIFY_DONE; /* already depopulated */ + + gdev = of_find_gpio_device_by_node(rd->dn->parent); + if (!gdev) + return NOTIFY_DONE; /* not for us */ + + of_gpiochip_remove_hog(gpio_device_get_chip(gdev), rd->dn); + of_node_clear_flag(rd->dn, OF_POPULATED); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +struct notifier_block gpio_of_notifier = { + .notifier_call = of_gpio_notify, +}; +#endif /* CONFIG_OF_DYNAMIC */ + +/** + * of_gpio_twocell_xlate - translate twocell gpiospec to the GPIO number and flags + * @gc: pointer to the gpio_chip structure + * @gpiospec: GPIO specifier as found in the device tree + * @flags: a flags pointer to fill in + * + * This is simple translation function, suitable for the most 1:1 mapped + * GPIO chips. This function performs only one sanity check: whether GPIO + * is less than ngpios (that is specified in the gpio_chip). + * + * Returns: + * GPIO number (>= 0) on success, negative errno on failure. + */ +static int of_gpio_twocell_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + /* + * We're discouraging gpio_cells < 2, since that way you'll have to + * write your own xlate function (that will have to retrieve the GPIO + * number and the flags from a single gpio cell -- this is possible, + * but not recommended). + */ + if (gc->of_gpio_n_cells != 2) { + WARN_ON(1); + return -EINVAL; + } + + if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) + return -EINVAL; + + if (gpiospec->args[0] >= gc->ngpio) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[1]; + + return gpiospec->args[0]; +} + +/** + * of_gpio_threecell_xlate - translate threecell gpiospec to the GPIO number and flags + * @gc: pointer to the gpio_chip structure + * @gpiospec: GPIO specifier as found in the device tree + * @flags: a flags pointer to fill in + * + * This is simple translation function, suitable for the most 1:n mapped + * GPIO chips, i.e. several GPIO chip instances from one device tree node. + * In this case the following binding is implied: + * + * foo-gpios = <&gpio instance offset flags>; + * + * Returns: + * GPIO number (>= 0) on success, negative errno on failure. + */ +static int of_gpio_threecell_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + if (gc->of_gpio_n_cells != 3) { + WARN_ON(1); + return -EINVAL; + } + + if (WARN_ON(gpiospec->args_count != 3)) + return -EINVAL; + + /* + * Check chip instance number, the driver responds with true if + * this is the chip we are looking for. + */ + if (!gc->of_node_instance_match(gc, gpiospec->args[0])) + return -EINVAL; + + if (gpiospec->args[1] >= gc->ngpio) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[2]; + + return gpiospec->args[1]; +} + +#ifdef CONFIG_PINCTRL +static int of_gpiochip_add_pin_range(struct gpio_chip *chip) +{ + struct of_phandle_args pinspec; + struct pinctrl_dev *pctldev; + struct device_node *np; + int index = 0, ret, trim; + const char *name; + static const char group_names_propname[] = "gpio-ranges-group-names"; + bool has_group_names; + int offset; /* Offset of the first GPIO line on the chip */ + int pin; /* Pin base number in the range */ + int count; /* Number of pins/GPIO lines to map */ + + np = dev_of_node(&chip->gpiodev->dev); + if (!np) + return 0; + + has_group_names = of_property_present(np, group_names_propname); + + for (;; index++) { + /* + * Ordinary phandles contain 2-3 cells: + * gpios = <&gpio [instance] offset flags>; + * Ranges always contain one more cell: + * gpio-ranges <&pinctrl [gpio_instance] gpio_offet pin_offet count>; + * This is why we parse chip->of_gpio_n_cells + 1 cells + */ + ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", + chip->of_gpio_n_cells + 1, + index, &pinspec); + if (ret) + break; + + pctldev = of_pinctrl_get(pinspec.np); + of_node_put(pinspec.np); + if (!pctldev) + return -EPROBE_DEFER; + + if (chip->of_gpio_n_cells == 3) { + /* First cell is the gpiochip instance number */ + offset = pinspec.args[1]; + pin = pinspec.args[2]; + count = pinspec.args[3]; + } else { + offset = pinspec.args[0]; + pin = pinspec.args[1]; + count = pinspec.args[2]; + } + + /* + * With multiple GPIO chips per node, check that this chip is the + * right instance. + */ + if (chip->of_node_instance_match && + (chip->of_gpio_n_cells == 3) && + !chip->of_node_instance_match(chip, pinspec.args[0])) + continue; + + /* Ignore ranges outside of this GPIO chip */ + if (offset >= (chip->offset + chip->ngpio)) + continue; + if (offset + count <= chip->offset) + continue; + + if (count) { + /* npins != 0: linear range */ + if (has_group_names) { + of_property_read_string_index(np, + group_names_propname, + index, &name); + if (strlen(name)) { + pr_err("%pOF: Group name of numeric GPIO ranges must be the empty string.\n", + np); + break; + } + } + + /* Trim the range to fit this GPIO chip */ + if (chip->offset > offset) { + trim = chip->offset - offset; + count -= trim; + pin += trim; + offset = 0; + } else { + offset -= chip->offset; + } + if ((offset + count) > chip->ngpio) + count = chip->ngpio - offset; + + ret = gpiochip_add_pin_range(chip, + pinctrl_dev_get_devname(pctldev), + offset, + pin, + count); + if (ret) + return ret; + } else { + /* npins == 0: special range */ + if (pin) { + pr_err("%pOF: Illegal gpio-range format.\n", + np); + break; + } + + if (!has_group_names) { + pr_err("%pOF: GPIO group range requested but no %s property.\n", + np, group_names_propname); + break; + } + + ret = of_property_read_string_index(np, + group_names_propname, + index, &name); + if (ret) + break; + + if (!strlen(name)) { + pr_err("%pOF: Group name of GPIO group range cannot be the empty string.\n", + np); + break; + } + + ret = gpiochip_add_pingroup_range(chip, pctldev, + offset, name); + if (ret) + return ret; + } + } + + return 0; +} + +#else +static int of_gpiochip_add_pin_range(struct gpio_chip *chip) { return 0; } +#endif + +int of_gpiochip_add(struct gpio_chip *chip) +{ + struct device_node *np; + int ret; + + np = dev_of_node(&chip->gpiodev->dev); + if (!np) + return 0; + + if (!chip->of_xlate) { + if (chip->of_gpio_n_cells == 3) { + if (!chip->of_node_instance_match) + return -EINVAL; + chip->of_xlate = of_gpio_threecell_xlate; + } else { + chip->of_gpio_n_cells = 2; + chip->of_xlate = of_gpio_twocell_xlate; + } + } + + if (chip->of_gpio_n_cells > MAX_PHANDLE_ARGS) + return -EINVAL; + + ret = of_gpiochip_add_pin_range(chip); + if (ret) + return ret; + + of_node_get(np); + + return ret; +} + +void of_gpiochip_remove(struct gpio_chip *chip) +{ + struct device_node *np = dev_of_node(&chip->gpiodev->dev); + + for_each_child_of_node_scoped(np, child) { + if (of_property_present(child, "gpio-hog")) + of_node_clear_flag(child, OF_POPULATED); + } + + of_node_put(np); +} + +bool of_gpiochip_instance_match(struct gpio_chip *gc, unsigned int index) +{ + if (gc->of_node_instance_match) + return gc->of_node_instance_match(gc, index); + + return false; +} -- cgit v1.3.1