From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- drivers/fpga/Makefile | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 drivers/fpga/Makefile (limited to 'drivers/fpga/Makefile') diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile new file mode 100644 index 000000000..6f5798b27 --- /dev/null +++ b/drivers/fpga/Makefile @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the fpga framework and fpga manager drivers. +# + +# Core FPGA Manager Framework +obj-$(CONFIG_FPGA) += fpga-mgr.o + +# FPGA Manager Drivers +obj-$(CONFIG_FPGA_MGR_ALTERA_CVP) += altera-cvp.o +obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI) += altera-ps-spi.o +obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o +obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI) += machxo2-spi.o +obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o +obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o +obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC) += stratix10-soc.o +obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o +obj-$(CONFIG_FPGA_MGR_XILINX_CORE) += xilinx-core.o +obj-$(CONFIG_FPGA_MGR_XILINX_SELECTMAP) += xilinx-selectmap.o +obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o +obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o +obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o +obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA) += versal-fpga.o +obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI) += microchip-spi.o +obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG) += lattice-sysconfig.o +obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG_SPI) += lattice-sysconfig-spi.o +obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o +obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o +obj-$(CONFIG_FPGA_MGR_EFINIX_SPI) += efinix-spi.o + +# FPGA Secure Update Drivers +obj-$(CONFIG_FPGA_M10_BMC_SEC_UPDATE) += intel-m10-bmc-sec-update.o + +# FPGA Bridge Drivers +obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o +obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o +obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o +obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o + +# High Level Interfaces +obj-$(CONFIG_FPGA_REGION) += fpga-region.o +obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o + +# FPGA Device Feature List Support +obj-$(CONFIG_FPGA_DFL) += dfl.o +obj-$(CONFIG_FPGA_DFL_FME) += dfl-fme.o +obj-$(CONFIG_FPGA_DFL_FME_MGR) += dfl-fme-mgr.o +obj-$(CONFIG_FPGA_DFL_FME_BRIDGE) += dfl-fme-br.o +obj-$(CONFIG_FPGA_DFL_FME_REGION) += dfl-fme-region.o +obj-$(CONFIG_FPGA_DFL_AFU) += dfl-afu.o + +dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o dfl-fme-error.o +dfl-fme-objs += dfl-fme-perf.o +dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o +dfl-afu-objs += dfl-afu-error.o + +obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o + +# Drivers for FPGAs which implement DFL +obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o + +# KUnit tests +obj-$(CONFIG_FPGA_KUNIT_TESTS) += tests/ -- cgit v1.3.1