From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- drivers/extcon/extcon-max3355.c | 140 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 drivers/extcon/extcon-max3355.c (limited to 'drivers/extcon/extcon-max3355.c') diff --git a/drivers/extcon/extcon-max3355.c b/drivers/extcon/extcon-max3355.c new file mode 100644 index 000000000..d687d178a --- /dev/null +++ b/drivers/extcon/extcon-max3355.c @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Maxim Integrated MAX3355 USB OTG chip extcon driver + * + * Copyright (C) 2014-2015 Cogent Embedded, Inc. + * Author: Sergei Shtylyov + */ + +#include +#include +#include +#include +#include + +struct max3355_data { + struct extcon_dev *edev; + struct gpio_desc *id_gpiod; + struct gpio_desc *shdn_gpiod; +}; + +static const unsigned int max3355_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, +}; + +static irqreturn_t max3355_id_irq(int irq, void *dev_id) +{ + struct max3355_data *data = dev_id; + int id = gpiod_get_value_cansleep(data->id_gpiod); + + if (id) { + /* + * ID = 1 means USB HOST cable detached. + * As we don't have event for USB peripheral cable attached, + * we simulate USB peripheral attach here. + */ + extcon_set_state_sync(data->edev, EXTCON_USB_HOST, false); + extcon_set_state_sync(data->edev, EXTCON_USB, true); + } else { + /* + * ID = 0 means USB HOST cable attached. + * As we don't have event for USB peripheral cable detached, + * we simulate USB peripheral detach here. + */ + extcon_set_state_sync(data->edev, EXTCON_USB, false); + extcon_set_state_sync(data->edev, EXTCON_USB_HOST, true); + } + + return IRQ_HANDLED; +} + +static int max3355_probe(struct platform_device *pdev) +{ + struct max3355_data *data; + struct gpio_desc *gpiod; + int irq, err; + + data = devm_kzalloc(&pdev->dev, sizeof(struct max3355_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN); + if (IS_ERR(gpiod)) { + dev_err(&pdev->dev, "failed to get ID_OUT GPIO\n"); + return PTR_ERR(gpiod); + } + data->id_gpiod = gpiod; + + gpiod = devm_gpiod_get(&pdev->dev, "maxim,shdn", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod)) { + dev_err(&pdev->dev, "failed to get SHDN# GPIO\n"); + return PTR_ERR(gpiod); + } + data->shdn_gpiod = gpiod; + + data->edev = devm_extcon_dev_allocate(&pdev->dev, max3355_cable); + if (IS_ERR(data->edev)) { + dev_err(&pdev->dev, "failed to allocate extcon device\n"); + return PTR_ERR(data->edev); + } + + err = devm_extcon_dev_register(&pdev->dev, data->edev); + if (err < 0) { + dev_err(&pdev->dev, "failed to register extcon device\n"); + return err; + } + + irq = gpiod_to_irq(data->id_gpiod); + if (irq < 0) { + dev_err(&pdev->dev, "failed to translate ID_OUT GPIO to IRQ\n"); + return irq; + } + + err = devm_request_threaded_irq(&pdev->dev, irq, NULL, max3355_id_irq, + IRQF_ONESHOT | IRQF_NO_SUSPEND | + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + pdev->name, data); + if (err < 0) { + dev_err(&pdev->dev, "failed to request ID_OUT IRQ\n"); + return err; + } + + platform_set_drvdata(pdev, data); + + /* Perform initial detection */ + max3355_id_irq(irq, data); + + return 0; +} + +static void max3355_remove(struct platform_device *pdev) +{ + struct max3355_data *data = platform_get_drvdata(pdev); + + gpiod_set_value_cansleep(data->shdn_gpiod, 0); +} + +static const struct of_device_id max3355_match_table[] = { + { .compatible = "maxim,max3355", }, + { } +}; +MODULE_DEVICE_TABLE(of, max3355_match_table); + +static struct platform_driver max3355_driver = { + .probe = max3355_probe, + .remove = max3355_remove, + .driver = { + .name = "extcon-max3355", + .of_match_table = max3355_match_table, + }, +}; + +module_platform_driver(max3355_driver); + +MODULE_AUTHOR("Sergei Shtylyov "); +MODULE_DESCRIPTION("Maxim MAX3355 extcon driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.3.1