From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- drivers/clocksource/timer-sprd.c | 221 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 221 insertions(+) create mode 100644 drivers/clocksource/timer-sprd.c (limited to 'drivers/clocksource/timer-sprd.c') diff --git a/drivers/clocksource/timer-sprd.c b/drivers/clocksource/timer-sprd.c new file mode 100644 index 000000000..2c07dd2af --- /dev/null +++ b/drivers/clocksource/timer-sprd.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Spreadtrum Communications Inc. + */ + +#include +#include + +#include "timer-of.h" + +#define TIMER_NAME "sprd_timer" + +#define TIMER_LOAD_LO 0x0 +#define TIMER_LOAD_HI 0x4 +#define TIMER_VALUE_LO 0x8 +#define TIMER_VALUE_HI 0xc + +#define TIMER_CTL 0x10 +#define TIMER_CTL_PERIOD_MODE BIT(0) +#define TIMER_CTL_ENABLE BIT(1) +#define TIMER_CTL_64BIT_WIDTH BIT(16) + +#define TIMER_INT 0x14 +#define TIMER_INT_EN BIT(0) +#define TIMER_INT_RAW_STS BIT(1) +#define TIMER_INT_MASK_STS BIT(2) +#define TIMER_INT_CLR BIT(3) + +#define TIMER_VALUE_SHDW_LO 0x18 +#define TIMER_VALUE_SHDW_HI 0x1c + +#define TIMER_VALUE_LO_MASK GENMASK(31, 0) +#define TIMER_VALUE_HI_MASK GENMASK(31, 0) + +static void sprd_timer_enable(void __iomem *base, u32 flag) +{ + u32 val = readl_relaxed(base + TIMER_CTL); + + val |= TIMER_CTL_ENABLE; + if (flag & TIMER_CTL_64BIT_WIDTH) + val |= TIMER_CTL_64BIT_WIDTH; + else + val &= ~TIMER_CTL_64BIT_WIDTH; + + if (flag & TIMER_CTL_PERIOD_MODE) + val |= TIMER_CTL_PERIOD_MODE; + else + val &= ~TIMER_CTL_PERIOD_MODE; + + writel_relaxed(val, base + TIMER_CTL); +} + +static void sprd_timer_disable(void __iomem *base) +{ + u32 val = readl_relaxed(base + TIMER_CTL); + + val &= ~TIMER_CTL_ENABLE; + writel_relaxed(val, base + TIMER_CTL); +} + +static void sprd_timer_update_counter(void __iomem *base, unsigned long cycles) +{ + writel_relaxed(cycles & TIMER_VALUE_LO_MASK, base + TIMER_LOAD_LO); + writel_relaxed(0, base + TIMER_LOAD_HI); +} + +static void sprd_timer_enable_interrupt(void __iomem *base) +{ + writel_relaxed(TIMER_INT_EN, base + TIMER_INT); +} + +static void sprd_timer_clear_interrupt(void __iomem *base) +{ + u32 val = readl_relaxed(base + TIMER_INT); + + val |= TIMER_INT_CLR; + writel_relaxed(val, base + TIMER_INT); +} + +static int sprd_timer_set_next_event(unsigned long cycles, + struct clock_event_device *ce) +{ + struct timer_of *to = to_timer_of(ce); + + sprd_timer_disable(timer_of_base(to)); + sprd_timer_update_counter(timer_of_base(to), cycles); + sprd_timer_enable(timer_of_base(to), 0); + + return 0; +} + +static int sprd_timer_set_periodic(struct clock_event_device *ce) +{ + struct timer_of *to = to_timer_of(ce); + + sprd_timer_disable(timer_of_base(to)); + sprd_timer_update_counter(timer_of_base(to), timer_of_period(to)); + sprd_timer_enable(timer_of_base(to), TIMER_CTL_PERIOD_MODE); + + return 0; +} + +static int sprd_timer_shutdown(struct clock_event_device *ce) +{ + struct timer_of *to = to_timer_of(ce); + + sprd_timer_disable(timer_of_base(to)); + return 0; +} + +static irqreturn_t sprd_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *ce = (struct clock_event_device *)dev_id; + struct timer_of *to = to_timer_of(ce); + + sprd_timer_clear_interrupt(timer_of_base(to)); + + if (clockevent_state_oneshot(ce)) + sprd_timer_disable(timer_of_base(to)); + + ce->event_handler(ce); + return IRQ_HANDLED; +} + +static struct timer_of to = { + .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK, + + .clkevt = { + .name = TIMER_NAME, + .rating = 300, + .features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = sprd_timer_shutdown, + .set_state_periodic = sprd_timer_set_periodic, + .set_next_event = sprd_timer_set_next_event, + .cpumask = cpu_possible_mask, + }, + + .of_irq = { + .handler = sprd_timer_interrupt, + .flags = IRQF_TIMER | IRQF_IRQPOLL, + }, +}; + +static int __init sprd_timer_init(struct device_node *np) +{ + int ret; + + ret = timer_of_init(np, &to); + if (ret) + return ret; + + sprd_timer_enable_interrupt(timer_of_base(&to)); + clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), + 1, UINT_MAX); + + return 0; +} + +static struct timer_of suspend_to = { + .flags = TIMER_OF_BASE | TIMER_OF_CLOCK, +}; + +static u64 sprd_suspend_timer_read(struct clocksource *cs) +{ + u32 lo, hi; + + do { + hi = readl_relaxed(timer_of_base(&suspend_to) + + TIMER_VALUE_SHDW_HI); + lo = readl_relaxed(timer_of_base(&suspend_to) + + TIMER_VALUE_SHDW_LO); + } while (hi != readl_relaxed(timer_of_base(&suspend_to) + TIMER_VALUE_SHDW_HI)); + + return ~(((u64)hi << 32) | lo); +} + +static int sprd_suspend_timer_enable(struct clocksource *cs) +{ + writel_relaxed(TIMER_VALUE_LO_MASK, + timer_of_base(&suspend_to) + TIMER_LOAD_LO); + writel_relaxed(TIMER_VALUE_HI_MASK, + timer_of_base(&suspend_to) + TIMER_LOAD_HI); + sprd_timer_enable(timer_of_base(&suspend_to), + TIMER_CTL_PERIOD_MODE|TIMER_CTL_64BIT_WIDTH); + + return 0; +} + +static void sprd_suspend_timer_disable(struct clocksource *cs) +{ + sprd_timer_disable(timer_of_base(&suspend_to)); +} + +static struct clocksource suspend_clocksource = { + .name = "sprd_suspend_timer", + .rating = 200, + .read = sprd_suspend_timer_read, + .enable = sprd_suspend_timer_enable, + .disable = sprd_suspend_timer_disable, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP, +}; + +static int __init sprd_suspend_timer_init(struct device_node *np) +{ + int ret; + + ret = timer_of_init(np, &suspend_to); + if (ret) + return ret; + + clocksource_register_hz(&suspend_clocksource, + timer_of_rate(&suspend_to)); + + return 0; +} + +TIMER_OF_DECLARE(sc9860_timer, "sprd,sc9860-timer", sprd_timer_init); +TIMER_OF_DECLARE(sc9860_persistent_timer, "sprd,sc9860-suspend-timer", + sprd_suspend_timer_init); -- cgit v1.3.1