From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- drivers/clocksource/timer-mp-csky.c | 173 ++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) create mode 100644 drivers/clocksource/timer-mp-csky.c (limited to 'drivers/clocksource/timer-mp-csky.c') diff --git a/drivers/clocksource/timer-mp-csky.c b/drivers/clocksource/timer-mp-csky.c new file mode 100644 index 000000000..183a99551 --- /dev/null +++ b/drivers/clocksource/timer-mp-csky.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. + +#include +#include +#include +#include +#include +#include + +#include "timer-of.h" + +#define PTIM_CCVR "cr<3, 14>" +#define PTIM_CTLR "cr<0, 14>" +#define PTIM_LVR "cr<6, 14>" +#define PTIM_TSR "cr<1, 14>" + +static int csky_mptimer_irq; + +static int csky_mptimer_set_next_event(unsigned long delta, + struct clock_event_device *ce) +{ + mtcr(PTIM_LVR, delta); + + return 0; +} + +static int csky_mptimer_shutdown(struct clock_event_device *ce) +{ + mtcr(PTIM_CTLR, 0); + + return 0; +} + +static int csky_mptimer_oneshot(struct clock_event_device *ce) +{ + mtcr(PTIM_CTLR, 1); + + return 0; +} + +static int csky_mptimer_oneshot_stopped(struct clock_event_device *ce) +{ + mtcr(PTIM_CTLR, 0); + + return 0; +} + +static DEFINE_PER_CPU(struct timer_of, csky_to) = { + .flags = TIMER_OF_CLOCK, + .clkevt = { + .rating = 300, + .features = CLOCK_EVT_FEAT_PERCPU | + CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = csky_mptimer_shutdown, + .set_state_oneshot = csky_mptimer_oneshot, + .set_state_oneshot_stopped = csky_mptimer_oneshot_stopped, + .set_next_event = csky_mptimer_set_next_event, + }, +}; + +static irqreturn_t csky_timer_interrupt(int irq, void *dev) +{ + struct timer_of *to = this_cpu_ptr(&csky_to); + + mtcr(PTIM_TSR, 0); + + to->clkevt.event_handler(&to->clkevt); + + return IRQ_HANDLED; +} + +/* + * clock event for percpu + */ +static int csky_mptimer_starting_cpu(unsigned int cpu) +{ + struct timer_of *to = per_cpu_ptr(&csky_to, cpu); + + to->clkevt.cpumask = cpumask_of(cpu); + + enable_percpu_irq(csky_mptimer_irq, 0); + + clockevents_config_and_register(&to->clkevt, timer_of_rate(to), + 2, ULONG_MAX); + + return 0; +} + +static int csky_mptimer_dying_cpu(unsigned int cpu) +{ + disable_percpu_irq(csky_mptimer_irq); + + return 0; +} + +/* + * clock source + */ +static u64 notrace sched_clock_read(void) +{ + return (u64)mfcr(PTIM_CCVR); +} + +static u64 clksrc_read(struct clocksource *c) +{ + return (u64)mfcr(PTIM_CCVR); +} + +struct clocksource csky_clocksource = { + .name = "csky", + .rating = 400, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .read = clksrc_read, +}; + +static int __init csky_mptimer_init(struct device_node *np) +{ + int ret, cpu, cpu_rollback; + struct timer_of *to = NULL; + + /* + * Csky_mptimer is designed for C-SKY SMP multi-processors and + * every core has it's own private irq and regs for clkevt and + * clksrc. + * + * The regs is accessed by cpu instruction: mfcr/mtcr instead of + * mmio map style. So we needn't mmio-address in dts, but we still + * need to give clk and irq number. + * + * We use private irq for the mptimer and irq number is the same + * for every core. So we use request_percpu_irq() in timer_of_init. + */ + csky_mptimer_irq = irq_of_parse_and_map(np, 0); + if (csky_mptimer_irq <= 0) + return -EINVAL; + + ret = request_percpu_irq(csky_mptimer_irq, csky_timer_interrupt, + "csky_mp_timer", &csky_to); + if (ret) + return -EINVAL; + + for_each_possible_cpu(cpu) { + to = per_cpu_ptr(&csky_to, cpu); + ret = timer_of_init(np, to); + if (ret) + goto rollback; + } + + clocksource_register_hz(&csky_clocksource, timer_of_rate(to)); + sched_clock_register(sched_clock_read, 32, timer_of_rate(to)); + + ret = cpuhp_setup_state(CPUHP_AP_CSKY_TIMER_STARTING, + "clockevents/csky/timer:starting", + csky_mptimer_starting_cpu, + csky_mptimer_dying_cpu); + if (ret) + return -EINVAL; + + return 0; + +rollback: + for_each_possible_cpu(cpu_rollback) { + if (cpu_rollback == cpu) + break; + + to = per_cpu_ptr(&csky_to, cpu_rollback); + timer_of_cleanup(to); + } + return -EINVAL; +} +TIMER_OF_DECLARE(csky_mptimer, "csky,mptimer", csky_mptimer_init); -- cgit v1.3.1