From e8dd273d199f5bbe295a8e3d8b777c5505b6b2e1 Mon Sep 17 00:00:00 2001 From: Salah Triki Date: Thu, 17 Sep 2026 14:00:52 +0100 Subject: iio: proximity: isl29501: Fix return type of isl29501_register_write isl29501_register_write() was returning a u32 instead of an int. Since the function returns negative error codes (such as -ERANGE or return values from i2c_smbus_write_byte_data()), returning an unsigned integer type prevents callers from correctly checking for negative error conditions. Fix this by changing the function return type from u32 to int. This was found through manual code review. Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.") Signed-off-by: Salah Triki Reviewed-by: Joshua Crofts Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/clocksource/timer-mediatek-cpux.c | 140 ++++++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 drivers/clocksource/timer-mediatek-cpux.c (limited to 'drivers/clocksource/timer-mediatek-cpux.c') diff --git a/drivers/clocksource/timer-mediatek-cpux.c b/drivers/clocksource/timer-mediatek-cpux.c new file mode 100644 index 000000000..a8e3df4c0 --- /dev/null +++ b/drivers/clocksource/timer-mediatek-cpux.c @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MediaTek SoCs CPUX General Purpose Timer handling + * + * Based on timer-mediatek.c: + * Copyright (C) 2014 Matthias Brugger + * + * Copyright (C) 2022 Collabora Ltd. + * AngeloGioacchino Del Regno + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include "timer-of.h" + +#define TIMER_SYNC_TICKS 3 + +/* cpux mcusys wrapper */ +#define CPUX_CON_REG 0x0 +#define CPUX_IDX_REG 0x4 + +/* cpux */ +#define CPUX_IDX_GLOBAL_CTRL 0x0 + #define CPUX_ENABLE BIT(0) + #define CPUX_CLK_DIV_MASK GENMASK(10, 8) + #define CPUX_CLK_DIV1 BIT(8) + #define CPUX_CLK_DIV2 BIT(9) + #define CPUX_CLK_DIV4 BIT(10) +#define CPUX_IDX_GLOBAL_IRQ 0x30 + +static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to) +{ + writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG); + return readl(timer_of_base(to) + CPUX_CON_REG); +} + +static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of *to) +{ + writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG); + writel(val, timer_of_base(to) + CPUX_CON_REG); +} + +static void mtk_cpux_set_irq(struct timer_of *to, bool enable) +{ + const unsigned long *irq_mask = cpumask_bits(cpu_possible_mask); + u32 val; + + val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to); + + if (enable) + val |= *irq_mask; + else + val &= ~(*irq_mask); + + mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to); +} + +static int mtk_cpux_clkevt_shutdown(struct clock_event_device *clkevt) +{ + /* Clear any irq */ + mtk_cpux_set_irq(to_timer_of(clkevt), false); + + /* + * Disabling CPUXGPT timer will crash the platform, especially + * if Trusted Firmware is using it (usually, for sleep states), + * so we only mask the IRQ and call it a day. + */ + return 0; +} + +static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt) +{ + mtk_cpux_set_irq(to_timer_of(clkevt), true); + return 0; +} + +static struct timer_of to = { + /* + * There are per-cpu interrupts for the CPUX General Purpose Timer + * but since this timer feeds the AArch64 System Timer we can rely + * on the CPU timer PPIs as well, so we don't declare TIMER_OF_IRQ. + */ + .flags = TIMER_OF_BASE | TIMER_OF_CLOCK, + + .clkevt = { + .name = "mtk-cpuxgpt", + .cpumask = cpu_possible_mask, + .rating = 10, + .set_state_shutdown = mtk_cpux_clkevt_shutdown, + .tick_resume = mtk_cpux_clkevt_resume, + }, +}; + +static int __init mtk_cpux_init(struct device_node *node) +{ + u32 freq, val; + int ret; + + /* If this fails, bad things are about to happen... */ + ret = timer_of_init(node, &to); + if (ret) { + WARN(1, "Cannot start CPUX timers.\n"); + return ret; + } + + /* + * Check if we're given a clock with the right frequency for this + * timer, otherwise warn but keep going with the setup anyway, as + * that makes it possible to still boot the kernel, even though + * it may not work correctly (random lockups, etc). + * The reason behind this is that having an early UART may not be + * possible for everyone and this gives a chance to retrieve kmsg + * for eventual debugging even on consumer devices. + */ + freq = timer_of_rate(&to); + if (freq > 13000000) + WARN(1, "Requested unsupported timer frequency %u\n", freq); + + /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */ + val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to); + val &= ~CPUX_CLK_DIV_MASK; + val |= CPUX_CLK_DIV2; + mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to); + + /* Enable all CPUXGPT timers */ + val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to); + mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL, &to); + + clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), + TIMER_SYNC_TICKS, 0xffffffff); + + return 0; +} +TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer", mtk_cpux_init); -- cgit v1.3.1