From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- drivers/clocksource/timer-keystone.c | 226 +++++++++++++++++++++++++++++++++++ 1 file changed, 226 insertions(+) create mode 100644 drivers/clocksource/timer-keystone.c (limited to 'drivers/clocksource/timer-keystone.c') diff --git a/drivers/clocksource/timer-keystone.c b/drivers/clocksource/timer-keystone.c new file mode 100644 index 000000000..fea8a4f85 --- /dev/null +++ b/drivers/clocksource/timer-keystone.c @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Keystone broadcast clock-event + * + * Copyright 2013 Texas Instruments, Inc. + * + * Author: Ivan Khoronzhuk + */ + +#include +#include +#include +#include +#include +#include + +#define TIMER_NAME "timer-keystone" + +/* Timer register offsets */ +#define TIM12 0x10 +#define TIM34 0x14 +#define PRD12 0x18 +#define PRD34 0x1c +#define TCR 0x20 +#define TGCR 0x24 +#define INTCTLSTAT 0x44 + +/* Timer register bitfields */ +#define TCR_ENAMODE_MASK 0xC0 +#define TCR_ENAMODE_ONESHOT_MASK 0x40 +#define TCR_ENAMODE_PERIODIC_MASK 0x80 + +#define TGCR_TIM_UNRESET_MASK 0x03 +#define INTCTLSTAT_ENINT_MASK 0x01 + +/** + * struct keystone_timer: holds timer's data + * @base: timer memory base address + * @hz_period: cycles per HZ period + * @event_dev: event device based on timer + */ +static struct keystone_timer { + void __iomem *base; + unsigned long hz_period; + struct clock_event_device event_dev; +} timer; + +static inline u32 keystone_timer_readl(unsigned long rg) +{ + return readl_relaxed(timer.base + rg); +} + +static inline void keystone_timer_writel(u32 val, unsigned long rg) +{ + writel_relaxed(val, timer.base + rg); +} + +/** + * keystone_timer_barrier: write memory barrier + * use explicit barrier to avoid using readl/writel non relaxed function + * variants, because in our case non relaxed variants hide the true places + * where barrier is needed. + */ +static inline void keystone_timer_barrier(void) +{ + __iowmb(); +} + +/** + * keystone_timer_config: configures timer to work in oneshot/periodic modes. + * @ mask: mask of the mode to configure + * @ period: cycles number to configure for + */ +static int keystone_timer_config(u64 period, int mask) +{ + u32 tcr; + u32 off; + + tcr = keystone_timer_readl(TCR); + off = tcr & ~(TCR_ENAMODE_MASK); + + /* set enable mode */ + tcr |= mask; + + /* disable timer */ + keystone_timer_writel(off, TCR); + /* here we have to be sure the timer has been disabled */ + keystone_timer_barrier(); + + /* reset counter to zero, set new period */ + keystone_timer_writel(0, TIM12); + keystone_timer_writel(0, TIM34); + keystone_timer_writel(period & 0xffffffff, PRD12); + keystone_timer_writel(period >> 32, PRD34); + + /* + * enable timer + * here we have to be sure that CNTLO, CNTHI, PRDLO, PRDHI registers + * have been written. + */ + keystone_timer_barrier(); + keystone_timer_writel(tcr, TCR); + return 0; +} + +static void keystone_timer_disable(void) +{ + u32 tcr; + + tcr = keystone_timer_readl(TCR); + + /* disable timer */ + tcr &= ~(TCR_ENAMODE_MASK); + keystone_timer_writel(tcr, TCR); +} + +static irqreturn_t keystone_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static int keystone_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + return keystone_timer_config(cycles, TCR_ENAMODE_ONESHOT_MASK); +} + +static int keystone_shutdown(struct clock_event_device *evt) +{ + keystone_timer_disable(); + return 0; +} + +static int keystone_set_periodic(struct clock_event_device *evt) +{ + keystone_timer_config(timer.hz_period, TCR_ENAMODE_PERIODIC_MASK); + return 0; +} + +static int __init keystone_timer_init(struct device_node *np) +{ + struct clock_event_device *event_dev = &timer.event_dev; + unsigned long rate; + struct clk *clk; + int irq, error; + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + pr_err("%s: failed to map interrupts\n", __func__); + return -EINVAL; + } + + timer.base = of_iomap(np, 0); + if (!timer.base) { + pr_err("%s: failed to map registers\n", __func__); + return -ENXIO; + } + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) { + pr_err("%s: failed to get clock\n", __func__); + iounmap(timer.base); + return PTR_ERR(clk); + } + + error = clk_prepare_enable(clk); + if (error) { + pr_err("%s: failed to enable clock\n", __func__); + goto err; + } + + rate = clk_get_rate(clk); + + /* disable, use internal clock source */ + keystone_timer_writel(0, TCR); + /* here we have to be sure the timer has been disabled */ + keystone_timer_barrier(); + + /* reset timer as 64-bit, no pre-scaler, plus features are disabled */ + keystone_timer_writel(0, TGCR); + + /* unreset timer */ + keystone_timer_writel(TGCR_TIM_UNRESET_MASK, TGCR); + + /* init counter to zero */ + keystone_timer_writel(0, TIM12); + keystone_timer_writel(0, TIM34); + + timer.hz_period = DIV_ROUND_UP(rate, HZ); + + /* enable timer interrupts */ + keystone_timer_writel(INTCTLSTAT_ENINT_MASK, INTCTLSTAT); + + error = request_irq(irq, keystone_timer_interrupt, IRQF_TIMER, + TIMER_NAME, event_dev); + if (error) { + pr_err("%s: failed to setup irq\n", __func__); + goto err; + } + + /* setup clockevent */ + event_dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + event_dev->set_next_event = keystone_set_next_event; + event_dev->set_state_shutdown = keystone_shutdown; + event_dev->set_state_periodic = keystone_set_periodic; + event_dev->set_state_oneshot = keystone_shutdown; + event_dev->cpumask = cpu_possible_mask; + event_dev->owner = THIS_MODULE; + event_dev->name = TIMER_NAME; + event_dev->irq = irq; + + clockevents_config_and_register(event_dev, rate, 1, ULONG_MAX); + + pr_info("keystone timer clock @%lu Hz\n", rate); + return 0; +err: + clk_put(clk); + iounmap(timer.base); + return error; +} + +TIMER_OF_DECLARE(keystone_timer, "ti,keystone-timer", + keystone_timer_init); -- cgit v1.3.1