From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- drivers/clocksource/timer-ep93xx.c | 189 +++++++++++++++++++++++++++++++++++++ 1 file changed, 189 insertions(+) create mode 100644 drivers/clocksource/timer-ep93xx.c (limited to 'drivers/clocksource/timer-ep93xx.c') diff --git a/drivers/clocksource/timer-ep93xx.c b/drivers/clocksource/timer-ep93xx.c new file mode 100644 index 000000000..1b719282c --- /dev/null +++ b/drivers/clocksource/timer-ep93xx.c @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cirrus Logic EP93xx timer driver. + * Copyright (C) 2021 Nikita Shubin + * + * Based on a rewrite of arch/arm/mach-ep93xx/timer.c: + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/************************************************************************* + * Timer handling for EP93xx + ************************************************************************* + * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and + * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate + * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, + * is free-running, and can't generate interrupts. + * + * The 508 kHz timers are ideal for use for the timer interrupt, as the + * most common values of HZ divide 508 kHz nicely. We pick the 32 bit + * timer (timer 3) to get as long sleep intervals as possible when using + * CONFIG_NO_HZ. + * + * The higher clock rate of timer 4 makes it a better choice than the + * other timers for use as clock source and for sched_clock(), providing + * a stable 40 bit time base. + ************************************************************************* + */ + +#define EP93XX_TIMER1_LOAD 0x00 +#define EP93XX_TIMER1_VALUE 0x04 +#define EP93XX_TIMER1_CONTROL 0x08 +#define EP93XX_TIMER123_CONTROL_ENABLE BIT(7) +#define EP93XX_TIMER123_CONTROL_MODE BIT(6) +#define EP93XX_TIMER123_CONTROL_CLKSEL BIT(3) +#define EP93XX_TIMER1_CLEAR 0x0c +#define EP93XX_TIMER2_LOAD 0x20 +#define EP93XX_TIMER2_VALUE 0x24 +#define EP93XX_TIMER2_CONTROL 0x28 +#define EP93XX_TIMER2_CLEAR 0x2c +/* + * This read-only register contains the low word of the time stamp debug timer + * ( Timer4). When this register is read, the high byte of the Timer4 counter is + * saved in the Timer4ValueHigh register. + */ +#define EP93XX_TIMER4_VALUE_LOW 0x60 +#define EP93XX_TIMER4_VALUE_HIGH 0x64 +#define EP93XX_TIMER4_VALUE_HIGH_ENABLE BIT(8) +#define EP93XX_TIMER3_LOAD 0x80 +#define EP93XX_TIMER3_VALUE 0x84 +#define EP93XX_TIMER3_CONTROL 0x88 +#define EP93XX_TIMER3_CLEAR 0x8c + +#define EP93XX_TIMER123_RATE 508469 +#define EP93XX_TIMER4_RATE 983040 + +struct ep93xx_tcu { + void __iomem *base; +}; + +static struct ep93xx_tcu *ep93xx_tcu; + +static u64 ep93xx_clocksource_read(struct clocksource *c) +{ + struct ep93xx_tcu *tcu = ep93xx_tcu; + + return lo_hi_readq(tcu->base + EP93XX_TIMER4_VALUE_LOW) & GENMASK_ULL(39, 0); +} + +static u64 notrace ep93xx_read_sched_clock(void) +{ + return ep93xx_clocksource_read(NULL); +} + +static int ep93xx_clkevt_set_next_event(unsigned long next, + struct clock_event_device *evt) +{ + struct ep93xx_tcu *tcu = ep93xx_tcu; + /* Default mode: periodic, off, 508 kHz */ + u32 tmode = EP93XX_TIMER123_CONTROL_MODE | + EP93XX_TIMER123_CONTROL_CLKSEL; + + /* Clear timer */ + writel(tmode, tcu->base + EP93XX_TIMER3_CONTROL); + + /* Set next event */ + writel(next, tcu->base + EP93XX_TIMER3_LOAD); + writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE, + tcu->base + EP93XX_TIMER3_CONTROL); + return 0; +} + +static int ep93xx_clkevt_shutdown(struct clock_event_device *evt) +{ + struct ep93xx_tcu *tcu = ep93xx_tcu; + /* Disable timer */ + writel(0, tcu->base + EP93XX_TIMER3_CONTROL); + + return 0; +} + +static struct clock_event_device ep93xx_clockevent = { + .name = "timer1", + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = ep93xx_clkevt_shutdown, + .set_state_oneshot = ep93xx_clkevt_shutdown, + .tick_resume = ep93xx_clkevt_shutdown, + .set_next_event = ep93xx_clkevt_set_next_event, + .rating = 300, +}; + +static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) +{ + struct ep93xx_tcu *tcu = ep93xx_tcu; + struct clock_event_device *evt = dev_id; + + /* Writing any value clears the timer interrupt */ + writel(1, tcu->base + EP93XX_TIMER3_CLEAR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static int __init ep93xx_timer_of_init(struct device_node *np) +{ + int irq; + unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL; + struct ep93xx_tcu *tcu; + int ret; + + tcu = kzalloc_obj(*tcu); + if (!tcu) + return -ENOMEM; + + tcu->base = of_iomap(np, 0); + if (!tcu->base) { + pr_err("Can't remap registers\n"); + ret = -ENXIO; + goto out_free; + } + + ep93xx_tcu = tcu; + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + ret = -EINVAL; + pr_err("EP93XX Timer Can't parse IRQ %d", irq); + goto out_free; + } + + /* Enable and register clocksource and sched_clock on timer 4 */ + writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, + tcu->base + EP93XX_TIMER4_VALUE_HIGH); + clocksource_mmio_init(NULL, "timer4", + EP93XX_TIMER4_RATE, 200, 40, + ep93xx_clocksource_read); + sched_clock_register(ep93xx_read_sched_clock, 40, + EP93XX_TIMER4_RATE); + + /* Set up clockevent on timer 3 */ + if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer", + &ep93xx_clockevent)) + pr_err("Failed to request irq %d (ep93xx timer)\n", irq); + + clockevents_config_and_register(&ep93xx_clockevent, + EP93XX_TIMER123_RATE, + 1, + UINT_MAX); + + return 0; + +out_free: + kfree(tcu); + return ret; +} +TIMER_OF_DECLARE(ep93xx_timer, "cirrus,ep9301-timer", ep93xx_timer_of_init); -- cgit v1.3.1