From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- drivers/clocksource/timer-clint.c | 277 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 277 insertions(+) create mode 100644 drivers/clocksource/timer-clint.c (limited to 'drivers/clocksource/timer-clint.c') diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c new file mode 100644 index 000000000..0bdd9d7ec --- /dev/null +++ b/drivers/clocksource/timer-clint.c @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Western Digital Corporation or its affiliates. + * + * Most of the M-mode (i.e. NoMMU) RISC-V systems usually have a + * CLINT MMIO timer device. + */ + +#define pr_fmt(fmt) "clint: " fmt +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifndef CONFIG_RISCV_M_MODE +#include +#endif + +#define CLINT_IPI_OFF 0 +#define CLINT_TIMER_CMP_OFF 0x4000 +#define CLINT_TIMER_VAL_OFF 0xbff8 + +/* CLINT manages IPI and Timer for RISC-V M-mode */ +static u32 __iomem *clint_ipi_base; +static unsigned int clint_ipi_irq; +static u64 __iomem *clint_timer_cmp; +static u64 __iomem *clint_timer_val; +static unsigned long clint_timer_freq; +static unsigned int clint_timer_irq; + +#ifdef CONFIG_RISCV_M_MODE +u64 __iomem *clint_time_val; +EXPORT_SYMBOL(clint_time_val); +#endif + +#ifdef CONFIG_SMP +static void clint_send_ipi(unsigned int cpu) +{ + writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu)); +} + +static void clint_clear_ipi(void) +{ + writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id())); +} + +static void clint_ipi_interrupt(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); + + clint_clear_ipi(); + ipi_mux_process(); + + chained_irq_exit(chip, desc); +} +#endif + +#ifdef CONFIG_64BIT +#define clint_get_cycles() readq_relaxed(clint_timer_val) +#else +#define clint_get_cycles() readl_relaxed(clint_timer_val) +#define clint_get_cycles_hi() readl_relaxed(((u32 *)clint_timer_val) + 1) +#endif + +#ifdef CONFIG_64BIT +static u64 notrace clint_get_cycles64(void) +{ + return clint_get_cycles(); +} +#else /* CONFIG_64BIT */ +static u64 notrace clint_get_cycles64(void) +{ + u32 hi, lo; + + do { + hi = clint_get_cycles_hi(); + lo = clint_get_cycles(); + } while (hi != clint_get_cycles_hi()); + + return ((u64)hi << 32) | lo; +} +#endif /* CONFIG_64BIT */ + +static u64 clint_rdtime(struct clocksource *cs) +{ + return clint_get_cycles64(); +} + +static struct clocksource clint_clocksource = { + .name = "clint_clocksource", + .rating = 300, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .read = clint_rdtime, +}; + +static int clint_clock_next_event(unsigned long delta, + struct clock_event_device *ce) +{ + void __iomem *r = clint_timer_cmp + + cpuid_to_hartid_map(smp_processor_id()); + + csr_set(CSR_IE, IE_TIE); + writeq_relaxed(clint_get_cycles64() + delta, r); + return 0; +} + +static DEFINE_PER_CPU(struct clock_event_device, clint_clock_event) = { + .name = "clint_clockevent", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 100, + .set_next_event = clint_clock_next_event, +}; + +static int clint_timer_starting_cpu(unsigned int cpu) +{ + struct clock_event_device *ce = per_cpu_ptr(&clint_clock_event, cpu); + + ce->cpumask = cpumask_of(cpu); + clockevents_config_and_register(ce, clint_timer_freq, 100, ULONG_MAX); + + enable_percpu_irq(clint_timer_irq, + irq_get_trigger_type(clint_timer_irq)); + enable_percpu_irq(clint_ipi_irq, + irq_get_trigger_type(clint_ipi_irq)); + return 0; +} + +static int clint_timer_dying_cpu(unsigned int cpu) +{ + disable_percpu_irq(clint_timer_irq); + /* + * Don't disable IPI when CPU goes offline because + * the masking/unmasking of virtual IPIs is done + * via generic IPI-Mux + */ + return 0; +} + +static irqreturn_t clint_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evdev = this_cpu_ptr(&clint_clock_event); + + csr_clear(CSR_IE, IE_TIE); + evdev->event_handler(evdev); + + return IRQ_HANDLED; +} + +static int __init clint_timer_init_dt(struct device_node *np) +{ + int rc; + u32 i, nr_irqs; + void __iomem *base; + struct of_phandle_args oirq; + + /* + * Ensure that CLINT device interrupts are either RV_IRQ_TIMER or + * RV_IRQ_SOFT. If it's anything else then we ignore the device. + */ + nr_irqs = of_irq_count(np); + for (i = 0; i < nr_irqs; i++) { + if (of_irq_parse_one(np, i, &oirq)) { + pr_err("%pOFP: failed to parse irq %d.\n", np, i); + continue; + } + + if ((oirq.args_count != 1) || + (oirq.args[0] != RV_IRQ_TIMER && + oirq.args[0] != RV_IRQ_SOFT)) { + pr_err("%pOFP: invalid irq %d (hwirq %d)\n", + np, i, oirq.args[0]); + return -ENODEV; + } + + /* Find parent irq domain and map ipi irq */ + if (!clint_ipi_irq && + oirq.args[0] == RV_IRQ_SOFT && + irq_find_host(oirq.np)) + clint_ipi_irq = irq_of_parse_and_map(np, i); + + /* Find parent irq domain and map timer irq */ + if (!clint_timer_irq && + oirq.args[0] == RV_IRQ_TIMER && + irq_find_host(oirq.np)) + clint_timer_irq = irq_of_parse_and_map(np, i); + } + + /* If CLINT ipi or timer irq not found then fail */ + if (!clint_ipi_irq || !clint_timer_irq) { + pr_err("%pOFP: ipi/timer irq not found\n", np); + return -ENODEV; + } + + base = of_iomap(np, 0); + if (!base) { + pr_err("%pOFP: could not map registers\n", np); + return -ENODEV; + } + + clint_ipi_base = base + CLINT_IPI_OFF; + clint_timer_cmp = base + CLINT_TIMER_CMP_OFF; + clint_timer_val = base + CLINT_TIMER_VAL_OFF; + clint_timer_freq = riscv_timebase; + +#ifdef CONFIG_RISCV_M_MODE + /* + * Yes, that's an odd naming scheme. time_val is public, but hopefully + * will die in favor of something cleaner. + */ + clint_time_val = clint_timer_val; +#endif + + pr_info("%pOFP: timer running at %ld Hz\n", np, clint_timer_freq); + + rc = clocksource_register_hz(&clint_clocksource, clint_timer_freq); + if (rc) { + pr_err("%pOFP: clocksource register failed [%d]\n", np, rc); + goto fail_iounmap; + } + + sched_clock_register(clint_get_cycles64, 64, clint_timer_freq); + + rc = request_percpu_irq(clint_timer_irq, clint_timer_interrupt, + "clint-timer", &clint_clock_event); + if (rc) { + pr_err("registering percpu irq failed [%d]\n", rc); + goto fail_iounmap; + } + +#ifdef CONFIG_SMP + rc = ipi_mux_create(BITS_PER_BYTE, clint_send_ipi); + if (rc <= 0) { + pr_err("unable to create muxed IPIs\n"); + rc = (rc < 0) ? rc : -ENODEV; + goto fail_free_irq; + } + + irq_set_chained_handler(clint_ipi_irq, clint_ipi_interrupt); + riscv_ipi_set_virq_range(rc, BITS_PER_BYTE); + clint_clear_ipi(); +#endif + + rc = cpuhp_setup_state(CPUHP_AP_CLINT_TIMER_STARTING, + "clockevents/clint/timer:starting", + clint_timer_starting_cpu, + clint_timer_dying_cpu); + if (rc) { + pr_err("%pOFP: cpuhp setup state failed [%d]\n", np, rc); + goto fail_free_irq; + } + + return 0; + +fail_free_irq: + free_percpu_irq(clint_timer_irq, &clint_clock_event); +fail_iounmap: + iounmap(base); + return rc; +} + +TIMER_OF_DECLARE(clint_timer, "riscv,clint0", clint_timer_init_dt); +TIMER_OF_DECLARE(clint_timer1, "sifive,clint0", clint_timer_init_dt); -- cgit v1.3.1